jasonzao777

vidguide

Mooncake! I love final space and I hope you do too! This is a 4 color model of Mooncake compatible with AMS printing, and supports enabled.&nbsp;2024-03-28: Updated print profile to use variable layer height for much improved curvature at the top.&nbsp;Check my profile for other Final Space models!&nbsp;All my work is free for commercial use, or adapting and reuse as you see fit. If you like what I do, please feel free to leave a tip: <a target="_blank" href="https://www.buymeacoffee.com/misaunders" rel="nofollow noopener">https://www.buymeacoffee.com/misaunders</a>

Mooncake - Final Space Miniature Model

 Muppets 

rico3Dmaker

Mushroom Power Up Super Mario Bros.With this STL, you can print the mushroom in any color you like. For example: Red for super mushroom , green for 1-up, gold for coin mushroom and blue for mini mushroom.All parts are to be printed separately in the correct corresponding colors to eliminate the need to paint.&nbsp;Easy to assemble: The mushroom and head arrows should be pointing towards each other. The same must be done for the eyes.Glue the sparkles to the eyes and the eyes to the head piece (it is not necessary to glue the mushroom to the head)&nbsp;Attention The version of the head to serve as a container for objects is available in Rock, Proppeler and Spring versions. Check-out in my <a target="_blank" href="https://cults3d.com/en/users/Rico3DMaker/3d-models" rel="nofollow noopener">Cults Profile</a>.&nbsp;Scale If you want to print the mini mushroom use the maximum **70% scale of the files.** - in this case, for the eye sparkles, use a scrap piece of white filament to press into the black eye pieces with as a small amount of glue. Trim the excess filament off with your cutters. (last image in gallery).&nbsp;Infill Head - 20% Mushroom and eyes - 10%Resolution: 0.16mmSupports: Mushroom (optional - for best results)Scale: 100% to 70% - (It is important to ensure the fit of all parts)&nbsp;---Don't forget to tag us in your posts as <a target="_blank" href="https://instagram.com/rico3dmaker)%20(instagram" rel="nofollow noopener">@rico3dmaker</a> showing your best printing!

Mushroom Power Up - Super Mario Bros.

 Mario 

Kocyns

<h3>INTRODUCTION</h3>This car model was created based on the <a target="_blank" href="https://makerworld.com/en/models/218462#profileId-241229" rel="nofollow noopener">Golf 1</a> model and inquiries for additional models. I adopted the best know-how and found further improvements for easier assembly, strength, and better appearance.&nbsp;The model will now be regularly updated because the template has a lot of details that cannot be done in a short time.&nbsp;If you have any ideas for improvements or modifications, please let me know!&nbsp;<h3>BASIC INFO:</h3><ul><li>scale 1:40</li><li>Glue is not needed</li></ul><h3>ASSEMBLY: <a target="_blank" href="https://youtu.be/sd6-QBgvXbM" rel="nofollow noopener">video</a></h3><figure class="media"></figure><h3>UPDATE:</h3><ul><li>Added version R1.4</li></ul><figure class="image image_resized" style="width: 73.82%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000376939/design/2024-04-25_f1be529cdd6d6.png"></figure><h3>Planned improvement:</h3><ul><li>new rims ✅</li><li>details/additional parts of the model ✅</li><li>AMS</li></ul><h4>Commercial uses:</h4>If you want permission for commercial use: <a target="_blank" href="https://www.patreon.com/kocy/" rel="nofollow noopener">patreon.com/Kocy</a>&nbsp;

DeLorean DMC-12 (Back to the Future) - Kit card

 Vehicles

 Pokémon 

beamr39

Ed209

 Robocop 

Rott3D

We present you another action figurine this time dinoou.balljoints, parts, in association with artman, Enjoy

Dinosaurus T rex balljoint movable figurine

 Dinosaur 

mail.iou

Nichirin Samurai Sword miniThis is a telescopic sword inspired by the Nichirin sword in the Japanese manga "Demon Slayer: Kimetsu no Yaiba". This is a telescopic katana that is printed in parts and then assembled. You can choose to print different colors and strengths for different parts. The handle is capped to facilitate future maintenance and blade replacement. However, the disadvantage of this is that the printing time will increase. If you are sure that you can print an all-in-one print, you can refer to my previous telescopic knife work Reverse Blade Sword mini: <a target="_blank" href="https://makerworld.com/en/models/114630" rel="nofollow noopener">https://makerworld.com/en/models/114630</a>&nbsp;Notice It is recommended to use PLA+、PETG for printing. If your filament has insufficient strength, please increase the fill overlap to more than 40%.&nbsp;Assembly instructions: 1. Put the blades in order. 2. Close the handle cover.<img src="https://makerworld.bblmw.com/makerworld/draft/501755/2024-01-12_3dee38ac87bac.png"> 3. Push the fastener carefully.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/501755/2024-01-12_5fed3ee8af84b.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/501755/2024-01-12_9da5e647fb736.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/501755/2024-01-12_12ec4019f870e.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/501755/2024-01-12_947ac7f8b2c99.png"></figure></td></tr></tbody></table></figure>&nbsp;

Nichirin Samurai Sword

 Swords

Sakul

"Kirby Duo Delight" – a whimsical fusion of creativity and nostalgia! 🌈🎮 Dive into the enchanting world of Nintendo with these meticulously crafted 3D-printed Kirby figures. One's cozily seated, while the other stands tall, each bursting with vibrant, multi-colored charm.

"Kirby Duo Delight" Nintendo - Kirby Figures sitting and standing

 Nintendo 

zuperbuuworks

<h3>VERSION 2 OF SHENRON IS NOT ON MAKERWORLD. THE VERSION FOUND HERE NO LONGER RECEIVES UPDATES.</h3>--What&#39;s Changed in V2?-- Version 2 has been made from scratch, with improved link design, greater detail, and more accurate source material features.--What&#39;s New in V2?-- The arms and legs now have articulation via ball-and-socket joints, and come in two flavours; a 4 joint design or a single joint design, for simplicity. The jaw now opens and closes, and has inner-mouth detailing. There is an optional head with whiskers already meshed onto it, or you can use filament strips on the other head type, which has holes to insert the strips into.--Anything Else?-- Whilst version 1 of Shenron was, and will remain, free to download, the Version 2 model will be a paid-for model. Provided as STL files, with a full-colour 3MF painted in Bambu Studio included.The model will be for sale ONLY and found on the following pages: https://www.printables.com/@zuperbuu_1527797 https://cults3d.com/en/users/zuperbuu/3d-models https://www.patreon.com/thomastedwardsSHENRON V2 WILL NOT BE UPLOADED ANYWHERE ELSE: if you see it on MakerWorld, Thingiverse, or any other page that isn&#39;t one of the above 3 URLs, it will have been STOLEN and should be REPORTED.<h4>IMPORTANT: If you use a P1S/P1P and experience issues printing the top of the head, please configure the print profile speed to 80mm for the outer wall, and give the model 3 walls. (thank you user PavorMaker who helped figure this fix out.) If you use the Textured PEI plate, a brim is necessary regardless of what machine you use. A brim is not needed if you use the Cool Plate in an enclosed machine, that has a stable temperature.</h4>This Shenron model comes in two sizes; short, and long. The short dragon has 12 joints down its body, the long has a whopping 31 joints!The whiskers are just strips of filament that I have glued into the holes on the side of the muzzle, a filament size of 1.75mm fits in the holes nicely.I printed mine without a brim; providing your hotbed is clean/freshly glued, you shouldn&#39;t need a brim either. Supports are not needed for this model; do not use them or the model can break when you remove it from the supports!&nbsp;Be aware that the long version of the model gets VERY close to the plate edges, so you won&#39;t be able to make this model any larger. I wouldn&#39;t print it any smaller as the joints will likely lose strength.&nbsp;Pre-painted/coloured versions are also available!&nbsp;The joints can move in almost all directions, though the hips have the least movement. The arms and legs do not move.You can see the range of movement in this video:This file covers PERSONAL use. If you want to sell prints of this model, please subscribe to my Patreon: https://www.patreon.com/thomastedwards

Articulated Shenron Dragon Toy

KK3D__

<h2>Summary</h2>Inquisitor Saint Nicholas gathering evidence just in time for the holiday season

Saint Nicholas the Inquisitor

 Christmas 

Army of Won

In celebration of the year of the dragon, I give you the Green Power Ranger Mandalorian. The original Green Ranger was a dragon so it occurred to me that this was a perfect time to show him off. This flexi toy is based on my original design for my very first cosplay costume that my friend wore to San Diego Comicon 2023. It was hugely popular and the original files are still available for download if anyone is interested. Check it out as well as my other designs - <a target="_blank" href="https://cults3d.com/en/users/ArmyofWon/3d-models." rel="nofollow noopener">https://cults3d.com/en/users/ArmyofWon/3d-models.</a> Don't forget to subscribe to my Patreon (it's free!) to keep up with the latest news - <a target="_blank" href="https://www.patreon.com/ArmyofWonStudio" rel="nofollow noopener">https://www.patreon.com/ArmyofWonStudio</a>Enjoy and go forth and make something EXCELLENT!

Green Power Ranger Mando Flexi toy

 Power rangers

I'm very excited to release my Spiderverse themed toys for everyone to enjoy. This is a print in place flexi toy of the one and only Spiderman in his classic suit. This toy is designed to be printed with no supports. I've also included a multicolor .3mf file if you have access to a multicolor printer.&nbsp;This toy is offered free for personal use only, however, if you wish to sell printed versions please join our Patreon community to obtain a commercial license:&nbsp;<a target="_blank" href="https://www.patreon.com/armyofwonstudio/membership" rel="nofollow noopener">https://www.patreon.com/armyofwonstudio/membership</a>. If you enjoyed this free model please consider some of the other models in the collection including Spiderman 2099, Venom, Miles Morales and of course, the one and only Spider Gwen/Ghost Spider.&nbsp;<a target="_blank" href="https://cults3d.com/en/users/ArmyofWon/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/ArmyofWon/3d-models</a>&nbsp;Now go forth and make something EXCELLENT!

Classic Spiderman Flexi toy

 Spider-Man

Crafty Sven

Rescaled battle droid that prints in parts and fits together as it does in its original LEGO form. This .stl is 400% of the original size. Can be scaled to any size !This size is perfect as a single pen holder ✒🖋🖊🖌🖍I printed these parts one by one and I recommend that. Both the 3mf and gcodes already have a little attachment at the bottom of the hands and head to help the bed adhesion. The orientation is purposely standing to give the parts a nice finish all and all. This has to be printed with supports on (included in gcodes) and they are very easy to remove with pliers and leave a very nice finish. Happy printing 😊

Lego Battle Droid 400%

Lego

TripleGWorkshop

Shout out to PALADINQP for this ridiculously cool model.→ https://cults3d.com/en/users/Paladinqp/creations→ https://cults3d.com/en/3d-model/home/pupa-solar-opposites-free-free-3d-print-model

Pupa from Solar Opposites

 Solar opposites

spud2077

remixed from thingiverse iava808 (I do not know if this is the original creator, so only for personal use)I have pieced together the split body as it is a better sculpt than the one piece body

Aliens APC 28mm

alines

MrGnarly

Lots of working around sizing and coloring went into the profile added. Even with the changes i recommend sanding each ball joint slightly so they move freely if you use PLA. Removed the hat and will upload it here. I dislike it so will release a v2 soon.&nbsp;Only need to print the first two plates, the rest are there for reprint/editing.&nbsp;Assemble the joint and pieces like the following images.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/545261/2024-01-02_ff571355ef2a7.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/545261/2024-01-02_6b2b60e622b5.png"></figure>The tough part is definitely the centerpieces not being tight enough. I enlarged the pin to help with this but it's still not perfect and I ended up just screwing it. Before that, just a bit of glue also tightened it up. Will be working on a better solution. &nbsp;If anything breaks I included extra plates that should let you reprint whatever piece broke. Take care the most with the head, chest, and leg pieces as they take the longest to print. Don't forget the print part of the plate feature exists now :)&nbsp;Please let me know if something isn't working so I can change the main file.Thanks,Dave

Flexi Link from Zelda games 

 The legend of Zelda 

Wekster

if you like this kind of stuff consider supporting me on my Patreon patreon.com/wekster

Marshmallow dude

 Ghostbusters

 skeleton 

if you like this kind of stuff consider supporting me on my patreon patreon.com/wekster

Mini Harry Potter

 Harry Potter

Romwba3D

A Cute lamball from Palworld Fan Art split for multi-colour printing with just one AMS&nbsp;I used Bambu Lab Filment&nbsp;i have also included a single colour STL file single colour or resin printing&nbsp;I have uploaded a 3mf Print profiles for 4 colour for both the X1C/P1S/A1 and also for the A1 Mini&nbsp;These are part of My Patreon <a target="_blank" href="https://www.patreon.com/romwba3d" rel="nofollow noopener">https://www.patreon.com/romwba3d</a>&nbsp;Please note the Multi Colour RAW STL Files are designed to be printed all at once by importing into your slicer as a Muli STL and not printed seperatly and glued togeather. If you print them that way they may not fit correctly&nbsp;You can view all the Available Models - now over 275 on https://www.romwba3d.com

Lamball Palworld

palworld

Polymaker

3 spooky figures created for the Polymaker Halloween Bundle 2023. &nbsp;The Polymaker Halloween Bundle is a Limited Edition filament pack containing 3 unique colours perfectly suited for Halloween decor. &nbsp;PolyTerra™ Marble Gradient PLA Pumpkin Patch Orange PolyTerra™ Marble Gradient PLA Gastly Purple PolyLite™ Glow/Luminous Gradient PLA Slime Glow Green&nbsp;Get Your Halloween Bundle:<a target="_blank" href="https://us.polymaker.com/products/seasonal-packs?variant=41558608216121" rel="nofollow noopener">https://us.polymaker.com/products/seasonal-packs?variant=41558608216121</a>&nbsp;Models Designed by: <a target="_blank" href="https://www.bendansie.com/" rel="nofollow noopener">Ben Dansie</a>&nbsp;The models can be printed without support.

Polymaker Halloween Bundle Figures 2023

 Monster 

Maker Dave

This is an update to my old Tron Recognizer model on thingiverse - <a target="_blank" href="https://www.thingiverse.com/thing:529061" rel="nofollow noopener">Tron Recongizer Dual Extruder Print by dehart007 - Thingiverse</a>&nbsp;Now that I have a P1S with AMS I did an update to it. I will be updating all my models as appropriate.. Stay tuned for more Tron!!

Tron Recognizer

tron

TS.Makers

It&#39;s ya boy the Slimelord Gumoss from PalWorld. I love this guy. Make your own guy. Probably no more Pals in the pipeline though relaxaurus is tempting.

Gumoss from PalWorld 

 Video games

 Sonic the hedgehog

Smarty

Oni Mask

 Ghost of Tashima

CanadianBacon21

This is an awesome MIB Noisy Cricket replica. It prints in 2 halves and can be multicolor with my print profile, or one color with the raw file. Perfect for any MIB cosplay!

Men In Black Noisy Cricket

 Men in black

No supports needed. Make sure that the bed is clean and the first layer adheres properly, glue is recommended.&nbsp;Good luck and happy printing ! ^-^&nbsp;I suggest trying the non AMS version 1st to see if you like the design and size. &nbsp;You can scale this up to 150% !

Ancient Guardian Articulated from Zelda 

 Zelda 

Ryzwick

Originally remixed on printables, seems the original was removed. This is the remixed version with color applied for MMU/Bambulab with AMS support. Color applied in Bambu StudioColors applied are Grey/White/Black/Green.11 hours for one, 14 hours for two three perimeters 25% lightning infill halved the prime volume size lower the flushing volume down to 180

Totoro Multi Color / AMS

 Anime

A meticulously crafted, full-size 3D-printed EVE figure designed for enthusiasts. This detailed model is assembled from multiple parts, providing a hands-on and immersive experience. Capture the futuristic charm of WALL-E as you piece together EVE's elegant form. Once complete, it stands as a stunning tribute to the beloved character, perfect for any fan or collector. Elevate your space with the precision and craftsmanship of this unique 3D-printed masterpiece. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/334724/2023-12-31_ba76b28b85ffc.gif"></figure> Print all the parts and assemble with ca glue. For printing, I would recommend to use the cool plate for this project, otherwise the printplate will be too hot and the print quality will suffer.

EVE Figure Wall-e

 Disney 

Martin Kozak

<h3>Print instructions for frame</h3>To achieve wider range of movement, I had to modify 4 pieces of frame parts. Don't forget to print them. Rest of the frame parts are the same as the original DUMMY 13. It is recommended to print frame from PETG.<h3>Print instructions for armor</h3><ul><li>0.2 mm, 3 perimeters</li><li>Parts are pre-oriented to the printbed.</li><li>Some armor parts require supports. Namely: armor_helmet.stl, armor_hip_left.stl, armor_hip_right.stl, armor_chest.stl, armor_knee_left.stl, armor_knee_right.stl, armor_visor.stl</li><li>For your convenience, use provided 3mf files with all the necessary parts and settings for Bambu</li></ul><h3>Assembly</h3>For assembly, please follow <a target="_blank" href="https://photos.app.goo.gl/4J47inFht7c7vTq69" rel="nofollow noopener">BUILD GUIDE</a>. Some steps are slightly different from the original. Note: kneepads might use a drop of glue to hold better in place.

Medieval full plate armor for DUMMY 13

 Medieval

agepbiz

<figure class="media"><div data-oembed-url="https://youtu.be/SNWnS3XnjX8"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/SNWnS3XnjX8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;I have been experimenting with a breakaway wingtip to improve on the silhouette of my design to match the real F14 better, while still being print-in-place and articulated. The wingtip breaks of with a satisfying snap and leaves a nice clean edge. I have also adjusted the wing shape and the angle of the tail fins. I have also included a version with a brim<h3>Commercial license</h3>Do you want to sell prints of this model? You can purchase commercial licensing for this model by <a target="_blank" href="https://www.printables.com/@agepbiz#join:144" rel="nofollow noopener">joining the Commercial license tier in my club</a> added a larger version (300). If you want to print the stands for it you have to upscale the stands to 150%Subscribe or follow me on:Subscribe or follow me on:Instagram: <a target="_blank" href="https://www.instagram.com/agepbiz/" rel="nofollow noopener">www.instagram.com/agepbiz</a>YouTube: <a target="_blank" href="https://www.youtube.com/user/agepbiz" rel="nofollow noopener">www.youtube.com/user/agepbiz</a>Twitter: <a target="_blank" href="https://twitter.com/agepbiz" rel="nofollow noopener">www.twitter.com/agepbiz</a>Printsettings:No support No raft 0,15mm-0,2mm layer height 35-45mm/s

Print-in-place and articulated F14 Jet Fighter with Improved Wingdesign

 Jets

mocodroid

Transformable Truck Robot. Ptint in place. Based on a Transformable movie character. Printed on PLA, .2mm layer height, .4 mm nozzle, 10% rectilinear infill, 4 top and 3 bottom layers. Use a brim if you have layer adhesion issues. No support needed. Move the joins side to side gently to free them.

Transformable Truck Robot Print In Place

 Transformers

ddf3d.com

<div><h1>Summary</h1><div>Hi This is Gorilla Ares <hr>Last enemy of mankind Is higher evolutionary ancestors after Have strong arms And the ability to quickly jump Gabriel's wing bring the powerful magic The hands of sharp ax is the most gorgeous arms Only he can win <hr>When you going to print this, layer high 0.15~0.25mm should be fine raft is better to use and best to use over 70% infill. Hope you will like it ;) Model created and uploaded using the Modio app for iPad, available for free in the App store. Designed to print well without rafts or support material. Check out Modio's website: <a href="http://modio3d.com" rel="nofollow">http://modio3d.com</a>.</div></div>

Gorilla Ares

 Figures

davidkelly021

hi everyone this is my print in place pukmarin based on the cutest alien to ever be seen on a film (flight of the navigator) if you haven't seen it you need to watch the film guys its a classic

pukmarin flight of the navigator 

 Fight of the navigator

Catharsis69

3D-DRUCKEINSTELLUNGENUnterstützung benötigt, infil 10%, keine Krempe, keine Flöße.Einfach ausdrucken und aufkleben.Viel Spaß damit!!!

Halloween Homer

 Simpsons

fallout

 Marvel

3DP RNS

[3DP RNS] Worker V1.2 (3D Printed Robot)<ul><li>Strengthening the torso and knee joints.</li><li>Refinement of the sharp edges of the elbows</li></ul>ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ[3DP RNS] Worker V1.1 (3D Printed Robot)<ul><li>Modify torso joints</li></ul>ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ[3DP RNS] Worker V1.0 (3D Printed Robot)<ul><li>Series : 2 Legs / Humanoid Type [<a target="_blank" href="https://youtube.com/shorts/tvGhQDAssUE?feature=share" rel="nofollow noopener">Youtube Video</a>]</li><li>This Is an all at once print. Assembly not required :)</li><li>If you subscribe to the YouTube channel [<a target="_blank" href="https://bit.ly/2KC3Tdx" rel="nofollow noopener">3DP RNS</a>], ★ a new robot will be revealed.</li><li>Thank you for your subscribing! It means a lot to me :)</li><li>Commercial License [<a target="_blank" href="https://www.patreon.com/3DPRNS" rel="nofollow noopener">Patreon</a>]</li></ul>&nbsp;※ Notice For my uploaded robot model to enable all joints to move, it&#39;s advisable to use a Brim.  If removing Brim is inconvenient or challenging, I don&#39;t recommend printing it.  Also, joint functionality may vary depending on the printer and filament you use. I hope your print is successful and you can have a robot with well-functioning joints.<figure class="media"><oembed url="https://www.youtube.com/shorts/tvGhQDAssUE"></oembed></figure>ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ[3DP RNS] Worker V2.0 (3D Printed Robot)<ul><li><a target="_blank" href="https://www.patreon.com/posts/3dp-rns-worker-0-100476630?utm_medium=clipboard_copy&amp;utm_source=copyLink&amp;utm_campaign=postshare_creator&amp;utm_content=join_link" rel="nofollow noopener">[3DP RNS] Worker V2.0 Download [Patreon]</a></li><li>Worker V2.0 can be obtained through Patreon (Hero) membership.</li><li>There have been some changes to the joints and additional design details have been added.</li></ul><figure class="media"><oembed url="https://www.youtube.com/shorts/rWWGnp2Mcy4"></oembed></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000117513/design/2024-03-17_3ca93d4eaa5cb.png"></figure>ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ[3DP RNS] Astro V1.0 (3D Printed Robot)<ul><li><a target="_blank" href="https://www.patreon.com/posts/3dp-rns-astro-v1-102720556?utm_medium=clipboard_copy&amp;utm_source=copyLink&amp;utm_campaign=postshare_creator&amp;utm_content=join_link" rel="nofollow noopener">[3DP RNS] Astro V1.0 Download [Patreon]</a></li><li>Astro V1.0 can be obtained through Patreon (Hero) membership.</li><li>If the existing humanoid robot, Worker, had a design of straight lines, this robot has been designed with curves.</li></ul><figure class="media"><oembed url="https://www.youtube.com/shorts/ThhzUq1ta_Q"></oembed></figure>

[3DP RNS] Worker_V1.2

robot

Willi 3D

Create a pit droid …. or more! (They work better in groups.)&nbsp;If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=WGL5LXN5EHEXN" rel="nofollow noopener">If you want to support my work bye me a coffee.</a> Thanks!&nbsp;Description:This is a KIT CARD of a pit droid. Scale 1:10&nbsp;Update:(24/08/23) <ul><li>optimized printability of the pelvis</li></ul>(18/08/23) <ul><li>optimized upper leg to pelvis fit</li></ul>Printing:Layer height: 0.1Supports: NoBrim: NoMaterial: PETG, (ABS), (PLA)&nbsp;Assembly: The connections are designed and optimized for PETG, the use of PLA or ABS makes assembly more difficult and the parts can break. Follow the instructions in the picture.

Kit Card Pit Droid Star Wars

Star Wars 

wuguigui

<h2>Summary</h2>Updated 20230615 Someone said the "1.1 Part-Shell-Front" is too tight to insert into the body, so I modified it, you can try the new part now.Updated 20230605I separated the body into 2 parts, now it is available for small printers( print size less than 10X10X10cm)Also, I removed the nostril, because, in the early TV cartoon series, they don't have any nostrils on the face; The front shell and the front body parts have a snap groove now， which can help you to assemble them easily.But I kept the old version, you can download the new version parts with the title "1.1"Updated 20230530Sorry guys, someone has an issue when assembling the part"Part-Shell-Front" to the body, Then I found the part is wrong, and now I reupload the part"Part-Shell-Front", Please download it again.Teenage Mutant Ninja Turtles, the memorial of the Post-80s generation.I designed a model kit version of the four cute turtles, It imitated the frame structure of the model kits, can prevent edge warping during printing, and can also recall the fun of assembling the model kit. Most of the sprues adopt hidden designs.You can try to print it with no support, 0.1 mm layer height is recommended.Follow the "Assembly Instructions" to make it. Watch the video to get more information.You can get the fun from the assembling.Click "Like" if you like it, or <a target="_blank" href="https://paypal.me/wuguigui?country.x=C2&locale.x=zh_XC" rel="nofollow noopener">buy me a cup of coffee</a> thank you!<h2>Post-Printing</h2><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=KjEl-mLZMsw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/KjEl-mLZMsw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Teenage Mutant Ninja Turtles 

TMNT

Zurlingo-3D

<h2> </h2><h2>VERSION 2.0 IS OUT NOW! - PLEASE DOWNLOAD THIS ONE TO AVOID ISSUES WITH TEETH:</h2><h2><a target="_blank" href="https://makerworld.com/en/models/115266#profileId-123953" rel="nofollow noopener">https://makerworld.com/en/models/115266#profileId-123953</a> </h2> Articulated Shark Fidget Toy (Old Version)&nbsp;<figure class="image image_resized" style="width:39.84%;"><img src="https://makerworld.bblmw.com/makerworld/draft/379945/2023-12-19_eae8e7acce0a1.gif"></figure>&nbsp;Features:<ul><li>Fully articulated body</li><li>Opening mouth with sharp teeth</li><li>Strong design</li><li>Pre painted print profile included</li></ul>&nbsp;<figure class="image image_resized" style="width:46.21%;"><img src="https://makerworld.bblmw.com/makerworld/draft/379945/2023-12-19_5fa61cea41b5b.gif"></figure>&nbsp;This shark prints super easily with no support required.&nbsp;A great piece to show off what a 3D printer can do!&nbsp;Extra Info:The mouth is designed to print shut with the top set of teeth acting as support for the upper jaw and head. You must make sure your printer is dialled in and calibrated properly as the teeth require very precise extrusion and have the potential to be melted shut.&nbsp;My tests so far have been great on an Ender 3 S1 Pro, so I'm sure you will have no issues using Bambu hardware ;)&nbsp;Post Print:In order for the mouth to open, you simply need to snip the very tips of the upper teeth with a pair of side cutters (or similar). The lower jaw should then drop with little to no resistance.&nbsp;You must cut the teeth manually. Please don't try and force the mouth open as you will most likely break of multiple teeth in the process.&nbsp;The mouth can stay closed if you want, so skip this step if that's your preference.&nbsp;Thanks for looking!&nbsp;-Please rate the print profiles and share pictures of your makes :) - I'd love to see them!&nbsp;This is the old version - Please print version 2.0 below:(Click the picture)<a target="_blank" href="https://makerworld.com/en/models/115266#profileId-123953" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/379945/2023-12-30_7c276ef3f9cfb.png"></a>&nbsp;Follow me to stay updated with my latest models!