Jamm3d

snakegreen88

I generated a 4 color STL of Demon Slayer Giyu with the amazing HueForge program. I used blue colors but you can use any color combination you want but it is recommend to go from dark colors to light colors. if you interested in how I made this file you should check out HueForge its very affordable and only takes some messing around to get used to the program and make amazing looking prints.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Azure Blue Transmission Distance: 3 PLA PolyLite Aqua Blue Transmission Distance: 2.5 PLA Polylite Cloud White Transmission Distance: 6Swap Instructions: Black until layer #5 at 0.48mm Azure Blue until layer #9 at 0.8mm Aqua Blue until layer #17 at 1.44mm Cloud White for the rest. The slicer software I used was Bambulab and the printer is the Bambu X1 carbon with AMS.&nbsp;Keep and eye out if your interested in more HueForge models I plan to upload many more.Thanks

HueForge Demon Slayer Giyu

Semaj 

create3d.co

Straight from Bikini Bottom&#39;s Jellyfishing fields. This guy was inspired by the octopus flexi toy&nbsp;Layer Height: 0.16 Infill: 10% Use CA Glue to Connect parts

Spongebob Jellyfish Flexi Mini

stuff that’s cool

Acheituno

This is a manual filament spool winder inspired by the bmsluite model, originally made for splicing and winding multiple spools of leftover filament onto a single roll.&nbsp;From there it has been modified to achieve a simple and effective fully manual filament spool winder, which does not need any metal parts or other parts and which will help you rewind your filaments easily.&nbsp;Its main use is to change the filament from one spool to another, for example to recharge filament in Bambu Lab spools for greater and better use of the AMS.&nbsp;It has also been redesigned and separated into the necessary parts with connectors so you can print it on your Bambu A, X or P series&nbsp;I have done test with three complete ones, all made with Bambu Pla Basic, 25% filling should be enough, If you have issues you can increase the filling of the parts that are subjet to greater stress like hand crank (recomended 65% filling) or use PETG/ABS/ASA. In addition you can also vary the printing position to give greater strength. A drop of lubricant on the gears and hand crank will help ensure smoother, longer-lasting operation without issues&nbsp;Enjoy it!!

Semaj

stuff that’s cool

usefull