jarmo1976

il_mondo_delle_spine

<h3>Description</h3>This drone fishing stand was designed specifically for the DJI Phantom 3, a must-have accessory for fishing enthusiasts who want to take their experience to the next level. This innovative stand allows you to use your DJI Phantom 3 drone to transport and release the bait in hard-to-reach places, increasing your chances of success.<h3>Key Features:</h3><ul><li>Perfect Compatibility: Tailor-built for the DJI Phantom 3, this stand integrates seamlessly with the drone without compromising stability and flight performance.</li><li>Ease of Installation: Intuitive design allows for quick and effortless assembly, allowing you to prepare for fishing in minutes.</li><li>Precise Release System: Equipped with a socket on the end, allowing the bait to be unhooked with precision, making an acceleration stroke, so that the line slides out of the socket</li><li>Load Capacity: Supports loads up to 300 grams, enough to carry a wide range of leads and baits, including live or artificial weights.</li><li>Lightness: The support is lightweight and does not significantly affect the drone&#39;s flight range, allowing you to explore vast stretches of water in search of the best fish.</li><li>Versatility of Use: Ideal for fishing at sea, lake or river, allowing you to reach areas that are difficult to access and to throw the bait at much greater distances than traditional methods.</li></ul><h3>Advantages:</h3><ul><li>Greater Accuracy: Accurately reach strategic fishing areas, increasing your chances of catching, and throw the bait directly to the desired point without no physical effort.</li><li>Innovative Experience: Experience a new way of fishing, combining advanced technology and passion for fishing.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000469856/design/2024-05-19_3a085ef16c5938.jpeg"></li></ul>

Manual release for DJI Phantom3 drone fishing

Drone

LorenzCR

Air vents for the hood of automobiles, use 3M duct tape.

Bonnet air intakes

automotive

StatusSymbol

&nbsp;&nbsp;<a target="_blank" href="https://www.patreon.com/statussymbol/membership" rel="nofollow noopener">EXTENDED VERSION AVAILABLE ON MY PATREON:</a>&nbsp;<a target="_blank" href="https://www.patreon.com/statussymbol/membership" rel="nofollow noopener"><img class="image_resized" style="width: 47.31%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449341/design/2024-06-10_56790e292c53d.jpg"></a>I&#39;m sharing with you my latest project. It&#39;s a fully 3D-printable mechanical grabber. The dimensions are compact; when closed, it measures about the span of a hand. It prints in approximately 3 hours using Bambulab printers. I printed it on an A1mini using matte Sunlu PLA. ------------------------------------<a target="_blank" href="https://www.patreon.com/posts/assembly-video-103020734?utm_medium=clipboard_copy&amp;utm_source=copyLink&amp;utm_campaign=postshare_creator&amp;utm_content=join_link" rel="nofollow noopener">Assembly video guide</a> ------------------------------------ I&#39;ve made some improvements to my &#39;Predator Grabber&#39; project:<ul><li>Better bracket grip</li><li>Added a return spring to make the movement smoother <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449341/design/2024-04-30_88213471e783.webp"></li><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449341/design/2024-06-10_3aa6bd198487a.gif">  </li></ul>

Predator Grabber v1 - Fully 3D printable 

Wheelchair helpers

Siganberg

I really like the Festool Systainer and I have a few of them. The only thing not to like is that they are very expensive. &nbsp;This is a similar design to Festool Systainer Mini but more printable with minimal support requirements. &nbsp;Features:<ul><li>Stackable</li><li>250x171x71mm dimension. Will fit with Bambu printers except A1.</li><li>No glue or screws needed. Every part should snap together. </li><li>No carrying handle to maximize space inside. </li><li>Slot for sliding labels. </li><li>You can create your own foam insert or custom 3D print organizer/divider inside. </li></ul>&nbsp;Printing instruction:&nbsp;<ul><li>The body and lid require support. For the body, add support where the feet will be attached and also for the latch lock. For the lid, just add support for the feet alignment area. 0.28mm resolution is suggested</li><li>All other parts can be printed without support, the ideal resolution is 0.20mm. </li></ul>&nbsp;<h4>Support the designer:</h4>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://paypal.me/FMarasigan" rel="nofollow noopener">paypal</a> or <a target="_blank" href="https://www.buymeacoffee.com/siganberg" rel="nofollow noopener">buymecoffee</a>

Simple Printable Mini Systainer (Beta)

Travel

Sevro

Overview.A Ring Lamp that can be changed to different situations. I designed base with various panels which can adapt to various style and occasion. You can simply change color of it as well as pattern on it, by changing color of diffuser and changing different panels.WARNINGSLed strips can emits some heat depends on what type of led you and voltage you use. In my case temperature of Main Ring achieve 60 °C . Due to this I recommend use filament that can resist that temperature especially for Main Ring. I tested ASA and it works well. Other high temperature filaments should work too (ABS, PETG but I didn&#39;t test it) PLA in this case can bend over time especially if you use heavy panel like budha.So in summary I tested and recommend :Main Ring - ASABase, Diffuser - PLAPanels- ASA ( PLA is possible but can bend )If you want change panel, always wait to cool down the ring lamp, otherwise PLA cover can bend during take off.&nbsp;Two Versions.There are two versions of Ring LampV1  - version 1 - First version of Ring Lamp. It is designed for 8 mm LED stripe.V2  - version 2 - Second version of Ring Lamp. It is larger and stronger. It is designed for both 8mm and 12 mm LED stripes. In V2 version the diffuser has a larger flange and fits better into the main ring. I enlarged each piece by 110% so it now better takes advantage of bed size of the Bambu Lab printers.In the meantime, some designers created their own fronts. If you want to use fronts from other designers, make sure they are the right size. If they are too small, simply enlarge them to 110% in the X and Y axis as in the image below.&nbsp;<figure class="image image_resized" style="width: 38.09%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/2024-03-28_867e2b9fbfc93.png" width="519" height="278"></figure>&nbsp;Electric parts you need.The easiest way is to buy electrical parts designed specifically for a ring light. Provides easy installation without the need for soldering.It is available on Amazon <a target="_blank" href="https://amzn.to/3zAnd6c" rel="nofollow noopener">https://amzn.to/3zAnd6c</a>It works with V1 and V2. <figure class="image image_resized" style="width: 37.08%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/2024-06-30_880ecf419c351.jpg" width="1500" height="1500"></figure>You can also buy only the LED Strip from Bambu Lab Store<a target="_blank" href="https://store.bambulab.com/collections/led-strip-light/products/white-cct-tunable-cob-led-strip-light?skr=yes" rel="nofollow noopener">https://store.bambulab.com/collections/led-strip-light/products/white-cct-tunable-cob-led-strip-light?skr=yes</a>It works only with larger V2&nbsp;<figure class="image image_resized" style="width: 30.92%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/2024-06-30_4c071b0333c11.jpg" width="700" height="700"></figure>&nbsp;&nbsp;By purchasing the above products, you support my work&nbsp;&nbsp;Of course, you can also search for each part separately and solder it yourself. You will need<ul><li>led stripe - best are LED COB </li><li>charger for LED strip</li><li>dc connector - I used 2.1/5,5 mm , the diameter of the mounting hole is 11.5 mm</li></ul><figure class="image image_resized" style="width: 21.19%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/8867176f-a9e4-4554-8087-7b1fd3a6b430.webp" width="800" height="565"></figure><ul><li>OFF-ON SWITCH</li></ul><figure class="image image_resized" style="width: 18.17%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/5cf1687e-913a-4186-92f2-75d8d2bac909.png" width="330" height="403"></figure>&nbsp;Printed PartsMain Ring, Base and Panels can be printed in draft mode 0.28-0.30 mm layer height with no issue.Diffuser should be printed with 0.2 mm layer height.<ol><li>After print, glue led strip to inner side of Main Ring</li></ol><figure class="image image_resized" style="width: 539.361px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/55f0a8a9-5b68-4a7a-b60e-def1c0cf337a.webp"></figure>Start from hole on bottom side<figure class="image image_resized image-style-align-center" style="width: 537.429px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/8f453fdd-01d6-476e-baaa-f03826eac490.webp"></figure>2. Put Main Ring into base. It should fit tight without glue.<figure class="image image_resized image-style-align-center" style="width: 538.864px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/f03a229b-e68e-4835-9d5f-37f66a2677d0.webp"></figure>3. Insert the electric part into the base and connect them by soldering<figure class="image image_resized" style="width: 535.014px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/2e73757c-be70-46f0-8fbb-ebc700b2e62a.webp"></figure><figure class="image image_resized" style="width: 531.08px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/75ca1515-ddbf-47b2-ab0d-34d6c3b795b9.webp"></figure>4. Insert Diffuser to Main Ring”. The Main Ring has a groove into which the Diffuser should be inserted and sit steadily. The flat side to the back.<figure class="image image_resized" style="width: 529.148px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/dd5e9b3f-84e4-47dc-8964-6b93b4f6ee46.webp"></figure><figure class="image image_resized" style="width: 527.23px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/3fc14977-a473-4279-b0d1-25f667c08fba.webp"></figure>5. Insert Panel into Main ring. The Panel has cuts at the bottom to avoid cutting the cables<figure class="image image_resized" style="width: 531.08px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/f414f9b5-fc71-4e83-af57-faf01b92199e.webp"></figure><figure class="image image_resized" style="width: 529.148px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/d3004065-f61c-4175-b595-6235c7b8ead8.webp"></figure>&nbsp;If you any question or suggestion write to me&nbsp;Have fun

Ring Lamp with replaceable panels

Interior design

Luca2210

Update : A new version is now available with a 9th cube with an ironed finish.&nbsp;All top surface patterns on Bambu Studio slicer.(I suggest to print it with black and grey to have a better look because white reflects too much light)&nbsp;Choose the one you like the most for your next prints!&nbsp;Leave a like and a comment if you enjoyed the model&nbsp;&nbsp;

Top Surface Patterns Display Test

Designing 

TVL 3D

Englisch: &nbsp;A raised laptop stand with a honeycomb design. Additional I designed a fitting tray to hold the clutter of your desktop and a cable clamp that can bei fittet into the honeycombs where you need it.&nbsp;The clamp is in 2 parts so it can be printed without supports. You can also use the base peg and clip on own designs of whatever you want. I plan to add some other parts later.&nbsp;Everthing is cut to fit into a 256 mm Bambulab chamber. I added a 3mf file where 3 plates are prepared the way it worked for me. Most of the parts I printed in Bambu Matte PLA&nbsp;Feel free to comment how it can be improved. I still learn all these things.&nbsp;Deutsch:&nbsp;Ein erhöhter Laptopständer mit einem Wabendesign. Zusätzlich habe ich eine passende Schublade entworfen, um all euren Schreibtischkram aufzunehmen sowie eine Kabelklemme, die in die Waben eingesteckt werden kann.&nbsp;Die Klemme ist 2-teilig, so dass sie auch ohne Stützen gedruckt werden kann. Man kann auch die Basisklammer verwenden und eigene Designs anbringen. Ich plane, später noch einige andere Teile hinzuzufügen.&nbsp;Alles ist so zugeschnitten, dass es in eine 256 mm Bambulab-Kammer passt. Ich habe eine 3mf-Datei hinzugefügt, in der 3 Platten so vorbereitet sind, wie es für mich funktioniert hat. Die meisten der Teile habe ich in Bambu Matte PLA gedruckt.&nbsp;Schreibt gerne Verbesserungsvorschläge in die Kommentare. Ich lerne das ganze Zeug immer noch.&nbsp;

Laptop Stand with Tray and Cable Holder

Office

KYZ Design

I really liked the original concept but wanted shorter brackets that fit 6 gauge screws well so I modeled one from scratch.Also made a 3-panel corner bracket (otherwise you'd need 3 of the 2-panel brackets to achieve the same thing).Print in the orientation it loads (rotate the overhangs towards your parts cooling fan if necessary), no supports.Update: small rounds at weak points added. Bambu Slicer likes to put seams at the weak point, even with a radius (Super Slicer does not), consider manually painting seams in your slicer if your slicer is putting seams on the stress concentration. The yellow brackets in my pictures are of the earlier version - you can see that the seams are at the worst place.

Corner Brackets - Designed for 3D Printing

3D printernparts

technerd

I made some sturdy VFLATs for my photo studio from thick Styrofoam boards and 3d printed parts without using any tape – LOL. They came out great! The folding screen hinges are for 30mm thick Styrofoam boards. Thinner Styrofoam boards with 2 meters in length would be too wobbly. And yes the d=4mm x 40mm long wood screws hold pretty well in “quality” foam boards. I did a test prior to starting this project and was surprised how well they hold. I also use 5 screws on each side of the hinge in case I'm a little rough with the VFLATs. White styrofoam boards 2000x1000x30mm Black matte, acrylic water based paint Paint roller Woodscrews d=4mm x 40mm 3D printed folding screen hinges 3D printed corner protectors Pieces of 1.75mm filament as shaft All infos and many more pics on my blog: <a target="_blank" href="https://www.schweinert.com/diy-studio-vflats/" rel="nofollow noopener">https://www.schweinert.com/diy-studio-vflats/</a> UPDATE: 2022-02-28 I just added a version for 1 inch (25,4mm) thick Styrofoam boards for our American friends ;-) Happy printing!&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=2gMWBy6ntPI"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/2gMWBy6ntPI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure> <img src="https://media.prusaprinters.org/media/prints/141147/rich_content/3ec3f92a-a6fc-43fb-9c39-68782827c0eb/studio_vflats_028.jpg#%7B%22uuid%22%3A%220997231e-63d1-4e2d-999f-021faa6adcb4%22%2C%22w%22%3A1280%2C%22h%22%3A720%7D">

Studio VFLAT folding screen hinge

streaming

Evo 3D

Can't reach your back and scratch? Now you can :)

MASSAGE Happy Back

just For kicks

maxaruta

This photobox features a 360-degree rotating base, which allows you to take photos from any angle. It is also fully customizable, thanks to the variety of wall styles available. With my photobox, you can significantly improve the perceived quality of your products to your customers. Your photos will be more professional and engaging, and your customers will be more likely to purchase them. Download the model today and start taking professional photos of your creations! _____________________________ Ti presento la mia nuova photobox, lo strumento perfetto per creare fotografie professionali delle tue stampe e creazioni.&nbsp;Questa photobox è dotata di una base d'appoggio ruotabile a 360 gradi, che ti permette di scattare foto da qualsiasi angolazione. Inoltre, è personalizzabile al massimo, grazie ai vari stili di pareti disponibili.&nbsp;Con la mia photobox, potrai migliorare notevolmente la qualità percepita dai tuoi clienti dei tuoi prodotti. Le tue foto saranno più professionali e accattivanti, e i tuoi clienti saranno più propensi ad acquistarli.&nbsp;Scarica il modello subito e inizia a scattare foto professionali delle tue creazioni!

Photobox: Take professional photos of your creations

Photography

This model was originally uploaded <a target="_blank" href="https://www.printables.com/model/452124-under-desk-drawer-with-double-travel-stops" rel="nofollow noopener">here</a>, check out the previous 50+ makes and comments<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/194310/2023-11-22_741ebdf3aad638.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/194310/2023-11-22_2ef855184807e.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/194310/2023-11-22_7e7782bb7c62a8.png"></figure>&nbsp;The remix adds built-in travel stops, added “tails” for stability when open, a double depth drawer version and more.&nbsp;Rails are designed for 6Gx20mm countersunk screws (or 4mm x 20mm)

Under Desk Drawer with Double Travel Stops

Toolholders, racks and cabinets

SpectreGadget

FYI, I have created several other versions.  Print the R4 profile for the new AMS<ul><li><a target="_blank" href="https://makerworld.com/en/models/30631#profileId-112717" rel="nofollow noopener">AMS Glass Separation LED Riser for COB LEDs</a></li><li><a target="_blank" href="https://makerworld.com/en/models/190027#profileId-209722" rel="nofollow noopener">Glass Separation LED Riser (no AMS)</a></li><li><a target="_blank" href="https://makerworld.com/en/models/190665#profileId-210450" rel="nofollow noopener">Glass Separation LED RIser for COB LEDs (no AMS)</a></li></ul>&nbsp;*** UPDATE 6/25/24 - I&#39;ve recently ordered and received a new NEON-type LED strip that can replace the original I had used.  This one comes with an optional inline switch with remote capability, which is a nice addition.  Without that, it is quite bright.  You can find it on Amazon at <a target="_blank" href="https://www.amazon.com/dp/B0CVW36X26" rel="nofollow noopener">B0CVW36X26</a>.   It&#39;s a ‘snug’ fit with the R4 profile, so will likely not work with the original “0.2mm layer, 3 walls, 15% infill” profile.&nbsp;*** UPDATE 12/18/23 - <a target="_blank" href="https://makerworld.com/en/models/14025#profileId-104675" rel="nofollow noopener">R4 profile</a> now live with these updates:<ul><li>Supports NEW AMS design and should support all AMS designs</li><li>Wider channel for NEON LED strips since the newer ones are a bit wider. Narrower strips may need 3M tape to secure</li><li>Slightly decreased bottom perimeter improve fit for some filaments/settings that may cause some &#39;elephant foot&#39; at the base</li><li>Added small lip at front to keep glass in place for more energetic printer movement</li><li>Increased gap between parts by 0.05mm to make assembly easier for some materials that are less exacting</li><li>Added numbers on the bottom to help with aligning for assembly</li><li>Added Holder Clips to the R4 profile, four on each of the two plates. Brim is enabled for the clips.</li></ul>I originally started to make a riser with vents for when I print PLA, but decided to go a different route. I wanted to meet these requirements:<ul><li>Move the AMS off the top glass</li><li>Be able to vent the top, but keep the glass with the printer</li><li>Easily remove the glass to get into the printer, without moving the AMS</li><li>Add additional LED lights in the form of “neon” type LED strip</li><li>Keep as minimal / minimalistic as possible, with a low profile and not take a lot of filament, &lt;500g</li><li>Keep it all together, avoiding wall mounting or sitting to the side</li><li>No supports required</li></ul>This riser has a second shelf above to hold the glass top, allowing venting, but keeping the top with the printer.The gap between the parts is 0.1mm for the original profile so it&#39;s meant to be a tight fit that stays together. The R4 profile has slightly larger gaps at 0.15mm.&nbsp;If you only print PLA, then printing in PLA will be ok. Best to print in either PETG, ASA, or ABS, especially if your chamber temps get to 50+ as then you are getting close to the glass transition temp of PLA and could cause problems.&nbsp;“Holder Clip.stl” is a clip that can be used to hold the LED power cord along the back before exiting the riser. “Holder Clip.3mf” has 6 of them.&nbsp;The original light strip I used was the vimeepro 5V USB LED Neon Lights Strip 3.3ft neon Rope Lights Flexible Waterproof Neon LED Strip from Amazon: <a target="_blank" href="https://www.amazon.com/gp/product/B0BB724ZS9" rel="nofollow noopener">B0BB724ZS9</a>. I like these lights as they provide good additional light without washing things out. If those are not available, you could use the 6&#39; one and cut it short as needed. <a target="_blank" href="https://amazon.com/gp/product/B0B73VGSCL" rel="nofollow noopener">B0B73VGSCL</a>. Availability of these seems to go in and out of stock. I would think that similar “NEON”-type LED strips should work. Another option provided by <a target="_blank" href="https://www.printables.com/@moebis" rel="nofollow noopener">@moebis</a> is <a target="_blank" href="https://share.temu.com/u5L2QMYplFA" rel="nofollow noopener">https://share.temu.com/u5L2QMYplFA</a>&nbsp;

AMS Glass Separation LED RIser

Bambulab add's and mod's

This was originally uploaded <a target="_blank" href="https://www.printables.com/model/384997-honeycomb-storage-wall-hsw-bambu-x1cp1p-max-wall-p" rel="nofollow noopener">here</a>, check it out to see past makes and comments--Honeycomb Storage Wall's wall piece - remixed to max out the usable plate on the Bambu X1/X1C/P1P252x248 is the biggest possible but requires a bit of tinkering to print this, see here if you want to print this one: <a target="_blank" href="https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations" rel="nofollow noopener">https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations</a>Otherwise, use the 252x224 one (see the slicer screenshot for where to place it on the plate)&nbsp;Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my other Honeycomb Storage Wall models including framed wall sections:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/253223/2023-12-10_f8b815429fd9d.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/253223/2023-12-09_19d31ded4922d.jpg"></figure>&nbsp;

Honeycomb Storage Wall HSW - Bambu X1C/P1P/P1S Max Wall Piece

Tools

Rockman

First Layer Test X1 - X1C - P1P - P1PS

First Layer Test X1 - X1C - P1P - P1S - A1

Print test

GekoPrime

I tried another spool winder but found it finicky and delicate.I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable windersWhy pick this model:<ul><li>Prints on a single build plate</li><li>Doesn't require heat set inserts or exotic hardware</li><li>Fusion and STEP files are available, remixes welcomed</li><li>Generous clearances, simple mechanisms</li><li>Designed to be a tool, not a project</li></ul>Print time:<ul><li>~500 grams of filament</li><li>~22 hours on Bambu Lab X1</li><li>~5 minute assembly</li><li>~2 minute spool transfer</li></ul>Hardware requirements:<ul><li><a target="_blank" href="https://www.amazon.com/s?k=608+bearings" rel="nofollow noopener">14x 608 skate bearings</a></li><li>A scrap of PTFE tubing</li><li>An electric screwdriver or drill with <a target="_blank" href="https://www.homedepot.com/p/DEWALT-MAXFIT-3-5-in-2-Philips-Bit-DWA3PH2MF/309474882" rel="nofollow noopener">a bit cut from ¼ inch hex stock</a> (most <a target="_blank" href="https://www.amazon.com/ITP1201-SCRWDRVNG-2IN-1-IMPAC/dp/B01LZZ7AOS/" rel="nofollow noopener">cheap quick change Philips bits</a> in the US fit this requirement)</li></ul>Print settings:<ul><li>Any. I used "0.16mm Optimal" in BambuSlicer with 5% adaptive cubic infill </li><li>Use 100% concentric infill for spindle_male_driven</li><li>Try the STLs if you have a problem with the 3mf files. I’ve added (xN) to each file name so you know how many to print</li></ul>Materials:<ul><li>Any. I used Polyterra and iiidmax PLA+</li><li>Use TPU for tpu_consumable_wiper_blade. I used Priline 98a. The wiper blades aren’t 100% required but they help keep the windings nice and tight</li></ul>Assembly and usage:<ul><li><a target="_blank" href="https://youtu.be/DxgkYDrRK-U" rel="nofollow noopener">Demo video</a></li><li><a target="_blank" href="https://youtu.be/-Hy69YwRLBw" rel="nofollow noopener">Assembly video</a></li><li>The side that says “Pastamatic" needs to face outwards, away from the spool</li><li>The filament needs to come in under the target spool, like this: O____O<ul><li>[not like this: O‾”‾”‾”O]</li></ul></li><li>The drill/driver needs to run clockwise, as though you're screwing something in</li><li>Accelerate slowly until the winder gets started</li></ul>Change log<ul><li>2023-05-28<ul><li>Initial release</li></ul></li><li>2023-05-29<ul><li>Fix a minor export glitch in "leadscrew_tooth"</li><li>Increase the number of “pin_short” instances in the 3mf from 6x to 8x</li></ul></li><li>2023-05-30<ul><li>Add a second prearranged 3mf with two plates to avoid overlap warnings</li><li>Disable autogenerated brims for the single plate 3mf </li><li>Add STLs for people who have trouble with the 3mf</li></ul></li><li>2023-06-03<ul><li>Add a ring to passive_target_cradle to prevent the far end of the target spool lifting if a user lets the the drill hang loose</li><li>Add a pin to driven_target_cradle prevent the leadscrew popping out</li><li>Fix a minor clearance issue where a dovetail didn't fit quite right</li></ul></li><li>2023-09-30<ul><li>Reduce chamfer on the crossbars to prevent them falling over when bed adhesion is poor</li><li>Add some holes to the crossbars to make them easier to screw down</li><li>Add some popular acessories to the all-in-one .3mf</li><li>Add a printable spool to the all-in-one .3mf</li></ul></li></ul>How to contribute:<ul><li>Post your make, it keeps me motivated to improve the model when I see people using it!</li><li>Post your feedback, idea or remix in the comments!</li><li>There are a few improvements and accessories in development as remixes, check those out if you‘re up for the alpha/beta tester experience<ul><li><a target="_blank" href="https://www.printables.com/model/498743-pastamatic-37-mm-motor-mount" rel="nofollow noopener">Adapter for 37mm gear motor</a></li><li><a target="_blank" href="https://www.printables.com/model/556405-pastamatic-filament-spool-winder-modifications-bra" rel="nofollow noopener">Source spool holder for 5 KG spools</a></li></ul></li></ul>Credits:<ul><li><a target="_blank" href="https://www.printables.com/@MiklosKiszely_486882" rel="nofollow noopener">@MiklosKiszely_486882</a> for the original idea</li><li><a target="_blank" href="https://www.printables.com/@PsychoShaft_33891" rel="nofollow noopener">@Psycho Shaft</a> for the drag/tensioner concept</li><li><a target="_blank" href="https://www.youtube.com/@thang010146" rel="nofollow noopener">thang010146</a> for YouTube videos of mechanical mechanisms, particularly the self reversing leadscrew for a level cable winder</li></ul>&nbsp;