itulchinsky

iczfirz

Easy print Subcompact prop pistol with detachable slide &amp; barrel. Suggest 0.12mm layer height. Brim all small parts. <h2>For cosplay only. Not intended for use in any illegal activities.</h2>**** Recoil pin spring assembly comes with print-in-place 2 spacer discs. You might mistake it for a support structure. ****<figure class="table"><table><tbody><tr><td><img class="image_resized" style="width: 70.15%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000504858/design/2024-06-21_91ea582efd01f.gif"></td><td><figure class="image image_resized" style="width: 68.52%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000504858/design/2024-06-21_2bb1f47eeae52.gif"></figure></td></tr></tbody></table></figure><h2> </h2>&nbsp;<figure class="image"><a href="https://youtu.be/ug2HAZCRrTI" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000504858/design/2024-06-21_d71848d6271cc.png"></a></figure>Build video link <a target="_blank" href="https://youtu.be/ug2HAZCRrTI" rel="nofollow noopener">https://youtu.be/ug2HAZCRrTI</a>00:00 <a target="_blank" href="https://www.youtube.com/watch?v=ug2HAZCRrTI" rel="nofollow noopener">Demo/intro</a>00:28 <a target="_blank" href="https://www.youtube.com/watch?v=ug2HAZCRrTI&amp;t=28s" rel="nofollow noopener">Timelapse</a>01:16 <a target="_blank" href="https://www.youtube.com/watch?v=ug2HAZCRrTI&amp;t=76s" rel="nofollow noopener">Barrel assembly</a>03:01 <a target="_blank" href="https://www.youtube.com/watch?v=ug2HAZCRrTI&amp;t=181s" rel="nofollow noopener">Slide</a>05:28 <a target="_blank" href="https://www.youtube.com/watch?v=ug2HAZCRrTI&amp;t=328s" rel="nofollow noopener">Recoil spring pin</a> **Hints: Pin spring assembly with print-in-place 2 discs, which allow up to 2 springs (Spring from retractable pen or similar. )08:40 <a target="_blank" href="https://www.youtube.com/watch?v=ug2HAZCRrTI&amp;t=520s" rel="nofollow noopener">Body</a>10:59 <a target="_blank" href="https://www.youtube.com/watch?v=ug2HAZCRrTI&amp;t=659s" rel="nofollow noopener">Slide release</a>11:26 <a target="_blank" href="https://www.youtube.com/watch?v=ug2HAZCRrTI&amp;t=686s" rel="nofollow noopener">Slide release spring</a>14:05 <a target="_blank" href="https://www.youtube.com/watch?v=ug2HAZCRrTI&amp;t=845s" rel="nofollow noopener">Front slide rail</a>15:57 <a target="_blank" href="https://www.youtube.com/watch?v=ug2HAZCRrTI&amp;t=957s" rel="nofollow noopener">Slide stop lever</a>18:39 <a target="_blank" href="https://www.youtube.com/watch?v=ug2HAZCRrTI&amp;t=1119s" rel="nofollow noopener">Mag catch</a>20:06 <a target="_blank" href="https://www.youtube.com/watch?v=ug2HAZCRrTI&amp;t=1206s" rel="nofollow noopener">Mag</a>21:26 <a target="_blank" href="https://www.youtube.com/watch?v=ug2HAZCRrTI&amp;t=1286s" rel="nofollow noopener">Iron Sight</a>24:00 <a target="_blank" href="https://www.youtube.com/watch?v=ug2HAZCRrTI&amp;t=1440s" rel="nofollow noopener">Complete/Demo</a>24:54 <a target="_blank" href="https://www.youtube.com/watch?v=ug2HAZCRrTI&amp;t=1494s" rel="nofollow noopener">Bonus video</a>&nbsp;&nbsp;Springs for retractable pen is enough. <a target="_blank" href="https://www.youtube.com/watch?v=ug2HAZCRrTI&amp;t=328s" rel="nofollow noopener">Transformation</a> by hand. And there is no precision at all. &nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000504858/design/2024-06-23_d6b556e795399.jpg">&nbsp;&nbsp;<h2>Optional kits such as suppressors and extended magazines are coming soon. Follow me, like and boost my models, and stay tuned!</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000504858/design/2024-06-24_9c4273c4978ef.jpg"></figure>&nbsp;&nbsp;prop gun replica glock** remixed from https://www.thingiverse.com/thing:6463737

Subcompact prop pistol, slide & barrel upgradeable

Guns

tomsky000

Legend has it that seeing a unicorn brings good luck, so let this adorable unicorn bring you luck!&nbsp;The size of the model is 4.9*6.2*7cm, for your reference.&nbsp;I offer two print profiles, one is one-color and the other is two-color as shown in the picture, you can choose according to your preference. The eye line is already traced on the model and you can leave it uncolored, but if you want to make it more visible, you can color the eye line with a 0.5 mm fine marker.&nbsp;As you can see, there is already a huge difference in printing time and materials used between one color and two colors, so I decided not to upload a print profile with black eyeliner to avoid unnecessary waste.&nbsp;This model requires little support and no brim, as shown in the slicer preview screen, so please note this if you are downloading the model and printing it yourself.&nbsp;(**A little suggestion, please clean the print plate before printing, to avoid the model not adhere to the heatbed when printing and print failure, you can also use glue if necessary.)&nbsp;Lastly, I hope you&#39;ll enjoy it and like it.

Lucky unicorn

Family

MikeGTP

I designed this little shelving system to hold rolls of filament.&nbsp;No Hardware Required! All 3d Printed Parts!&nbsp;**UPDATE 1/07/24! I added a Stability & Connection Package! It allows you to add stability and connect multiple towers togetherDownload it here <a target="_blank" href="https://makerworld.com/en/models/128634#profileId-139327" rel="nofollow noopener">https://makerworld.com/en/models/128634#profileId-139327</a><figure class="image image_resized" style="width:33.79%;"><img src="https://makerworld.bblmw.com/makerworld/draft/377559/2024-01-07_f4977caec05b9.jpg"></figure><img src="https://makerworld.bblmw.com/makerworld/draft/377559/2024-01-07_52fcdd3f6e021.jpg">&nbsp;**UPDATE 1/09/24! I added a Tool/Parts Tray that mount directly on top of the shelf system!Downloaded it here! <a target="_blank" href="https://makerworld.com/en/models/131452#profileId-142595" rel="nofollow noopener">https://makerworld.com/en/models/131452#profileId-142595</a>&nbsp;<figure class="image image_resized" style="width:37.07%;"><img src="https://makerworld.bblmw.com/makerworld/draft/377559/2024-01-09_09d133952de3e.jpg"></figure><figure class="image image_resized" style="width:36.14%;"><img src="https://makerworld.bblmw.com/makerworld/draft/377559/2024-01-09_ba5b7b4a038dd.jpg"></figure>&nbsp;&nbsp;Some people do not have floor space, or maybe they live in an apartment and cannot adhere things to the wall.This is nice if you have some table space, it would even work on the floor.It allows you to grab a roll from the middle of your pile without toppling, or having to hold the other rolls.Each roll has its own shelf.&nbsp;Not everybody has 150 rolls of filament and needs massive commercial shelving&nbsp;You can stack them one tower tall, or make as many smaller towers that you want&nbsp;&nbsp;&nbsp;There are only 4 individual parts.&nbsp;Easy Assembly!&nbsp;<ol><li>Start off with 4 FEET</li><li>1 SHELF</li><li>4 POSTS</li><li>1 SHELF</li><li>Repeat until you are satisfied with the height, and then you screw on 4 POST TOP CAPS</li></ol>DO NOT OVERTIGHTEN!!&nbsp;I printed all of this at .20 Layer Height 20% Gyroid, 6 side walls and 5 top and bottom&nbsp;ENJOY!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377559/2024-01-06_372ee89eca09c.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377559/2024-01-06_12e4c0c2f17c9.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377559/2024-01-06_44b2afd09109a.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377559/2024-01-06_8c11222cd85a7.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377559/2024-01-06_f676ba7b6233d.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377559/2024-01-06_24ea10bd1b6bc.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377559/2024-01-06_39e1cdd6fa1ca.jpg"></figure>

Filament Spool Shelf System Customizable! No Hardware Needed MB Micro

Storage & Cables

GonesDesign

Clock hands:The hour clock hands lenght : 35mmThe minute clock hands lenght : 45mmYou don't need cap for seconds.I did a lot of tests and it fits perfectly with all clock mechanisms but maybe depending your filament you will need to change the scale step by step.

Clock hands 35mm + 45mm

Clocks

COLOCO

The original assembly was not good, this is an upgraded version, and the assembly is slippery!Modules for magnet with size: 20mm, 15mm, 12mm, 10mm, 8mm, 6mm, 4mm

Modular Magnet Organizer，upgraded version

Magnets

GlennovitS 3D

<figure class="table"><table><tbody><tr><td style="border:4px solid hsl(30, 75%, 60%);">Welcome to GlennovitS3D - fun models for everyone! Join the Club on Printables.com to support creation of new models, get access to exclusive models, and get commercial rights, to sell prints of my models.<a target="_blank" href="https://www.printables.com/@GlennovitS3D#join" rel="nofollow noopener">Join today - GlennovitS3D</a> - or check out my <a target="_blank" href="https://makerworld.com/en/@GlennovitS3D" rel="nofollow noopener">model collection</a> 😁</td></tr></tbody></table></figure><h2>Updates</h2>26. Feb 2024 - Uploaded new version: Inserts with French text (in both Slim and Duo) - but with a maybe more common order of days than the first french version. Thanks for the input in comments! And thanks for sharing images of your prints in nice colors!19. Feb 2024 - Uploaded new versions: Inserts with Dutch, Spanish and German text (in both Slim and Duo)! Thanks for the suggestions and for sharing images of your prints!11. Feb 2024 - Uploaded new versions: Inserts with French text (in both Slim and Duo)! And new Duo version with 1 bigger space pr. day. Both new versions made from requests by fellow makers on MakerWorld. Thanks for commenting, printing and sharing!<h2>Description</h2>Pill organizer for a week, but covered in beautiful textures. They feel awesome in the hand, looks great! Can be easily stacked in the closet/drawer if more than one in the family needs one.<figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/draft/862173/2024-02-07_e6727da3d01bd8.jpeg"></figure>The pills are sorted by day to easily take what you need - nothing more, nothing less! And it is easy to get the pills updue to the fillet-design in the bottom of each space.Helping people to take their medication - that is a cause close to my heart! (Wanna know why? - read further down..)<h2>Overview</h2>For now i comes in 2 sizes to fit different needs:<ul><li>Slim - 1 space pr. day</li><li>Duo - 2 spaces pr. day (fx. morning + evening meds)</li><li>Duo - 1 BIG space pr. day</li></ul>Both sizes come in the following versions.<figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/draft/862173/2024-02-07_aad4f6a13c5d5.jpeg"></figure><h2>Versions</h2>The Inserts comes in different versions of text:<ul><li>No text (possible to add custom text in slicer)</li><li>English - Monday to Sunday</li><li>English - Sunday to Saturday</li><li>Danish - Mandag til Søndag</li><li>French - Dimanche to Samedi</li><li>French - Lundi to Dimanche</li><li>Dutch - Maandag to Zondag</li><li>Spanish - Lunes to Domingo</li><li>German - Montag to Sonntag</li></ul>(If you want the text in another language, please leave a comment and I’ll see what I can do)&nbsp;The Covers comes in 4 styles for now:<ul><li>Simple - all smooth and quick to print</li><li>Tiles - pointy squares (my personal favorite!)</li><li>Pill Shapes - thick line cutouts</li><li>Spiral - extrusion spinning around the cover</li></ul>Combine the size, cover texture and colors to pack your medication beautifully!<figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/draft/862173/2024-02-07_d5c048f1edb3f8.jpeg"></figure><h2>Assembly</h2>Nothing to do here - just print and fill up to use it - and slide the Insert into the Cover!The Inserts have a flexible lock on both sides, to keep the Insert in the cover without sliding out. If the Insert is a little tough to slide in/out, maybe sand a little on the side-locks on the Inserts. But don’t over-do it..<h2>Print instructions</h2>This is pretty simple, but here is a few tips:<ul><li>Supports: No</li><li>Brim: Yes (for the covers standing, a brim can help ensure bed-adhesion)</li><li>Infill: 10% for Inserts - 0% for Covers (to save filament)</li><li>Orientation: The models are oriented in the correct print position</li></ul>Happy printing!<h2>Why this means a lot to me!</h2>I personally live with epilepsy, and just within the last month, I forgot my medication once. Result: I had an epileptic seizure in front of my family. It’s horrifying to wake up after about an hour, not knowing what just happened. No warnings before, no idea what went wrong. But on the other side, it’s not at all fun to be the family either - a wife who knows what’s happening and needs to explain that to 2 + 5 year old kids, seeing their dad lying on the floor shaking. So when I saw the contest for pill organizers, I knew I had to do at least one design! If my design can just help 1 other person, I would be so happy!

Sliding Pill Box (textured box weekly medication)

Pills Medicines

Vadim

Power Bank Type-C in/out 18W (QC3.0)Main fixing: 4x Bolt: M4 x 12mm 4x Nut: M41x IP5328P Board Type-C in/out 18W (QC3.0) : <a target="_blank" href="https://www.aliexpress.com/item/4000448678433.html?spm=a2g0s.9042311.0.0.27424c4dTCRevt" rel="nofollow noopener">https://www.aliexpress.com/item/4000448678433.html?spm=a2g0s.9042311.0.0.27424c4dTCRevt</a>3x Battery 18650: <a target="_blank" href="https://www.aliexpress.com/item/32835679557.html?spm=a2g0s.9042311.0.0.27424c4dTCRevt" rel="nofollow noopener">https://www.aliexpress.com/item/32835679557.html?spm=a2g0s.9042311.0.0.27424c4dTCRevt</a><h4>Print Settings</h4><ul><li>Printer:</li></ul>One custom + KP3s KingRoon<ul><li>Resolution:</li></ul>0.16<ul><li>Infill:</li></ul>20<ul><li>Filament brand:</li></ul>other<ul><li>Filament color:</li></ul>GRAY<ul><li>Filament material:</li></ul>PETG

Power Bank Type-C in/out 18W (QC3.0) (3&5 cells)

Batteries

nicodeimos

Ring hole: 4.8mm.Model size: 36mm x 40mm x 3.2mm.Filaments: Bambu Lab Matte PLA (only 1 AMS needed).&nbsp;Please do not sell, copy, remix or distribute this model.<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=G5FK3QJJUSW8N" rel="nofollow noopener">Enjoying my models? Make a donation!</a><a target="_blank" href="https://makerworld.com/en/u/2495159158" rel="nofollow noopener">Want to sell my models? More info on my profile!</a>&nbsp;Likes, comments and prints help to support me and will be very much appreciated!Feel free to <a target="_blank" href="https://makerworld.com/en/u/2495159158" rel="nofollow noopener">contact me</a> for any information.&nbsp;This 3D model is a unique custom-made version inspired by the work of Nintendo and any brand/studio/production/trademark associated with it. I do not take credit for the original drawing.

Mario Hoppo keychain

Keychains

ian.page38

The only hooks you'll ever consider printing due to their extraordinary versatility and adaptability.Specially designed for the bathroom and shower areas, they are water-resistant, making them perfect for wet environments. Yet, their utility isn't confined to just one room; these hooks are equally efficient in the kitchen for hanging utensils or in the office for organizing supplies. Their flexible nature and strength make them suitable for a wide range of items, bringing convenience and order wherever they're used.3 sizes available to fit all your needs: small, medium and large.<h3>Installation Instructions:</h3><ol><li>Ensure the surface you're applying the hook to is clean and dry for the best adherence.</li><li>Add double sided tape.</li><li>Press the hook against the desired surface, applying pressure for about 30 seconds to secure it in place.</li><li>Wait for the adhesive to set fully — it's recommended to wait at least an hour before hanging items.</li></ol><h3>Print settings:</h3> Use TPU. For optimal performance and to prevent the base of the hooks from bending, it is recommended to print these hooks with a 100% infill setting. This will ensure that the hooks are completely solid, providing maximum stability and support for hanging objects.

The Only Hooks You'll Ever Need: Flexible TPU Hooks for Ultimate Versatility

Household

Matthew Ghost

NEW IMPROVED VERSION <a target="_blank" href="https://makerworld.com/en/models/415150#profileId-317228" rel="nofollow noopener">TILT PHONE STAND V3.0</a> 🥳&nbsp;At the request of your reviews, I modified the knob to make it more ergonomic and easier to turn. You can find it in the new profile.<figure class="image image_resized" style="width:30.92%;"><img src="https://makerworld.bblmw.com/makerworld/draft/818850/2024-01-18_5dfa8f97b509d.jpg"></figure>The stand allowing you to comfortably and securely hold your mobile phone at the optimal viewing angle.<ul><li>It is not necessary to glue the parts here. Everything is printed in one piece.</li><li>There is an improved guide groove that does not allow slipping.</li><li>The gears fit together better, which allows for more comfortable tilting.</li><li>The adjustable gear contains a groove, which allows the exact position of the gears.</li><li>No gluing is needed here</li><li>Smooth design</li></ul>When first installed, it is possible that the gear will be tight in the base. It is necessary to turn the adjustable gear a few times so that the gear has a smooth movement.

TILT PHONE STAND V2.0

Phone Holders

svest1466

100mm flat USMC coaster. Oriented face down for better quality. Based off a similar model of a lightbox. Let me know what you think Thanks! set to 1.04 flow rate to get all the cracks.

USMC Coaster

Coasters & Signs

MichaelRousseau3D

hi ,&nbsp;here is a bucket for the A1 mini i design :)perfect fit just push it and it stay there !&nbsp;files are available for single and multicolor also the STL is availble.&nbsp;if you like it please like , comment and follow me for more model !check my account for more print model :D&nbsp;Thank you

A1 Mini Bucket 

A1 Mini

TheMumbl3r

Here is a simple hat bill shaper.Two different curvesOne straight slot to make it flat again. You can use a steamer to steam the hat to help keep the form longer.If you print it, please rate it and post a picture. Thank you.

The Hat Shaper 

Clothing

Romwba3D

A Cute Xmas Penguin split for multi-colour printing, also split to enable printing with just one AMS or all in one with more than one AMS.&nbsp;i have also included a single colour STL file single colour or resin printing&nbsp;I have uploaded 3mf Print profiles for both a single plate all in one print and split for Multiple plates for single AMS Printing with 4 Colours&nbsp;These are part of My Patreon <a target="_blank" href="https://www.patreon.com/romwba3d" rel="nofollow noopener">https://www.patreon.com/romwba3d</a>&nbsp;Please note the Multi Colour RAW STL Files are designed to be printed all at once by importing into your slicer as a Muli STL and not printed seperatly and glued togeather. If you print them that way they may not fit correctly&nbsp;You can view all the Available Models - now over 250 on https://www.romwba3d.com

Xmas Penguin

Gags & Toys

K2_Kevin

<h2 style="text-align: center">Bambu Labs 6 Piece Tool Set</h2><a target="_blank" href="https://makerworld.com/en/models/478965#profileId-390252" rel="nofollow noopener">NEW LABELED Version now available HERE!</a><img class="image_resized" style="width: 33.01%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-05-30_cafe0726686af.png"><figure class="table" style="width: 100%"><table class="ck-table-resized" style="background-color: hsl(90, 75%, 60%); border: 4px groove hsl(120, 75%, 60%)"><colgroup><col></colgroup><tbody><tr><td style="text-align: center">Don&#39;t forget to Follow! Thank you so much for your Downloads, Like and BOOSTS!</td></tr></tbody></table></figure><figure class="table"><table style="border: 2px solid hsl(0, 0%, 60%)"><tbody><tr><td>Included Tools:<ul><li>AMS Power Cable Disconnect - Pushes the hidden clip that is facing printer on the AMS Buffer &amp; Hub.</li><li>AMS HUB PTFE Disconnect - Remove PTFE tube from the Bambu Lab AMS Hub (Smaller than Buffer)</li><li>AMS BUFFER PTFE Disconnect - Remove PTFE tube from the Bambu Lab AMS Buffer (Larger than Hub)</li><li>Buffer Outlet Fork - Fits between spring (through the slot, no need to remove buffer/hub) and slide/push on the PTFE coupler in the AMS Buffer/Hub. Also works great for PTFE removal on hotend and AMS.</li><li>2x Hotend Wire Disconnects - If you need a helping hand removing the Bambu Hotend/Nozzle Connectors.</li></ul></td></tr></tbody></table></figure>&nbsp;If you want to up your cool game, use 6x3mm Magnets. Pay close attention to the magnets polarity (all bottoms face same direction/polarity). They&#39;re designed to fit magnets snugly, but you might need a little glue for some of them.<h3>NEW TOOL SET HOLDER: <a target="_blank" href="https://makerworld.com/en/models/105024#profileId-112080" rel="nofollow noopener">https://makerworld.com/en/models/105024#profileId-112080</a></h3><figure class="table"><table style="border: 2px dashed hsl(0, 0%, 90%)"><tbody><tr><td>Example usage:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/bda22def-b638-4952-8963-d468f39e906e.webp"></td></tr></tbody></table></figure>&nbsp;<h3>Checkout some of my other models…</h3><a target="_blank" href="https://makerworld.com/en/models/478965#profileId-390252" rel="nofollow noopener">https://makerworld.com/en/models/478965#profileId-390252</a><a target="_blank" href="https://makerworld.com/en/models/478965#profileId-390252" rel="nofollow noopener"><img class="image_resized" style="width: 52.2%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-06-03_450eebd518686.png"></a><a target="_blank" href="https://makerworld.com/en/models/472091#profileId-381848" rel="nofollow noopener">https://makerworld.com/en/models/472091#profileId-381848</a><a target="_blank" href="https://makerworld.com/en/models/472091#profileId-381848" rel="nofollow noopener"><img class="image_resized" style="width: 52.84%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-05-30_20146411d27.png"></a><a target="_blank" href="https://makerworld.com/en/models/105024#profileId-112080" rel="nofollow noopener">https://makerworld.com/en/models/105024#profileId-112080</a><a target="_blank" href="https://makerworld.com/en/models/105024#profileId-112080" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-05-30_853680d87f4e1.png"></a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/81622#profileId-86911" rel="nofollow noopener">https://makerworld.com/en/models/81622#profileId-86911</a><a target="_blank" href="https://makerworld.com/en/models/81622#profileId-86911" rel="nofollow noopener"><img class="image_resized" style="width: 52.89%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-01-25_2082d4a4681bf.png"></a><a target="_blank" href="https://makerworld.com/en/models/131156#profileId-142275" rel="nofollow noopener">https://makerworld.com/en/models/131156#profileId-142275</a><a target="_blank" href="https://makerworld.com/en/models/131156#profileId-142275" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-06-03_f618df312f7da.png"></a><a target="_blank" href="https://makerworld.com/en/models/152636#profileId-166673" rel="nofollow noopener">https://makerworld.com/en/models/152636#profileId-166673</a><a target="_blank" href="https://makerworld.com/en/models/152636#profileId-166673" rel="nofollow noopener"><img class="image_resized" style="width: 52.7%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-01-25_de1a3154efbf3.png"></a>&nbsp;&nbsp;&nbsp;This original disconnection tool inspired an entire line: https://www.printables.com/model/382058-bambu-ams-disconnect-tool

Bambu Tools - Bambu Lab Tool Set -Disconnect Tools

Fixumdude

Introducing the FDM (Fixum Dude Motors) print in place Jeep.&nbsp;Prints without supports. Samples are printed in PLA with 0.2 layer height, at least 3 perimeters, and 10%-15% gyroid infill. Examples printed in PolyMaker Silk Chrome PLA, Eryone Dual Color Blue/Green Silk PLA and an unknown gold silk PLA.

Fixum Dude Motors PIP Jeep 

Cars

L3thality

I remixed this snap-on clone of the solder buddy to utilize two 10x3 magnets, so that it is magnetic just like the OG Snap-on one is!! You will need to print two of the cams.

Snap-On Solder Buddy With Magnets

Tools

Vozfrank

Device for safely opening cans. If you need to open a can and don't want to break your fingernail or cut yourself, this handheld device will help you open the can safely without injury.