jdwede

Jeff Smith

Needed a pool hook to pull my robot pool vacuum out of the pool. When it comes up out of the water, it&#39;s full of water so very heavy. Pull straight up and this pulls my robot vacuum out with no issue.

Pool Hook

pool

craigandrews

My new keyboard came without keycaps so I decided to make some. Through a lot of trial and error, I learned how to create some nice keycaps - and that&#39;s what this model does. You can learn more about how I arrived at this point and some alternative approaches that may work better for your specific needs and objectives at <a target="_blank" href="https://candrews.integralblue.com/2024/03/3d-printing-high-quality-keycaps/" rel="nofollow noopener">https://candrews.integralblue.com/2024/03/3d-printing-high-quality-keycaps/</a>The 45-degree rotated orientation is harder to print (as there&#39;s only a tiny bit of the keycap touching the built plate), requires support (it produces waste and the support can be annoying to remove), and requires a lot more filament changes to print colored legends. So why use this orientation?The 45-degree angle orientation produces a much higher quality keycap top surface. With this orientation, the concave keycap top is smooth without visible (well, only visible with a bright light and very close look) or feelable layer lines, especially when using a 0.2mm nozzle. For the best, highest-quality printed keycaps, this orientation is the way to go.Adhesion is the biggest challenge, so any tricks to improve adhesion should be applied, including:<ul><li>Using a brim</li><li>Reducing the brim-object gap</li><li>Slowing speeds</li><li>Increasing the initial layer height</li></ul>The orientation is critical. The stem must have a solid part on the bottom. In other words, the slit that goes through the stem must be horizontal. Otherwise, there will be nothing for the support to hold, and the stem will fail to print likely resulting in spaghetti.The keycap model was generated using <a target="_blank" href="https://openscad.org/" rel="nofollow noopener">OpenSCAD</a> and <a target="_blank" href="https://github.com/rsheldiii/KeyV2/" rel="nofollow noopener">KeyV2</a> using this code:&nbsp;include &lt;./includes.scad&gt;$stem_inner_slop = 0.0; $cherry_bevel = false; bar_support() rounded_cherry() row_profile(&#34;mt3&#34;) no_stem_support() rotate([0,45,0]) { key(true); }&nbsp;You can now produce custom keycaps that look and feel great! Besides artisans, it&#39;s very much doable to produce an entire keyboard in a unique color for a very personalized look.

High Quality Keycap Printed at a 45 Degree Angle

Keycaps

Kbfly

The ultimate solution for quick and easy labeling without the fuss of tape! Gone are the days of sticky residue and peeling labels. Our innovative design features clip-on labels that effortlessly attach to the top of your switch covers.No more struggling with tape or worrying about damaging your walls. Simply snap our labels onto your switch covers and voila! Instant organization and clarity for every switch in your home.Crafted with clear, legible text and universally recognized symbols, our labels make it a breeze for everyone in your household to navigate the light switches with ease.Built to last, our durable labels ensure longevity and reliability, staying securely in place even with daily use. Say hello to a more organized and stress-free home with our Light Switch Labels – the clip-on solution you never knew you needed!Small light switch labels.&nbsp;Low bulb + High bulb + Fan + Overhead bulb + Furnace + Heater + garbage disposalPrinted with 3-4 colors.gray. black. yellow. white. red&nbsp;&nbsp;

Light Switch Labels + More

To Print

Bedroom

UniversalMaker

Introducing the Ultimate Bathroom Hook Collection—a versatile and practical solution for organizing your bathroom essentials such as toothbrushes, razors, and more. This comprehensive collection includes a variety of hooks designed to accommodate different items, ensuring that everything has its place in your bathroom. Say goodbye to cluttered countertops and drawers as you hang your toothbrushes, razors, loofahs, and other grooming accessories with ease. With its durable construction and stylish design, the Ultimate Bathroom Hook Collection adds both functionality and aesthetics to your bathroom space. Keep your essentials within reach and your bathroom clutter-free with this essential collection.&nbsp;<h3>Mounting</h3><ul><li>Use thin double sided tape on the backside</li><li>Thanks to the big back surface this mounts quite firm! </li></ul>

Ultimate Bathroom Hook Collection

Bathroom

dugy58

I made these in fusion 360 with a little help from Tinkercad. The 3mf has enough for two.which will allow 6 shirts or pants each. The hooks snap in snugly. Nice space savers.

Space saver Hangar

Office

Sneaker

@Repkord on Printables created this. I uploaded it under the Share model and will receive no points for downloads. The description is copied from the Printables page. Any donate or affiliate links go directly to @Repkord.&nbsp;----&nbsp;Welcome to RepRack! A modular, inexpensive, functional, easy to source, mass filament storage and spool holder system. Wall mountable or for use on the desktop. RepBox compatible. All source files are included to either 3D print or laser cut your own. The rail system is compatible with our new <a target="_blank" href="https://www.prusaprinters.org/prints/135700-slip-rod-cover-for-reprack-and-repbox" rel="nofollow noopener">slip rod covers</a> allowing you to print directly from the rack in any number of configurations.&nbsp;To give you a sense of expense a 10 foot long RepRack holds ~50 spools and costs about $20 or so in materials depending on how you decide to make it.&nbsp;<a target="_blank" href="https://www.repkord.com/products/reprack-starter-kits" rel="nofollow noopener">If you prefer to buy starter kits directly from Repkord rather than make yourself you may do so here</a>&nbsp;Ready to make your own? Read on:&nbsp;The hallmark of the RepRack system is its versatility. You may wish to use it for storing large amounts of filament spools neatly on your walls. Perhaps you want a small rack to hang above your printer that you can print directly from. Maybe desktop use with anti-skid feet is your preference? Perhaps you want a rack you can load and unload from your <a target="_blank" href="https://www.repkord.com/collections/repbox-2/products/repbox-2-the-3d-printing-spool-management-solution" rel="nofollow noopener">RepBox</a>… we've got you covered there too.Take a look at the photos to get a sense of how the system works. You can print or laser cut as many or as few of the RackHangers as you need. If you are printing them we HIGHLY recommend using the thickest nozzle you can as that will greatly increase the part strength. Locate the hangers everywhere you can anchor it to a wall stud or something secure. For hanging options you may use continuous french cleat strips or the provided individual brackets. If using printable brackets again use the thickest extrusion you can for the most strength and locate them closer together. Laser cut hangers may be spaced up to 32" apart OC typically if using ¼" thick (6mm) material. For laser cutting we recommend melamine or plywood. Never plain MDF. 3/16" (4-5mm) May also be suitable if used in closer spans. When in doubt, more is better.<h4>BILL OF MATERIALS</h4>Non-Printable Parts:<ul><li>½" EMT (~19mm Outer Diameter pipe) Conduit commonly found at local hardware supply stores like <a target="_blank" href="https://www.homedepot.com/p/1-2-in-x-10-ft-Electric-Metallic-Tube-EMT-Conduit-853428/100400405" rel="nofollow noopener">Home Depot</a>, Lowes, ACE, or other regional home stores. In addition you may be able to source it at any local Electrical supply store. Simply cut to length using a standard pipe cutter, hacksaw, abrasive cutoff wheel or similar metal cutting tool. Often times home stores can cut to length for you if you plan what you need ahead of time.</li><li>#6 x 5/8" (16mm) Thread Forming Screws for Plastics… also known as Plastite screws. These screws work really well fastening 3D printed parts to other materials. If you need a source for these <a target="_blank" href="https://www.repkord.com/products/6-x-5-8-16mm-thread-forming-screws-for-plastics-50-pack" rel="nofollow noopener">Repkord sells them in packs of 50 here</a>.</li><li>#8 x 3" (75mm) Wood screws for anchoring cleats to wall. You'll need at least two per printable cleat, less if you cut your own cleats. The total number needed will of course depend on how long your RepRack installation is. We HIGHLY recommend anchoring into studs or solid material. Wall anchors may be used as well but you will need to decide how many and what spacing is appropriate for the load intended.</li><li>Optional French cleat… see the provided drawing below for cutting your own french cleat strips. You will need to drill and countersink your cleat at whatever intervals you decide are appropriate for proper anchoring to the wall. <a target="_blank" href="https://www.repkord.com/collections/repbox-2/products/repkord-wall-mount-kit" rel="nofollow noopener">Wall mount kits with a 485mm (19") long cleat and fasteners are available from Repkord here.</a></li></ul>Printable / Laser Cuttable Parts (USE PETG FOR BEST RESULTS):<ul><li>Hanger Sides… at least 2 but as many as you need for the length of rack you're trying to build.</li><li>Rod Clamps… for laser cut hangers you'll want two clamps per hanger. There's an option to use the “U” style if you decide to clamp the pipe to the bracket after you've already run the pipe through it. Its sometimes easier to get your wall mount spacing right this way. The standard clamps are a bit more robust but you need to attach them prior to threading the rod through the hanger holes.</li><li>Optional Printed single wall mounts… If you're not using continuous runs of french cleat you'll need as many of these as you have hangers. Print them using the thickest extrusion you can for maximum part strength.</li></ul>Optional Add-Ons:<ul><li><a target="_blank" href="https://www.prusaprinters.org/prints/129972-rackstand-repwinder-stand-for-repbox-231-and-repra" rel="nofollow noopener">Rack stands / RepWinder stands </a>- Go here for the cardboard spool / <a target="_blank" href="https://www.prusaprinters.org/prints/6174-repwinder-v214" rel="nofollow noopener">RepWinder</a> stand solution compatible with <a target="_blank" href="https://www.repkord.com/products/repbox-2-the-3d-printing-spool-management-solution" rel="nofollow noopener">RepBox 2.3.1</a> and up and RepRack.</li><li><a target="_blank" href="https://www.prusaprinters.org/prints/131429-rackroller-open-source-flange-roller-add-on-for-re" rel="nofollow noopener">Rack Rollers / RepBox Compatible Bearing Flange Rollers</a></li><li><a target="_blank" href="https://www.prusaprinters.org/prints/135700-slip-rod-cover-for-reprack-and-repbox" rel="nofollow noopener">Slip Rod Cover for EMT for printing directly from the pipes</a></li><li><a target="_blank" href="https://www.repkord.com/products/repkord-wall-mount-kit" rel="nofollow noopener">French Cleats for RepBox, RepWinder, RepRack, and Catch Bin kits.</a></li></ul>Files are available to all. We appreciate your recognition of our brand as the creator of this system and are very excited to see how you use it. Remixing for personal use is allowed but we do kindly request that you maintain our branding if doing so. Your support of our company allows us to continue to create and share projects like this with the community. If you would like to see more open source contributions like this from us please consider donating whatever amount you feel is fair to help our efforts here: <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=2C3K3DV44QAFQ" rel="nofollow noopener">https://www.paypal.com/donate/?hosted_button_id=2C3K3DV44QAFQ</a>&nbsp;By no means is this required but it is ALWAYS appreciated.

RepRack: Open Source Spool Holder And Storage System by Repkord

Filament Storage

ponyaferencdaniel

Counter Strike - Butterfly Knife

Toys

Josh-3D

This is a version of my sci-fi case, sized to work with the [BaBo] system (8x6 units → <a target="_blank" href="https://makerworld.com/en/@Willi3D/collections/666866" rel="nofollow noopener">Willi 3D&#39;s BaBo Collection).</a> I liked the insets! The prototype versions of this case I&#39;ve already been using to hold printer tools, and so it just seem natural. They work and look great together.   It&#39;s a tight fit on build plate! I recommend printing the case portion with some sort of support to help the curves print nicer. It uses 16 M3x10 screws, 4 4x6 round bar magnets, and a piece of filament for the hinge! Pictures of my model feature Bambu PLA Basic green, PLA Matte charocal, and Polyterra&#39;s Muted white!&nbsp;Here&#39;s a link where you can purchase the magnets on the <a target="_blank" href="https://www.amazon.com/gp/product/B075PMYRFT/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;psc=1" rel="nofollow noopener">US Amazon store.</a>&nbsp;&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buy Me a Coffee</a>

Scifi Container - Bambu & [BaBo] Edition

Containers

Gridfinity baseplate for the <a target="_blank" href="https://www.upliftdesk.com/slim-under-desk-storage-drawer-by-uplift-desk/" rel="nofollow noopener">Uplift Desk Slim Drawer</a>.

Gridfinity Uplift Desk Slim Drawer

Gridfinity

Remix of the original keychain model (https://makerworld.com/en/models/68130#profileId-79094):&nbsp;Makes for great wall art, coaster, magnet.<ul><li>Removed keychain ring</li><li>Fits two 8x2mm magnets</li><li>Scaled up a bit</li></ul>If you don't have two 8x2mm magnets, you can edit the size of the magnet holes in Bambu Studio by adjusting the size of the negative cylinder (Process → Objects → Scale). Or you can just use superglue to attach the magnets directly to the back of the model.&nbsp;

Nike Air Jordan 1 Magnet

Magnets

Stephanos

<h2>NEW V2 NOW AVAILABLE!</h2><h4>Improvements:</h4><ul><li>New angled blade, allows for better ergonomics and comfort scraping at a lower angle</li><li>No supports needed</li><li>Added hole for hanging</li><li>New long handle version</li><li>Improved tolerances</li><li>Combined print profiles for Default, M3, and M3 insert versions</li></ul>STEP files for the new V2 short and long handles are also now available—&nbsp;AboutI wasn't able to find a scraper handle that I liked so I decided to make my own. Made to work with common plastic blades which can be bought and replaced for cheap. Handle allows for tool-less swapping of blades with a satisfying click in place.&nbsp;This handle makes use of the screws for the Bambu scraper that comes included with your printer. If you do not have them (or want to make more scrapers), an alternative version for M3 screws as well as M3 inserts is also provided.&nbsp;If none of the above works for you, I have additionally provided the STEP files for you to remix and customize to your liking.<h3>Notes:</h3>The new V2 blade clamp prints standing up at an angle, please ensure your bed is clean and has good adhesion prior to printing.<figure class="image image_resized" style="width:25.59%;"><img src="https://makerworld.bblmw.com/makerworld/draft/734493/2024-03-12_a49974fae1833.jpg"></figure><h3>Assembly</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/734493/2024-03-19_7a698af830df4.gif"></figure>&nbsp;<h3>The Blades:</h3>Printed blades aren't as durable as the injection molded razor blades and it is much cheaper and economical to buy a pack of blades rather than printing them out which is why I have not provided a model of the blade as part of the print profile. You can find these razor blades through Amazon, AliExpress or maybe even your local home hardware store. Note it is much cheaper to buy from AliExpress, but you will need to wait for shipping. Prices and availability may vary depending on where you live.&nbsp;Amazon (Canada)<img src="https://makerworld.bblmw.com/makerworld/draft/734493/2024-03-12_6413e3807416.png">AliExpress<img src="https://makerworld.bblmw.com/makerworld/draft/734493/2024-03-12_7e02ec478f51b.png"><h3>Changelog</h3>2024-02-24 - Initial upload2024-02-27 - Added assembly instructions2024-03-01 - Added 0.12mm profile2024-03-12 - Upload new V2 version2024-03-19 - Update assembly animation<h3>New larger version now available</h3><a target="_blank" href="https://makerworld.com/en/models/207326#profileId-227447" rel="nofollow noopener">https://makerworld.com/en/models/207326#profileId-227447</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/734493/2024-02-26_db56680f7dbd2.png">&nbsp;

Scraper handle V2 for plastic blades

Tools

GreedyGoblin

air jordan keychain&nbsp;NEW TRAVIS SCOTT VERSION AVAILABLE: <a target="_blank" href="https://makerworld.com/en/models/471909#profileId-381630" rel="nofollow noopener">https://makerworld.com/en/models/471909#profileId-381630</a>&nbsp;THANKS FOR ALL THE SUPPORT!

Air jordan keychain

Keychains

Mrtk1970

This i a holder for <a target="_blank" href="https://makerworld.com/en/models/60890#profileId-63102" rel="nofollow noopener">https://makerworld.com/en/models/60890#profileId-63102</a>I remixed avidus's and dtphantom design , in order to be mounted on the Ikea Skådis peg board.I have made one size per plate, and one with all sizesMake sure you have a good grip on the build plate. I use Textured pei plate, with 65*I have made holder for:<ul><li>5mm</li><li>6mm</li><li>8mm</li><li>10mm</li></ul>

Skådis Skadis Magnet Dispenser Mount 5-6-8-10mm

IKEA Skadis

lastwaun

Standard deck of cards (52 cards) plus two jokers. This also includes a case for the cards that needs to be folded into the box shape. The cards are plenty flexible and can eaily be shuffled and they bridge well! I found the textured PEI sheet to give a nice feel in the hands and keeps cards from sticking to eachother. I found PLA to work just fine for the cards - plenty flexible and per ususal easy to work with. The cards also shuffle extremely well and even bridge! I first tried the box as PLA but it quickly broke after too many bends of the lid so I made it out of PETG next time and so far it's held up just fine.&nbsp;The 0.2mm nozzle allowed for fine detail and thin layers. In my testing I found that having 2 layers of the color was just right - not going to peak through but also enoough to be plenty visible so I used 0.06mm layer height.I also found that slowing down the first layer and starting with black ensured good first layers.&nbsp;<a target="_blank" href="https://imgur.com/gallery/A5i34lz" rel="nofollow noopener">Here is a video</a> of the cards being shuffled.&nbsp;&nbsp;

Waterproof Playing Cards

Games

maker_f

<h2>Vultures 1 ¥$ Kanye West </h2>The newest album is here!AMS ready but if you want you can print on a single color printer by doing the following filament swaps:Set the layer height to 0.08mm and a base layer of 0.16mm, only one wall and infill to 100% then:&nbsp;For the white mask one:<ul><li>Start with black</li><li>Swap to orange at layer 5(0.48mm)</li><li>Swap to white at layer 14(1.20mm)</li></ul>For the blackmask one:<ul><li>Start with black</li><li>Swap to orange at layer 5(0.48mm)</li><li>Swap to white at layer 17(1.44mm)</li></ul>Ironing is active but adds some time to the print, they come out amazing even with no ironing so it's on you!Happy printing and don't forget to show your creations!

Vultures 1 ¥$  Kanye West album cover - hueforge

Album Covers

ShakaStudio

At Lunar New Year, it's tradition to give the gift of a bright, beautiful red envelope (known as 紅包, hóngbāo) to your friends and family. But not just any old envelope. These are filled with money - and symbolize good wishes and luck for the new year ahead.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/389120/2024-01-10_d8e8a2d32e2b4.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/389120/2024-01-10_e9f32e55a2ca3.gif"></figure><ul><li>These are print in place models which have been designed to fold and tuck to assemble.</li><li>No glue or tape needed</li><li>Assembled dimensions - 180mm x 80mm</li><li>It will fit currency notes from most countries</li><li>Can be printed with AMS and no AMS</li><li>Total thickness of the printed model is 0.8mm</li><li>Lightweight and easy to print</li><li>1 hour print time and 20gm filament for each envelope</li><li>Only 2 colors</li></ul>Color Schemes :<ul><li>Feel free to experiment with any colors</li><li>I have used Red and Yellow</li><li>RED → YELLOW</li><li>RED → GOLD</li><li>RED → PURPLE</li><li>Use Silk Filament for extra shine</li></ul>Print Instructions :<ul><li>Make sure the build plate is cleansed with soap water/ isopropyl alcohol for perfect adhesion</li><li>Use Standard 0.2mm profile with no prime tower</li><li>Start with RED</li><li>At layer #3 (0.6mm) swap to GOLD/ YELLOW/ PURPLE for the rest.</li></ul>&nbsp;Assembly:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/389120/2024-01-10_6e396889cae5.jpg"></figure>Step 1 : FOLD along the long edges and tuck the tab inwards :<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/389120/2024-01-10_03179c4813ab1.jpg"></figure>Step 2: Tuck in the Bottom Tabs<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/389120/2024-01-10_01c55152567bb.jpg"></figure>&nbsp;Source for the design image is from online retail store Temu.

Red Envelope Pack - 新年红包 - Year of the dragon

Gifts

3Deekes

I used TinkerCad to create this frame that is compatible with my Hueforges&nbsp;This way you can display your prints without going out to buy frames :)&nbsp;Have fun !&nbsp;Reminder : I share these works for free for hobbyists, you can even print them as gifts for friend and family.If you like my work: a Boost on Makerworld is always appreciated!&nbsp;Or if you want you could give me a tip or &#34;buy me a coffee&#34; on :  <a target="_blank" href="https://ko-fi.com/3deekes" rel="nofollow noopener">https://ko-fi.com/3deekes</a>&nbsp;If you are interested in selling any of my current and future releases send me a message to info@3deekes.be

(Hueforge) Frame 180x180

sipura

Hello,&nbsp;Our new magsafe wireless charger and phone holder.  We wanted something different, and something that catches the eye even when you see the wireless charger from the back while it's on the table.&nbsp;The holder fits the original Apple magsafe, we don't know about other models!Also you need phone case with magsafe, or put phone without case.&nbsp;Printed all with PLA, easy to assemble.&nbsp;To assemble you need:2 pcs M3x10mm screws2 pcs threaded inserts M3x40&nbsp;Keep in mind that you are printing according to the default settings, because the model is made to fit tight inside, and that you do not need to glue the magsafe to the stand.&nbsp;&nbsp;Follow the assembly instructions as in the pictures below<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/467311/2024-01-28_18282a949fdd9.jpg"></figure>&nbsp;&nbsp;Enjoy printing and using this magsafe wireless charger :D&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/467311/2024-01-28_dd35a5934469e.png" alt="Ikona Potvrdila zajednica"></figure>  <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/467311/2024-01-28_2984d904ba762.png" alt="Ikona Potvrdila zajednica"></figure>  &nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/467311/2024-01-28_5a566b2cc13d1.png" alt="Ikona Potvrdila zajednica"></figure>&nbsp;&nbsp;  <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/467311/2024-01-28_f421bb3b43bbf.png" alt="Ikona Potvrdila zajednica"></figure>&nbsp;&nbsp;

Cyber icharger

MagSafe

TrendtB

Make your kitchen herb gardening easy - ideal for busy cooks and gardening enthusiasts, this planter ensures your herbs stay hydrated and fresh, even on your busiest days. If you're an avid cook, or know someone that is - start printing now and add a touch of green to those kitchen counters!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/323633/2023-12-29_27004b97fd569.gif"><figcaption>Make various patterns and arrangements with multiple planters</figcaption></figure>&nbsp;Inspired by my wife's passion for cooking with fresh herbs, this planter is designed to blend seamlessly into any kitchen aesthetic. Perfect for those who appreciate both functionality and style in their cooking space.&nbsp;<h3>KEY FEATURES</h3><ul><li>Easy Self-Watering: Built-in reservoir keeps herbs hydrated.</li><li>Artistic Design: Intricate floral pattern forming a love heart, adding a decorative touch.</li><li>Dual-Purpose Base: Use a standalone base as a stylish container for herb gardening tools.</li><li>Batch Printing Profiles: Optimized for quick and efficient batch printing.</li></ul>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/323633/2023-12-29_0b77f080a19a4.gif"><figcaption>The floral design allows you to play with different patterns depending on how the planter is placed.</figcaption></figure>&nbsp;&nbsp;<h3>HOW IT WORKS</h3>The planter is designed to slowly absorb water from the reservoir (base), which you occasionally top up with water. There is a seam that acts as a guide for how far to fill. Don't fill over this line or water will be pushed out through the top!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/323633/2023-12-29_f7d43224f4262.gif"><figcaption>The base acts as a reservoir of water - fill to just below the seam then place your plant on top</figcaption></figure>&nbsp;When you're planting your herb in the top half, it is recommended to use a wicking material at the very bottom. This helps to slowly absorb water into the soil and roots. You can place a couple of cotton balls / cotton wool in the bottom of the pot to do this. Then fill with soil, and your herb of choice.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/323633/2023-12-29_d13556ba7b91.gif"><figcaption>Place cotton wool into the bottom of the pot to act as a wicking material.</figcaption></figure>&nbsp;&nbsp;<h3>PRINT SETTINGS</h3>Use the designer profiles to ensure the base is water-tight, or you'll risk water seeping through the print! If you're looking to adjust the profile, or build your own - these are the key settings to maintain ensure there are no leaks:<ul><li>Infill overlap: 50%</li><li>Walls: 3</li><li>Top shell layers: 5</li></ul>Additional profiles have been provided to batch print, or print using a single plate and color.

Self-watering Herb Planter for the kitchen

Kitchen

bonfiggy

Perfect fitting antivibration feet printed in TPU with 15-20% infill for best results. No supports needed! Seems to help a good bit as well with the shaking/noise and a lot less printer wobble as well :)