jaydeland

OVERTURE Filament

We&#39;re know we&#39;re a little late to the airless ball trend, but we love soccer and these airless balls really do work. Try it for yourself!&nbsp;PLEASE READ<ul><li>Download the 50% profile or scale to 100% for full size ball.</li><li>Ball measures 215mm in diameter and uses less than &lt;500g of filament</li><li>Overture TPU can be printed much faster, however slower speeds result in cleaner features and better support removal. Changing the volumetric speed to 2mm^3/s will yield better results.<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000498713/design/2024-06-17_b44e0f0007adb.png"></li></ul></li><li>TPU support are very rugged and require some force to remove! Use a pair of pliers or vise grips to remove.</li></ul>Comment if you have questions!- Overture Team&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000498713/design/2024-06-26_0e94c034f89a4.gif">&nbsp;

Airless Soccer Ball

Sports

Meyerhouse

Print all four pieces to make a 16 inch board. At pauses add magnets to have magnets imbedded into board so you do no have to use glue to hold the magnets in place. I still glued the board together on the dovetails with epoxy. You will want to buy 18mm by 5mm magnets on amazon or wherever you would find magnets that size to put into board

16 inch chess board with magnets inside for box 

Chess

OrangeSs

A beautiful VW beetle keychain.Printed with 0.4 nozzle but I recommend using 0.2 nozzle for better print quality.&nbsp;Check out other VW related keychains that I&#39;ve made:Collection of all my keychains with free commercial license so You can sell all the prints You make!Check it out here:<a target="_blank" href="https://makerworld.com/en/@OrangeSs/collections/945810" rel="nofollow noopener">https://makerworld.com/en/@OrangeSs/collections/945810</a>

Tooned VW Bug keychain

Car Stuff

JamesThePrinter

***Christmas and Halloween Cases are identical - Just add your new scenes*** Light up different Christmas scenes in this display. An LED tea light candle is required. &nbsp;The display features a door that opens to allow access to the tea light. Use a section of 1.75mm filament inside the hinge to connect the door to the case. Depending on your printer/setup, this hole may be on the tight side or a bit loose. If tight, drilling out the hole may help. If it is slightly oversized, I suggest melting the end of the filament piece with a soldering iron or lighter.&nbsp;I have included a separate liner. This allows you to print the case in a dark color, but line the inside with a lighter color to allow for more reflection of light outward, making everything brighter.&nbsp;For a complete display, you will need:<ul><li>1x Case</li><li>1x Door</li><li>1x Knob</li><li>1x Snap Ring</li><li>1x Liner - Optional</li><li>1x (minimum) Scene - You can easily remove the snap ring to swap out scenes as desired</li></ul>Check out the rest of my Christmas models <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/69417" rel="nofollow noopener">here</a>!&nbsp;<h4>Print Settings</h4>No special setting are needed for the display case, door, knob, snap ring and liner. &nbsp;Scenes Print SettingsPrint the scenes with 100% infill. The scenes also require color changes:<ul><li>The bottom 3 layers <ul><li>white or clear</li></ul></li><li>The top 2 layers <ul><li>should be black for most scenes</li><li>Blue works well for the snowflake</li><li>If you have an MMU/AMS, other colors can be added as well</li></ul></li></ul>&nbsp;<h4>Assembly</h4>Glue the knob into the door. Only a very small amount is needed.<figure class="image image_resized" style="width: 535.5px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000041177/design/c2ff42e5-4f47-41e8-8905-382ea68f6cfe.webp"></figure>Put the door in place and latch it. Use a 20mm piece of 1.75mm filament to connect the 3 sections of the hinge. If the filament goes in very easily, it may be a good idea to heat up the top end of the filament ‘pin’ and press it flat. This will prevent the pin from falling through later on.<figure class="image image_resized" style="width: 535.5px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000041177/design/230e3f93-7a69-4e0a-8026-060800c5ea3a.webp"></figure>Open the door. Insert a scene into the opening (image facing outward). Insert the snap ring behind the scene by gently squeezing and placing it into the groove (see red arrow below).<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000041177/design/164034e6-1484-4bc7-a435-e0a956565206.webp"></figure>If you are using a liner, slide it inside the case. This may be a tight fit. Go slowly and be sure to slide it in evenly on all sides.<figure class="image image_resized" style="width: 535.5px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000041177/design/96f9e1cf-982a-4e8f-be08-881a51506e3b.webp"></figure>Turn on your tea light and close the door.&nbsp;&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:Display Cases<ul><li>Bambu Lab Matte Charcoal PLA</li><li>Bambu Lab Matte Dark Green PLA</li><li>Bambu Lab Matte Dark Red PLA</li><li>Bambu Lab Silk Gold PLA</li></ul>Liners<ul><li>Bambu Lab Matte Ivory White PLA</li><li>Bambu Lab Basic Bambu Green PLA</li></ul>Scenes<ul><li>Bambu Lab Matte Ivory White PLA</li><li>GIANTARM Transparent Clear PLA</li><li>Bambu Lab Matte Charcoal PLA</li><li>Bambu Lab Matte Mandarin Orange PLA</li><li>Bambu Lab Matte Lemon Yellow PLA</li><li>Bambu Lab Matte Marine Blue PLA</li></ul>

Christmas Tea Light Display

Christmas 

Julia Ebert

This is a big toy human figure that's inspired by a Lego minifigure. I spent a lot of time making this model from scratch to match the original design while making tweaks for tolerances, printability, and strength. While there were a number of minifigure models I found online, most were not designed for printing, which is a particular challenge for the leg, arm, and hand joints. I'm particularly proud of the universal clip I designed for these, which makes for easy assembly and stiff-enough joints to pose your figure.I designed the clips and tolerances for this model to be printed at 100% (10x original Lego scale), but people have previously had success printing my <a href="https://www.printables.com/model/78695-mega-lego-like-skeleton-101-scale" rel="nofollow">10x Lego-like skeleton</a> at smaller scales (eg, 50% or 5x Lego-scale).Now that I have a base model for a Lego-like figure, this opens up a host of options for specific Lego-like figures. If there's something particular you're interested in, leave a comment or send me a message! If you want to make your own modifications, I've included STEP files for all parts (just be sure to give credit for my original design).Fully assembled, this model stands 40 cm (~16 inches) tall. I printed mine with Hatchbox true blue PLA, Hatchbox true red PLA, and Prusament mango yellow PETG.<h4>Printing Instructions</h4>I've included 3MF files for all parts, and parts should import correctly oriented for printing.<ul><li>For PrusaSlicer 2.6+: you just need to load the project file. (This makes use of organic supports, for the legs, which are added with PrusaSlicer 2.6.)</li><li>For other slicers: I've included details about special instructions for all parts, so you should be able to replicate anything necessary for proper printing. Except where otherwise noted, I printed parts in PLA at 0.15mm layer height with 7% cubic infill and without supports.</li></ul>You will need to print:<ul><li><code>32x-connector-pins.3mf</code>: You should need 30 pins for assembly (or 26 if you print the solid head); this has 2 extra just in case. If you have trouble with bed adhesion, add a brim</li></ul><h5>Legs</h5><ul><li><code>legs.3mf</code>: Uses tree supports the top of the lower hole on the leg.</li><li><code>hips.3mf</code></li><li><code>2x-limb-clips.3mf</code>: This file contains two clips. You'll need to print one set of two in the arm/body color, and one set in the leg color. Important: I recommend printing this in PETG or ABS with 25% infill, because it will have to flex and PLA might snap.</li></ul><h5>Body</h5><ul><li><code>arms.3mf</code>: These print with a small surface area on the bed (the wrists), so you might want to add a brim if you have trouble with bed adhesion.</li><li><code>body.3mf</code></li><li><code>2x-limb-clips.3mf</code>: This file contains two clips. You'll need to print one set of two in the arm/body color, and one set in the leg color. Important: I recommend printing this in PETG or ABS with 25% infill, because it will have to flex and PLA might snap.</li></ul><h5>Head & hands</h5><ul><li><code>2x-hands-wrists.3mf</code>: Requires supports on the underside of the wrist clip. Like the limb clips, I recommend printing with PETG (or similar) with 25% infill.</li><li>One of: (all require supports on the underside curve of the head)<ul><li><code>head-face-mmu.3mf</code>: Print the head & face as one part with some sort of multi-material printer (e.g., Prusa MMU or Bambu AMS). Use supports on the underside curve of the head.</li><li><code>split-head.3mf</code> and <code>face.3mf</code>: Print the head (with cutouts) in two pieces. Use pins and glue to connect the halves. Print the face separately and glue it in.</li><li><code>solid-head.3mf</code> and <code>face.3mf</code>: Print the head and face as separate prints. Use supports on the underside curve of the head. Then glue the face parts into the head.</li></ul></li></ul><h4>Assembly Instructions</h4>In addition to the printed parts, you will need cyanoacrylate glue (CA glue/superglue). <h5>Legs</h5><ol><li>Glue the pins into the top of the hip. Add glue to the holes and bottom surface of each of the hip pegs and attach. Important: The slope of each hip peg should be facing out to the sides. If the pins don't want to go together, check that you have this orientation right!</li><li>Use the same gluing approach to attach the limb clips to each side of the hips.</li><li>Gently but firmly press each leg onto the clips. It should snap into place. The hips are symmetric, so you can't put the legs on backwards. This requires a fair bit of force, but you shouldn't need a hammer. If it won't go on, slightly sand or file down the outer head of the limb clip (rather than the inside of the hole on the leg). Warning: The clips are not designed to come out once they're attached, so make sure you're ready.</li></ol><h5>Body</h5><ol><li>Glue the limb clips into each arm, like you did for the legs.</li><li>Glue the wrist onto the hand, with the pins. Because of the relative print orientations here, it's best to use a bit more glue here to make sure it stays on.</li><li>Press each wrist clip into the arm. (They're the same, so you can't put in the wrong hand.)</li><li>Press each arm clip into the body. The body is also symmetric, so you can't put the arms on backwards.</li></ol><h5>Head</h5>If you printed the separate head and face pieces, glue the face pieces into the head. You may need to file or sand some of the face pieces to fit, depending on how well the supports worked.<h4>License Note</h4>This model is marked as non-commercial because I don't want anyone (including myself) having Lego come after them with a lawyer. If you choose to sell prints of this model, you do so at your own risk!

Mega Lego-like Minifigure (10:1 scale)

Lego

Super_Laserkatz

Hi, ich habe hier einen weiteren Pflanztopf für dich. Diesmal habe ich versucht eine Erdbeere nachzuahmen :) Nicht meine beste Arbeit, aber man erkennt, dass es eine Erdbeere sein soll oder? Bei der Variante mit Wandhalterung sind Supports notwendig.&nbsp;Viel spaß beim drucken!

Wall Planter 1.18 Erdbeere Strawberry

Pots

Diamondback149

This fishing bobber keychain is designed to be printed in two parts for those without access to AMS, while still being able to print in multiple colors. I flattened the bottom for easer of printing as a round bottom made the threads fail. This keychain definitely floats in water, and may be used to secure your boat keys in the event that they go overboard.Thank you for the support.

Fishing Bobber Keychain

Key Chains

Stag 3D

<h2>Stag Filament Clip</h2>“Probably the best filament clip in the world…”&nbsp;Simply click the filament clip into place on either side of the spool and feed your filament into the hole for a nice secure fit. &nbsp;It may require you to push harder when first inserting the filament but that's perfectly normal and ensures a nice clean fit. I also recommend the use of a glue stick on your print plate to ensure the best quality print and adhesion. <h4>Featuring:</h4><ul><li>Designed for Bambu Labs Spools</li><li>No supports</li><li>No brims</li><li>Quick print</li></ul>