ivandepool30

Encrust3d

This is a Gameboy inspired case I made for the V1 and V2 apple air pods. This case may be a tight fit on your air pods, but it is to ensure your air pods do not fall out of the case and to make sure the lid does not fall off. V2 air pods are more snug than V1 air pods. If you are having a hard time removing your air pods from this case, you can use the charger to push the air pods out of the case from the bottom. This design does not need any supports to print and has two profiles uploaded, one single color and one multi color. I printed this in yellow as a throwback to my first gameboy color which was the pikachu edition. Please do not sell my designs.&nbsp;If you would like a regular Airpods case you can download it here: <a target="_blank" href="https://makerworld.com/en/models/136248#profileId-148205" rel="nofollow noopener">https://makerworld.com/en/models/136248#profileId-148205</a>If you would like an Adventure Time BMO Airpods case, you can download it here: <a target="_blank" href="https://makerworld.com/en/models/136265#profileId-148228" rel="nofollow noopener">https://makerworld.com/en/models/136265#profileId-148228</a>

Gameboy Airpods Case

AirPod 

3D Art

Ich habe endlich mein eigenen AMS Aufsatz konstruiert so wie ich es benötige und optisch Cool und praktisch finde.(inspiriert von Ben Levi)&nbsp;-Größeres Fach für Druckplatten.-Sortierte Zubehör Schublade. für nozzle,etc.-integriertes LED zum Anschrauben mit M3 Schrauben/Muffen.&nbsp;LED: <a target="_blank" href="https://www.amazon.de/dp/B0B1J69YMH?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.de/dp/B0B1J69YMH?psc=1&ref=ppx_yo2ov_dt_b_product_details</a>Gewindeeinsätze M3: <a target="_blank" href="https://www.amazon.de/ruthex-Gewindeeinsatz-Sortimentskasten-St%C3%BCck-Kunststoffteile/dp/B08K1BVGN9/ref=asc_df_B08K1BVGN9/?tag=googshopde-21&linkCode=df0&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694&psc=1&mcid=d1c8f62ec46d31139b06805550f3488f&th=1&psc=1&tag=&ref=&adgrpid=79663322117&hvpone=&hvptwo=&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694" rel="nofollow noopener">https://www.amazon.de/ruthex-Gewindeeinsatz-Sortimentskasten-St%C3%BCck-Kunststoffteile/dp/B08K1BVGN9/ref=asc_df_B08K1BVGN9/?tag=googshopde-21&linkCode=df0&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694&psc=1&mcid=d1c8f62ec46d31139b06805550f3488f&th=1&psc=1&tag=&ref=&adgrpid=79663322117&hvpone=&hvptwo=&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694</a>M3 Schrauben: https://www.amazon.de/St%C3%BCck-Linsenkopf-Schrauben-M3x6-Linsenkopfschrauben/dp/B07K7NRDPX/ref=sr_1_2?&nbsp;I have finally designed my own AMS attachment the way I need it and find it visually cool and practical.(inspired by Ben Levi)-Larger compartment for printing plates.-Assorted accessories drawer. for nozzle, etc.-integrated LED for screwing on with M3 screws/sleeves.&nbsp;LED: https://www.amazon.de/dp/B0B1J69YMH?psc=1&ref=ppx_yo2ov_dt_b_product_details&nbsp;I would like to share my work with you and hope you have fun and enjoy it.&nbsp;

AMS Riser Superstructure by 3D Art/ X1/P1

3D print

摄影师陈文坚

优点：方便，环保，节约时间缺点：不美观，机器贴墙背后不好操作<figure class="media"><oembed url="https://www.bilibili.com/video/BV1wb421p7u7/?vd_source=d88f326b56d8884f63513f2b8e81cc59"></oembed></figure><figure class="image"></figure><figure class="image"></figure><figure class="image"></figure>

Bambu P1S&P1P  带刺马桶竹屎收集

LorenzCR

Ultrasound photo frame, print a 6cm x 6cm image.

Ultrasound photo frame

jere 

AskNinjaTom

Would recommend printing this in PETG&nbsp;<figure class="image image_resized" style="width: 34.72%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000469523/design/2024-05-20_4d8383747c645.gif"></figure>&nbsp;This fishing tackle box is great for anglers on the go! It has a push-button lock that keeps your gear safe. Inside, there are many compartments to store lures, hooks, and other fishing items. On the side, there is a slide-out ruler to measure your catch, perfect for any fishing trip.&nbsp;2 GRID DESIGNS AVAILIBLE =<figure class="table"><table><tbody><tr><td>OPTION 1<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000469523/design/2024-05-19_70a03f971e002.png"></figure></td><td>OPTION 2<figure class="image image_resized" style="width: 92.29%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000469523/design/2024-05-19_f41307669aae5.png"></figure></td></tr></tbody></table></figure>&nbsp;3 LID DESIGNS:<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000469523/design/2024-05-20_daba47bc09841.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000469523/design/2024-05-20_67662fff8b83b.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000469523/design/2024-05-20_cd9048dd1d767.png"></figure></td></tr></tbody></table></figure> SLIDE OUT RULER &nbsp;<figure class="image image_resized" style="width: 98.24%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000469523/design/2024-05-19_27b476d3ddbcc.png"></figure>&nbsp;

PUSH BUTTON TACKLE BOX WITH BUILT IN RULER

fishing

Codyinbody3

As some of you may know I have a ton of honeycomb models printed and put up in my printing room so I thought I'd design a Honeycomb Wall Shelf to put some of my smaller models. These shelves are stackable and dont use a lot of material like the other Honeycomb Shelves I've found. It prints fairly quickly too. Enjoy!

Honeycomb Wall Shelf

wall mount

waltersworld3d

<a target="_blank" href="https://www.patreon.com/waltersworld" rel="nofollow noopener">https://www.patreon.com/waltersworld</a>&nbsp;Be sure to check out our Patreon for all newly released models, monthly giveaways, and the opportunity to have models designed custom for you&nbsp;Guns have been updated since original model was created. Fairly simple print. Don&#39;t mess with his dog. Don&#39;t mess with his car. Pencil not included.

Bricks John Wick

lego

AdditivInvent

Iphone 13/14 Louis Vuitton

Iphone

Collecticraft

<h2>NObody Yoga: A Serene Journey</h2>Embark on a journey of self-discovery with Nobody Yoga, a captivating sculpture designed to evoke a sense of peace and mindfulness. 3D sculpted with precision and care, this exquisite piece captures the essence of yoga practice in its graceful form and intricate details.<h3>Key Features:</h3><ol><li>Serene Sculpture: Nobody Yoga is a mesmerizing blend of artistry and tranquility, inviting you to find inner peace through its elegant design.</li><li>Mindful Detailing: Each curve and contour of the sculpture is meticulously sculpted to reflect the fluidity and grace of yoga poses, creating a harmonious aesthetic.</li><li>Inspirational Essence: With its serene presence, Nobody Yoga serves as a reminder to embrace the present moment and cultivate mindfulness in your daily life.</li><li>Supportless challange: The file is actually splitted into pieces but if you find the right settings you can easly print it supportless</li><li>Commercial License: <a target="_blank" href="https://www.patreon.com/CollectiCraft" rel="nofollow noopener">Patrons</a> also gain access to a commercial license, allowing them to explore their own creative projects with the beauty and inspiration of Nobody Yoga.</li></ol>Elevate your space and nurture your inner peace with Nobody Yoga. Join us on <a target="_blank" href="https://www.patreon.com/CollectiCraft" rel="nofollow noopener">Patreon</a> to discover the beauty of mindfulness in art.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/794173/2024-03-23_2587d31be8a9e.jpeg"></figure>

NObody Yoga: A Serene Journey 

amor

reddadsteve

Sonic, the title character of Sega's Sonic the Hedgehog video game franchise, created by Naoto Ohshima and Yuji Naka.Sonic is a blue hedgehog who can run at supersonic speeds and curl into a ball to attack enemies. He races through levels, collecting power-up rings and avoiding obstacles, as he seeks to defeat the mad scientist Doctor Eggman.No supports are required. Two pieces contains built-in supports/braces. Optional parts without the built-in supports/braces are also supplied if you want to use your slicer supports (see notes below). If you have the proper filament colors, no painting is needed.The assembled model is 155mm tall.Note: As I research characters that I model, I learn quite a bit of interesting background on the characters. I found a video of how Sonic was created and how he evolved over the years extremely interesting. The video can be found at the beginning of the following article:http://www.insider.com/every-version-sonic-the-hedgehog-1991-today-evolution-2020-2Enjoy!...........................................................................................................Special shoutout to maker Benoît Lussier for providing QA printing and quality feedback............................................................................................................**Print Instructions:** Supports: No Resolution: .2mm (see below for printing tips suggested optional exceptions) Infill: 10%Notes:**Refer to the notes below for a few helpful printing and assembly instructions............................................................................................................**Building the model**ColorsBlack: (Paramount3D PLA - Black) eye_black_right eye_black_left nose ..Skin: (Paramount3D PLA - Universal Beige) arm_right arm_left mouth belly ear_left ear_right ..Yellow: (Paramount3D PLA - Simpson Yellow) buckle_right buckle_left ..Gold: (DevilDesigns Silk - Gold) ring ..Blue: (Parmount3d PLA - Cadet Blue) body head head_without_supports (optional piece) leg_right leg_left ..Red: (3DFuel PLA - Iron Red) shoe_left_front shoe_left_back shoe_right_front shoe_right_back ..White: (Overture PLA - White) eye_white_dots (contains two identical pieces) eye_whites shoe_strap_right shoe_strap_left shoe_top_right shoe_top_left hand_right hand_right_without_supports (optional piece) hand_left ..Matte Black: (Paramount3d PLA - Matte Black) shadow_base (optional base for extra stability) .. Any color: (hidden piece): pin_belly .............................................................................................................**Printing and assembly tips**Printing tips 1 - No supports are required. Two pieces contains built-in supports/braces, head and hand_right. Optional parts without the built-in supports/braces are also supplied if you want to use your slicer supports. The built-in supports/braces are designed for a .4mm nozzle and for the size that the model is presented. Use your discretion for which parts to use if you resize the model significantly.2 - There are some pieces that may need brims or rafts, use your discretion. When setting up my prints I prefer to be conservative to ensure the least chance of a print failure, especially since the base of many parts are hidden when inserted into another part. *I used brims on: - nose - eye_white_dots - arm_right - arm_left - leg_right - leg_left - hand_left - hand_right3 - The eye_white_dots parts are very small. I left them on the brim and inserted them with the brim attached, I then removed the brim. This is the only part where the bed side is on the outside.4 - I had no problem printing and assembling the legs but Benoit found that for the right leg, 10% filling was not enough and his leg was very brittle. He felt that 50% infill would be better.5 - Some parts print better with a lower layer height. I used variable layer height on the belly (so the top layers are thinner) and and on the ring (to help print the bottom part of the curves better).6 - The model stands on it's own but an optional base, that is included, may be prefered for extra stability.7 - When removing parts from the printer bed, it's a **VERY** good idea to place left/right parts into separate containers to help with the assembly process. Sometimes the difference between the left and right parts is very small but it is still worth keeping track of them and assembling them in their proper place... Assembly tips:1 - Take your time gluing the model together and enjoy the process. Give some thought into which parts to glue together as groups and then gluing the groups together. Let the glue for each group set completely before combining groups.2 - I used 3D Gloop and E6000 to put this model together. I am not affiliated with 3D Gloop but have experimented with different glues for my models and have found that this glue is a great option for my models. Each type of glue has different pros/cons and I found that 3D Gloop was far easier to use than superglue (for me). The E6000 sticky glue that I also use allows more time to position parts and is still the best for smaller parts. 3D Gloop covers the middle ground for me and really works wonders. It leaves enough time to set, so parts can be positioned correctly and it dries fast enough to hold awkward parts without the need for taping. I used the PLA version that comes in a tube. For both glues using a smaller amount is usually better than more glue.3 - Due to the goal of creating parts that print easily, some of the connections are not as 'sturdy' as I would have liked. However, taking care when gluing and having the patience to let things dry properly works fine.4 - Gluing in the legs to the body without the shoes is much easier than gluing in the legs to the shoes first and then inserting the whole section to the body.5 - For the installation of the buckle on the right shoe, this needs to be done before the shoe is fixed to the right leg. If you wait to the end, the left shoe is in your way to install the buckle on the right shoe.6 - In order to get proper positioning of the right arm so that the ring touches the base correctly, follow these steps. The right hand should be installed first to the extremity of the right arm. After glue curing, the ring should be fixed and glued inside the right hand. After a dry fit check position of the arm inside the body, the right arm assembly can then be glued to the body. 7 - Refer to the assembly diagrams in the pictures section as well as the uploaded pictures for putting the model together. The model is meant to be glued.Do not hesitate to ask questions, feedback is essential to making better models.&nbsp;

Sonic - Classic

sonic

3DPrintWell.co.uk

I redesigned the classic Hook and Loop game to be easy to 3d print. Fishing line not included!

Hook Game!

table games

Bugs Bunny, a fictional cartoon character in the Warner Bros. Looney Tunes/Merrie Melodies series.Bugs is an anthropomorphic gray and white rabbit who is famous for his flippant, insouciant personality. Due to Bugs' popularity during the golden age of American animation, he became not only an American cultural icon and the official mascot of Warner Bros. Entertainment, but also one of the most recognizable characters in the world.Bugs' trademark phrase is: "Eh...What's up, doc?"This model is designed to be paired with my Elmer Fudd model to complete the full iconic scene with Bugs' finger in Elmer's gun (or scythe).No supports are required. Two pieces contains built-in supports, optional parts without the built-in supports are also supplied if you want to use your slicer supports. If you have the proper filament colors, no painting is needed.The assembled Bugs model is 134mm tall.Enjoy! ...........................................................................................................**Print Instructions:** Supports: No Resolution: .2mm Infill: 10%Notes:**Refer to the notes below for a few helpful printing and assembly instructions............................................................................................................**Building the model**ColorsBlack: (Paramount3D PLA - Black) whiskers_right whiskers_left eye_black_right eye_black_left hole_black ..Light Pink: (eSun ABS - Pink) ear_right ear_left nose ..White: (Overture PLA - White) eye_white_right eye_white_left hand_right hand_left body_white body_white_nosupports (optional part without built-in supports) ..Gray: (Paramount3D PLA -Prototype Gray) body_gray body_gray_nosupports (optional part without built-in supports) body_gray_extra ..Brown: (Gizmo Dorks ABS - Brown) hole_brown ..Natural: (eSun ABS - Natural) teeth .............................................................................................................**Printing and assembly tips**Printing tips 1 - No supports are required. The body_gray and body_white parts are presented with built-in supports as well as optional pieces without supports if you want to use your slicer supports.2 - There are some pieces that may need brims or rafts, use your discretion. When setting up my prints I prefer to be conservative, especially since the base of many parts are hidden when inserted into another part. For the smaller parts, a good first layer is helpful.*I used brims on: hand_right hand_left nose teeth eye_black_right eye_black_left3 - Bugs' nose is sometimes shown as black, red or pink. I went with the light pink for my print.4 - The model is meant to be displayed with Bugs' finger in Elmer's gun, however he can also be displayed standalone pointing to a sign. I'm hoping some makers will produce one or more appropriate signs and post them as remixes... Assembly tips:1 - Take your time gluing the model together and enjoy the process.2 - I used E6000 sticky craft glue to put this model together. The sticky glue allows more time to position the parts than a fast drying superglue. I have 'fat fingers' and a shaky hand, so the sticky glue works out best for me, especially with small pieces. Just remember to leave enough time for the glue to set before combining too many parts.3 - The hole_black has some rotational leeway when fitting into the hole_brown. I suggest gluing in the Bugs figure (body_gray/body_white/body_gray_extra/hand_right already glued together) into the hole at the same time as you glue the hole_black and brown together.4 - The holes for the whiskers are symmetrical but for some reason on my printer I get a slight bridging hang on the hole for the left whiskers. If you have any problem fitting the whiskers in, just clean out any loose filament from the holes.5 - Refer to the assembly diagrams in the pictures section as well as the uploaded pictures for putting the model together. The model is meant to be glued.Do not hesitate to ask questions, feedback is essential to making better models.&nbsp;

Bugs Bunny

toons

Stag 3D

<h3>How to play:</h3><ol><li>Setup the base on a flat surface and place the Tetra Balance block onto it.</li><li>Take it in turns with your opponent to place the blocks onto the Tetra Balance piece. You can place the blocks with one hand only and once you have chosen a bloke you cannot change it.</li><li>Repeat until the tower eventually falls. </li><li>If you cause the tower to fall your opponent wins. </li></ol>&nbsp;

Tetra Balance Game

cosas

AcmeArt

Introducing “Distinguished Gentleman” Tophat skull. (with or without monocle in two versions. PLEASE read everything here.&nbsp;The skull without monocle is under raw files, second one down. Cheers!&nbsp;&nbsp;Already Multicolor printed, for easy color printing, print in however many colors as you like!My newest release for my Skulls collection! FREE for commercial use! (not distribution) TWO versions! One skull WITH a monocle, one without!.&nbsp;&nbsp;Both versions are available below.&nbsp;Thouroughly Tested and Prints amazingly well!&nbsp;Only needing 9% Support, ONLY on build plate&nbsp;I love using Hilbert Curve Infill, and comes with the download, but choose what you love best! (wouldn&#39;t recommend GRID)&nbsp;ALSO I have only prepainted the Monocle Version. I may eventually post the standard Distinguished Gentleman version with painted as well.

Distinguished Gentleman Skull with monocle/no mono

skul

pbbence1994

A fairly accurate kit card model of a Bell 206B Jetranger helicopter.With it's beautiful multicolor paintjob looks good as desk decoration, but it can also serve as a fidget toy, because the props can spin pretty satisfiingly well. Cut the part out with pliers or nail sissors. The assembly is easy and self explanatory. Have fun printing it!&nbsp;

Helicopter Kit Card (Bell 206B Jetranger)

Ian’s 

braga3dprint

The 3D model of a lightbox featuring an Air Jordan shoe offers a unique and customizable piece of art. Unlike the iconic red typically associated with Air Jordan, this design lets you pick the color that resonates with your personal style and preferences. Showcasing the unmistakable silhouette of this legendary sneaker, the lightbox is a versatile addition to any sneakerhead's collection. Its captivating design pays homage to the world of sneakers and allows you to express your individuality by choosing the perfect color to match your space. Shine a light on your love for sneaker culture with this adaptable and stylish lightbox. 👟💡 If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign! WARNING!- remove purge line at the beginning of the print!&nbsp;Materials and tools: - glue gun - aluminum tape - led strip (here is the one I <a target="_blank" href="https://pt.aliexpress.com/item/1005004253095880.html?spm=a2g0o.order_list.order_list_main.16.1df1caa45b098E&gatewayAdapt=glo2bra" rel="nofollow noopener">use</a>): simple 1m white led USB- soldering iron (optional)&nbsp;RECOMMENDATIONS- use a textured PEI sheet - remove purge line at the beginning of the print! - use the print profile, it has quite a few setting changes that help achieve the best results - make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer- use the aluminum tape on the inside of the backplate to help with light diffusion - glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible Bambu Studio Settings: I always recommend using the print profile I provided since it has settings with which I've been able to get the best results. If you choose not to here are the main slicer settings I recommend: - preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 - Quality → Wall generator → Arachne - Quality → Wall transitioning threshold angle → 50º - Strength → Advanced → Infill/wall overlap → 20% - Quality → Advanced → Avoid crossing walls - Increasing retraction / reducing temperature can help reducing wisps - Order color printing from lightest to darkest color How to make a hole in Bambu Studio:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=OsA23WCxRtg"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/OsA23WCxRtg" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure> Assembly video: <figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=QNsShLmXYh0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/QNsShLmXYh0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Air Jordan Nike Lightbox LED Lamp

jordan 

Kugelmann

say hi to "Marie" the cute ladybug aka. ladybird aka. in danish “mariehøne”, which i made for my grandchild who loves flexible toy.&nbsp;You can customize the colors or resize her as you like, also consider using support for the print, buts that's up to you i printed her with support which is included in the profile, also remember to clean your bed before you print.&nbsp;if you want to sell this item, then please buy it and the rights here: <a target="_blank" href="https://cults3d.com/:1839189" rel="nofollow noopener">https://cults3d.com/:1839189</a>&nbsp;Hope you like her, my grandchild does :)&nbsp;please check my profile for what else i've made for this grateful maker world community.<a target="_blank" href="https://makerworld.com/en/u/1549602616" rel="nofollow noopener">https://makerworld.com/en/u/1549602616</a>&nbsp;Stay tuned at my profile for new ideas :)

Articulated And Flexible Cute Ladybug aka. ladybird

kids

el señor de los 💍

filete3d

Airless Tennis Ball version 1.1. Tested and approved! &nbsp;After several tests, we concluded that the geometry presented in this model is the one that performs the best with the given materials.&nbsp;The conclusions on recommended materials show that to achieve impact resistance it must be printed on flexible materials with a certain level of hardness to keep bounciness.&nbsp;The best material to print this ball is TPU 98A since it gives a bounce similarity to the real one. (Almost 50% from the drop distance)PLA Flex also gives a bounce similar to the official one but can be seen some cracks after a while of use. (We are testing a new mesh redesign for this material in particular).TPU 95A resists impacts without breaking but has a bounce reduced to approximately 20%.&nbsp;PLA or PLA+ will work only for displaying purposes. We do not recommend using these materials if you want to make it bounce as it can break easily.&nbsp;v1.1 Fixed seam line detail to enhance bevel from hex mesh.&nbsp;V2.0 already uploaded!, check it out here: <a target="_blank" href="https://makerworld.com/en/models/253687#profileId-270125" rel="nofollow noopener">https://makerworld.com/en/models/253687#profileId-270125</a>&nbsp;Check my current state on airless balls:Airless Ping Pong ball <a target="_blank" href="https://makerworld.com/en/models/386079#profileId-286461" rel="nofollow noopener">https://makerworld.com/en/models/386079#profileId-286461</a>Airless Tennis Ball v2.0 <a target="_blank" href="https://makerworld.com/en/models/253687#profileId-270125" rel="nofollow noopener">https://makerworld.com/en/models/253687#profileId-270125</a>Airless Baseball Wiffle Softball Ball v2.0: <a target="_blank" href="https://makerworld.com/en/models/227359#profileId-244997" rel="nofollow noopener">https://makerworld.com/en/models/227359#profileId-244997</a>Airless Basket , Soccer, Voley or Handball Ball v1.2: <a target="_blank" href="https://makerworld.com/en/models/223189#profileId-241192" rel="nofollow noopener">https://makerworld.com/en/models/223189#profileId-241192</a>Airless Golf Ball: <a target="_blank" href="https://makerworld.com/en/models/383904#profileId-284030" rel="nofollow noopener">https://makerworld.com/en/models/383904#profileId-284030</a>&nbsp;&nbsp;&nbsp;

Airless Tennis Ball v1.1

one pice

3DPrintable.art

<figure class="table"><table style="border:0px solid rgb(179, 179, 179);"><tbody><tr><td style="border:0px solid rgb(255, 255, 255);padding:0.4em;"><h2>Please read these instructions before printing!</h2></td></tr></tbody></table></figure>These adorable voodoo toys come in two variants: one with a sad expression and the other with a cheerful smile. They make perfect gifts or decorative items and have movable arms and heads.&nbsp;While the provided multi-color print demonstrates one coloring option, it took 4 days to complete with a 0.16 layer height. You have endless possibilities for coloring and <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/multi-color-printing" rel="nofollow noopener">experimenting with different colors</a>. Get creative and share your results!&nbsp;Don't be scared but printing this model will require some form of support. It's easier to print it lying down, but you might be able to print more toys simultaneously while standing.<figure class="table" style="width:919.672px;"><table class="ck-table-resized" style="border:0px solid rgb(255, 255, 255);"><colgroup><col><col></colgroup><tbody><tr><td style="border:0px solid rgb(255, 255, 255);padding:0.4em;"><figure class="image image_resized" style="width:58.05%;"><img src="https://makerworld.bblmw.com/makerworld/draft/396613/2024-01-07_5d0b1f6f64bcb.png"></figure><figure class="image image_resized" style="width:58.27%;"><img src="https://makerworld.bblmw.com/makerworld/draft/396613/2024-01-06_c2821558f89f1.png"></figure></td><td style="border:0px solid rgb(255, 255, 255);padding:0.4em;">Examples of finished prints with supports. As you can see, the model is surrounded by these weird structures, which are called supports.&nbsp;Support structures are used to support overhanging geometries and need to be removed once printing is over.&nbsp;There are <a target="_blank" href="https://www.google.com/search?q=How+to+remove+support+structure+from+3D+prints" rel="nofollow noopener">multiple guides online</a> that will teach you how to use and remove supports, but it might be helpful to use some of these tools:<figure class="image image_resized" style="width:316.688px;"><img src="https://makerworld.bblmw.com/makerworld/draft/396613/2024-01-06_3aba5e239a66c.png"></figure>&nbsp;Please avoid applying excessive force by hand, as it might break the printed object. Be patient to achieve the highest possible quality.&nbsp;Bambu Lab also has a great <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/support" rel="nofollow noopener">wiki article</a> that explains how you can use different support settings. If you find a better support configuration, please share your print profile.</td></tr></tbody></table></figure>For a perfectly smooth surface, you can use a different <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/layer-height#effect-of-layer-height" rel="nofollow noopener">layer height</a> (0.16 for example) or experiment with<a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/adaptive-layer-height" rel="nofollow noopener"> variable layer heights</a>. In any case, expect the printing time to increase significantly, especially for multi-color prints.<figure class="table"><table style="border:0px solid rgb(179, 179, 179);"><tbody><tr><td style="border:0px solid rgb(191, 191, 191);padding:0.4em;">To <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/reduce-wasting-during-filament-change" rel="nofollow noopener">minimize filament waste</a>, we strongly recommend printing multiple objects simultaneously.&nbsp;The provided print profiles are merely suggestions, and when selecting different colors, please ensure that you update the <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/reduce-wasting-during-filament-change#auto-calc-flushing-volumes" rel="nofollow noopener">flushing volumes</a> to prevent any unexpected color mixing.</td><td style="border:0px solid rgb(191, 191, 191);padding:0.4em;"><figure class="image image_resized" style="width:78.91%;"><img src="https://makerworld.bblmw.com/makerworld/draft/396613/2024-01-06_500fdaa4282.png"></figure></td></tr></tbody></table></figure><figure class="table"><table style="border:0px solid rgb(255, 255, 255);"><tbody><tr><td style="border:0px solid rgb(255, 255, 255);padding:0.4em;"><figure class="image image_resized" style="width:72.32%;"><img src="https://makerworld.bblmw.com/makerworld/draft/396613/2024-01-06_4c5094fc8f382.png"></figure></td><td style="border:0px solid rgb(255, 255, 255);padding:0.4em;">If you want to create your own print profile, please note that the neck is typically the weakest spot. It is recommended to reinforce it with a higher infill or additional wall loops.&nbsp;This should prevent it from breaking easily when removing supports or playing with the toy.</td></tr></tbody></table></figure>&nbsp;COMMERCIAL LICENSE AVAILABLE: <a target="_blank" href="https://patreon.com/3DPA" rel="nofollow noopener">https://patreon.com/3DPA</a>&nbsp;Check out <a target="_blank" href="https://makerworld.com/en/u/943536974" rel="nofollow noopener">our other models</a>. Your likes and downloads support more content.&nbsp;Happy printing!&nbsp;

Cute Articulated Voodoo Toy (print-in-place)

bayfaire

My Free Bust of a Pilot Hero which is a part of my newly created Custom Bust Series.&nbsp;Check out the entire Collection of my busts here: <a target="_blank" href="https://makerworld.com/@bayfaire/collections/942237" rel="nofollow noopener">https://makerworld.com/@bayfaire/collections/942237</a>I will be updating often with free and premium busts so please do follow me on Makerworld and Patreon!&nbsp;Check out all my paid busts and get access to monthly STL's on my Patreon + Commercial License!Patreon: <a target="_blank" href="https://www.patreon.com/Bayfaire/" rel="nofollow noopener">https://www.patreon.com/Bayfaire/</a>&nbsp;Patron's also receive PNG images of all bust models to create their own previews!&nbsp;All busts will follow the same base stand as this free one so you wont have to worry on reprinting and testing every time!Some Settings information:busts will come with a variety of models allowing you to multi-color your bust. The bust, stand, and even the text base insert portion can be printed separately and inserted into the stand.An circular insert is placed inside the bust itself for easy assembly to the pole and the standNote: Text box Insert is a tight fit with low tolerance, if you would like a more easier fit then lower size from 99% to 98% or 97% or size down the x,y,z by 1mm on each side

Pilot Hero Bust

call of duty

PhaseworksCA

UPDATE: I've uploaded a thinner (2mm version which is still rigid enough to look good and stand properly. It uses almost 50% less filament and prints a bit quicker :)&nbsp;If you would like to know how long I spent messing around with the sketch in fusion360 instead of in adobe illustrator where I should have been doing it… please ask my therapist.&nbsp;It came out pretty well though! I added some more supporting sections in the uploaded version to make it into a more solid piece / a bit more rigid.&nbsp;Commemorate your time playing god of war, or just give as an inventive “Best Dad” Trophy. The choice is yours.&nbsp;This one is a whole bed print, I recommend you give your bed a good clean with isopropyl alcohol before printing to ensure good adhesion. The small display stand must be printed seperately, but only takes 20 mins by itself.&nbsp;<figure class="image image_resized" style="width:100%;"><a href="https://www.printables.com/@PhaseworksCA/store" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/599339/2024-02-27_cbac20a9d0926.png"></a><figcaption> </figcaption></figure>

Runic Circle Geometric Kratos - God of War

god of war

3DCREATION

Completely redesigned in Fusion 360, this Piston Cup is an accurate representation inspired by the iconic racing trophy featured in the 2006 film 'Cars.' Impeccably crafted to emulate its on-screen counterpart, this rendition captures the essence and intricate details of the beloved Piston Cup.

PISTON CUP TROPHY (CARS) REPLICA

cars

3DPODesigns

UPDATE: Per requests in the comments, I've added a way to add weight to the Hex Paper Towel holder if you find it necessary. You do NOT need to reprint the paper towel holder itself. Simply print the “Hex Paper Towel Holder Plug” profile, fill the hollow portion of the paper towel base with sand/dirt/or weighted material of your choice and press fit the plug into the hollow hole in the base(I was able to add 150 grams of sand to mine). Make sure you leave enough room to push the plug down far enough to sit flat. I've included a small grip on the plug for ease of guidance, as well as removal with pliers if you ever feel the need. From my testing it does not need glue, but if you want it 100% permanent, please add a dab to the sides of the plug before inserting. Pictured below is the plug assembly,<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381832/2023-12-16_d456b79522b16.png"></figure><ul><li>This is a beautiful, functional, low filament using paper towel holder I designed for my own home. Using hexagons I've made this paper towel holder both strong and light using only 135 grams of filament and NO supports!</li></ul>&nbsp;<ul><li>Specifically sized to be printable on the A1 Mini!</li></ul>&nbsp;<ul><li>Keep in mind this model is again, light, so you may need to hold it while removing a paper towel. However, I found with even my own metal holder at home I still had to do that 90% of the time, so the filament savings seemed like a worthy trade off.</li></ul>&nbsp;<ul><li>This paper towel holder should fit most small to large rolls (though I've only tested a few I have access to)</li></ul>&nbsp;<ul><li>I've included both Default Speeds and Normal profiles as my testing with PLA at Default Speed settings was great, but if you want to print in PETG it can have flow issues, so just make sure your flow rates are tuned if using the fast profile. I strongly urge you to use the normal profile if you are unsure of your flow rates. I do not have a tuned profile for A1 mini, but I've included a fast profile that should work fine as long as your flow rates are tuned. Please let me know if you have any issues with it (I printed both the fast and normal profiles a total of 5 times each, but your experience matters!) and feel free to upload your own A1 profiles!</li></ul>&nbsp;<ul><li>If you enjoy this model please toss it a like!</li></ul>&nbsp;&nbsp;

Hex Paper Towel Holder

home 

Basso_Nicholas

Link Zelda

zelda 

左狗拳

模型外形参考：CSGO 骷髅匕首（Skeleton Knife）组装工具：无分件：无分件其他：一体打印，请视自己机器设置打印参数。原创模型，仅供个人打印，请勿商用。组装视频<figure class="media"><div data-oembed-url="https://www.bilibili.com/video/BV1yr4y1X7Ef/?spm_id_from=333.999.0.0&vd_source=ce261a6ae096f6019cad589ef253bc72"><div class="ck-media__wrapper" data-oembed-url="https://player.bilibili.com/player.html?bvid=BV1yr4y1X7Ef&autoplay=0&poster=1"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://player.bilibili.com/player.html?bvid=BV1yr4y1X7Ef&autoplay=0&poster=1" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>

骷髅匕首（Skeleton Knife）

 Knife 

joshtherealjosh

Loki President Crown from the Loki series. It fits a small head, please scale it to your own.

Loki President Crown

marvel

WagZPrintZ

Krampus vibes on this bad boy! &nbsp;The Naughty Reaper! You been bad? Or you been good!? &nbsp;Scale and color as you wish…but red seems to be appropriate on this one! &nbsp;Enjoy!

Naughty Reaper

😈

TOMF00LRY

This is a platform 9 ¾ sign from Harry Potter. The sign can be printed twice for a double sided sign, or once for single sided. The arm of the hanger needs to be mirrored and both sides printed to use the wall mounted bracket. The bracket is designed to be easy to hang, then the arm slid in from the top with a dovetail joint.&nbsp;These are the chains i used to hang the sign <a target="_blank" href="https://www.amazon.com/dp/B0B5JRVS8S?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">https://www.amazon.com/dp/B0B5JRVS8S?ref=ppx_yo2ov_dt_b_product_details&th=1</a>I had to use pliers to straighten the hooks, feed them through the holes, then bend them back.&nbsp;***update*** made the sign thinner to use less filament, as well as made each color start at a specific height for color changing without an AMS. Also, the holes in the hanger and the sign were made larger to fit a chain more easily.

Platform 9 3/4 hanging sign

Harry Potter 

Covic 3D

Dive into an era of elegance and modern design with our sculptural STL model for a tealight holder. Precisely designed for 3D printing, this model showcases an array of geometric vertical panels converging into a stunning visual centerpiece. Once printed, its dark, matte finish can evoke a sense of sophistication. The gaps between each panel allow the gentle glow of a tealight to shine through, casting intriguing shadows and illuminating a space with warm light. &nbsp;A perfect addition to contemporary interiors, this model is not just a functional item but a design statement that will stand out in any setting. Buy me a coffee to keep the creativity flowing. Your support helps me continue providing free commercial models for everyone. <a target="_blank" href="https://www.buymeacoffee.com/icovic" rel="nofollow noopener">https://www.buymeacoffee.com/icovic</a> You can check also my other design here: &nbsp;<figure class="image"><a href="https://makerworld.com/en/u/3268661592" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/154465/2023-11-17_6d574a09d4879.jpg"></a></figure> .

Tealight holder - Home decor

decor

3D-Baron

This is a great design from eastman from thingiverse.I do not own this model so all credits go to him. I just wanted to print it and couldn't find the model here.Visit his patreon: <a target="_blank" href="https://www.patreon.com/eastman" rel="nofollow noopener">https://www.patreon.com/eastman</a> he does aweseome work!!&nbsp;

TMNT bust (fan art)

ninja turtles 

Introducing the "Black Clover LED" 3D model, a tribute to the popular anime "Black Clover" featuring the iconic Black Bulls logo and the anime's name below it. This unique model comes with individual files for each color variant, allowing you to choose your preferred design.Using the samelayer method, you'll print the first color/STL as you normally would. Then, for the subsequent colors, simply disable bed leveling in the startup G-code and add a 1 mm Z hop. This nifty trick enables the nozzle to gracefully hop over the colors already printed. Start with the lightest color and finish with black for the best results. If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign! WARNING!- remove purge line at the beginning of the print, it may interfere, specially with bigger prints! <img src="https://i.redd.it/uo838wkstaqa1.png">&nbsp;&nbsp;Materials and tools: - glue gun - aluminum tape - led strip (here is the one I <a target="_blank" href="https://pt.aliexpress.com/item/1005004253095880.html?spm=a2g0o.order_list.order_list_main.16.1df1caa45b098E&gatewayAdapt=glo2bra" rel="nofollow noopener">use</a>): simple 1m white led USB- soldering iron (optional)&nbsp;RECOMMENDATIONS- use a textured PEI sheet - remove purge line at the beginning of the print! - use the print profile, it has quite a few setting changes that help achieve the best results - make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer- use the aluminum tape on the inside of the backplate to help with light diffusion - glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible Bambu Studio Settings: I always recommend using the print profile I provided since it has settings with which I've been able to get the best results. If you choose not to here are the main slicer settings I recommend: - preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 to 1.08 - Quality → Wall generator → Arachne - Quality → Wall transitioning threshold angle → 50º - Strength → Advanced → Infill/wall overlap → 20% to 25% - Quality → Advanced → Avoid crossing walls - Increasing retraction / reducing temperature can help reducing wisps - Order color printing from lightest to darkest color How to make a hole in Bambu Studio:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=OsA23WCxRtg"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/OsA23WCxRtg" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure> Assembly video:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=QNsShLmXYh0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/QNsShLmXYh0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;How to print without AMS:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=RUSTGxOOS_U&t=102s"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/RUSTGxOOS_U?start=102" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Black Clover Anime LightBox LED Light

anime

aPyroDesign

This Dancing Skeletons Multicolor Animated Fidget Spinner is designed to be printed as a multicolor print using the AMS, but can be printed using layer swaps or just as one solid color.&nbsp;This fidget spinner is unlike a standard spinner. The shapes that are on the spinners are frames of animation. When you spin the spinner and view the spinner through a smartphone camera, the animations come to life. There are also two other ways to view the spinners. The instructions are below for the 3 different viewing methods.&nbsp;Smartphone Camera Instructions: Click <a target="_blank" href="https://spinnermation.com/pages/cell-phone-method" rel="nofollow noopener">HERE</a>&nbsp;Strobe Light App Instructions: Click <a target="_blank" href="https://spinnermation.com/pages/strobe-method" rel="nofollow noopener">HERE</a>&nbsp;Handheld viewer: Click <a target="_blank" href="https://spinnermation.com/pages/handheld-spinner-viewer" rel="nofollow noopener">HERE</a>&nbsp;&nbsp;&nbsp;&nbsp;You will need an r188 bearing for the spinner.Recommended bearings from Amazon: Click <a target="_blank" href="https://www.amazon.com/dp/B095GTJC1R?linkCode=ssc&amp;tag=onamztravi04a-20&amp;creativeASIN=B095GTJC1R&amp;asc_item-id=amzn1.ideas.1JB9SWU6KEPUY&amp;ref_=aip_sf_list_spv_ons_mixed_d_asin" rel="nofollow noopener">HERE</a>&nbsp;Assembly GuideEasy assembly video: Click <a target="_blank" href="https://drive.google.com/drive/folders/1zjWD1vB6mJ9Tk475IS7QAs6kHIoJ6YSH?usp=drive_link" rel="nofollow noopener">HERE</a>&nbsp;&nbsp;Files included:&nbsp;3MF file that is ready for AMS printing.&nbsp;Solid spinner File for filament swapping. (Optional)&nbsp;Separate layers for multicolor printing (optional. If Needed)&nbsp;Top and Bottom Cap files.&nbsp;Bearing Top Cap. This part is to lock in the bearing.&nbsp;Bearing top tool. This will make it easier to lock on the bearing top cap.&nbsp;&nbsp;Interested in selling my spinners?  Check out my Patreon for more info.  Click <a target="_blank" href="https://www.patreon.com/APD" rel="nofollow noopener">HERE</a>&nbsp;&nbsp;

Dancing Skeletons Animated Fidget Spinner

speaner

Joker 3D

Started to print all the Super Mario Brothers Character & really liked this STAR model BUT needed it with 2 colors (Yellow&black for the eyes) - so made a remix. Thanks @ReProps from printables for great model!&nbsp;Added a Stand for it. Print in 3 Colors: Yellow for the Body, Black for the eyes & Gold for the stand. Enjoy!

Super Star [SUPER MARIO]

mario 

kylemraley

Samurai Mask - Colored

mask

miniShev

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: <a target="_blank" href="https://www.patreon.com/minishev" rel="nofollow noopener">https://www.patreon.com/minishev</a>Patrons have access to all my files in one place, supported miniatures, a request board, as well as commercial options! Come check it out :-)

Yellow Dragon

dragon

<h2>Stranger Things LED Light Box</h2>It is recommended to print the BED CLEANER first!<a target="_blank" href="https://makerworld.com/en/models/78594#profileId-82864" rel="nofollow noopener">https://makerworld.com/en/models/78594#profileId-82864</a> ** USE PROVIDED PRINT PROFILES! THEY HAVESPECIFIC SETTINGS CHANGED TO CLOSE GAPSON FIRST LAYER! ** Drill hole in side or back panel (or cut in slicer) forLED strip light wire. Make sure print bed is CLEAN before printing. REMOVE PURGE LINE RIGHT WHEN THE PRINTSTARTS!! NOT FOR COMMERCIAL USE!For commercial use license visit:<a target="_blank" href="https://ko-fi.com/l3dmodels" rel="nofollow noopener">https://ko-fi.com/l3dmodels</a>

Stranger Things LED Light Box

stranger things 

Diru 3D

Get ready for an incredible gaming experience with our impressive Xbox-themed light box! This light box is a modern and energetic tribute to the brand that has brought countless hours of fun and entertainment to gamers all over the world.With its dynamic design, it allows you to bring the spirit and excitement of Xbox games into your space. Light up the room with a high-tech glow that highlights the iconic Xbox logo and other elements associated with the world of video games.If you're an avid gamer or simply enjoy the thrill of Xbox games, this light box is an incredible way to show your love for this brand. And the best part? Installation is simple; you can glue the pieces together easily and in no time you'll have a touch of adventure and fun in the decor of your space. Be ready to dive into the world of video games with style and excitement!" 🎮🌟💡

Xbox Led Lamp

xbox

Jurassic 

Scattered Collectables

The New and improved version of my printable Brembo coaster set, which i originally designed in June 2022for rights to sell prints visit https://www.patreon.com/ScatteredCollectables&nbsp;- Improved overhangs for better print quality- Better fitment of the coasters so they don't lean- A more accurate logo- Added drain holes for any liquid to escape- New Coaster piece with no hole, as requestedAssembly is easy, just print all of the pieces, and glue the 4 printable bolts into the holes, or use M4 bolts for a more authentic look.&nbsp;I have also added STL files for a Caliper which is blank, and two separate logos which can be printed in multicolour if you wish to make the Brembo words a different colour like seen here in this picture below<img src="https://makerworld.bblmw.com/makerworld/draft/467410/2023-11-11_1411f2cae5a36.png">

Brembo Coaster Set *Improved* 

πxel8ed

Started with designing a “ship in a bottle”. Ended up with this.&nbsp;Updates:<ul><li>1/20/2024: Updated model to double the strength of the webs. Check out the “V2” profiles.</li><li>1/16/2024: Uploaded a few tweaks to the Designer Profile (One, two, and three color versions) which enhance small details on the ship and improve print reliability</li><li>12/26/2023: Added “Optional Uplighting Kit” profile. It&#39;s a fast print, compatible with a variety of LED&#39;s and fits nicely. Makes the base of the model more significant so also a nice upgrade to add a contrasting portion to the base. Pick plate one or plate two depending on your preferred LED&#39;s:<ul><li>Plate 1: Fits the LED puck from the <a target="_blank" href="https://makerworld.com/en/models/13717#profileId-13429" rel="nofollow noopener">Bambu Labs LED Lamp kit</a>.</li><li>Plate 2: Allows the installation of a length of LED light strip (or fairy lights) of various types. If you&#39;re just getting started with custom LED installs <a target="_blank" href="https://youtu.be/exAWzMfmwQ8?si=8TnrTyI9Lngt3264" rel="nofollow noopener">check this video out</a>.</li><li>Plate 3: Includes a lens that fits in the model base to diffuse the light from the LED&#39;s. The Bambu LED is very bright so I prefer printing the lens in white or colored PLA rather than translucent.</li></ul></li></ul>The Designer Profile (One, two, and three color versions) supports all Bambu Lab printers. Just make sure the Designer Profile is selected in Bambu Handy, click Print, then select the plate you want. If you instead open it in Bambu Studio you may need to select your printer model at the top left dropdown and choose to transfer all settings before slicing and sending to the printer.<ul><li>One color takes ~7hrs</li><li>Two color takes ~8hrs</li><li>Three color takes ~24hrs!</li></ul>Big thanks to <a target="_blank" href="https://makerworld.com/en/u/319145709" rel="nofollow noopener">@zviratko</a> for figuring out a work around to make one color prints reliable.&nbsp;Suggestions on removing support material if it does not just pop off initially:First, be sure to let it cool down completely before attempting to remove the support. We want it to be stiff, not flexible.When removing the support; hold the ship portion of the model firmly with one hand, with the other hand use the biggest needle nose pliers you can to grab the support chunk from the bottom where it was attached to the build plate. Make sure you have a firm grip and twist the pliers clockwise/counter-clockwise then pull straight out. Take your time. Don&#39;t expect it to pop off in one go. You&#39;re just hoping to cause some cracking noises. Then move the pliers to a different spot and repeat the twist/pull to hopefully create some more cracking noises. You&#39;re trying to achieve the same effect as when you bend a paperclip back and forth until it breaks. Eventually the support will come loose, just be patient.&nbsp;Enjoy!

A long time ago in a galaxy far, far away....

Star Wars 

Dingus Dude

To be sure you're always downloading the most up to date file, use my “DD” profiles. See changelog below for detailed updates.&nbsp;BetterBoxPrint In Place Double Storage Customizable Divider Parts BoxNot just for Bambu Lab parts! Makes a great jewelry box, too!&nbsp;This is another version of my Print In Place Hinged Box and part of my BetterBox series!Check out the rest of the lineup below to find the ones that fit your needs!<figure class="table" style="float:left;width:35%;"><table class="ck-table-resized" style="border:2px solid hsl(0, 0%, 100%);"><colgroup><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/45645#profileId-47422" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/377353/2023-10-28_e2af4207409738.jpg"></a></figure></td></tr><tr><td style="border:2px solid hsl(0, 0%, 100%);"><a target="_blank" href="https://makerworld.com/en/models/22697#profileId-20609" rel="nofollow noopener">BetterBox</a> <a target="_blank" href="https://makerworld.com/en/models/45645#profileId-47422" rel="nofollow noopener">Customizable Dividers</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/22697#profileId-20609" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/377353/2023-10-27_f53e9d31a992f8.jpg"></a></figure></td></tr><tr><td style="border:2px solid hsl(0, 0%, 100%);"><a target="_blank" href="https://makerworld.com/en/models/22697#profileId-20609" rel="nofollow noopener">BetterBox</a> <a target="_blank" href="https://makerworld.com/en/models/22697#profileId-20609" rel="nofollow noopener">Original Bambu Parts Box</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/45918#profileId-47727" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/377353/2023-10-27_50d65c4b44a158.jpg"></a></figure></td></tr><tr><td style="border:2px solid hsl(0, 0%, 100%);"><a target="_blank" href="https://makerworld.com/en/models/22697#profileId-20609" rel="nofollow noopener">BetterBox</a> <a target="_blank" href="https://makerworld.com/en/models/45918#profileId-47727" rel="nofollow noopener">Empty Storage Box</a></td></tr></tbody></table></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;-Now back to the box that you came here for-&nbsp;FEATURES:&nbsp;Print In Place Hinged Box&nbsp;Compartments:<ul><li>Fully customizable! Use all the included dividers or print any of the ones you want plus more. Whatever you want to store, this box can accommodate. Please share how yours is arranged! There are litterally HUNDREDS of variations! Mix and match divider colors to help organize!</li></ul>Flip Top Lid:<ul><li>Allows for double the storage! The Flip Top prints on a separate plate and is super easy to install. When the Flip Top snaps closed it sits tight to the top dividers so even the tiniest screws won't fall out or move to another compartment! In short, your parts STAY where you put them!</li></ul>&nbsp;Flip Top Installation:<figure class="table" style="float:left;width:50%;"><table style="border:2px solid hsl(0, 0%, 100%);"><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377353/2023-10-31_5a34a1d06579c.gif"></figure></td></tr><tr><td style="border:2px solid hsl(0, 0%, 100%);"> </td></tr></tbody></table></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Box Dimensions175mm length107mm width (not including hinge and latch)61mm height (closed)&nbsp;&nbsp;&nbsp;Of course it's not necessary but if you want to add to my <a target="_blank" href="https://paypal.me/davebarbier?country.x=US&locale.x=en_US" rel="nofollow noopener">beer fund</a> it would be much appreciated! 😄&nbsp;

BetterBox - Flip Top Storage Box

kevinbonnarens45

ninetails on base with the seal of naruto

nine tailed demon fox

naruto

Unleash the power of Dragon Ball Z with this dynamic 3D printable lightbox showcasing its iconic logo. Crafted with precision and flair, this emblematic design pays homage to the legendary anime series. Ideal for fans and collectors, this Dragon Ball Z-themed lightbox radiates energy and nostalgia, infusing any space with the spirit of adventure and martial arts prowess emblematic of the beloved series. If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign! WARNING!- remove purge line at the beginning of the print, it may interfere, specially with bigger prints! <img src="https://i.redd.it/uo838wkstaqa1.png">&nbsp;&nbsp;Materials and tools: - glue gun - aluminum tape - led strip (here is the one I <a target="_blank" href="https://pt.aliexpress.com/item/1005004253095880.html?spm=a2g0o.order_list.order_list_main.16.1df1caa45b098E&gatewayAdapt=glo2bra" rel="nofollow noopener">use</a>): simple 1m white led USB- soldering iron (optional)&nbsp;RECOMMENDATIONS- use a textured PEI sheet - remove purge line at the beginning of the print! - use the print profile, it has quite a few setting changes that help achieve the best results - make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer- use the aluminum tape on the inside of the backplate to help with light diffusion - glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible Bambu Studio Settings: I always recommend using the print profile I provided since it has settings with which I've been able to get the best results. If you choose not to here are the main slicer settings I recommend: - preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 to 1.08 - Quality → Wall generator → Arachne - Quality → Wall transitioning threshold angle → 50º - Strength → Advanced → Infill/wall overlap → 20% to 25% - Quality → Advanced → Avoid crossing walls - Increasing retraction / reducing temperature can help reducing wisps - Order color printing from lightest to darkest color How to make a hole in Bambu Studio:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=OsA23WCxRtg"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/OsA23WCxRtg" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure> Assembly video:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=QNsShLmXYh0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/QNsShLmXYh0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;How to print without AMS:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=RUSTGxOOS_U&t=102s"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/RUSTGxOOS_U?start=102" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Dragon Ball Z LightBox LED Lamp

dragon ball

Marius6182000

Ps5 Game stand

minecraft

BT3D printing

Pokemon logo multicolor keychain 3mf file for Bambulab printers with AMS. Already colored in Bambu studio, facing down to the buildplate.For commercial license please join my patreon:<a target="_blank" href="https://www.patreon.com/BT3DDeusCat" rel="nofollow noopener">patreon.com/BT3DDeusCat</a>

Pokemon logo multicolor keychain

pokemon

chiz_m

<h4>REVISION HISTORY</h4><ul><li>2023-07-19: v1 - Initial release</li><li>2023-10-19: v2 - Updated to address the flaws of the original design; now made to be modular.</li></ul>________________&nbsp;If you find that this adapter works great for you, pls hit that BOOST button!&nbsp;This is spool adapter for Bambu Lab AMS that can fit a wide range of 200g/250g mini spools. See illustration for sample 250g spools that can be accommodated.&nbsp;Version 2 addresses the flaws of the original design where the spindle will break easily either by overtightening or by dropping the spool. This release now has the spindle printed separately from the spool, made wider and is now horizontally oriented for added strength.<h4>PROBLEM</h4><ul><li>The Bambu Lab AMS cannot use 250g spools due to its small size</li><li>Adapters for 250g spool currently available are designed for specific brand of spools therefore each spool needs an adapter printed</li></ul><h4>SOLUTION</h4>Design an adapter for 250g spools that can be printed once and can be reused over and over catering to a wide variety of the mini spools.The threaded hub design lets you spin the spool clockwise to tighten, counter clockwise to unlock, which makes the adapter super quick and easy to transfer to another mini spool!<h4>WARNING / IMPORTANT NOTES</h4><ol><li>Printing profile - please make sure you print the spool with 4 or more walls for added strength.</li><li>Supports are NOT needed on any of the parts.</li><li>DO NOT OVERTIGHTEN as you might split the thread layers</li><li>Proper filament types. Ensure that you have properly calibrated your filament and that the layers strongly adhere. Otherwise, you risk delaminating the layers. DO NOT USE SILK AND MATTE FILAMENT as layer adhesion of these type of filaments are usually not strong enough for these types of applications.</li></ol><h4>ASSEMBLY</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012943/design/2023-10-19_286fcc6674729.png"></figure><h4>COMPATIBILITY</h4>This adapter has been tested to work on the following filament brands&#39; mini spools:<figure class="table"><table style="border-style:solid;"><thead><tr><th>Brand</th><th>OD (in mm)</th><th>ID (in mm)</th><th>Width (in mm)</th></tr></thead><tbody><tr><td>3D Genius</td><td>140</td><td>58</td><td>43</td></tr><tr><td>3D Jake ecoPLA</td><td>140</td><td>51</td><td>44</td></tr><tr><td>Amolen</td><td>150</td><td style="border-style:solid;">55</td><td>35</td></tr><tr><td>Bblife</td><td>134</td><td>53</td><td>44</td></tr><tr><td>Bud3D</td><td>150</td><td>53</td><td>35</td></tr><tr><td>Cindeer</td><td>150</td><td>52</td><td>37</td></tr><tr><td>Creality</td><td>141</td><td>55</td><td>38</td></tr><tr><td>Dikale</td><td>140</td><td>58</td><td>43</td></tr><tr><td>MIKA3D</td><td>134</td><td>53</td><td>44</td></tr><tr><td>MKOEM</td><td>134</td><td>53</td><td>44</td></tr><tr><td>Printbed</td><td>120</td><td>52</td><td>37</td></tr><tr><td>Sunlu</td><td>120</td><td>42</td><td>47</td></tr><tr><td>Tecsonar</td><td>150</td><td style="border-style:solid;">55</td><td>35</td></tr><tr><td>Tinmorry</td><td>150</td><td style="border-style:solid;">55</td><td>35</td></tr><tr><td>Tttyt3D</td><td>134</td><td>53</td><td>44</td></tr><tr><td>Yousu</td><td>152</td><td>54</td><td>40</td></tr></tbody></table></figure>&nbsp;Appreciate if you post your make and the brand you used the adapter for so that I can expand the list!

AirPod

3D print

ps1

jere

fishing

wall mount

lego

Iphone

amor

sonic

table games

toons

cosas

skul

Ian’s

jordan

kids

el señor de los 💍

one pice

it

call of duty

god of war

cars

home

zelda

Knife

marvel

😈

Harry Potter

decor

ninja turtles

anime

speaner

mario

mask

dragon

stranger things

xbox

Jurassic

car

Star Wars

cosas

naruto

dragon ball

ps5

minecraft

pokemon

spool