javierdiazraya

WhatIsHeBuildingInThere

This is a small shelf supported by a skull instead of a conventional bracket. The profile of the shelf is also lined with skull impressions. Very cool unique Goth aesthetic home decor. The shelf was also designed with a tapered pocket in the back so it can easily be hung flush on the wall with picture hanging nails. It was printed in Esun black PLA and Esun Bone White.1 color change and a fairly fast print. I've also printed on a rainbow PEY holographic build plate with neat results. Enjoy :)

Human Skull Shelf

decoración 

Jackmnb

MLOK handstop that uses 1x M4 mlok screw, found on Amazon. I recommend printing all my files with 100% infill.

Nagasaki Handstop (MLOK)

airsoft

Ukdavewood

Update 2/2/24Added Extra profile containing optional underwater parts and a stand - which can be bolted on the bottom with 3xM4 x 15mm Cap head screws.&nbsp;&nbsp;&nbsp;Update 13/2/24Updated the underwater print profile to move the section breaks so that they line  up with the main waterline model.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/530902/2024-02-13_4007ddc013b068.jpeg"></figure>Also doubled up  the tiny azipod motor parts - as it doesn't add much to print time and will then give some spares in case of breakages or printing issues.&nbsp;Also slightly improved the adaptive layer height settings.&nbsp;&nbsp;Update 4/1/24.I have added the underwater hull part of this ship to my 1:1000 scale version here<a target="_blank" href="https://makerworld.com/en/models/15006#profileId-14776" rel="nofollow noopener">https://makerworld.com/en/models/15006#profileId-14776</a>&nbsp;<figure class="image image_resized" style="width:29.97%;"><img src="https://makerworld.bblmw.com/makerworld/draft/530902/2024-01-04_4a0113e166b658.jpg"></figure>If there is any interest in a version scaled for this 1:500 version please let me know via the comments I will create one.&nbsp;&nbsp;&nbsp;Scaled at 1:500 and mutli coloured - this model is multi plate, quite large and requires a lot of time to print.It is recommened that people try one of the 1:1000 or 1:1250 version first - which print without supports on a single plate.&nbsp;Updated 31/12/23New version of the Dome on deck18 added as a 2nd + 3rd plate on the same print profile as was uploaded on 21/12&nbsp;Updated 21/12/23Alternative version of deck 8 included in seperate profile - to avoid issues with lighting channel showing through very thin deck layer.&nbsp;Updated 9/10/23:Corrected a problem with a duplicate part from deck 15 being present and one part from deck 14 being missing.See Plate 14.&nbsp;Updated 30/9/23:Corrected a problem with the port side of the hull section not slicing correctly.&nbsp;Also note that since releasing these complex multi part 1:500 ship models I have found that the BL printers are capable of printing these models quite well at a 1:1000 scale on a single plate. Seperate entries in Makerworld have been created for the 1:1000 versions.&nbsp;&nbsp;Update: 8/9/23:A new version of the model has just been updated that addresses points 2,3,4 & 5 below.&nbsp;&nbsp;Update: 18/8/23Following feedback from the 2 successful end user prints of this model I am planning to make the following updates:<ol><li>Enhance the build instructions - I have already made some updates to bring these instructions in line with the slightly more detailed ones on printables.</li><li>Thicken up some of the more fragile top decks - that are quite difficult to remove from anything other than a cooled down textured sheet</li><li>Change the settings in the build files to increase the use of brims - to avoid corner lift off</li><li>Include built in part numbering on the main deck parts.</li><li>Provide a version of the centre hull section with slightly wider tollerances - to make it easier to push parts together</li><li>Provide simpler smaller scale versions (1:1000) of this ship for single plate, single colour and multi colour printing.</li></ol>&nbsp;Third ship in a series of Seven 1:500 scale Models of P&O Cruise Ships - Iona - for personal use only.&nbsp;Iona is the largest P&O Cruise Ship currently in service.&nbsp;Designed for multi colour printing on a Bambu Lab X1C or P1P with 8 Colours (2 x AMS).&nbsp;STL files not available individually as there are too many.Designed using Fusion 360.Model is approximately 3 build plates long - so needs to be printed in separate sections which are slotted together at deck level, then each deck is bolted together using M4 Cap Head Screws.Printing will take well over 60 hrs in total - in separate plates which average about 2 hrs printing time each - but some of the more complicated plates take in excess of 13 hours to print.&nbsp;For reference here are the filament colours I have been using in order of quantity - with a best guess at Bambu Lab equivalentseSUN PLA+ Filament 1.75mm, PLA Plus 3D Printer Filament Cold White eSUN PLA+ Silver SunLU PLA+ Blue SunLU PLA Red 1kg 1.75mm PLA 3D printer filament Printer - With coil (Gold Color) SUNLU 3D Printer Filament PLA+ Plus Grass Green Aldi Balco Blue 1kg SunLU PLA Yellow Bambu Lab Orange ICE Filaments ICEFIL1PLA104 PLA filament, 1.75mm, 0.75 kg, Barbaric Brown eSUN PLA BLACK  With the quantity of white being about 10x the rest.My best guess at equivalent Bambu Lab Filaments to these would be:Bambu Lab PLA Basic Jade White Bambu Lab PLA Silk Silver Bambu Lab PLA Basic Blue Bambu Lab PLA Basic Red Bambu Lab PLA Basic Bronze Bambu Lab PLA Basic Green Bambu Lab PLA Matt Ice Blue Bambu Lab PLA Basic Yellow Bambu Lab PLA Basic Orange Bambu Lab PLA Basic Brown Bambu Lab PLA Basic Black&nbsp;Around 22 M4x16 and 4 M4 x 10  &nbsp;Build instructions. (updated 18/8/23)&nbsp;<ol><li>Print plates in the order presented. Writing deck numbers onto printed parts can help with organisation. **</li><li>Recommend textured plate is used for most prints - especially those with only 1 layer in some parts - such as deck 19 Bow. Cool plate however useful for very long thicker prints - such as Hull if being able to pause prints overnight is a requirement. **</li><li>For the thicker hull sections the dovetail joints are quite tight so a small amount of trimming of the dovetails may be required to get the pieces to slot together.</li><li>On the stern section of the hull I have included some slight overlaps to stop corners from being round that will need to be trimmed off. **</li><li>It is recommended that a small hammer is used to gently tap the dovetail joints together - going slowly from side to side - until the sections are flat.</li><li>Completed decks can then be bolted together using the holes with slots for screw tops.</li><li>Lifeboats need to be slotted into deck 7 tabs - it may be necessary to slightly widen the slots in the lifeboats with a screwdriver.</li><li>The canopy on deck 19 also slots into some fairly tight holes - so again these might need to be prized open slightly with a small screwdriver</li></ol><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/530902/2023-08-18_a2c7dd1a41697.jpeg"></figure>&nbsp;&nbsp;Model has only been printed once so far, and was re-sliced for this upload.Further details of the design and built process are available on the Bambu Labs forum AMS section.Details of this model will also be posted on<ol><li>The Bambu Lab Official Facebook Group</li><li>The P&O Facebook Group</li><li>The Ship Models Facebook Group</li></ol>&nbsp;This is a personal project. I have no connection to P&O Cruises or Carnival Corporation other than being a customer.This version is released under a CC Non Commercial No Derivatives license due the P&O Cruises branding.&nbsp;&nbsp;f360 ref: iona 5b Arvia V1 S500 v122. 30/9/23  &nbsp;&nbsp;&nbsp;

P&O Cruises Iona 1:500 Multi part

figuras

TotalChaos

Made this stackable solution for all bambu bits and pieces to keep my printer space neat and tidy. Each body slots into each other making it one streamline unit. I thought I would share it with everyone because there was nothing on offer that allows you to customise the storage to your needs. Slim Draw (Requires Slim Body)insert 1 offer a wide range of storage with dedicated slots for hotends, wipers + screws, nozzle socks ect Slim Draw (Requires Slim Body)insert 2 offers a split section for odds and ends including pliers & cuttersFat Draw (Requires Fat Body) insert 1 offers a wide range of storage with dedicated slots for hotends, full assembly hotends, glue stick & scrapers ect MEGA UPDATE FOR A1 MINI OWNERS! I have released an A1 mini version of the Tidy System, you can find it using the link below: https://makerworld.com/en/models/80083#profileId-85022 UPDATE: 26/11/23  New Added Draws  1. Fat & Slim - Empty draws2. Slim Draw quad sections UPDATE: 27/11/23 ALL NEW COLOUR SAMPLE FILAMENT TIDY DRAW! <a target="_blank" href="https://makerworld.com/en/models/75661#profileId-80194" rel="nofollow noopener">https://makerworld.com/en/models/75661#profileId-80194</a> UPDATE: 28/11/23 Build Plate Module! <a target="_blank" href="https://makerworld.com/en/models/76785#profileId-81260" rel="nofollow noopener">https://makerworld.com/en/models/71878#profileId-76020</a> UPDATE: 30/11/23 Tidy System Top Caddy  <a target="_blank" href="https://makerworld.com/en/models/78869#profileId-83174" rel="nofollow noopener">https://makerworld.com/en/models/78869#profileId-83174</a> UPDATE: 30/11/23 Top Plate Added to Profile & Raw Download UPDATE: 04/12/23 Only Hotend Slim Draw Added (NOT FULL ASSEMBLY HOTENDS) ADDED PRINT PROFILE AND RAW DOWNLOAD Only Complete Hotend Fat Draw Added (FULL ASSEMBLY HOTENDS) ADDED PRINT PROFILE AND RAW DOWNLOAD UPDATE: 05/12/23Slim A1 Mini Accessory Draw ADDED PRINT PROFILE AND RAW DOWNLOAD  UPDATE: 11/12/23 Slim Colour Swatch Draw<a target="_blank" href="https://makerworld.com/en/models/89524#profileId-95815" rel="nofollow noopener">https://makerworld.com/en/models/89524#profileId-95815</a> UPDATE: 14/12/23 Fat Max Body + Boxed Spares Draw<a target="_blank" href="https://makerworld.com/en/models/92978#profileId-99395" rel="nofollow noopener">https://makerworld.com/en/models/89524#profileId-95815</a> UPDATE: 21/12/23 - NEW NEW DRAWS ADDED! Fat Max Draw Split Style 1 & 2 <a target="_blank" href="https://makerworld.com/en/models/101894#profileId-108493" rel="nofollow noopener">https://makerworld.com/en/models/101894#profileId-108493</a> <a target="_blank" href="https://makerworld.com/en/models/101902#profileId-108499" rel="nofollow noopener">https://makerworld.com/en/models/101902#profileId-108499</a> UPDATE: 25/12/23 NEW SLIM BLANK DRAW INSERTS! <a target="_blank" href="https://makerworld.com/en/models/106310#profileId-113505" rel="nofollow noopener">DOWNLOAD HERE</a> UPDATE: 29/12/23  FAT DRAW ALTERNATIVE WITH FULLY ASSEMBLED HOTENDS  <a target="_blank" href="https://makerworld.com/en/models/112956#profileId-121316" rel="nofollow noopener">DOWNLOAD HERE</a> TIDY SYSTEM TOP CADDY ALTERNATIVE VERSION <a target="_blank" href="https://makerworld.com/en/models/112974#profileId-121339" rel="nofollow noopener">DOWNLOAD HERE</a> UPDATE: 20/01/24 - NEW TIDY SYSTEM CONNECT -CONNECT MUTIPLE SYSTEMS TOGETHER! <a target="_blank" href="https://makerworld.com/en/models/148632#profileId-162200" rel="nofollow noopener">DOWNLOAD HERE</a>  More draw insert options to come!

decoración

airsoft

figuras

cajas