jason.lin

RP47 Designs

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm200mm x 200mm.&nbsp;You can complete this print without an AMS. Use the profile that says NO AMS and it will pause at the correct height instead of doing a filament change. At that point you change your filament and let it continue until the next pause where it will wait for the next manual filament swap. This being a three color Hueforge, it will require two pauses with manual filament changes.&nbsp;&nbsp;Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu White Transmission Distance: 5&nbsp;Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Grey At layer #9 (0.8mm) swap to White for the rest.

Medieval Town Art Hueforge NO AMS Needed

浮雕

marcopiazzo95

The written number, expressed in millimeters, represents the distance between the outer wall and the inner wall. The difference in diameter is twofoldOnly 3 grams.&nbsp;The 0.05 gap should only be free to spin if you print with a 0.2mm nozzle. With the 0.4mm nozzle the slicer does not consider the 0.05mm gap and fuses the 2 parts together, it is not a printer error.&nbsp;&nbsp;Il numero scritto, espresso in millimetri, rappresenta la distanza tra la parete esterna e quella interna. La differenza sul diametro è doppia.Solo 3 grammi&nbsp;Lo spazio 0.05 dovrebbe essere libero di girare solo se stampi con un ugello da 0.2mm. Con l'ugello da 0.4mm lo slicer non considera lo spazio di 0.05mm e fonde assieme le 2 parti, non è un errore della stampante.

Tollerance Test 3 grams

測試

tengdesign

客製自己的車牌號碼 可以加上吊環掛在自己的車鑰匙上 不僅為您的鑰匙增添風采 更方便您在繳停車費時迅速記得車牌號碼 Customize your own license plate number and add a stylish keychain to hang on your car keys. Not only does it add flair to your keys, but it also provides the convenience of quickly remembering your license plate number when paying for parking. Personalized, practical, and making your driving experience more vibrant 0.4噴頭 0.2層高

浮雕

測試

創意