jameswboone

nikola

<h3>Pixel Board</h3><figure class="image image_resized image-style-align-center" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_lon3dtlzddwb.jpg"></figure>&nbsp;Changes:&nbsp;2023-10-15: Fixed the case which had incosistent edge.&nbsp;___&nbsp;&nbsp;PixelBoard is, as the name implies, a board that you can put 3D printed small squares aka “pixels” in and use it as a decorative piece, the board is 24 pixels wide and 12 pixels tall. The compact overall design fits on pretty much every printer, including Prusa Mini. If you're wondering what kind of designs can be made with pixels and a board of this size, scroll down to the bottom for some design examples.I recently found a similar model to this, and I noticed it had a few design flaws - but due to its licensing which didn't allow any modifications (remixes), I couldn't make any improvements to it - so I made an entirely new project from scratch over the weekend, and you can remix, share, and adapt it in any way you want - STEP files are included as well!&nbsp;Since it's literally designed over the weekend and not used over a longer period, if you have any improvement suggestions, feel free to make a remix or to comment.&nbsp;It's designed from the ground up for FDM printing, no supports, or anything similar required. It makes (optional, but recommended) use of 6x3mm magnets to hold the board firmly in the case, and the case itself doubles as a storage - and can hold more than 4 times the number of pixels required to fill the entire board, all in 4 different compartments, so you don't have to search through piles of different pixels to find the color you want.&nbsp;I have printed all the files on my X1C using generic 0.2mm settings with different filaments I had lying around, but please before you print everything at once, see below for print instructions and fit test models.&nbsp;<h3>Required materials:</h3>&nbsp;<ul><li>Optional: four 6x3mm magnets. These will hold the board extremely well in place, so much so that I had to design a push pin to push the board from the back, this is ideal since the box doubles as storage, and you don't want to have 1000+ pins accidentally drop on the floor.</li><li>3D Printer with at least 165mm bed size width - Prusa Mini can fit and print this.</li></ul><h4> </h4><h4> </h4><h4>Parts and print settings</h4><h4> </h4><h4>Board</h4><figure class="image image-style-align-center"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_79e71rpcqru4.jpg"></figure><h4> </h4>The board is printed using default settings of 0.2mm or lower, but there is no significant benefit of printing lower than 0.2. It requires no additional settings or anything else. Just make sure you're printing this with a dry filament to avoid any stringing which may lead to pixels not fitting quite well afterward.<h4>Pins</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_fx9bx521pug5.jpg"></figure>&nbsp;The Pins are all 5x5mm for the cube part, as the tolerances for this are built into the board directly, but the diameter of the cylinder part may vary from printer to printer, and based on what kind of fit you want. I've included the pins with the cylinder at the following diameters: 5.00mm, 4.98mm, 4.96mm, 4.94mm, 4.92mm, and 4.90mm. They all have the size in their name Pin500 is Pin with a diameter of 5.00mm, Pin492 with diameter of 4.92mm, and so on.You need 288 pins to fill the whole board, I've included files with 298 pins to have some spare. If your printer bed adhesion isn't that reliable, I'd recommend printing in smaller batches instead of everything at once.&nbsp;You can print these in 0.2mm layer heights as well. No brim is required, and if you use it then it might be difficult to remove afterward.So, how do you know which pin size to print?&nbsp;<h4>Fit Test Files</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_jjvpqn24uwh2.jpg"></figure>&nbsp;I've included a small 3x3 test board, print this, and all different pins and see which one fits best. If none of the pins fit, then you can, of course, use the scale feature of the slicer to adjust it, or modify the step files, but it means that your printer isn't quite accurate enough and this may lead to other issues as well. Use the same filament and same settings that you will use later on.For me personally, Pin498 fits the best.<h4>Case</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_qendaq3orl0u.jpg"></figure>&nbsp;The case requires no supports and is designed to be printed this way. You can use any layer height that you want. 0.2 layer height produces nice results, and especially with some sanding, can be pretty. There are no major structural demands here, other than the magnets that are held in place. &nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_fwumhu5dey4w.png"></figure>Magnets/PushPin&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_7tw888ogds6s.jpg"></figure>If you decide to use magnets, you can put them in the side of the case, as well as the board, so they hold when the board is in place. There should be enough clearance to do a simple press fit for the magnets, bit if they keep falling out just add a drop of superglue.&nbsp;However, these magnets can be pretty strong, and getting the board out - when it's full of pins, can be very difficult, so I've designed a pin that goes from the front of the case to the back - make sure to put this in BEFORE you put the board in. The pins are pretty small, only 5 mm and barely noticeable, due to the small size, you'll need something to push them in from the back. If you don't want to deal with that, and you don't mind compromising on the design, there's also a long push pin version, this will stick out on the back 20mm and allow you to push it with your finger easily. Print both and try it out.The pins can be printed either way, and you don't need infill for them - 2 or 3 walls should do the trick.I printed mine in this orientation, so I get a smoother back-side finish. But this is up to you and how well your bed adhesion is. You can use brim on this to ensure it prints properly.<figure class="image image-style-align-center"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_wfahmznx9v0y.png"></figure>&nbsp;<h3>Assembly</h3>&nbsp;The assembly is pretty straightforward:&nbsp;<ul><li>Put the push pin in the case so you don't forget it.</li><li>Add magnets to the case and the board - make sure to orient them correctly</li><li>Done</li></ul>&nbsp;<h3>Design examples</h3>Besides the example image above, there are numerous designs that fit on a 24x12 board, here are some examples - and often you can even fit two of these on the board, or scale them down/up as you wish, as they don't use the entire space by themselves&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_kfdej6cryrvf.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_skdiiybul83w.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_pmm1qbz5sn0m.png"></figure>These screenshots come from <a target="_blank" href="https://www.brik.co/pages/gallery-search?q.size.height.min&q.size.height.max=12&q.size.width.max=24&q.size.width.min" rel="nofollow noopener">https://www.brik.co/pages/gallery-search?q.size.height.min&q.size.height.max=12&q.size.width.max=24&q.size.width.min</a>&nbsp;

Pixel Board

Baby Toys 

Mdesign

Side bin for pooped calibration line. Enjoy ! ☺️🤌

Bambu bin for pooped line P1S X1C

Printer Equip

DPJRodrigues

Braun OralB Docking Station – your personal oral care organizer!&nbsp;Made to hold one electric brush and up to four brush heads, this docking station keeps your bathroom neat and your essentials in one place.With secure slots for each brush head, it&#39;s designed for simplicity and convenience. Plus, it&#39;s easy to clean up, ensuring hassle-free maintenance.&nbsp;UPDATE:2024-03-25 - Added version with 2 and 3 brush head holders&nbsp;╭─━━━━━━━━━━━━━━━━━━━━─╮   Buy me a ☕️ or a 🍺     <a target="_blank" href="https://www.buymeacoffee.com/dpjrodrigues" rel="nofollow noopener">https://www.buymeacoffee.com/dpjrodrigues</a>  ╰─━━━━━━━━━━━━━━━━━━━━─╯  Checkout as well my other models:Fun Frog and Panda Toothpaste Squeezers<figure class="image image_resized" style="width: 70%"><a href="https://makerworld.com/en/models/402057" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000387179/design/2024-03-29_0cdf610e6c2fd.jpg"></a><figcaption><a target="_blank" href="https://makerworld.com/en/models/402057" rel="nofollow noopener">https://makerworld.com/en/models/402057</a></figcaption></figure>Pokemon Toothpaste Squeezer<figure class="image image_resized" style="width: 70.09%"><a href="https://makerworld.com/en/models/386783#profileId-287251" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000387179/design/2024-03-21_12b7df932811d.jpg"></a><figcaption><a target="_blank" href="https://makerworld.com/en/models/386783#profileId-287251" rel="nofollow noopener">https://makerworld.com/en/models/386783#profileId-287251</a></figcaption></figure>Brick compatible Fidgets<figure class="image image_resized" style="width: 70%"><a href="https://makerworld.com/@dpjrodrigues/collections/1121520" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000387179/design/2024-04-23_aefa99af589f2.png"></a><figcaption><a target="_blank" href="https://makerworld.com/@dpjrodrigues/collections/1121520" rel="nofollow noopener">https://makerworld.com/@dpjrodrigues/collections/1121520</a></figcaption></figure>╭─━━━━━━━━━━━━━━━━━━━━─╮ Buy me a ☕️ or a 🍺 <a target="_blank" href="https://www.buymeacoffee.com/dpjrodrigues" rel="nofollow noopener">https://www.buymeacoffee.com/dpjrodrigues</a> ╰─━━━━━━━━━━━━━━━━━━━━─╯

Braun Oral B Docking station for OralB

Home

Jag_CDN

Holder (6 and 10 coasters included):<ul><li>0.4mm nozzle</li><li>0.2mm layer height</li><li>Scale on Z axis to your preferred number of coasters to hold. Designed to hold 100mm X 5mm coasters, allow 4mm for holder base. So if you want a holder for 4 coasters scale Z axis to (4x5+4) =24mm</li><li>If you like the F1 coasters they can be found on my profile.</li></ul>&nbsp;

Coaster Holder - 100mm - Scalable

Jan Vejtasa

Catacombs of Karak is a great game full of emotions. Sometimes these emotions turn into dangerous movements and can distort cards on the table. This 4x4 grid helps with that. And oh yeah, its stackable and connectable too! You can use it with Karak or Carcassonne. . I used PLA, but pretty much any 3D material will do just fine as long as it doesnt warp.  After printing, just cut off the small brim between the connections (see final look of the part in the photos) and enjoy.  I also included a 3x3 version for smaller printers such as Prusa mini or A1 mini.

Ultimate Karak & Carcassonne tile grid holder

Carcassonne 

Think3D

Check out my new Stortrooper model:<a target="_blank" href="https://makerworld.com/en/models/435381" rel="nofollow noopener">https://makerworld.com/en/models/435381</a>&nbsp;&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Start with Black At layer #10 (0.88mm) swap to Gray At layer #14 (1.2mm) swap to White for the rest.&nbsp;___________________________________________________________________________________If you like my work, please consider a small donation :) Thank you very much :*<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8" rel="nofollow noopener">https://www.paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8</a>&nbsp;Store: <a target="_blank" href="https://thinkto3d.etsy.com" rel="nofollow noopener">https://thinkto3d.etsy.com</a> Commercial license: <a target="_blank" href="https://patreon.com/Think_3D/membership" rel="nofollow noopener">https://patreon.com/Think_3D/membership</a>&nbsp;

StormTrooper Star Wars - HueForge

HueForge

Makerspace.Online

A 3D printable Businesscard embosser, can be assembled without any hardware, everything just snaps together. I designed this businesscard embosser to be modular and 3D printable without using any support and without any hardware required to assemble. The tollerances are tight. And some materials work better then others. I have had best results using Basic PLA. Available patterns:3 Rollers available, more patterns can be found on <a target="_blank" href="https://makerworld.com/en/u/2755972568" rel="nofollow noopener">my makerworld page!</a> - Confetti - ZigZag - Polkadot Follow me on <a target="_blank" href="https://www.instagram.com/makerspace.online/" rel="nofollow noopener">my instagram</a> for updates on new patterns and uploads! Assembly:  (Pro tip: use some lubrication grease / vaseline around the gears for a better working!!) <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/2024-01-20_cca5dc6403a79.png"> Make sure to allight the bottom gears maked with the dot and allign with the stipe.  Do not forget to add some lubrication / grease between and underneath the gears! <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/2024-01-20_d2c9531e7e588.png"> For the top gears some marks are present as well to allign the gears properly! Also here! Do not forget to add some lubrication / grease between and underneath the gears!<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/2024-01-20_2b0339c954b2b.png"> Note:  This design is licensed under a <a target="_blank" href="https://creativecommons.org/licenses/by-nc-sa/4.0/" rel="nofollow noopener">Creative Commons Attribution-Noncommercial-Share Alike</a> Please do not sell this file or printed product. <a target="_blank" href="https://www.instagram.com/makerspace.online/" rel="nofollow noopener">Instagram:</a> <a target="_blank" href="https://www.instagram.com/makerspace.online/" rel="nofollow noopener"><img class="image_resized" style="width: 8.56%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/a1ec037c-99fb-4f6f-9216-f4866257bed3.png" alt="Instagram, logo, social, social media icon - Free download"></a>

Business Card Embosser - Level up your cards! 

Kraft

Martin Kozak

<h3>Model</h3><ul><li>Model is 45 cm long, consists of 70 pieces and needs 720 g of PLA filament. Total print time is about 30 hours.</li><li>Biggest part is 214 x 118 mm and does not fit A1 mini build plate.</li></ul><h3>Postprocessing</h3><ul><li>Remove supports.</li><li>Use deburring tool to remove sacrificial bridging inside the holes.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/469116/2023-12-30_7f665c461fbba.jpg"></figure>&nbsp;<h3>Assembly</h3><ul><li>See attached assembly guide.</li><li>Due to the printer tolerances and nature of FDM printing, sometimes you'll need to apply more strength to assemble, some parts will be little loose and need a glue to secure it in position and whole drive train will need a lubrication in order to make it work smoothly (PTFE lubrication or silicion oil in spray recommended).</li></ul>See my other upscaled creation:<ul><li><a target="_blank" href="https://makerworld.com/en/models/114353#profileId-122927" rel="nofollow noopener">https://makerworld.com/en/models/114353#profileId-122927</a></li><li><a target="_blank" href="https://makerworld.com/en/models/133466#profileId-144784" rel="nofollow noopener">https://makerworld.com/en/models/133466#profileId-144784</a></li><li><a target="_blank" href="https://makerworld.com/en/models/146718#profileId-159991" rel="nofollow noopener">https://makerworld.com/en/models/146718#profileId-159991</a></li></ul>

Helicopter 300 %

Lego

madizmo

This is the latest version of my AMS saver after bambu asked me to take down my old models. Apparently some people managed to damage the feeder leds with some of the previous models. This version mounts to the top of the feeder unit using double sided sticky tape so there is absolutely no chance of causing any damage to your AMS unit. I used the clear 1mm thick sticky tape off Temu on mine and they are stuck very well. I&#39;ve been using 100mm ptfe tube with no issues, if you seem to get loading issues try 85mm. The ID of the ptfe hole is 4.2mm but because of the print orientation it can still be tight, i run an allen key through it along the top edge to smooth the layers a bit. You can play with flow rate a bit as well if too tight&nbsp;works best with my <a target="_blank" href="https://makerworld.com/en/models/172221#profileId-189118" rel="nofollow noopener">filament guides</a>, the ones in the pictures i&#39;m still testing but the originals work great&nbsp;&nbsp;Disclaimer: This is a modification to the machine and any issues caused by these mods will not be covered by Bambu.

AMS Saver V5

Aurillion

Update 05.Feb.2024 : I have added an STL with 0.1 mm narrower arm connections in case there are problems with it being too tight.Loving bear Valentine's Day greeting - 3D Kit Card&nbsp;Description:🐻💖 Surprise your loved one with this adorable 3D kit card model - the perfect gift for Valentine's Day! This cute bear holds a heart that says "Happy Valentine". But that's not all! I've also added an additional model where you can add your own text to the heart using the Bambu Slicer - be it a sweet love saying or a personal message like "Love u".&nbsp;🌈 Multicolor design: The diverse color options allow you to adapt the model to your loved one's preferences. Experiment with different filaments to find the perfect combination for your bear love.&nbsp;🧩 Easy to put together: The individual parts of this kit card are designed to be easily cut out and pinned together. The connections vary depending on the filament.&nbsp;💝 A gift with a heart: This 3D kit card is not only a sweet gift, but also a creative way to express your love. Add your personal touch and make this Valentine's Day unforgettable.&nbsp;Download the model now and get ready for a heartwarming surprise on Valentine's Day! 🎁✨

Valentine Kit Card

Signs

Tommy Gun

There it is !!! the question mark piggy bank is finally arrived !!&nbsp;Really print ! all neatly seperated to save on filaments !!&nbsp;Brother coaster box : <a target="_blank" href="https://makerworld.com/en/models/99183#profileId-105765" rel="nofollow noopener">https://makerworld.com/en/models/99183#profileId-105765</a>&nbsp;Pen Box&amp;Pipe holder : <a target="_blank" href="https://makerworld.com/en/models/141100#profileId-153752" rel="nofollow noopener">https://makerworld.com/en/models/141100#profileId-153752</a>&nbsp;Question mark lightbox : <a target="_blank" href="https://makerworld.com/en/models/127720#profileId-138211" rel="nofollow noopener">https://makerworld.com/en/models/127720#profileId-138211</a>&nbsp;Self watering Planter Question Mark block : <a target="_blank" href="https://makerworld.com/en/models/406677#profileId-308652" rel="nofollow noopener">https://makerworld.com/en/models/406677#profileId-308652</a> &nbsp;Snug fit on the question mark is intended (Scale to 101% if ya wanna use glue), and use a little glue on the dots !! &nbsp;Enjoy !!&nbsp;Let me know if anything&nbsp;Interested in selling my prints :<a target="_blank" href="https://patreon.com/Papa3dHomemadePrints" rel="nofollow noopener">https://patreon.com/Papa3dHomemadePrints</a>&nbsp;&nbsp;

Super Mario Question Mark Piggy Banky

Gifts

Kit Crafters

<h2>geodragon</h2><h4>tolerance test toy</h4>geodragon is a tolerance test toy of a simple geometric dragon with print-in-place hinges and joints. The whole model is one single piece and needs no supports and no assembly; the whole dragon comes off the build plate in one piece. I was inspired to make it after the popularity from my previous model, <a target="_blank" href="https://makerworld.com/en/models/129392#profileId-140259" rel="nofollow noopener">miniman</a>.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/395035/2024-01-12_62d84fec921f4.png"></figure>&nbsp;The geodragon fits perfectly on the A1 mini and so can be printed on all Bambu Lab printers (as of Jan. 2024).&nbsp;Each part has a 0.2mm clearance in which the body parts should not fuse together. If your printer and material is tuned well, your parts will print with minimal to no fusing and the hinges and articulation points can all move freely without falling apart.&nbsp;The tail features ball-and-socket joints, while the rest of the model uses gate hinges and ‘disc’ joints. The mouth opens up too!&nbsp;Four profiles are provided:<ul><li>X1/P1/A1:<ul><li>Standard Tolerance, needs a well tuned printer and material profile</li><li>Extra Tolerance, easier to print overall, with looser joints</li></ul></li><li>A1 mini:<ul><li>Standard Tolerance, needs a well tuned printer and material profile</li><li>Extra Tolerance, easier to print overall, with looser joints</li></ul></li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/395035/2024-01-12_e3fcdb0aecaea.png"></figure>For those dragon lovers, the geodragon is a wyvern, with two legs and two wings, based on this popular graphic shared online.&nbsp;<img src="https://qph.cf2.quoracdn.net/main-qimg-cac88eabf8ff6ae3d081c6053ed36bba.webp">&nbsp;Some notes I've found while testing:<ul><li>PLA Matte is best at not fusing, PLA Basic was more likely to fuse</li><li>The tail ball-and-socket joints are the most difficult part, if the printer isn't tuned well they can break when trying to turn them</li><li>This is all done with 0.4mm nozzle, 0.2mm nozzles will do much better</li><li>The mouth may need a small pointed tool to open, like tweezers</li><li>Bambu Lab, Sunlu, and Polymaker filament were used to test this without issues!</li></ul>&nbsp;Good luck printing!

geodragon - Tolerance Test Toy

Dragon Toy

Waikikiprod

labels for IKEA Hallbar bins series.Printable in one or two colors.Practical for differentiating your binsAll you need is a double-sided tape to stick them in the area provided for this purposeMany versions available. Possibility to create new ones on request ;)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-08-15_2cen33u7izz1.jpg"></figure>Follow me on<a target="_blank" href="https://www.instagram.com/waikikiprod/" rel="nofollow noopener"> Instagram</a> / <a target="_blank" href="https://www.tiktok.com/@waikikiprod" rel="nofollow noopener">TikTok</a> / <a target="_blank" href="https://www.facebook.com/waikikiprod" rel="nofollow noopener">Facebook</a> / <a target="_blank" href="https://beacons.ai/waikikiprod" rel="nofollow noopener">Beacons </a>Discover My Best 3D Models<figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/fr/models/14009?profileId=13993" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_49db957f2d46d.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/14009?profileId=13993" rel="nofollow noopener">X1C Keychain</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13847?profileId=13645" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_03b57abb0262f.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13847?profileId=13645" rel="nofollow noopener">Axe Magnet</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13841?profileId=13635" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_d454006b5cde4.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13841?profileId=13635" rel="nofollow noopener">Tank toy - Print in place</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/fr/models/13159?profileId=13163" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_ec02bcb1e833b.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13159?profileId=13163" rel="nofollow noopener">Foaming Soap Dish</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13723?profileId=13450" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_e177dc4e45a09.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13723?profileId=13450" rel="nofollow noopener">The console of your childhood</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13846?profileId=13640" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_2d9999d3ea301.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13846?profileId=13640" rel="nofollow noopener">The Ultimate Fidget Avocado Keychain</a></td></tr></tbody></table></figure>

Labels for Ikea HallBar

Kitchen

Ariox3D

<h4>PHONE FOLDABLE HOLDER I wanted a phone holder that I could always carry with me and I took as a reference the one I had been using for a long time and that I bought on Aliexpress (photos attached), I know there are some very similar ones to download but I wanted to make my own and I hope you like it.</h4> <h4>PRINTING Just print and use, I ran the tests with PLA and PETG at 0.16 layer height, 3 walls and 20% gyroid. once printed, please be very careful when opening the two parts, I adjusted the hinge as much as possible to barely have any slack.</h4> <h2>-Ariox3D-</h2>

Phone Foldable Holder

Phone

Makerneer

TLDR - Screw these onto Gridfinity bases that have the 3mm holes in the corners. Use M3x12 low profile fasteners. Clip into your car&#39;s air vents. Enjoy boundless organization bliss.Goes great with my <a target="_blank" href="https://makerworld.com/en/models/46587#profileId-48398" rel="nofollow noopener">Gridfintiy Dipping Sauce Holder! </a>&nbsp;Printing:Prints on it&#39;s side, no supports needed.I printed it in PETG. ABS/ASA would also work great. Skip PLA if you can since it&#39;s inside the car.Installation:The hole in the back of the adapter clip is tapered, so just screw in your M3x12 fastener and you should be good to go as long as you don&#39;t over tighten it. (<a target="_blank" href="https://amzn.to/45zDdQB" rel="nofollow noopener">https://amzn.to/45zDdQB</a> affiliate link to fasteners)There is a little bit of side to side rotation on purpose. This will allow you to adjust the clip a little if needed so it doesn&#39;t hit the knob or adjuster in the vent.One clip will probably work for single bases and small stuff, but two or more clips is recommended.Confirmed to work with these bases, likely fits many more:<a target="_blank" href="https://www.printables.com/model/300603-gridfinity-screw-together-baseplate" rel="nofollow noopener">https://www.printables.com/model/300603-gridfinity-screw-together-baseplate</a><a target="_blank" href="https://www.printables.com/model/360046-gridfinity-modular-baseplates" rel="nofollow noopener">https://www.printables.com/model/360046-gridfinity-modular-baseplates</a><a target="_blank" href="https://www.printables.com/model/368469-dovetail-gridfinity-base-short-v2" rel="nofollow noopener">https://www.printables.com/model/368469-dovetail-gridfinity-base-short-v2</a>&nbsp;&nbsp;TMI:So I started this by making a Gridfinity base that incorporated a built in vent clip, but it printed like poo and needed supports and yeah. Next try was making a clip that fit the dovetail style base. That printed better but was too floppy. So I tried to make one that fit the screw together bases but found that not all the screw bases have the holes in the same spot so it would only fit one style of base…Then I realized a lot of the bases have a 3mm hole for a fastener in the same place. Using this hole to attach the clip to would allow the clip to work with a wider range of bases, allow the clip to be printed in a good orientation and was really easy to install.Low on time to make the <a target="_blank" href="https://www.printables.com/contest/407-car-holders" rel="nofollow noopener">Car Holders</a> contest deadline I tried a couple existing clips instead of designing my own and goTVm&#39;s clip worked the best (and it included a step file, thanks!). Did some Fusion 360&#39;ing to adapt it to the Gridfinity base and voila, it works!And like any good procrastination project I&#39;m using to avoid the thing I should be doing instead I decided to increase the project scope and hit the Honeycomb wall organizer too… Check it out here if that&#39;s more your flavor of organization <a target="_blank" href="https://makerworld.com/en/models/46593#profileId-48403" rel="nofollow noopener">https://makerworld.com/en/models/46593#profileId-48403</a>

Gridfinity to Car Vent Adapter

Gridfinity

3D Print Masters Hub

Tic-Tac-Toe Game<ul><li>Great fun with the family.</li><li>Scale down as needed.</li><li>Easy print.</li><li>Enjoy!!</li><li>Please like and subscribe! More to come!</li><li>See bio for more exclusive print project ideas.</li></ul>🔥🔥 Check out my PRO MODELS HERE! <a target="_blank" href="https://cults3d.com/en/users/FabulousFilaments/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/FabulousFilaments/3d-models</a> 🔥🔥

Tic-Tac-Toe Game

Pro3DTinkering

Printed with Bambu PLA Sparkle, the final result is on my <a target="_blank" href="https://youtube.com/shorts/Mo0pMjjvWDI" rel="nofollow noopener">YouTube Channel.</a>&nbsp;Feel free to comment and share your prints; it&#39;ll be nice to see them. I would appreciate any feedback!&nbsp;To support my projects and gain access to a Commercial License, please consider joining my <a target="_blank" href="https://www.patreon.com/Pro3DTinkering" rel="nofollow noopener">Patreon</a> community. Your support helps bring more creative designs and exclusive content to life!&nbsp;Thank you,Happy Tinkering!

Ball Bearing Fidget

Fidget 

flo_vo

Welcome to Platform 9 ¾ enjoy printing.

Harry Potter Ornament 9 3/4 Christmas

Harry Potter 

9percent

Simple ornament for Christmas decoration.&nbsp;If the screw is tight, please use “screw_loose_size”.&nbsp;------thick version ring is added

Ornament 1

Christmas

Vixvvo 3D

I've created a desk drawer design before, and it received a lot of positive feedback. Building on that success, I've crafted a new version that features three separate drawers for organization! Attach it with double-sided tape or opt for drilling holes for a more permanent fixture. I'm open to hearing your ideas, so feel free to share them in the comments!&nbsp;&nbsp;All Commercial License, Will be available on my Patreon "Vixvvo3D" For a Low Price of 6$/Month. (currently trying to post & model 1/Weeks) <a target="_blank" href="https://patreon.com/Vixvvo3D" rel="nofollow noopener">https://patreon.com/Vixvvo3D</a>&nbsp;

Desk Organizer Drawer

Organizers 

codename7034

This is GUNS from PUBG for Dummy 13.WARNING! It is for 200% scale of Dummy 13&nbsp;Made by Michelincat

PUBG Guns for Dummy 13 (200% scale)

Dummy 13

LayerModels

Stunning sculpture of a life sized hand in a bionic style. An eye cathing art piece that truly shows the capabilities of 3D printing. Display on a shelf or mount it to a wall using the bayonet wall mount system.<ul><li>File includes left and right hand</li><li>Part is scalable (tested up to 50%)</li><li>No support needed. </li></ul>If you like my designs you can support me by downloading other poses <a target="_blank" href="https://cults3d.com/en/design-collections/LayerModels/bionic-hand-art" rel="nofollow noopener">HERE</a>&nbsp;<a target="_blank" href="https://cults3d.com/en/design-collections/LayerModels/bionic-hand-art" rel="nofollow noopener"><img src="https://media.printables.com/media/prints/633834/rich_content/56f8342b-1017-4195-98a5-f58b66cbb36a/3d-hand-poses.jpg#%7B%22uuid%22%3A%226c97b809-922e-4648-855f-51f2e99b67ff%22%2C%22w%22%3A2000%2C%22h%22%3A2000%7D"></a>&nbsp;3D PRINTING SETTINGS&nbsp;Tested in PLA with standard print profile. Use sufficient cooling for the overhangs. Brim advised for increased adherence to the print bed.----------Subscribe to <a target="_blank" href="https://patreon.com/LayerModels" rel="nofollow noopener">my patreon</a> if you are interested in a license to sell your prints commercialyFollow me on <a target="_blank" href="https://www.instagram.com/layermodels/" rel="nofollow noopener">instagram</a> to stay up to date with my latest 3D Models

Bionic Hand art - Standard

Hamstah

Update 25/11/2023: I've added stronger versions of all 3 sizes. Some people were having difficulty printing the original model, so I've increased the height and thickened the links to give the model quite a bit more strength. The trade off is that the model is slightly less flexible, but definitely still a lot of fun to play with. Hope that helps!--&nbsp;Dual sided triangle “chain mail” style fabric. Fun to play with! I recommend printing the tester first, as it is really important that the filament adheres well to the bed for a good print. If one triangle gets knocked off the bed, it can ruin the print (though I have had success if one or two get knocked loose).&nbsp;The easier model to print (and more fun in my opinion) is the 120mm square, but I included a 250mm wide strip for those that want more of it.&nbsp;I also highly recommend using a plastic scraper to remove the print from the bed, and you won't be able to get the fabric to release by bending the bed, and pulling on the fabric will snap the joints.&nbsp;Consider changing filament on the middle layer to get a second colour on the flip side of the fabric!&nbsp;Warning: The 250mm wide version of the fabric takes a very long time to slice!

Fabric Fidget

Want to Make

harrypulvirenti

It is basically an optimisation of the original design but is functionally the same. This remix eliminates a rear wall to use less material and makes overhangs less pronounced to make the model easier to be printed. I strongly recommend using brim to print it if you don't want to see the heel fall.You can find the suggested orientation used to print the object in the images.With the proposed orientation the object should fit without scaling it, you will maybe just need to move it a little bit into position, but some user reported that scaling it down to 95% also works well. &nbsp;I tested it with my X1C and is perfectly compatible. About the P1P the original model was compatible with the P1P without enclosure and this remix have the same compatibility