jappi247

Reclip

Collection of brackets and braces of different sizes and types.Designed for 4mm screws.&nbsp;Non-countersunk version here:<a target="_blank" href="https://makerworld.com/en/models/167900" rel="nofollow noopener">https://makerworld.com/en/models/167900</a>&nbsp;Print settings:layer height: 0.12-0.16 for max strenghtperimeters: maxsupports: no&nbsp;In case you're missing any type or size, please let me know and I will create a new model and add it to this collection.

Ultimate brackets collection

Household

ShakaStudio

You can mix and match any colors.I suggest use:Color 1 : BlackColor 2 : Dark Hue ColorColor 3 : Light Hue ColorColor 4 : White&nbsp;Print at 100% infill with a layer height of 0.16mm with a base layer of 0.24mm&nbsp;Swap Instructions: Start with Matte Black At layer #12 (2.88mm) swap to Red At layer #16 (3.2mm) swap to Fl Red At layer #21 (3.6mm) swap to White for the rest.

Tiki Coasters - 4 Colors - Hueforge Filament Painting

wall art

juice902

A more ergonomic version of SmileyPrinter's TikTok bolt-action fidget toy. There's a version with and without speed holes.&nbsp;Requires 7 6mm x 3mm circular neodymium magnets (ex <a target="_blank" href="https://www.amazon.com/gp/product/B096LZNZTQ)." rel="nofollow noopener">https://www.amazon.com/gp/product/B096LZNZTQ).</a> Included SmileyPrinter's diagram of orientation for reference.&nbsp;I advise printing the bolt core (13mmErgoCore) horizontally with support and shaving/sanding until smooth for added rigidity, though this is not required. I would also advise printing the main body on the flat, diagonal surface at the rear of the toy with tree supports enabled @25 degrees.

Ergo TikTok Bolt Action Fidget Toy

Print List

DavidsGotWood

<h4>About</h4>A simple yet secure holder for the<a target="_blank" href="https://www.ifixit.com/Store/Tools/Mako-Driver-Kit--64-Precision-Bits/IF145-299" rel="nofollow noopener"> iFixit Mako Precision Bit Set</a> for the Ikea Skadis pegboard using the Skadis Ultimount connector. Neither the primary holder nor the Ultimount connectors require any support to print (which is a massive negative of many Skadis mounts).&nbsp;<a target="_blank" href="https://cad.onshape.com/documents/f82dd3732fce09e29751d5da/w/03da112d652816756bcc02af/e/1352b178bf6a87719fd3a382?renderMode=0&uiState=631600b74c1aa7131683948f" rel="nofollow noopener">Edit/Remix in Onshape</a><h4>Print instructions</h4><ul><li>Supports Needed: No</li><li>Bed Plate Adhesion Needed: None</li><li>Print Orientation: Print upright with the bottom on the build plate</li><li>Materials: PLA, PETG etc. (example was printed with <a target="_blank" href="https://polymaker.com/polyterra-pla-info/" rel="nofollow noopener">PolyTerra PLA</a> in Fossil Grey).</li></ul>

Household

wall art

Print List

skadis

meta