#Print Settings If anybody would like it, here is an instant startup G-code to replace the start G-code in the printer settings (Bambu Studio) if the user has an external filament spool currently loaded: G90 ;abs pos M83 ;turn on steppers M140 S[bed_temperature_initial_layer_single] ;set bed temp M190 S[bed_temperature_initial_layer_single] ;wait for bed temp G28 ;home all axes G28 X128 Y128 Z5 ;home all axes again (z axis tends to fail) and set to default pos G0 X30 Y20 F12000 G1 Z0.2 F1200 M109 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time G1 X150 E12