jake.vance

suit1337

The great idea of the dry brush add-on for The Army Painter palette got my attention - since i was not satisfied with the provided models, i came up with my own solution.There is some headspace under the lid of the palette, which is intended for the brushes - the existing models out there are basically flat at the bottom or give not enough headroom, so when your palette is full of brushes, you can't properly close it - my design solves this and respects the original headroom, so you can still fit in larger brushes in the brush tray i've also provided some blanks for those out there that just glue on some random leftovers from their models or want to glue in some materials like sand, cork, felt, leather etc. to have their own textures.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/158863/2023-11-10_f24fe082b9a67.png"></figure><h4>Printing </h4>i'm aware that the design requires supports - the underside does not need to be that pretty, just set your pattern spacing to about 5 mm and your top interface to about 1 mm - this does not cost much extra filament but does the trick<h4>Changelog</h4>2023-11-09 v21:<ul><li>initial release with some basic patterns and 2 blank variants</li></ul>

The Army Painter Wet Palette - Drybrush Insert

Warhammer

This is a simple stand for the signature tablet of a Square Register. We found that the default angle when it was layed on the counter to use as a signature pad was too flat for customers, so I designed a quick angled riser stand to prop it up on. This puts it at a much more usable angle, cuts down on screen glare, and solves a very specific problem. But hey, maybe you've had this issue too. It's got a notch cut out for the cord as well, and you can, of course, add some non-slip pads on the bottom if you need to.

Square Register Signature Tablet Stand

Useful Stuff

toothletmetoday

Get ready for Christmas with this simple Christmas tree fairy light holder. Easy to print. You can use what filament you want. Perfect fit with a cheap 2m/20led fairy light. You can hide the cables and the houseing of the flat battery in the base of the modell. &nbsp;I used this lights from amazon but you can find on aliexpress too. &nbsp;<a target="_blank" href="https://www.amazon.de/-/en/Waterproof-Decorations-Christmas-Weddings-Barbecues/dp/B0BKT562RQ/ref=pd_ci_mcx_mh_mcx_views_0?pd_rd_w=lxeOG&content-id=amzn1.sym.f81e69b0-8d25-4d0a-a0ba-d47e95a31f14%3Aamzn1.symc.ca948091-a64d-450e-86d7-c161ca33337b&pf_rd_p=f81e69b0-8d25-4d0a-a0ba-d47e95a31f14&pf_rd_r=X3T94G9298PNNKHRN3K6&pd_rd_wg=6uAvl&pd_rd_r=e5f120d1-c75a-4aa9-b927-d1b287b68e6c&pd_rd_i=B0BKT562RQ" rel="nofollow noopener">Amazon</a><a target="_blank" href="https://www.aliexpress.com/item/1005005284339594.html?spm=a2g0o.productlist.main.107.15521948KKWWJE&algo_pvid=95e5371c-674f-4829-8a4b-004fb06b3b69&algo_exp_id=95e5371c-674f-4829-8a4b-004fb06b3b69-53&pdp_npi=4%40dis%21USD%211.32%210.81%21%21%211.32%21%21%402101ea8c16982238877861349e3844%2112000032487576233%21sea%21HU%21172681489%21&curPageLogUid=5uesu0qD7LdR" rel="nofollow noopener">Aliexpress</a>&nbsp;If you want to print this modell, you can use my 3mf file. It has the correct orientation and position for the max size. I'll appriciate you if you use the bambu handy for starting your print.&nbsp;As a request, I made a star shape holder too. Maybe if you interested in, you can check it on the link. <a target="_blank" href="https://makerworld.com/hu/models/53070#profileId-54897" rel="nofollow noopener">link</a>&nbsp;--------------------------&nbsp;2023.11.01 edit…&nbsp;Some people requesting that, so I made a version with a bigger base where you can hide 2*AA or 3*AA battery boxes and the unnecessary wire of the light. I have a battery box wich has the switch on the top of the box not on the side, so i made a clearance for this type of boxes too. I made the hook a slightly bigger, so you can mount easily that rope type lights (what you can see on the picture) or you can use a longer light (3m long works very well too) becouse you have more space on the hook to mount the wires. The 3mf file contain the correct and i think the only orientation what you can use to printig in the biggest possible size on a bambulab printer. &nbsp;--------------------------&nbsp;2023.11.03&nbsp;For request i added for the 3*AA battery box the wire channel to the base front and i adjusted the orientation the modell because the X1 users can have issue with the starting routine goes into the modell's first layer.&nbsp;Thanks!

Christmas tree with fairy light

Christmas

JDJDJD

<h2><img src="https://makerworld.bblmw.com/makerworld/draft/693332/2023-10-20_f597d805fa3e9.gif"></h2>The TopProp is very stable and thoughtfully designed to prop your glass lid open for venting.&nbsp;Venting is recommended by Bambu Lab in many situations, for example when using PLA on the Textured PEI plate and Smooth PEI plate.&nbsp;The TopProp provides 30 inches of venting across the top of your machine.&nbsp;Featuring a stylish design with the perfect angles for supporting your glass top, TopProp also includes a handy magnetized hanger making use easy, quick and enjoyable.&nbsp;<ul><li>No Brims</li><li>No Overhangs</li><li>No Supports</li></ul><h3> </h3><h3>Magnets:</h3>Magnets can be easily pressed into place. Several magnet diameters are supported and can be up to 7mm in height.&nbsp;<ul><li>10mm diameter magnets</li><li>8mm diameter magnets</li><li>6mm diameter magnets</li></ul>&nbsp;<h3>Print Orientation Requirements:</h3><ul><li>TopProp: Side on bed</li><li>TopProp Hanger: Large flat side on bed</li></ul>&nbsp;<h3>Tips:</h3><ul><li>The side of the machine has some internal metal components that work with the magnets. The best locations on the sides are near the front and back corners (see image examples). However, if you want your TopProp even more secure you can simply use a small loop of gift wrapping tape on the backside of the hanger in conjunction with the magnets. It’s best to install the tape with the open ends of the looped tape facing up and down (vs side to side). This prevents the tape from rolling.</li><li>Magnets can be stacked up to 7mm in height for added strength.</li><li>I don't set my AMS on top of my machine, instead I use a shelf above my printer. Extra weight on top raises the center of gravity and can create a swaying effect. As such, this is designed around no AMS on top. It's also possible to print two TopProps and use them on the right and left corners - they fit there, too.</li></ul>

TopProp - Lid Lifter Vent For Glass Top

Printer Add-Ons

MottN.

This is Amsy - he's friendly as long as you feed him lots of filament!&nbsp;Eyes are meant to be printed with supports as oriented in the profile to minimize color changes. The print profile has the teeth on the same plate as the eyes - move to their own plate if you want to save ~20 mins and a few extra filament changes. One of the eye ‘sockets’ need to be mirrored if you just use the raw model files to plate your own, they are meant to be left/right versions. &nbsp;Attach eyes and teeth to the AMS unit with some double stick tape. Teeth attach to gums with the same tape or superglue.

Warhammer

Useful Stuff

Christmas

Printer Add-Ons

Fun Stuff