James

Lp3d

I have received several requests for a commercially licensed model.This model may be used commercially, in return I have included my Instagram name.&nbsp;I think this should be a fair deal for both sides ;-)

TicTacToe - KeyChain - Commercial Licence

Games

Just_Josh

This is an artistic representation of the way a mother&#39;s love can spread and create more love in the world. &nbsp;I printed this using 4 colors to show that it looks nice using a single AMS but there are a nine distinct layers that can be set to individual colors in the object panel. There is also an optional stand that should fit into the holes on the back of the mandala. The fit will be tight and if you want a permanent connection I would use a bit of glue.&nbsp;Thank you for looking and if you like what you see please checkout my other models: <a href="https://makerworld.com/en/@Just_Josh" rel="nofollow"> https://makerworld.com/en/@Just_Josh</a>

Mothers Love - A mandala

Holidays

Bunk.Wire

Second veesion, this time in flowerscreated with filament painting technique using hueforge software.&nbsp;Remember if you want to scale, do it only with x and y axis, z must be the same as original.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:     PLA BambuLab Basic Black Transmission Distance: 0.6     PLA BambuLab Basic Blue Gray Transmission Distance: 3     PLA BambuLab Basic Beige Transmission Distance: 8     PLA BambuLab Basic Jade White Transmission Distance: 5     Start with Black     At layer #6 (0.56mm) swap to Blue Gray     At layer #15 (1.28mm) swap to Beige     At layer #18 (1.52mm) swap to Jade White for the rest.  Swap Instructions: if you don't have ams just put pause on specified layers and swap filamen manually  &nbsp;Check out my recent yin yang project <a target="_blank" href="https://makerworld.com/en/models/210710#profileId-230551" rel="nofollow noopener">https://makerworld.com/en/models/210710#profileId-230551</a> in theme of bees.<figure class="image image_resized" style="width:16.03%;"><img src="https://makerworld.bblmw.com/makerworld/draft/704123/2024-02-28_c3c21720004fe.png"></figure>

Yin yang v2 huefofge

Hueforge

Spike_Mix

Dimensions:<ul><li>5 cm diameter</li><li>4 mm height</li><li>0.5 mm per level (8 levels)</li></ul>Print settings:<ul><li>Layer height: 0.1mm</li><li>Infill: 15%</li><li>For non multimaterial printers you&#39;ll need to pause the print every 5 layers (1 level if you keep the layer height at 0.1mm) and swap the filament</li><li>For multimaterial printers the 3mf file I uploaded has the color changes already set</li></ul>I used 3 colors, starting with a dark wine color, then white, and then a light pink.  -------------------------------------------------------------------------------------------------------------------------------------------------------------&nbsp;To legally sell PRINTED models, you may obtain my permission through this link: <a target="_blank" href="https://www.patreon.com/SpikeMix3D" rel="nofollow noopener">https://www.patreon.com/SpikeMix3D</a>

Floral multi color mandala earing

Jewlry

Bambu Lab

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013716/design/2023-09-25_28088e30b1c02.jpg"></figure>This 3D-printed mouse has a futuristic hollow shell design, revealing its internal structure. This generative design shell structure is possible only with 3D printing. Our industrial designer fully utilized the advantages of a 3D printed structure to present you with this magnificently artful mouse.&nbsp;Recommended filaments: Bambu PLA series<a target="_blank" href="https://store.bambulab.com/collections/bambu-lab-3d-printer-filament?gf_60645=279355719795" rel="nofollow noopener">https://store.bambulab.com/collections/bambu-lab-3d-printer-filament</a>If using PLA matte, metal, silk, please slowly screw in the bolt and avoid over-tightening to prevent structural damage.Print Setting: Print without support, v2.0 print profile recommendedHardware Kit: Wireless Mouse Components Kit-002<a target="_blank" href="http://store.bambulab.com/products/wireless-mouse-components-kit-002" rel="nofollow noopener">http://store.bambulab.com/products/wireless-mouse-components-kit-002</a>&nbsp;Please make sure you clean the build plate before printing and/or applying glue to prevent print failures.&nbsp;Follow the Assembly Guide or video tutorial below step by step to print and assemble your build. Refer to the Design Guide for further design and quality enhancement.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013716/design/2023-09-15_12b653452832c.png"></figure><figure class="media"><oembed url="https://www.youtube.com/watch?v=lkOg_X4qjW8"></oembed></figure>

Wireless Mouse 002

Computer

OJum

My new gun design, Ak-47 in its basic version with connector for assembly without glue.Connector hard: They hold well but are difficult to fit in.Connector light: They hold little but are easy to fit in. Practical if you want to align the parts to stick them.Size: 87cm

AK-47

Weapons

Ken Mills

Allow for the easy removal of AMS hub PTFE tubes without the need for tools or frustration. I've tried several PTFE release buttons, and none would stay in place reliably. This design features three evenly spaced clips to hold the buttons in place, regardless of their rotation. Works with both for P1 and X1series.&nbsp;To install, remove each PTFE tube, snap the buttons into the hub, and then reinstall the tubes.&nbsp;A version for the single tube filament buffer can be found here: <a target="_blank" href="https://makerworld.com/en/models/146073" rel="nofollow noopener">https://makerworld.com/en/models/146073</a>

AMS Hub Release Buttons for P1/X1

Bambu X1C Mods

Biťo1

VW Logo Lampe

Car Related

EPIQ3D

Make All your herbs easy in the kitchen.This planter ensures that your herbs stay fresh and hydrated.If you dont yourself use fresh herbs, i know this will be a great gift for those who do.&nbsp;<figure class="image image_resized" style="width:89.55%;"><img src="https://makerworld.bblmw.com/makerworld/draft/863886/2024-04-09_f6ffd46161a02.png"></figure>&nbsp;The Design is made to be as simple as possible, and blend into any kitchen aesthetic.There a two different patterns, because i could&#39;nt decide witch i liked best.So why not upload both of them :)&nbsp;<h3>HOW IT WORKS</h3>The self watering planter is designed to slowly absorb water from the reservoir (This needs to be filled up occasionally).Its a one piece print (uni body) with a clear and visible water reservoir, so you dont need to lift a inner pot, or rely on a floater to tell you how much water is left.&nbsp;Simply just look in the in the reservoir, and fill it up if needed.&nbsp;<figure class="image image_resized" style="width:88.82%;"><img src="https://makerworld.bblmw.com/makerworld/draft/863886/2024-04-09_d7e73f43dae5c.png"></figure>&nbsp;There are 3 water inlets to the center, where it is recommended to use a wicking material at the bottom.This helps to absorb water into the soil slowly. You can place a couple of cotton balls / cotton wool in the bottom of the pot.I recommend filling wicking material so it is above the reservoir edge, then fill with soil, and your herb of choice.&nbsp;<figure class="image image_resized" style="width:88.79%;"><img src="https://makerworld.bblmw.com/makerworld/draft/863886/2024-04-09_ec6f3714a17fa.png"></figure>The water inlets has a light slope towards the center, so all the water is utilized&nbsp;&nbsp;UPDATE - I have added a funnel, for making it easier to fill soil in the planter, without spilling soil in the water reservoir.&nbsp;<figure class="image image_resized" style="width:52.95%;"><img src="https://makerworld.bblmw.com/makerworld/draft/863886/2024-04-16_31e6442045a85.png"></figure>&nbsp;Basic print settings:<ul><li>Infill : 10%</li><li>Walls: 3</li><li>Top/bottom shell layers: 3</li><li>No support needed</li></ul>Dimensions: Soil area has a diameter of 80 mm, and a total hight of 108 mm.

Self watering Grail planter

Household

V3 Precision

This poop chute catches the waste filament as it drops from the Bambu Lab X1 printer. This is a larger sized container than my other design.The poop chute uses a two magnets (0.5 inch diameter, 0.10 thick). The mounting hole for the magnets are cut oversized (0.51 diameter) for an easy fit. Might need to super glue the magnets in place.The cutaway o n the size serves two functions. It gives you a recessed handle to grip the poop chute when taking it off. The angled top of the cutaway helps direct the waste filament across the chute. Helps to keep the filament from bunching up directly beneath.&nbsp;Filament - I used PLA+ or PLA Carbon FiberSupport - Yes; Hybrid, AutoLayer - 0.2mmInfill - 15%3mf file using Bambu Lab Studio (slicer)&nbsp;UPDATE:The design was updated to accommodate the feet added to the X1, X1C, P1P, and P1S.The new design is poop_shoot_L_magnetic_V2&nbsp;You can find a finished Poop Chute with the magnets on our website www.v3precision.com.

Poop Chute Large Magnetic for Bambu Lab X1

3D Printing

danielnc06

Phase 10 Deck Case remixed from the Uno Deck case. 2 Color. Requires 6 M3x30 screws. .16 layer heights looks good and 4 walls to help with strength.

Phase 10 Deck Case

Organizing

Max629

Ein simpler Remix von der Original Rugged Box (Parametric) von Whity. Für die Lagerung meiner ER11 Spannzangen.ich habe 6x M3x20 Schrauben verwendet.

Rugged Box für ER11 Spannzangen

Williams Industries

Here are the Horror knives I did awhile back. Adding them here to celebrate the awesomeness of Makerworld. Cheers.&nbsp;I have loads of stuff on my Patreon: https://www.patreon.com/WilliamsIndustries

Horror Knife Set of 6

Bolt3DDesign

"A sleek, 3D printed Karambit knife featuring a curved blade with a futuristic, geometric handle. Its intricate design showcases the precision of 3D printing technology, highlighting the marriage of traditional weapon aesthetics with modern manufacturing techniques."&nbsp;Custom Karambit KnifePause at a certain height to change the color&nbsp;*UPDATESorry new to MakerWorld but you will need:2-M4 18mm or 16mm Screws2-M4 Nuts