it works

tourbillon

luukluuk12

Reupload from my printables upload. &nbsp;This is a remix of thrutheframe's X1 gridfinity baseplate. I removed to screen and button cutouts and added some more gidfinity squares in the new space. I also moved to 15x20mm button to the front and added some bambulab branding.Note that the fit around the AMS is very tight, but after making sure the joint between the two halves was good it fit well for me (I used ca glue and 2 screws). I thought it might slide around without the screen to hold it in place, but the <a target="_blank" href="https://www.printables.com/model/399054-gridfinity-faceplate-for-bambu-lab-p1p" rel="nofollow noopener">faceplate </a>I have seems to work well to hold it in place together with the AMS. &nbsp;Update 01/09/2023: added a version without the cutouts for the LED and light switch

Bambu Lab P1S Gridfinity Base

gridfinity

ButtalaBuild

The POOP delivery systemis designed to dispose of the purge automatically. There will be another modular system which can be used together with this in print farms in a fully automated manner.&nbsp;A few parts needs to be glued together, such as the shield or the motor mount.&nbsp;The design is still in the development phase, optical adjustments can still follow.&nbsp;There will be soon a new version with a Hardware kit for it. im developing my own hardware kit since Bambulab does not respond :)follow me on TikTok or Instagram for update&nbsp;<a target="_blank" href="https://www.instagram.com/buttalabuild/" rel="nofollow noopener">https://www.instagram.com/buttalabuild/</a><a target="_blank" href="https://www.tiktok.com/@buttalabuild" rel="nofollow noopener">https://www.tiktok.com/@buttalabuild</a>&nbsp;&nbsp;Option A:<ul><li>N20 12V Motor</li><li>12V or 9V Powersupply </li><li>Endstop switch</li></ul><ul><li>Smartphone charger works aswell with an N20 6V 30 - 150 PRM</li></ul>Option B:&nbsp;required parts:<ul><li>Arduino Uno (or other boards)</li><li>Endstop switch</li><li>LEDs (Red and Green)</li><li>N20 12V Motor</li><li>voltage regulator DC/DC</li><li>12V or 9V Powersupply</li><li>wires</li><li>4x M4x45 DIN 912</li><li>IRF520NPbF MOSFET</li><li>10k Ohm Resistor</li></ul>Equipment:<ul><li>Soldering station</li><li>multimeter</li></ul>CODE:&nbsp;// Pin-Nummern für den Endschalter, Motor und LEDsconst int endstopPin = 2; // Endschalter an Pin 2const int motorPin = 9; // Motor an Pin 9const int led1Pin = 4; // LED 1 an Pin 6const int led2Pin = 7; // LED 2 an Pin 7  bool endstopPressed = false; // Variable zur Verfolgung des Endschalterstatusunsigned long lastActivationTime = 0; // Zeitpunkt der letzten Aktivierung des Endschaltersconst unsigned long debounceDelay = 200; // Entprellzeit in Millisekunden  void setup() {pinMode(endstopPin, INPUT_PULLUP); // Endschalter als Eingang mit Pull-Up-WiderstandpinMode(motorPin, OUTPUT); // Motor als AusgangpinMode(led1Pin, OUTPUT); // LED 1 als AusgangpinMode(led2Pin, OUTPUT); // LED 2 als Ausgang&nbsp;// LED 1 einschaltendigitalWrite(led1Pin, HIGH);}  void loop() {// Wenn der Endschalter betätigt wird und dies das erste Mal istif (digitalRead(endstopPin) == LOW &amp;&amp; !endstopPressed &amp;&amp; millis() - lastActivationTime &gt; debounceDelay) {endstopPressed = true; // Endschalter wurde betätigtlastActivationTime = millis(); // Zeitpunkt der letzten Aktivierung speicherndelay(500); // 20 Sekunden warten&nbsp;// Motor für 10 Sekunden einschaltendigitalWrite(motorPin, HIGH); // Motor einschaltendigitalWrite(led1Pin, LOW); // LED 1 ausschaltendigitalWrite(led2Pin, HIGH); // LED 2 einschaltendelay(20000); // 10 Sekunden warten&nbsp;// Motor ausschaltendigitalWrite(motorPin, LOW); // Motor ausschalten&nbsp;// LED 2 ausschaltendigitalWrite(led2Pin, LOW);&nbsp;// LED 1 wieder einschaltendigitalWrite(led1Pin, HIGH);&nbsp;// Warten, bis der Endschalter losgelassen wirdwhile (digitalRead(endstopPin) == LOW) {// Warten auf Loslassen des Endschalters}&nbsp;// Zurücksetzen des Endschalterstatus nach 20 Sekundendelay(500);endstopPressed = false;}}

The POOP delivery system

precision tools

BI8DCR

AMS lite Bowden Clip 

mini

pens

晚西

详情请看B站视频https://b23.tv/7Nriq2f推荐水平拓展-0.1五金m3*12螺丝螺母两套   弹簧0.4*6*20

科幻风折叠短刀   蝴蝶匕

blade

Tylercowen

I waited for a month for the original author to respond wether there will be a V2 for 54mm portafilters, and then decided to make my own. This is not a scaled model, but a re-computed one.<h3>Please follow the original Umikot instructions</h3>Note this is the short version so you need to cut the needle handles. No matter what basket you use, the needles are in 2 lengths - 55mm and 45mm. The way to fit different basket is to adjust the needle depth configuration, which dictates the height of the base part.<h3>Provided configuration</h3>There are various configuraitons provided for you convenience. They are organized by folders. <h3>Other configurations</h3>Please export yourself on <a target="_blank" href="https://cad.onshape.com/documents/4ed8e0cd63f7fd53d8d151ea/v/c049bf0b62bfc4386a22e65d/e/9e8ca6be33363d05ca899d86" rel="nofollow noopener">OnShape</a>. Remember to uncheck Handle groove if you choose anything other than Long Tabs.Note that I made many features available as configurations. So technically it will work for many different sizes.For reference, these are the changes I made.<figure class="image image_resized image-style-align-left" style="width:517px;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000039913/design/ff4a0acf-0a8b-41ef-84b8-46db5a194adc.webp"></figure>

Umikot V2 Breville - Planetary Gear Spirograph WDT

coffee

wuboo

<h2>The AeroGrip 360 Fly Tying Vise</h2>A fly tying vise is a specialized tool used by anglers to create artificial flies for fly fishing. These flies are crafted to mimic the appearance and behavior of insects or other small creatures that fish commonly feed on. The vise holds the hook firmly in place, allowing the person tying the hook to use both hands to attach and secure various materials, such as feathers, fur, and thread, to the hook.&nbsp;The AeroGrip 360 was designed with strength &amp; stability in mind and was printed using PETG filament. All printing profiles are tuned for PETG. I do not recommend using PLA to print this. I do recommend using ABS or a CF type filament for the jaws for extra strength and durability.<h3>Key features include:</h3><ol><li>Jaw Mechanism: The jaws of the vise are designed to securely clamp onto hooks of various sizes. They can be adjusted to accommodate different hook types and sizes.</li><li>Rotary Function: Many modern vises have a rotary function, which allows the user to rotate the hook 360 degrees. This feature makes it easier to apply materials evenly around the hook and inspect the fly from all angles.</li><li>Base: The vise is mounted on a sturdy base (5x7 inches) which has a non-slip pad on the bottom, but I still recommend the use of a clamp(s) when tying. The base also includes extruded slots for organizing small parts.</li><li>Adjustment Mechanisms: These allow the user to fine-tune the position of the hook for optimal access and comfort while tying.</li></ol><h3>Parts list:</h3><ul><li>1x M4-0.7 x 12mm Hex Bolt (3mm head thickness) - Local hardware store</li><li>2x M4-0.7 x 20mm Hex Bolt (3mm head thickness) - Local hardware store (I am using 25mm bolts in the photos; 20mm would look much nicer)</li><li>3x M4-0.7 Hex Nut (3mm thick) - Local hardware store</li><li>1x M5-0.8 x 25mm Hex Bolt (3.5mm head thickness) - Local hardware store</li><li>1x M5-0.8 Hex Nut (3.5 mm thick) - Local hardware store</li><li>1x Non slip pads - <a target="_blank" href="https://www.amazon.com/dp/B0B29NVD8R?ref=ppx_yo2ov_dt_b_product_details&amp;th=1" rel="nofollow noopener">https://www.amazon.com/dp/B0B29NVD8R?ref=ppx_yo2ov_dt_b_product_details&amp;th=1</a></li><li>2x 609 Bearings (designed by Jerryie) - <a target="_blank" href="https://makerworld.com/en/models/34145?from=search#profileId-32671" rel="nofollow noopener">https://makerworld.com/en/models/34145?from=search#profileId-32671</a></li></ul><h3>Assembly instructions:</h3><ol><li>Insert the stand into the base. Put the print bed side as the bottom (the distance for the hole is slightly different than the top hole used for the mount, I&#39;m sorry…).</li><li>Align the hole between the stand and base then insert the 35mm dowel (the largest one). This may require GENTLY tapping the dowel in with a wrench or hammer.</li><li>Add the non-slip pad to the bottom of the base. Set this aside.</li><li>Assemble the arm with ONE 609 bearing designed by Jerryie. Slide the bearing all the way back. Set this aside.</li><li>Insert the M5-0.8 hex nut into the extruded hex slot found on the top part for the mount. This is the dovetailed cut that slides over the top of the mount. Push the hex nut in so it is flush. Set this aside.</li><li>Take the arm and bearing from step 4 and insert it from the back of the mount until the bearing hits the stoppers.</li><li>Put on the back face plate with the snap connectors on the mount to secure the bearing. I recommend using a little bit of glue, be careful to not get any glue on the bearings.</li><li>Insert the second bearing on the arm until it hits the stoppers on the front of the mount.</li><li>Put on the front face plate with the snap connectors on the mount to secure the bearing. I recommend using a little bit of glue, be careful to not get any glue on the bearings.</li><li>Take the dovetailed piece from step 5 and slide this over the top of the mount so it is flush with both sides and the hole in the mount aligns with the hex nut. This may require GENTLY tapping the dovetail in with a wrench or hammer.</li><li>Insert your M5-0.8 x 25mm hex bolt into the tail-design bolt cover and screw into the hex nut on top of the mount.</li><li>Add the mount to the stand with the holes aligned then insert the 20.15mm dowel (the smallest one) to secure the mount to the stand.</li><li>Insert the 32mm dowel in the back of the arm to assist with rotating the arm. Use glue if necessary.</li><li>Insert all 3 M4 hex bolts into the hex bolt covers.</li><li>Insert 2 of the M4 hex nuts into the hollow hex nut covers.</li><li>Insert the last M4 hex nut into the extruded hex slot found on the back side of the main jaw piece.</li><li>The M4-0.7 x 12mm hex bolt is used for the front of the jaw.</li><li>The M4-0.7 x 20mm hex bolts are used to connect the swinging arms to the arm and jaws.</li></ol>&nbsp;

Fly Tying Vise

fishing

ildarcheg

Box: AMMO BOX 9mm AMMUNITION STORAGE 20 ROUNDS AMMO CRATE 9 mm&nbsp;Includes: - base (lower) - lid (upper) - insert - front plate multicolor - front plate single colorMaterials PLA, PETG, ABS, CFMulticolor Vs Single Color If you have a single-color printer like Ender 3 use MONO version (lid and front plate). If you have a multicolor printer like Bambu with AMS use the non-mono version (lid and front plate) and paint in Slicer.&nbsp;<h2>100+ CALIBERS AVAILABLE ON CULTS3D 2 DESIGNS</h2><h2><a target="_blank" href="https://cults3d.com/en/design-collections/ildarcheg/bbox" rel="nofollow noopener">BBOX</a></h2><figure class="image"><a href="https://cults3d.com/en/design-collections/ildarcheg/bbox" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/630573/2024-04-04_2cc9e9200b0068.png"></a></figure>&nbsp;<h2><a target="_blank" href="https://cults3d.com/en/design-collections/ildarcheg/abox" rel="nofollow noopener">ABOX</a></h2><figure class="image"><a href="https://cults3d.com/en/design-collections/ildarcheg/abox" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/630573/2024-04-04_49d3cd51ef544.png"></a></figure>   Following calibers are also available: 9mm 9 mm 40 S&amp;W 40s&amp;w 40sw 45 AUTO 45 ACP 45auto 45acp 6.5 Creedmoor 6.5 CM 243 WIN 243win 5.56 556 NATO 270 WIN 270win 308 WIN 308win 300 BLK 300blk Blackout 8x51R 8x51mm R Lebel 41 REM MAG 41 Mag 6mm ARC 6mm 6.8 REM SPC 6.8spc 224 Valkyrie 224 22-250 REM 22-250rem 450 Bushmaster 450 30-06 SPRG 30-06 Springfield 38 SPECIAL 38 S&amp;W Special 357 MAGNUM 357mag 10mm 10 mm 223 REM 223rem 7.62x51mm NATO 7.62x51 30 Carbine 7.62x33mm FN 5.7x28mm 5.7x28 7.62x39mm 7.62x39 22 LR 22 LR Long Rifle 350 Legend 9x43mm 17 HMR 17hmr 22 WMR 22wmr 44 REM MAG 44 Mag 45 Colt 45colt 6.5 PRC 6.5prc 6mm Creedmoor 6mm 300 WIN MAG 300 win 28 Nosler 28nosler 7MM REM MAG 7mm 6.8 Western 6.8western 380 ACP 380 auto 300 WSM 300wsm 8x57 mm Mauser 8x57mm 8x60 mm 8x60mm 7.5x55mm Swiss 7.5x55 6.5x55mm Swedish 6.5x55 357 SIG 357sig 30-30 WIN 30-30win 9x18 Makarov 9x18mm 7x57mm Mauser 7x57 32 ACP 32 auto 50 AE 50 Action Express Desert Eagle 32 S&amp;W LONG 32 WadCutter 375 H&amp;H Magnum 375 Holland &amp; Holland 9.3x62 mm Mauser 9.3x62mm 300 PRC 300prc 7mm RSAUM 7mm Rem SAUM 500 S&amp;W Magnum  500sw 7.62x54R 7.62x54R Mosin 45-70 GOVT 45-70govt 300 RUM 300RUM 260 REM 260rem 22-243 22-243 Middlestead 44-40 44-40 WCF Winchester 280 REM 280 Remington 458 SOCOM 458socom 303 BRITISH 303british 25-06 REM 25-05rem 280 ACKLEY 280 AI 338 LAPUA 338lapua 338 WIN MAG 338winmag 220 SWIFT 220swift 32 French 7.65×20mm Long 7mm-08 Remington 7mm08 9.3x74R 9.3x74mm 7x64mm 7x64 mm 300 Savage 300savage 444 Marlin 444marlin 35 Whelen 35whelen 460 S&amp;W Magnum 460SW 454 Casull 454casull 6.5 Grendel 65grendel 270 WSM 270wsm 8x68S 8x68 S 26 Nosler 26nosler 300 WBY MAG 300 Weatherby Magnum 256 WIN 256 Winchester Magnum 7mm PRC 7mm PRC 25 ACP 25ACP 222 REM 222rem 300 NORMA MAG 300 NORMA MAGNUM 6mm Dasher 6mm 410 ga 410 ga 22 Hornet 22 hornet 38-55 Win 38-55 WCF 7x33 Sako 7x33 6mm XC 6mmXC 375 Ruger 375Ruger 7mm BR Rem 7mm Benchrest Remington 22 Savage 22savage 250 Savage 250Savage 7mm WSM 7mm 30-40 Krag 30 US Army 50 Beowulf Beowulf 7.62x25 Tokarev 7.62×25mm Tokarev Custom Lids Feel free to reach me if you are interested in custom lids--------- ammo box, ammo crate, ammo storage, ammunition box, ammunition storage, ammunition crate, 3d print, stl, 3d model, 9mm, 9 mm

9mm ammo box ammunition storage 20 rounds BBOX

ammo

DKprints

Suzuki Jimny model! This is a fairly high detail model of the new Suzuki Jimny. Designed to be printed with 4 different colors in the AMS. Prints flat and press fits together after removal from the frame. Can either fasten together with an adhesive, or leave as a press fit model. Can cut the parts out with flush cutters or a hobby knife and assemble by referencing the pictures for the placement and orientation of the parts. Optional side mirrors can be glued on if you really want that scale look. Parts can be somewhat tough to fit, but once they're in place, the model is super strong. Happy Printing!

Suzuki Jimny Kit Card

kit card

BrianS2K06

By printing the Jeep kit map, roof, trailer, Howitzer, and ammo crates, I created a simple box to fit all the stuff inside. The cover is held in place by 4 small clips.&nbsp;Printsettings:No support No raft 0,2mm layer height

Box for the Jeep Kit Card with accessories

jeep

Josh-3D

A set of Mini Cansters! Previously I made a set of <a target="_blank" href="https://makerworld.com/en/models/161251#profileId-177000" rel="nofollow noopener">Sci-Fi inspired canisters</a>. They were big, they were cool, but the smaller of the models weren&#39;t as practical because of some of the proportions. The aim here was to shrink the model overall, going from using M4 screws down to M3 screws. A number of tweaks were made along the way to tighten tolerances up even further.&nbsp;<figure class="image image_resized" style="width:39.39%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000446925/design/2024-04-28_7e95db4246c17.png"></figure>&nbsp;Assembly and Parts needed&nbsp;Hardware:8 x M3x16mm (Or longer) screws&nbsp;Assembly should be pretty straight forward. Just screw the ends on and call it a day.&nbsp;-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you&#39;re looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information.&nbsp;

Mini Canisters

达文西FPV

我只用必应PETG-LS打印测试过,必要时可以用胶水涂到打印面板,我是新手,打印配置大家可以自己尝试,有问题留言!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/534342/2024-02-14_8b8792c35647f.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/534342/2024-02-14_50e8e9d56bf47.jpg"></figure>&nbsp;

乐器洞箫2.0版本Musical Instrument G Tone Flute 2.0 Version

music

Soap_Warrior

这是一把香蕉长刀，他与我之前发布的香蕉爪刀原理和形状相似，安装需要使用直径10mm，厚度2mm的圆柱形磁铁。打印不需要支撑，没有AMS的A1mini也能打印，banananana！！！This is a banana long knife, it is similar to the principle and shape of the banana claw knife I posted before, and the installation requires the use of a cylindrical magnet with a diameter of 10mm and a thickness of 2mm. Printing does not require support, and the A1mini can print without AMS, banananana!!!<figure class="image image_resized" style="width:42.59%;"><img src="https://makerworld.bblmw.com/makerworld/draft/793616/2024-03-31_7a7dec75d8f44.gif"></figure>安装教程：与我之前发布的香蕉爪刀安装过程一致。可参考：<a target="_blank" href="https://makerworld.com/zh/models/400018#profileId-301518" rel="nofollow noopener">香蕉爪刀-Banana claw knife 来自 Soap_Warrior - MakerWorld</a>（偷个懒）Installation Tutorial: Consistent with the Banana Claw Knife installation process I posted earlier. See also:<a target="_blank" href="https://makerworld.com/zh/models/400018#profileId-301518" rel="nofollow noopener">香蕉爪刀-Banana claw knife 来自 Soap_Warrior - MakerWorld</a>&nbsp;

香蕉长刀-Banananana knife

true classic

Basti85

<h2>Great NEWS → <a target="_blank" href="https://makerworld.com/en/@kevin.toegel" rel="nofollow noopener">Kevin</a> created a fully customizeable OpenSCAD LID for this project :) You can find it <a target="_blank" href="https://makerworld.com/en/models/496996#profileId-411368" rel="nofollow noopener">here</a></h2><figure class="image image_resized" style="width: 25.99%"><a href="https://makerworld.com/en/models/496996#profileId-411368" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139694/design/2024-06-15_24a92cae9bc47.jpg"></a></figure>&nbsp;&nbsp;Hi guys,&nbsp;many of you printed my V1 &amp; V2 silica boxes. I decided to rework the boxes to fit almost ALL spools! ALL SPOOLS?! REALLY?? HOW??&nbsp;..by your participation :) (a 2 minute effort only &amp; you can earn points!)&nbsp;The idea is simple → one BASE (45mm diameter) various LIDs (custom for each spool)!&nbsp;The V1 &amp; V2 Boxes were able to be filled with 100g silica. This is pretty cool but maybe a bit too much :P So I reduced the size, improved the print by reducing complexity and using thicker walls, reduced the print time AND designed a LID template which can be edited by YOU.&nbsp;How?<ul><li>Download the Fusion 360 file from the RAW models and open the file in fusion.</li><li>Measure the hole of your spool</li><li>Open the only sketch in the file and change the value from 54.9 (Bambu loose fit!) to your size.</li><li>Export via printing option</li><li>DONE</li></ul>Bonus:<ul><li>Open the 3mf</li><li>Place the lid this way</li></ul><figure class="image image_resized" style="width: 27.01%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139694/design/2024-01-14_bebf0454ae6b2.png"></figure><ul><li>use 0.2mm Standard</li><li>change all to concentric</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139694/design/2024-01-14_9111f3491c80e.png"></figure><ul><li>save</li><li>upload the file here as print profile. DONT FORGET to name the profile this way → ProducerName - Type [LID] DiameterInMM. maybe add some description. please ensure to add only spools that are not listed yet!</li></ul>Here the whole process as GIF (realtime!)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139694/design/2024-01-17_7b0265535ac1c.gif"></figure>I&#39;m very curious how many of you guys will participate in this community project :)&nbsp;THX to everybody in advance!BR,B@sti

[Community Project] Silica Spool Dry Box

utility

BrewBoy

Plinker V2.0 (Bolt-Action Blaster):&nbsp;The second entry in my shell-ejecting plinker series. The V2.0 features a bottom loading magazine and functional rails for mounting accessories, STEP files are included if you would like to make your own adjustments or parts. This is an ongoing work in progress as I continue to make improvements and different accessories to allow for lots of different customizations.&nbsp;Only requires a nuts, bolts &amp; a few springs (<a target="_blank" href="https://www.aliexpress.com/item/1005002523758634.html?aff_platform=true&amp;aff_short_key=UneMJZVf&amp;isdl=y&amp;src=bing&amp;pdp_npi=3%40dis%21CAD%211.49%211.49%21%21%211.88%21%21%40%2112000021005031078%21ppc%21%21&amp;albch=shopping&amp;acnt=135095331&amp;isdl=y&amp;albcp=412811419&amp;albag=1311717734383599&amp;slnk=&amp;trgt=pla-4585581970548950&amp;plac=&amp;crea=81982433154568&amp;netw=o&amp;device=c&amp;mtctp=e&amp;utm_source=Bing&amp;utm_medium=shopping&amp;utm_campaign=PA_Bing_CA_PC_customlabel1&amp;utm_content=customlable1%3D7&amp;utm_term=aliexpress%20305mm%20spring&amp;msclkid=91572ea3b6a41a4e20b94b3fbac2f23b" rel="nofollow noopener">305mm Compression Spring Wire Dia 0.3 0.4 0.5 0.6 0.7 0.8 1 - 5mm Outer Dia 3 3.5 4 4.5 5 5.5 6 7 8 10 12 - 60mm Length 305 mm (aliexpress.com)</a>) ***This link may not work in your region. Check the assembly guide for the required spring dimensions to help you find ones in your area.&nbsp;Firing Video: <a target="_blank" href="https://www.reddit.com/r/3Dprinting/comments/1bu5t05/plinker_v20_boltaction_toy_blaster/" rel="nofollow noopener">Plinker V2.0, bolt-action toy blaster : r/3Dprinting (reddit.com)</a>&nbsp;Please check out the Assembly Guide PDF for parts list and assembly Instructions. Short version has identical parts requirements and assembly, some parts may appear slightly different between versions.&nbsp;Check out the Targets and Ammo box I made for the Plinker V2.0: <a target="_blank" href="https://makerworld.com/en/models/441802#profileId-347641" rel="nofollow noopener">Ammo Box &amp; Targets for Plinker V2.0 by BrewBoy - MakerWorld</a>If you enjoyed this model then you will probably like my pump-action launcher: <a target="_blank" href="https://makerworld.com/en/models/229678#profileId-265500" rel="nofollow noopener">Pump-Action Plinker (Toy Launcher) by BrewBoy - MakerWorld</a>&nbsp;DRY FIRING MAY CAUSE THE BOLT TO BREAK.&nbsp;UPDATE (APRIL 17, 2024):<ul><li>Added Raw model files for long rifle version with a telescopic stock (Print profile and additional build info coming soon).</li><li>Small Updates to Build Guide.</li></ul>UPDATE: (APRIL 26, 2024):<ul><li>Added raw model files and print profile for two new accessories: Tactical Scope 0x &amp; Angled Foregrip</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000410146/design/2024-04-25_02ebb05dd0f38.png"><figcaption>Side View - X-ray Internal Assembly.</figcaption></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000410146/design/2024-04-17_a4c948f52ba57.png"><figcaption>Best Orientation for Printing</figcaption></figure>

Plinker v2.0 (Bolt-Action Blaster)

shooter

EEEEEE

<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000451625/design/2024-05-02_fca96dd1e2ab8.gif">The model prints in PLA at 100% infill in 45 minutes. &nbsp;There are two parts, the plane and wing. Remove both from the bed, being careful not the bend anything. The main structures of both wings will be facing towards the back wings at a 2.5 degree angle, make sure that the seperate wing is facing the right way when assembled. &nbsp;To assemble, place the wing on a flat surface with the connections facing up. Carefully but forcefully press the plane down onto the center connection of the wing until it locks into place, and there is no gap between the connection and the plane. Pick up the wing with the plane attached and carefully press the 4 side connections into their respective slots, making sure not to bend the plane&#39;s wing. The tolerances are very close to ensure that the plane doesn&#39;t come apart during flight.&nbsp; Next, fold up the two stabilizers fully and lightly fold up the elevators 15-25 degrees as shown in the GIF. Give the plane a light test throw like a dart. If it veers to one side, you didn&#39;t connect the wing carefully enough. This can be fixed by finding the bend in the wing and trying to correct it. If it flies straight, but goes up and then down, lower the elevators. You can optionally fold up the four ends of the wings slightly to change the look of the plane and increase its horizontal stability (Helps with incorrectly connected wing).&nbsp;A textured PEI plate or glue is recommended, as the N shapes on the separate wing are difficult to print. This model slightly trades off the ease of use of previous models for much better looks, and while it can outperform v4, it was not specifically designed to. It took many iterations to fine-tune the tolerance and performance of the plane.

Flying Biplane/Glider v5

glider

uhltimate

Create your own OTF (Out-The-Front) fidget knife with just three 3D printed parts! This compact design is perfect for restless hands, providing smooth OTF action for endless fidgeting fun. Watch my YouTube video for assembly instructions and start printing your own today!&nbsp;Update:01.05.2024 - Added a guided Blade Version with a stronger locking mechanisms.02.05.2024 - Added a comb Version as alternative.&nbsp;Features:<ul><li>Three easy-to-print parts</li><li>Smooth OTF action</li><li>Portable design for on-the-go fidgeting</li></ul>Instructions:<ol><li>Print the three parts.</li><li>Follow our assembly video.</li><li>Enjoy your custom OTF fidget knife!</li></ol><figure class="media"><div data-oembed-url="https://youtu.be/IQcEFHvocRc"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/IQcEFHvocRc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

OTF Fidget Knife - only 3 Parts

fun stuff

JayRay

This is the original #3DBenchy directly from Creative Tools. Not a download of a download, nor all the slightly modified versions found elsewhere (ie, BambuLab Studio, Printables, etc…)&nbsp;I would like to introduce the #3DBenchy to Maker World. During the close beta period, there was no #3DBenchy available to send to the printer from the phone app so I uploaded it here. &nbsp;Please add your profiles as you see fit for the community to use to run tests. Thanks!&nbsp;Community members have provided a ton of different profiles. I hope you find one that fits your testing needs. Remember, a bad Benchy print could mean your filament calibrations are off, or a sign of mechanical error (for Bambu Printers.)&nbsp;All models uploaded and the below content is extracted from 3Dbenchy.com.<figure class="media"><div data-oembed-url="https://youtu.be/_epwuDI9FBI"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/_epwuDI9FBI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;<figure class="image"><a href="http://www.3dbenchy.com/features/" target="_blank" rel="nofollow noopener"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/3DBenchy__Low-slope_surfaces_1-300x300.png"></a></figure>#3DBenchy is designed to offer a large array of challenging geometrical features for 3D printers, and touch on different issues related to additive manufacturing.The 3D model is designed to print at 1:1 scale without support materials. It is challenging for most 3D printers but the small volume (15.55 cm3) typically prints in well under two hours and does not require much material.The different surfaces of the #3DBenchy model reveal typical issues regarding surface finish, model accuracy, warping, etc.Visit <a target="_blank" href="http://www.3dbenchy.com/sample-page/features/" rel="nofollow noopener">this link</a> to see a complete list of each feature and correspondent descriptions.<figure class="image"><a href="http://www.3dbenchy.com/dimensions/" target="_blank" rel="nofollow noopener"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/3DBenchy_about_features-300x287.png"></a></figure>Use #3DBenchy to test and calibrate your 3D printer by adjusting hardware and software settings for optimal results.The shape and size of this 3D model is designed to challenge 3D printers. Compare your #3DBenchy results with the dimensions illustrated in <a target="_blank" href="http://www.3dbenchy.com/dimensions/" rel="nofollow noopener">this link</a>. These are easy to measure with a caliper.Print and check your 3D-printer’s result for dimensional accuracy, tolerances, warping and deviations related to changes in printing parameters and material types.&nbsp;<h2>Features</h2><figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/3DBenchy_page_features_main_image.png"></figure>#3DBenchy is designed to offer a large array of challenging geometrical features for 3D printers, and touch on different issues related to additive manufacturing.The 3D model is designed to print at 1:1 scale without support materials. It is challenging for most 3D printers but the small volume (15.55 cm3) typically prints in well under two hours and does not require much material.The different surfaces of the #3DBenchy model reveal typical issues regarding surface finish, model accuracy, warping, etc.Please see a complete list of each feature and correspondent descriptions below.&nbsp;<h2>The Hull</h2>The hull is a large, smooth overhanging curved surface that is challenging to 3D-print, and clearly reveals any surface deviations.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_hull_curved_overhang-300x300.png" alt="Feature_hull_curved_overhang"></figure>&nbsp;<h2>Symmetry</h2>#3DBenchy is perfectly symmetrical which makes any skewness and warping easy to detect.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_symmetry-300x300.png" alt="Feature_symmetry"></figure>&nbsp;<h2>High-Resolution STL file</h2>The STL file is triangulated at a very high resolution which yields smooth surfaces. The maximum deviation from the original CAD file is set to 0.001 mm.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_high-res_stl_mesh-300x300.png" alt="Feature_high-res_stl_mesh"></figure>&nbsp;<h2>Planar Horizontal Faces</h2>The top surfaces of the deck, box and chimney are planar, horizontal and parallel to the bottom plane.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_planar_horizontal_faces-300x300.png" alt="Feature_planar_horizontal_faces"></figure>&nbsp;<h2>Tiny Surface Details</h2>If you have a high-resolution 3D printer, this is where you can shine! The letters on the stern are less than 2 mm tall and the thickness of #3DBenchy’s nameplate is just 0.1 mm.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_3DBenchy_nameplate_tiny_detail-300x300.png"></figure>&nbsp;<h2>Cylindrical Shapes</h2>The chimney is designed to define concentrical cylindrical shapes with inner and outer diameters. These clearly show deviations in roundness.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_conentrical_cylindrical_shapes-300x300.png" alt="Feature_conentrical_cylindrical_shapes"></figure>&nbsp;<h2>Overhang Surfaces</h2>Overhang issues are the Achilles’ heel of 3D printing. #3DBenchy offers several challenging areas such as in the difficult-to-reach inside of the bridge.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_overhang_bridge-300x300.png" alt="Feature_overhang_bridge"></figure>&nbsp;<h2>Low-Slope-Surfaces</h2>Low-slope-surfaces clearly show the layered structure of 3D printing. If printed horizontally, #3DBenchy’s gunwale and roof of the bridge will reveal the layer-steps.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_low-slope-surfaces-300x300.png" alt="Feature_low-slope-surfaces"></figure><h2>Large Horizontal Holes</h2>The rear window offers a large circular horizontal hole and the boat’s wheel offers a round difficult-to-reach secluded feature.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_large_horizontal_hole-300x300.png" alt="Feature_large_horizontal_hole"></figure>&nbsp;<h2>Small Horizontal Holes</h2>The hawsepipe represents a small short horizontal hole and has a very thin flange against the hull.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_hawsepipe_small_hole-300x300.png" alt="Feature_hawsepipe_small_hole"></figure>&nbsp;<h2>Slanted Small Holes</h2>The fishing-rod-holder provides a very small slightly-slanted blind hole.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_fishing-rod-holder_slanted_small_hole-300x300.png" alt="Feature_fishing-rod-holder_slanted_small_hole"></figure>&nbsp;<h2>First-Layer-Details</h2>The shallow letters at the bottom of the boat clearly reveal typical first-layer-squashing.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_shallow_letters_bottom_plate-300x300.png" alt="Feature_shallow_letters_bottom_plate"></figure><h2> License</h2><figure class="image"><a href="http://www.3dbenchy.com/wp-content/uploads/2015/04/3DBenchy_frontpage_slider_sea_v041.jpg" target="_blank" rel="nofollow noopener"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/3DBenchy_frontpage_slider_sea_v041-1024x402.jpg"></a></figure>&nbsp;#3DBenchy by <a target="_blank" href="http://creative-tools.com/" rel="nofollow noopener">Creative-Tools.com</a> is licensed under a <a target="_blank" href="http://creativecommons.org/licenses/by-nd/4.0/" rel="nofollow noopener">Creative Commons Attribution-NoDerivatives 4.0 International License</a>. Permissions beyond the scope and typical usage examples are explained below.&nbsp;<h2>Feel free to …</h2><ol><li>… download the <a target="_blank" href="http://www.3dbenchy.com/download/" rel="nofollow noopener">#3DBenchy STL file</a> and 3D-print it as you please.</li><li>… give away and even sell 3D-prints of the <a target="_blank" href="http://www.3dbenchy.com/download/" rel="nofollow noopener">#3DBenchy STL file</a>.</li><li>… <a target="_blank" href="http://www.3dbenchy.com/share/" rel="nofollow noopener">publish</a> images and videos of your 3D-prints – you own them!</li><li>… redistribute the unmodified <a target="_blank" href="http://www.3dbenchy.com/download/" rel="nofollow noopener">#3DBenchy STL file</a> as you please. Such as hosting your own downloads, attaching to emails, including the file on DVDs, USB-sticks, and in software distributions, bundling the STL or pre-sliced print file with 3D printer kits, etc.</li><li>… experiment, be inventive and creative! We made #3DBenchy as a tool for playing around with and testing 3D printers. Improve your skills and challenge your machine and its software. Try every setting, variation and material you can think of!</li><li>… modify #3DBenchy for personal use. Feel free to publish texts, images and videos of your experimentation (these are your work and you own them!). Please respect the above list items regarding not distributing modified STL files of #3DBenchy.</li></ol><h2>Consistency</h2>#3DBenchy is designed to be a calibration tool for testing 3D print settings and comparing the performance of different 3D printers. Therefore it is important that the same unmodified <a target="_blank" href="http://www.3dbenchy.com/download/" rel="nofollow noopener">STL</a> file is consistently used for this purpose.<h2>Attribution</h2>We designed the little #3DBenchy boat and this expanding web page to help 3D printer operators on this planet to better navigate the vast sea of 3D printing possibilities!It is also meant to be a fun object to experiment with and discover 3D printing. If you enjoy #3DBenchy and the content on this site, please give us attribution in your publishings. Simply include the word <a target="_blank" href="https://www.google.se/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=%233dbenchy" rel="nofollow noopener">#3DBenchy</a> and the URL <a target="_blank" href="http://3dbenchy.com/" rel="nofollow noopener">3DBenchy.com</a>. The team behind #3DBenchy highly appreciates your help!

BENCHY

test models

agepbiz

Assembly video: <figure class="media"><oembed url="https://www.youtube.com/watch?v=6n7tGLCy-1o"></oembed></figure>&nbsp;Print in place kit-card toy. Use a pair of flush cutters to separate the parts then assemble the toy. I have included both a single color version and a multicolor version.&nbsp;The Jeep Kit Card: <a target="_blank" href="https://makerworld.com/en/models/223303#profileId-241285" rel="nofollow noopener">https://makerworld.com/en/models/223303</a> The Trailer: <a target="_blank" href="https://makerworld.com/en/models/428258#profileId-332362" rel="nofollow noopener">https://makerworld.com/en/models/428258</a>The Gun:<a target="_blank" href="https://makerworld.com/en/models/469311#profileId-378676" rel="nofollow noopener">https://makerworld.com/en/models/469311</a>&nbsp;Subscribe or follow me on: Instagram: <a target="_blank" href="https://www.instagram.com/agepbiz/" rel="nofollow noopener">www.instagram.com/agepbiz</a> YouTube: <a target="_blank" href="https://www.youtube.com/user/agepbiz" rel="nofollow noopener">www.youtube.com/user/agepbiz</a> Twitter: <a target="_blank" href="https://twitter.com/agepbiz" rel="nofollow noopener">www.twitter.com/agepbiz</a>&nbsp;WARNING: CHOKING HAZARD - Small parts Not for children under 3 yrs.&nbsp;Printsettings: No support No raft 0,16mm layer height

Trailer for the Jeep Kit Card

r c

ManuZiloop

Here is my new model that allows the evacuation of filament waste through a small slide and sends it towards the trash.&nbsp;Some users ask me a version with magnets, I will do it soon.&nbsp;*** If you like my design, please give it a “BOOST” (click on the button) ***