erelio_brolis

Nivenante

This Bottle-Holder is for 0,5L NRW Beer-Bottles (check the pictures) with a diameter of ~70mm and a height of ~260mm. It's the type of bottle that's mainly used in Austria, Germany and Swiss. It should stop them from rolling around inside your fridges. I also strongly recommend the suction pads, as they stop the Bottle-Holder from sliding around. :) I made the files from scratch with Fusion360 but I have been inspired by Arne S. (https://www.printables.com/de/model/210593-beer-bottle-holder-for-the-fridge-different-bottle)&nbsp;----------------------------------------------------------------------------------------------------------------If you want to help me out a bit and see some stuff I made, work in progress, or models before they will be here consider liking and following <a href="https://www.facebook.com/profile.php?id=100090787891660" rel="nofollow">my Facebook page</a>, thank you very much - it means a lot to me! :)----------------------------------------------------------------------------------------------------------------&nbsp;<ul><li>Print with:<ul><li>PLA</li><li>3 wall loops and top/bottom shell layers</li><li>5% infill</li><li>no supports are needed for any part</li><li>no brim needed for any part</li><li>use slow speed - else the nozzle may push against the beams</li></ul></li></ul>&nbsp;<ul><li>Parts:<ul><li>NRW_Bottle_Holder_Modular_3X<ul><li>A row of three spaces for your bottles</li><li>~150g filament</li><li>213x73x151mm</li></ul></li><li>NRW_Bottle_Holder_Modular_1X<ul><li>A space for your bottle</li><li>~50g filament</li><li>73x73x151mm</li></ul></li><li>NRW_Bottle_Holder_Modular_Bolts<ul><li>4 printable bolts, for one side.</li><li>~5g filament per set</li><li>5x5x10mm</li></ul></li><li>NRW_Bottle_Holder_Modular_Suction<ul><li>4 printable bolts, to attach suction pads.</li><li>~5g filament</li><li>Made for usage with the 20mm ones found here: <a href="https://amzn.to/3DOw9o5" rel="nofollow">Suction Pads @Amazon EU</a> This is my Amazon ref-link, won't make a difference for you, but helps me :)</li></ul></li></ul></li></ul>&nbsp;<ul><li>Six Pack:<ul><li>2 times NRW_Bottle_Holder_Modular_3X</li><li>3 times NRW_Bottle_Holder_Modular_Bolts</li><li>Some glue may be needed</li><li>~300g filament</li><li>optional suction pad adapters are available</li></ul></li></ul>&nbsp;<ul><li>Updates:<ul><li>none so far</li></ul></li></ul>----------------------------------------------------------------------------------------------------------------I'm looking forward to your comments and makes. :)

Modular Bottle Holder for Fridges with suction pads

Home

BrennaPrints

Hello!&nbsp;My wife and I were scouring the internet for a shark fin croc charm to no luck! So, we decided to take a shot at making our own. This is our first ever creation so we are excited to see what improvements others can make! &nbsp;Fits wonderfully into a croc, the size is already matched to fit seamlessly into a croc hole (8mm) so highly suggest not altering the size, everything else seems be fair game!&nbsp;This does included a tree support as there are “hanging sections” but it comes off easily! no gluing necessary as this is one solo piece

Shark Fin Croc Charm

crocs

elikoll

You have to put the ring inside the head so it fits always perfect.Show me your finished print results.

Batman Hitch Ball Cover Car Trailer

krypto.customdesigns

About this Upload&nbsp;I´ve done this upload to combine the most usefull things arround the Stealth Press Project from <a target="_blank" href="https://makerworld.com/en/u/1939759783" rel="nofollow noopener">Iconic FAB</a>.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Things i´ve included in this Package are the following Mods:&nbsp;Stealth Press Drawer Mod from <a target="_blank" href="https://www.printables.com/de/@3DPMAMSIH" rel="nofollow noopener">3DP-MAMSIH@3DPMAMSIH</a>Stealth Press Keybak Replacemet Doorpuller from <a target="_blank" href="https://www.printables.com/de/@thomasfjen_222021" rel="nofollow noopener">thomasfjen@thomasfjen_222021</a>Stealth Press Handle from <a target="_blank" href="https://www.printables.com/de/@radicalreel" rel="nofollow noopener">radicalreel@radicalreel</a>&nbsp;The Main-Build Process is covered by the Video from Iconic Fab:<figure class="media"><div data-oembed-url="https://youtu.be/TIkG8giLG9g?si=jvzNHbF67oJ-YWCt"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/TIkG8giLG9g" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;<figure class="table"><table><thead><tr><th>Mechanical parts</th><th style="width:50px;">QTY</th></tr></thead><tbody><tr><td>M3x8 SHCS — Bolts (Source: <a target="_blank" href="https://s.click.aliexpress.com/e/_DD5xFM1" rel="nofollow noopener">INT</a>)</td><td style="width:50px;">40</td></tr><tr><td>M5x25 SCHS — Bolts (Sources: <a target="_blank" href="https://s.click.aliexpress.com/e/_Dne9xOV" rel="nofollow noopener">INT</a>)</td><td style="width:50px;">2</td></tr><tr><td>F695-2RS — Bearings (F = Flanged) (Source: <a target="_blank" href="https://s.click.aliexpress.com/e/_DBulKpf" rel="nofollow noopener">INT</a>)</td><td style="width:50px;">4</td></tr><tr><td>M3 — Threaded Inserts — M3x5x4 (M3 x (OD)5 x (L)4 —VORON) (Source: <a target="_blank" href="https://s.click.aliexpress.com/e/_DFtU96d" rel="nofollow noopener">INT</a>)</td><td style="width:50px;">30</td></tr><tr><td>MGN12H — Linear Rail — 300mm — Black (Source: <a target="_blank" href="https://s.click.aliexpress.com/e/_Dd5YJTr" rel="nofollow noopener">INT</a>) or SS (Source: <a target="_blank" href="https://s.click.aliexpress.com/e/_DeKhmdr" rel="nofollow noopener">INT</a>)</td><td style="width:50px;">1</td></tr><tr><td>KEY-BAK — Super48 36" 13oz (Source: <a target="_blank" href="https://www.amazon.com/KEY-BAK-Retractable-Keychain-Polycarbonate-Oversized/dp/B0088MQA10/ref=sr_1_1?crid=11NSAAWHG3GP6&keywords=key-bak%2Bsuper48%2B36%22%2B13oz&qid=1704371600&sprefix=KEY-BAK%2B%E2%80%94%2BSuper48%2B36%22%2B13oz%2Caps%2C409&sr=8-1&th=1" rel="nofollow noopener">INT</a>)</td><td style="width:50px;">1</td></tr></tbody></table></figure><figure class="table"><table><thead><tr><th colspan="2">Printed Parts</th></tr><tr><th colspan="2">The most current revision is R1.1 - check the change log below!</th></tr></thead><tbody><tr><td>Printed parts</td><td style="width:50px;">16</td></tr></tbody></table></figure><figure class="table"><table><thead><tr><th colspan="2">Soldering iron-related parts</th></tr><tr><th colspan="2">Heat-set insert tips vary for the type of soldering iron used!</th></tr></thead><tbody><tr><td>Soldering iron (<a target="_blank" href="https://s.click.aliexpress.com/e/_DdzrJd3" rel="nofollow noopener">Generic</a>, <a target="_blank" href="https://s.click.aliexpress.com/e/_DBwFzCh" rel="nofollow noopener">TS100/101</a> or <a target="_blank" href="https://s.click.aliexpress.com/e/_DdcI3Lr" rel="nofollow noopener">Pinecil</a>)</td><td style="width:50px;">1</td></tr><tr><td>Soldering Adapter for heat-set inserts (Source: <a target="_blank" href="https://cnckitchen.store/collections/soldering-tips-and-sets" rel="nofollow noopener">INT</a>)</td><td style="width:50px;">1</td></tr></tbody></table></figure><h2>ASSEMBLY MANUAL</h2><a target="_blank" href="https://files.printables.com/media/prints/609644/other_files/4843265_e59cfc31-fcd8-4017-8f65-f14361245270_7bd9886b-26d0-468e-92d9-ef99138e9d90/stealth_press_assembly_manual_rev10-20231010_iconic-fabcom.pdf" rel="nofollow noopener">Download the full assembly manual with visuals and a step-by-step guide</a>.&nbsp;<h4>BOM for the Drawer MOD + the original design </h4><ul><li>4x magnets of 3X6mm for the Drawer</li><li>3x M3 Heat inserts (2x for the Extension base , 1x for the Handle )</li><li>2x M3x10mm screws ( 2x for the Extension base )</li><li>1x M3x25mm ( for the Handle )</li></ul><h4>Print setting </h4><ul><li>like the original one no change </li><li>no support needed</li></ul><h4>Parts Needed for this ( not included the original parts for complete the <a target="_blank" href="https://www.printables.com/fr/model/609644-stealth-press-heat-set-insert-press" rel="nofollow noopener">Build</a>)</h4><ul><li>Main_Core_Part</li></ul><figure class="image image_resized image-style-align-right" style="width:42.17%;"><img src="https://media.printables.com/media/prints/707964/rich_content/e244fdeb-5783-45b4-a5db-347e12851ba3/thumbs/cover/800x660/png/capture-decran-2024-01-06-154938.webp"></figure><ul><li>Build-plate-main</li><li>Build-Plate_extension</li><li>Handle</li><li>Drawer_front_x1</li><li>Drawer_Base_x1</li></ul>&nbsp;<h3> </h3><h3> </h3><h3> </h3><h3> </h3><h3>Optional Parts, printed them by myself and they will work also!</h3><ul><li>Main_core_Light_version</li><li>front_drawer_light_v</li></ul><h4> </h4><figure class="image image_resized image-style-align-right" style="width:75%;"><img src="https://media.printables.com/media/prints/707964/rich_content/0cbc78f3-6ce4-4b2a-b273-d3d7ba437d74/thumbs/cover/800x642/png/capture-decran-2024-01-06-174707.webp"></figure>&nbsp;&nbsp;&nbsp;<h4> </h4>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;The Handle-Mod on Top is an easy swap out of the original printfiles, so no more Informations are needed.&nbsp;I hope you like the Idea behind this Collection.&nbsp;The Credits goes to the marked Designers above!Thanks for sharing your awesome work!

Stealth Press + the most usefull Mods

WORK Bench (office)

v1 Lowrider

duck.knapp

I&#39;ve wanted to build an insert press for a long time. then I looked for something that I didn&#39;t have to buy extra parts for and was &#34;good enough&#34;, but again I didn&#39;t find anything...&nbsp;&nbsp;so I developed my own press. You can print everything except 6x 608 zz ball bearings which you have to press in.&nbsp;&nbsp;For assembly you need: - First the 6 bearings are pressed in - join your arms - arms to the headpiece - arms with headpiece to the base&nbsp;&nbsp;It is important to ensure that everything is printed very precisely and does not wobble too much. It&#39;s better to be slightly too tight and grease it than to be too loose. The pins for tapping in should be tested beforehand. They are designed so that they have to be shuttered, but the material should not split apart.&nbsp;It&#39;s not an easy print but I think it&#39;s cool XD&nbsp;Material: PETG, ABS, Nylon or so&nbsp;btw: In the pictures you can see the old arms, now they are different lengthsand as always if you think of something that I can change/improve, please let me know

Heat Set Insert Press (99% 3D-Printed)

Work shop

BamBam Design

Knurled handle for Socket Head Cap Screw with hexagon socket (Zylinderkopfschraube mit Innensechskant)<ul><li>Fits perfect ISO 4762 / DIN 912 Screws</li><li>Good little handle for little force</li><li>For M3, M4, M5, M6 and M8</li><li>Add a bit of glue to secure or use it as a tool</li></ul>Check out the perfect match nut handle design: <a target="_blank" href="https://makerworld.com/models/74918" rel="nofollow noopener">https://makerworld.com/models/74918</a><a target="_blank" href="https://makerworld.com/models/74918" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/770443/2023-11-26_2882214a3f319.png"></a>&nbsp;Commercial license you can get here:<a target="_blank" href="https://www.patreon.com/BamBamDesign/membership" rel="nofollow noopener">https://www.patreon.com/BamBamDesign/membership</a>

Knurled handle - M3 to M8 Socket Head Cap Screw 

Mechanical design

ThemeParkBoy

Elevate your Crocs game with "The Rock Croc Charm," a rugged and charismatic addition to your footwear accessories. Inspired by the strength and resilience of nature, this 3D model captures the essence of rocky terrain in a compact charm designed to embellish your Crocs.&nbsp;Crafted with meticulous attention to detail, The Rock Croc Charm features intricate textures and rugged contours, reminiscent of weathered stone formations. Its dynamic design adds a touch of rugged sophistication to your Crocs, infusing them with an adventurous spirit.&nbsp;Whether you're a nature enthusiast, outdoor adventurer, or simply appreciate the beauty of natural landscapes, The Rock Croc Charm is the perfect accessory to express your unique style. Attach it to your Crocs and let its rugged charm accompany you on your daily journeys, reminding you of the strength and resilience within.&nbsp;Printed with precision in durable materials, The Rock Croc Charm ensures longevity and durability, allowing you to venture forth with confidence, knowing your accessory can withstand the elements. Embrace the rugged allure of nature with The Rock Croc Charm – because every step is a journey worth celebrating.&nbsp;&nbsp;

The Rock Croc Charm

Rock world

Art Design. 3D

Hallo there,&nbsp;My new tissue box / box in wood art Design is here. Additionally, it can also be used as a large storage box.&nbsp;If you like the model, I would appreciate it if you could take the time to like, follow, or boost it. That helps me continue to create great models for you. Thank you very much in advance.&nbsp;Thanks to its wooden design, it fits perfectly in any room. Of course, you can also choose other colors for a stylish exterior.&nbsp;In my two printing profiles, you will find the tissue box in the first one, and in the second one, the lid as well as the required spacers.For the lid, only one screw is needed to attach the handle.&nbsp;The inner dimensions of the box are:&nbsp;100-sheet box: L 230.5mm x W 118.5mm x H 49mm150-sheet box: L 230.5mm x W 118.5mm x H 60mm200-sheet box: L 230.5mm x W 118.5mm x H 85mm&#34;&nbsp;(Please leave a like and follow if you enjoy the content, it would greatly help me)&nbsp;For more designs check out my<a target="_blank" href="https://makerworld.com/en/@BigKev" rel="nofollow noopener"> !!!COLLECTION!!!</a>&nbsp;If you like my work and want to support me you can buy me a coffee <a target="_blank" href="https://www.buymeacoffee.com/big_kev3d" rel="nofollow noopener">HERE</a>If you have any special requirements and need it personalized: just hit me up, I´ll try my best to design it for you.&nbsp;Happy printing!

Wood Art Tissue / Big Box

Next PRINT

哔哔叭叭蹦蹦蹦

需要：M2*6 螺丝29mm涡轮涵道电机30A电调18650电池tapeC 充电板Required:M2 * 6 screw29mm turbine duct motor30A electrical regulation18650 batteryTapeC charging motherboard

Violent handheld fan

DC motors 5v

Adam L

This is yet-another-calibration tower, with several tests for overhang/bridge performance, but also other tiny features that I think represent common use cases in detailed 3D printing.One of the things the Bambu X1/X1C/P1P printers cannot do for you is calibrate fan speeds for different filaments auto-magically. Temperature and cooling, along with flow and pressure advance is important to do for good printing performance, particularly for overhangs & bridging performance, as well as stringing.This model tests curved, straight, and thin overhangs in different orientations and by repeatedly printing a model at different heights. I have pre-sliced Fan and Temperature 3MF files for you, but you can “Scan” any printing variable you wish at 10 mm intervals. This model tries the most challenging types of curved overhangs, up to 90%, as well as bridges (100% overhang). It also prints several tiny features to make sure you don't accidentally over-optimize for one area of performance at the cost of another. <h3>Which file should I use?</h3>Bambu/SoftFever Users : (other slicers see below)Note: These files assume you are using an X1C (machine I tested on). If you are using a X1 or P1P or other machine, you will need to copy/paste the custom before-layer-change code into a copy of your machine's profile and save a copy and then slice. See the temperature instructions below for where to find this.<ul><li>Temperature : 5xTempScan.3MF (This file does 5 different temps)</li><li>Fan Speed: 10xFanScan.3MF (This file scans 10 different speeds)</li></ul>If you use another slicer or want different sizes, STEP & STL files are included for 10x,5x,1x and separate base and repeating unit.<h3>Important Instructions:</h3>It is very important to make sure you're scanning the variable you think you are by checking in the slicer preview (temperature or fan speed view). Additionally, my files have a preset for Overture PETG by default setup. Make sure to change it to your filament of choice!<ul><li>For fan-scanning it is very important to change your filament cooling settings temporarily to not conflict with the machine “before-layer-change” overrides that have been setup for you in the 3MF files! Simply change your filament settings to specify no cooling for the first 1000 layers to prevent issues:<img src="https://media.printables.com/media/prints/366923/rich_content/7c30eb2f-215d-40f5-a9b8-f33c1422ce7d/image.png#%7B%22uuid%22%3A%22a0adba3d-26a2-4ef2-9c0c-58fe0fbb40e9%22%2C%22w%22%3A483%2C%22h%22%3A192%7D"></li></ul>&nbsp;<ul><li>For temperature scanning you will need to go into the machine GCODE settings and set the temperatures you want to scan. Click here to open the dialog, and then find the Before Layer Change G-Code dialog and modify the temperatures you want to scan, along with your starting temperature (see other-slicer instructions):</li></ul><img src="https://media.printables.com/media/prints/366923/rich_content/96879c10-0de8-4dfb-b9a0-68be29a72d75/image.png#%7B%22uuid%22%3A%22bda48a94-9eb2-45df-84a7-5aaaa48435ec%22%2C%22w%22%3A536%2C%22h%22%3A124%7D">Then change the yellow highlighted values:<img src="https://media.printables.com/media/prints/366923/rich_content/d9a1de9c-6617-4bd0-8b23-46a41434b880/image.png#%7B%22uuid%22%3A%224ab758ee-a8fc-45a6-a2b2-33d527c7fb2d%22%2C%22w%22%3A744%2C%22h%22%3A288%7D">&nbsp;PrusaSlicer / SuperSlicer / Other Users:<ul><li>I've provided the STL & STEP files for you folks. You'll need to configure your slicer to scan the variable you want by adding the appropriate “Before Layer Change G-Code” in your slicer. Here's copy-paste templates for 5x Temperature and 10x Fan towers: </li></ul>Example Temperature code:<code>{if layer_z<2.0}M104 S285 ; Temp Tower starting temp</code> <code>{elsif layer_z<=12.0} M104 S285 ; Temp Tower Temp #1</code> <code>{elsif layer_z<=22.0} M104 S280 ; Temp Tower Temp #2</code> <code>{elsif layer_z<=32.0} M104 S275 ; Temp Tower Temp #3</code> <code>{elsif layer_z<=42.0} M104 S270 ; Temp Tower Temp #4</code> <code>{elsif layer_z<=52.0} M104 S265 ; Temp Tower Temp #5</code> <code>{endif}</code>Example Fan Code:<code>{if layer_z<2.0}M106 S0 ; FanTest floor 1 (no fan)</code> <code>{elsif layer_z<=12.0} M106 S26 ; FanTest floor 2 (10% fan)</code> <code>{elsif layer_z<=22.0} M106 S51 ; FanTest floor 3 (20% fan)</code> <code>{elsif layer_z<=32.0} M106 S77 ; FanTest floor 4 (30% fan)</code> <code>{elsif layer_z<=42.0} M106 S102 ; FanTest floor 5 (40% fan)</code> <code>{elsif layer_z<=52.0} M106 S128 ; FanTest floor 6 (50% fan)</code> <code>{elsif layer_z<=62.0} M106 S153 ; FanTest floor 7 (60% fan)</code> <code>{elsif layer_z<=72.0} M106 S179 ; FanTest floor 8 (70% fan)</code> <code>{elsif layer_z<=82.0} M106 S204 ; FanTest floor 9 (80% fan)</code> <code>{elsif layer_z<=92.0} M106 S230 ; FanTest floor 10 (90% fan)</code> <code>{elsif layer_z<=102.0} M106 S255 ; FanTest floor 11 (100% fan)</code> <code>{endif}</code>&nbsp;Other Printing Details<ul><li>Filament Print Temperature: Any filament will work for temperature scanning. I recommend using default fan settings for that filament type when scanning temperatures to get a good guess at which temperature is ideal.</li><li>Filament Fan Speeds: This test variant is particularly useful on filaments that need to balance strength or warping with detail and quality. Typical examples include PETG, Nylon, ABS, etc. </li><li>Layer height: Typically 0.20 or 0.16 mm. The 3MF files provided are the faster 0.2 mm prints, but are easily changed by adjusting the layer height in the slicer. 0.2 mm is also more challenging and may help accentuate temp/cooling differences. However, you should use whatever layer height you use the most frequently.</li><li>Nozzle size: This test assumes you are using a standard 0.4 mm nozzle, but in theory can work with any nozzle with some adjustments.</li></ul>Why did I make it this way ?I adapted this model from the thingiverse model <a href="https://www.thingiverse.com/thing:2003594/files" rel="nofollow">here </a>, but made several modifications to really push the printer hard to accentuate differences between different settings. These included adding several new features and adjusting the overhangs to be longer and more aggressive in various different ways.Which printers does this work with ?Any printer! However, the 3MF files contain BambuSlicer settings to make people's lives easier who use that slicer. This was sliced with<a href="https://github.com/SoftFever/BambuStudio-SoftFever" rel="nofollow"> SoftFever's fork </a>(v1.4.2) of the official BambuSlicer, but it is also drop-in compatible with the official slicer. Works fine also with PrusaSlicer, but you'll need to do your own “before layer change” setups for fan/temperature.

Scan Tower : Calibrate a Filament's Fan & Temperature Settings (Bambu X1/X1C/P1P or any printer)

Calibration models

KYZ Design

Modular TPU inserts for <a target="_blank" href="https://makerworld.com/en/models/35998" rel="nofollow noopener">these Gridfinity bins</a>. I've tried the fitment on a standard 3 unit high bin and that's fine also.&nbsp;Stop your tools from rolling around and make your bins truly modular.&nbsp;More shapes on the way!&nbsp;Additional print profiles are welcome (no need to forward me your profile points).&nbsp;Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/26498" rel="nofollow noopener">this collection</a> for my other Gridfinity models andcheck out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my Honeycomb Storage Wall models.&nbsp;

Round Tool Holding Inserts for Gridfinity Bins

Gridfinity

baris.ayarkan

who doesn't need a pile of skills ? :-)

Pile of Skull

Skull's

YeetYeet

Break action rocket launcher that shoots rockets propelled by co2 cartridges. Rockets are held in reusable shells and upon firing, they deploy stabilization fins thanks to rubber bands. The rockets use 12g co2 cartridges which are often used for airsoft. That makes them quite affordable and available in any airsoft store. Launcher features picatinny rails on top and bottom of the barrel, making it possible to mount accessories like scope or laser. For more information and assembly guide see assembly.pdf in files.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=DbaiUHjH5wk"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/DbaiUHjH5wk" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure> BOM:<ul><li>M3x8 7pcs</li><li>M3x60 2pcs</li><li>M3x35 2pcs</li><li>M3x25 1pc</li><li>M3x22 1pc</li><li>M4x25 1pc</li><li>M4x22 1pc</li><li>M4x10 4pcs</li><li>M4 nut</li><li>Springs 5,5mm OD, length at least 30mm (<a target="_blank" href="https://www.hornbach.cz/p/pruzina-tlacna-5-5x38-zinek-bily-baleni-8-ks/6488171/" rel="nofollow noopener">Springs from HORNBACH</a>)</li><li>Torsion spring - wire diameter: ~2.5mm, inner hole diameter: 8mm, outer diameter: 13.5mm, height: ~13mm (I got mine from <a target="_blank" href="https://www.globus.cz/cela-nabidka/produkt-01012794000" rel="nofollow noopener">this clamp</a>)</li><li>Nail 2.8mm x 40 (<a target="_blank" href="https://www.hornbach.cz/p/hrebik-do-krytiny-2-8x40-bez-pu-2-5-kg/8718694/" rel="nofollow noopener">HORNBACH link</a>)</li><li>12gram non threaded co2 cartridges</li><li>rubber bands  </li></ul>For additional types of rockets or if you want to create your own see <a target="_blank" href="https://www.printables.com/model/766344-co2-rockets" rel="nofollow noopener">Co2 rockets</a> (<a target="_blank" href="https://makerworld.com/en/models/188133" rel="nofollow noopener">Makerworld link</a>) In the files section you can find honing tool. This is not needed but can be used to smoothen the inside of the barrel. Simply glue sandpaper to it and insert 8mm tube into the center. Mount it onto a drill and use it to smoothen the barrel. UPDATE: Added shorter 167mm barrel so it can be printed on prusa mini or A1 mini. Thanks to <a target="_blank" href="https://makerworld.com/en/u/335516679" rel="nofollow noopener">@Ice_Maniac</a>, who found the correct set of springs and clamps on amazon: <a target="_blank" href="https://www.amazon.co.uk/dp/B0BWY3TY1K?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">Clamps from amazon</a> <a target="_blank" href="https://www.amazon.co.uk/dp/B00W93X2IS?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">Springs from amazon</a>

Co2 rocket/grenade launcher

guns

e3simon920

I created a modern Lampshade with multiple colors. It is easy to print. I used contrasting colors of an opaque white and transparent teal blue. The lamp I used can be found at the link below.&nbsp;Lamp: <a target="_blank" href="https://www.target.com/p/torchiere-floor-lamp-room-essentials/-/A-87922467?preselect=87337336#lnk=sametab" rel="nofollow noopener">https://www.target.com/p/torchiere-floor-lamp-room-essentials/-/A-87922467?preselect=87337336#lnk=sametab</a>

Multi-Color Modern Lampshade

Light's

h3li0

stackable storage box with japanese influence created in fusion 360&nbsp;photos show printed in matte black pla and brick red petg-cf<ul><li>0.16mm layer height</li><li>20% adaptive cubic infill</li><li>no brims or supports</li></ul>the top section (in brick red) has different geometry and cannot be added in any other order, the remainder ones can interchange order&nbsp;3mf includes two plates one with the main compartments and the other with the top compartment/lid&nbsp;in my opinion this model pairs very well with my new <a target="_blank" href="https://makerworld.com/en/models/177272#profileId-194948" rel="nofollow noopener">desk organiser</a>, as you can see on the photos&nbsp;update &gt; check out the companion <a target="_blank" href="https://makerworld.com/en/models/187782#profileId-206895" rel="nofollow noopener">squared version</a> now published&nbsp;If you enjoy using this 3D model and are able to, please consider supporting my work by <a target="_blank" href="https://www.buymeacoffee.com/h3li0" rel="nofollow noopener">buying me a coffee</a>. Your contribution goes a long way in fueling future creations. Thank you for being a supporter!&nbsp;note: all photos uploaded are of the actual printed model, taken inside a lightbox or in natural light on top of a desk / table

stackable storage box with japanese influence

Storage BOX's

designs.by.Marcum

Never miss a day of medicine or vitamins with this Weekly Pill Box with a Sliding, Locking, Dovetail Lid!&nbsp;Each part of this Pill Box was carefully considered to hold the maximum amount of pills while maintaining a sleek and stylish design. Each indent features a rounded bottom for easy removal of pills.&nbsp;Both the lids and the boxes feature holes to accommodate a 10mm by 3mm magnet to assist with keeping the pill box locked during transit, but can be used without it. The magnet can be press fit into place, but may require glue depending on printer tolerances.&nbsp;Features<ul><li>Sliding dovetail lid, with magnetic locking system</li><li>Several options to suit your needs and style</li><li>Deep indents for pills with rounded bottom for easy removal</li><li>Days of the week marked above each indentation - options for Sunday to Saturday and Monday to Sunday and SIX languages</li><li>Indication arrow on lid to easily show which direction the box opens</li><li>Easy print with carefully considered setting changes to provide best overall quality</li></ul>SizeRegular Box<ul><li>Box - 200mm long x 60mm wide x 24mm tall</li><li>Indents - 24mm long x 40mm wide x 15mm deep</li></ul>Morning / Evening Box<ul><li>Box - 200mm long x 70mm wide x 24mm tall</li><li>Indents - 24mm long x 24mm wide x 15mm deep</li></ul>If you&#39;d like access to a Commercial License and exclusive designs not available anywhere else:<a href="patreon.com/designsbyMarcum" rel="nofollow">Join me on Patreon</a>&nbsp;Check out my latest upload on my profile, <a target="_blank" href="https://makerworld.com/en/models/199263#profileId-219789" rel="nofollow noopener">Dog Kit Cards - Multiple Breeds</a>! Below is a taste of  the different breeds, but there are much, much more!<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000171880/design/2024-04-28_e16b2a94f93e9.jpg">&nbsp;Filament used in product photography:<ul><li>Overture Matte PLA - Black</li><li>Overture Matte PLA - Jeans Blue</li><li>Overture Matte PLA - Wood</li><li>Overture Matte PLA - Red</li><li>Overture Matte PLA - Light Gray</li><li>Overture Cream PLA - Purple</li><li>Inland PLA - Marble White</li><li>Inland Silk PLA - Gold-Silver</li></ul>

Weekly Pill Box with Sliding Lid - Multiple Styles

cool stuff

Saber3D

*Light Fury not included*&nbsp;Check all my models out at <a target="_blank" href="https://saber-3d.com/" rel="nofollow noopener">www.Saber-3D.com</a> &nbsp;Follow our socials to see new models! &nbsp;<a target="_blank" href="https://www.instagram.com/saber.3d" rel="nofollow noopener">https://www.instagram.com/saber.3d</a><a target="_blank" href="https://www.tiktok.com/@saber3d" rel="nofollow noopener">https://www.tiktok.com/@saber3d</a> &nbsp;Flexi Toothless can Stand, Sit, and Flap Its Wings!&nbsp;It is a great print for those who love to fidget. It does not require supports and prints well in PLA.&nbsp;No Supports necessary!&nbsp;Not all filaments are created equal, If your having issues with wing joints, I suggest increasing or decreasing wing size by 1% until you have the desired fit.&nbsp;For personal non-commercial use only. Please do NOT redistribute the files to anyone else.&nbsp;Want to sell prints or just enjoy the instant access to all my models? join our All Access tier on <a target="_blank" href="https://www.patreon.com/Saber3D" rel="nofollow noopener">Patreon</a>. &nbsp;We really appreciate your support!&nbsp;Please share images of your prints, we love to see them!

Flexi Toothless Dragon (3MF Multi-color)

Rojus

AU3D

This is an upgraded tray/shelf for IKEA Skadis, enhanced with custom-designed hooks crafted with minimal tolerances to ensure an exceptionally snug and secure fit. Except from removing the supports which takes about 5 seconds per shelf, these shelves do not need any post processing or glueing. There are 11 sizes ranging from 60mm to 260mm in width. Tray height: 25mm. Tray depth: 60mm<h3>Updates</h3>18.01.2024: Added trays for the 60-120mm range.<h3>Skadis Collection</h3>I am constantly developing more IKEA Skadis attachments. Check out my<a target="_blank" href="https://makerworld.com/en/u/2942852598/collections/453266" rel="nofollow noopener">IKEA Skadis Shelves, Trays and Container</a><a target="_blank" href="https://makerworld.com/en/u/2942852598/collections/188108" rel="nofollow noopener">General IKEA Skadis Collection</a>

IKEA Skadis Container D60 H25

IKEA skadis

Chris1974

EDITI redesigned the grippers on the Chopsticks to get even better hold of your fforite snacks!END EDIT&nbsp;So you are on your computer or phone. So busy but you have to snack!!! Can't snack because you will get dirty fingers!!!What to do!!!!!&nbsp;I have solved this important issue for you in about 20 minutes!&nbsp;Use these finger chopsticks that rest between your fingers, allowing you to do your important work while also being able to pick up snacks and food without getting dirty fingers!!!&nbsp;Comes in sizes S, M and L but you can scale them to fit your hands if you need.&nbsp;Now you can keep on gaming forever! I mean working off course…

Gaming Chopsticks

Gifts for friends

Willi 3D

<h3>Create your BaBo organizer! A system created to store them all!</h3>&nbsp;<h4>Description:</h4>This is the BaBo drawer module 60.<figure class="image image_resized" style="width:48.16%;"><img src="https://makerworld.bblmw.com/makerworld/draft/568427/2023-10-22_8to6a8r5fqnp.jpg"></figure>&nbsp;The usable dimensions of the drawer are 240x210x60.The drawer has space for 8x7 inserts.The inserts have a grid of 30x30mm, this means a 1x2 insert has the dimensions 30x60mm.<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/568427/2023-10-22_jl2c2dqx1rzq.jpg"></figure>BaBo organizer is a stationary, very flexible system to store your tools, spare parts and even printing plates. The design is based on the iconic look of the Bambu Lab X1 printer. The entire system uses only 1 type of screw, M3x8 countersunk screws.&nbsp;Links:<ul><li><a target="_blank" href="https://makerworld.com/de/u/24485025/collections/12914" rel="nofollow noopener">BaBo collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/24485025/collections/666853" rel="nofollow noopener">BaBo duo collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/24485025/collections/666866" rel="nofollow noopener">BaBo inserts</a></li><li><a target="_blank" href="https://www.printables.com/@Willi/store" rel="nofollow noopener">Exclusive models, printables. (Credit card)</a></li><li><a target="_blank" href="https://than.gs/u/1578655?plans=true" rel="nofollow noopener">Exclusive models, thangs. (Paypal, Credit card)</a></li></ul><h4>Update:</h4>(31/10/23)<ul><li>improved connection between modules</li><li>easier to push back the drawer</li><li>print profile optimizations</li></ul>(26/01/24)<ul><li>design optimizations to prevent warping</li></ul><h4>Printing:</h4>Layer height: 0.2Supports: NoBrim: NoMaterial: all&nbsp;<h4>Assembly:</h4>Follow the instructions in the picture.<ul><li>printed parts</li><li>16 x M3x8 countersunk screws.</li></ul>If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=WGL5LXN5EHEXN" rel="nofollow noopener">If you want to support my work buy me a coffee (PayPal).</a> Thanks!&nbsp;