ippaku

fay3dlab

So i just got myself the LED lamp kit and was looking for a cool lamp shades to print for it.. then i came across someone making a incubator like cylinder with an alien in the middle using resin.. i thought it was a great idea.. and so i design one for myself.. but of cause i want to make a suspended version of it.. Then i remembered finding a baby raptor model on makerworld.. it was made for resin printing.. so i low-poly the raptor and added the baby raptor blue and turned it into a suspended model.. i had to split the raptor in 2 and added supports to the hanging hands.. legs and tail.. so it might look weird if you look closely..&nbsp;<figure class="table"><table><tbody><tr><td>:UPDATE: it turns out that the user who shared the raptor model on makerworld is not the owner of the 3D model.. he shared the file without authorization.. The owner reached out to me and told me what the user had done.. the owner of the 3d model is <a target="_blank" href="https://www.turbosquid.com/Search/Artists/wofle" rel="nofollow noopener">wofle</a> from turbosquid.com.. and he gave me permission to share my remixed version of the raptor as long i dont sell it commercially.. so thank you Mr Wolfe for sponsoring your awesome raptor model for my suspended models..</td></tr></tbody></table></figure> i modelled the incubator using Tinkercad and added the LED kit on the bottom.. so the LED light would shine through the bottom grill of the incubator cylinder and light the suspended baby raptor in the middle..<img src="https://makerworld.bblmw.com/makerworld/draft/681411/2023-12-15_2b30871ab39c9.gif"> If you have an AMS i recommend printing some of the incubator parts with transparent filament like i did for the bottom base.. so that the LED would shine through it and make it more cool.. in my opinion.. Assembly is fairly simple.. you just need to be careful when adding the square peg into the raptor's body.. it should fit loosely.. the peg is just used to hold the 2 half of the raptor aligned.. the bottom parts should fit tight.. and the top slightly loose.. the base where you insert the LED kit should fit loosely to the middle base.. so that you can turn your raptor to whichever position you'd like without the wires in the way..  <blockquote>If you're thinking of buying the LED kit.. please do support me by using my affliate link here.. <a target="_blank" href="https://shrsl.com/4g18i" rel="nofollow noopener">LED LAMP KIT 001</a> every little things helps me out..</blockquote><figure class="table" style="height:162.344px;width:960px;"><table style="background-color:rgb(255, 255, 255);border:1px double rgb(179, 179, 179);"><tbody><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">If you would like to support me, you can join me on my <a target="_blank" href="https://www.buymeacoffee.com/fay3dlab" rel="nofollow noopener">buymeacoffee</a> page..</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">By joining me as a supporter.. you'll be able to get behind the scenes informationon my current projects as well as future projects..</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">And if you're looking to sell my prints.. you can join my merchant membership tier as lowas USD10 a month..</td></tr></tbody></table></figure>

Suspended Baby Raptor Incubator LED Lamp

models

Tech

Printerama

Simple little christmas treeProfiles are in vase mode.The files have a different size depending on the printer modelA1: 179cm highP1/X1: 249cm high&nbsp;If you print them in white or clear they are very nice to light them with some LED tealightsThe A1 version fits perfectly for these usb <a target="_blank" href="https://www.amazon.com/-/de/dp/B0BY9B2WBW/ref=sr_1_8?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=1325WWGV3S5B1&keywords=usb+led+base+wood&qid=1697643867&sprefix=usb+led+base+woo%2Caps%2C171&sr=8-8" rel="nofollow noopener">LED light bases</a>&nbsp;Happy printing!

Christmas tree

holiday

Nakozen

The Imperial AT-ST “Chicken Walker” scouts ahead on the lush moon of Endor, seeking out any potentially rebellious individuals attempting to halt the Emperor's efforts. Fast moving and nimble for its size, and still extremely deadly with a half-decent pilot, it is not something you would want to be caught out in the open with, Jedi or not. Ohhh god is that a teddy bea--aaaarrghkk---!! This is a kit I've been wanting to make properly for a few years now, and finally sat down to give it a real attempt. I hope I have done it justice!-----------------------------------------------Some parts are super small, so some care is required. Additionally the kit should scale up just fine, although untested as of yet!On folding the main body panels, it is okay if one or two panels sheer off, it will still stick together, but if 3 or 4 fail, a little glue may be required for the roof piece! (If this is a big enough issue I may add another connection, I just wanted to preserve the top detailing.)Included is just the regular fit for the time being, try setting outer walls to print first.You can make it EVEN TIGHTER by increasing the Z-scale by 15%. For those uninterested in the card format, there is a frameless variant included! ------------------------------------------------------------Print at 0.2mm layer height, there really is no benefit from printing at a higher resolution and it could affect the fit. Be sure to print with 100% infill for it to hang straight as the weight distribution can be sensitive ------------------------------------------------------------My other Star Wars themed kits:X-WING - <a target="_blank" href="https://www.printables.com/model/143177-x-wing-kit-card-redux" rel="nofollow noopener">https://www.printables.com/model/143177-x-wing-kit-card-redux</a> Y-WING - <a target="_blank" href="https://www.printables.com/model/289165-y-wing-kit-card-redux" rel="nofollow noopener">https://www.printables.com/model/289165-y-wing-kit-card-redux</a> B-WING - <a target="_blank" href="https://www.printables.com/model/143174-b-wing-kit-card" rel="nofollow noopener">https://www.printables.com/model/143174-b-wing-kit-card</a> TIE Advanced - <a target="_blank" href="https://www.printables.com/model/143178-tie-advanced-kit-card" rel="nofollow noopener">https://www.printables.com/model/143178-tie-advanced-kit-card</a> Valen-TIE/N - <a target="_blank" href="https://www.printables.com/model/393740-valen-tien-fighter-kit-card" rel="nofollow noopener">https://www.printables.com/model/393740-valen-tien-fighter-kit-card</a> Tauntaun - <a target="_blank" href="https://www.printables.com/model/143208-tauntaun-kit-card" rel="nofollow noopener">https://www.printables.com/model/143208-tauntaun-kit-card</a> V-19 Torrent - <a target="_blank" href="https://www.printables.com/model/143196-v-19-torrent-kit-card" rel="nofollow noopener">https://www.printables.com/model/143196-v-19-torrent-kit-card</a> Tri-Fighter - <a target="_blank" href="https://www.printables.com/model/143197-tri-fighter-mini-kit-card" rel="nofollow noopener">https://www.printables.com/model/143197-tri-fighter-mini-kit-card</a> Looking to try your hand at making your own Kit Card? Follow this simple guide to get a head-start! <a target="_blank" href="https://3dwithus.com/how-to-design-kit-card-models" rel="nofollow noopener">https://3dwithus.com/how-to-design-kit-card-models</a>------------------------------------------------------------<h3>Interested in selling?</h3>All files are marked as non-commercial along with any remixes created from them.If you are interested in selling physical prints of my models anywhere, be it online or offline, you can obtain a sales license when subscribed to Tier 3 of my Ko-Fi memberships! <a target="_blank" href="https://ko-fi.com/nakozen/tiers" rel="nofollow noopener">https://ko-fi.com/nakozen/tiers</a><h3>Want to show me you love me? Buy me a "coffee"...! <a target="_blank" href="https://ko-fi.com/nakozen" rel="nofollow noopener">https://ko-fi.com/nakozen</a></h3>

AT-ST Walker Kit Card

Star Wars 

Jal Shah

To continue on the previously designed tetrahedron lamp, I designed dodecahedron lamp. I also found tetrahedron lamp to be a bit on a smaller side, so this time I wanted something larger. This lamp is 360mm (≈ 14 inches) tall and 320mm (≈ 12.6 inches) wide and deep.You can use LEDs with this lamp and there is a special frame designed for LED wiring. You can also use E26 \ E27 standard pendant light with this lamp and there is a special insert for that. You also get a stand if you decide to put the lamp on some surface or you can hang the lamp with pendant light.You will also find two types of films this time. One is simple and plane, but the other has numbering on it to make the D12 dice lamp for your gaming room.<h3>Printing</h3>Depending on the version you choose to print, you can refer to the guide below for the number of pieces that need to be printed.<h5>LED Version</h5><ul><li>11 Frame Pieces</li><li>1 Frame with Hole for LED Strip Wire</li><li>12 Insert Pattern Pieces</li><li>12 Insert Films (Pattern 1 or Pattern 2)</li><li>30 Alignment Keys</li></ul><h5>Pendant Light Version</h5><ul><li>12 Frame Pieces</li><li>11 Insert Pattern Pieces</li><li>1 Insert Pattern - For E26_E27 Pendant Lamp</li><li>11 Insert Films (Pattern 1 or Pattern 2)</li><li>1 Insert Film - For E26_E27 Pendant Lamp (Pattern 1 or Pattern 2)</li><li>30 Alignment Keys</li></ul><h5>Stand</h5><ul><li>1 Stand Top</li><li>1 Legs Connector</li><li>5 Legs</li></ul><h3>Assembly</h3><ul><li>Glue \ Press fit inserts into frames.</li><li>I used Vellum paper as the inside backing to diffuse the light. You can print and use either of the inserts for light diffusion as well.</li><li>Stick printed inserts or vellum paper to the inside of the frames.</li><li>Glue all frames together using alignment keys and keeping the bottom side open.</li><li>Finish led work or pendant lamp before inserting the bottom insert. I used pendant light wiring kit myself.</li><li>Lastly attach the bottom panel. I used tacky craft glue to attach the bottom panel to be able to take it off if I need to change the bulb.</li></ul>

Dodecahedron Lamp

decor

papsjundi

When I made / remixed my first Riser, it was out of personal necessity… because the built-in LED in BambuLab was not sufficient… and that Low profile <a target="_blank" href="https://www.printables.com/model/365027-bambulab-top-glass-riser-4-cob-led-remix-with-led-" rel="nofollow noopener">design</a> turned out to be quite popular. Since then, a couple of users <a target="_blank" href="https://www.printables.com/@qiao112_966765" rel="nofollow noopener">Qiao112</a> and <a target="_blank" href="https://www.printables.com/@DanLjungstrom_483192" rel="nofollow noopener">Dan Ljungström</a> encourage me to do the next version that also has a vent on it… they showed me a design from another desinger… which is very good… but I personally like it to be not as tall… So through the rabbit hole I went… gone thru several design ideas… throw away most of them, starting over and over… until I came up with something that I personally like… So here it is… still similar to the first design, it has a TPU Bed/ Light Shield on top but I made several modification from the original design, recognizing issues that was inherent from the first design. <img src="https://media.printables.com/media/prints/584504/rich_content/fa9ed8bb-9d63-4188-89b4-134d95217ae6/all-assembled.png#%7B%22uuid%22%3A%2261d2ae9d-5365-4a41-80e4-3bc4c3ff978d%22%2C%22w%22%3A3036%2C%22h%22%3A1326%7D"> The first design, I angled the LED 60 degrees downward, the problem is, if we do not want to cut the LED strips and do some soldering at the corners, you have to bend the LED strips, it will be very hard to fit them nicely… so in the new desogn, I change the angle to 45 degrees (less bending at the corners) and as a bonus, less overhang… then I added a “cave” (for the lack of a better word) so we can accommodate the “extra” LED to “curl” in there. <img src="https://media.printables.com/media/prints/584504/rich_content/0044983c-307f-41e6-b63d-9fe41dbe5b81/led-cave2.png#%7B%22uuid%22%3A%228f74d6d4-a0e4-4f27-857e-4daec59be023%22%2C%22w%22%3A3090%2C%22h%22%3A1406%7D">A few users remixed the previous design to make the top wall part (LED Trim some call it) thicker, worried that it might brake off… I personally have used this since I first made it, and never had any issues, but I will change the thickness to accommodate that too… This is probably a little more than a casual project, I will try to provide a clear guide… So let's get straight to how to put it together I uploaded a 3mf file that already contains everything you need to print. <img src="https://media.printables.com/media/prints/584504/rich_content/4a1cf25a-16b3-4570-8243-dabb28b84f79/new-3mf-all.png#%7B%22uuid%22%3A%229745d529-884c-4c89-9b31-92456e62b801%22%2C%22w%22%3A2472%2C%22h%22%3A1774%7D">This is a 5 plates project: Plate 1 & 2 are the main body, plate 3 is the cover for the vent holes plus Pegs and Magnet Tool, and the last 2 are all the TPUI printed Plate 1 thru 3 using IIIMax PetG Filament, and 4-5 using BambuLab TPU 95A Black I choose to pick different color for the cover for accent more than anything else, you can choose the same color / materials. ======== Parts you need to buy for this project: 1. 6x2 mm round magnets <a target="_blank" href="https://www.amazon.com/dp/B08R88J55R?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">AMAZON LINK.</a> 2. COB LED Strips with Power Supply and Wireless Remote <a target="_blank" href="https://www.amazon.com/dp/B0BFDQMFPS?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">Amazon Link</a> <figure class="image image_resized image-style-align-left" style="width:35.83%;"><img src="https://media.printables.com/media/prints/584504/rich_content/467eed80-709e-4ef9-b85e-74b3cf4e1822/magnet-tools.png#%7B%22uuid%22%3A%226140a0c1-4760-4af0-b8c4-b06a2d5033cf%22%2C%22w%22%3A1464%2C%22h%22%3A1460%7D"></figure>I also added a couple of Magnet Tools to assist in installing the magnets. We know that magnets will attract if they have opposite polarity, and repels otherwise. I intentionally print these in 2 different colors - 1 color like the body, and the other like the vent cover…. Glue each magnet to the tool, you should install the magnet opposite polarity so when you put them together head to head, they will stick to each other The orange one you will use to install the magnet for the main body, and the beige one for the vent covers ========== After you print all parts.. line up the main body upside down… and you can install the Pegs. Note that there are magnet notches on the pegs, they should be facing outward. You can put SuperGlue also for permanently secure all 4 parts. <img src="https://media.printables.com/media/prints/584504/rich_content/3db39fb3-cf89-448c-8fbe-098dfc34ffd2/install-pegs.png#%7B%22uuid%22%3A%22267dc2cc-3c85-4d8a-9ccd-56463548fbb4%22%2C%22w%22%3A2960%2C%22h%22%3A1484%7D">=============================== <figure class="image image_resized image-style-align-left" style="width:49.87%;"><img src="https://media.printables.com/media/prints/584504/rich_content/45ce78d7-1484-4ab8-abf2-238953077f5e/vent-doors-tpu-install.png#%7B%22uuid%22%3A%2213509f28-fdc5-4516-96e9-213326ae1994%22%2C%22w%22%3A2396%2C%22h%22%3A1584%7D"></figure> Next Glue all 8 of the TPU guard to the Vent Doors. They are different sizes, so match the same ones, and there are 2 rounded guide to help you lined them up. ================================================= Next install the Vent Doors (8 pcs) to the main body. There are different Lengths of the Vent Doors should match the vent. Thet should be inserted at 45 Degrees angle following the gutter. The best way I found is guide the left Hinge first, the middle while pushing 45 degrees, and the right one last… You should hear it clicked once they are in place. <img src="https://media.printables.com/media/prints/584504/rich_content/b46c94ab-14ec-4fd0-8f27-53eae8fc41f5/install-vent-door.png#%7B%22uuid%22%3A%227d04a1b1-132b-4602-a863-27d65ad25e48%22%2C%22w%22%3A2728%2C%22h%22%3A1440%7D"> ========== <figure class="image image_resized image-style-align-left" style="width:51.63%;"><img src="https://media.printables.com/media/prints/584504/rich_content/8e942b37-0152-4a6e-b97e-2c87e5151016/install-magnet-body.png#%7B%22uuid%22%3A%229ab9fefd-f7dd-4f89-a29f-1740454f3905%22%2C%22w%22%3A2836%2C%22h%22%3A1446%7D"></figure> Next, Glue 16 Magnets to the main body, using the Magnet Tool with the same color as the body, this ensure the polarity of the magnets to be facing correctly. <figure class="image image_resized image-style-align-left" style="width:43.3%;"><img src="https://media.printables.com/media/prints/584504/rich_content/69c243ba-f38e-4eb1-b136-18bf8e188179/install-magnet-to-vent-door.png#%7B%22uuid%22%3A%2253e77a39-319e-4309-b08c-f42bd93b5b38%22%2C%22w%22%3A1846%2C%22h%22%3A1554%7D"></figure> Glue 16 Magnets to the (8) Vent Doors (with TPU) using the Magnet Tool with the same color as the Vent Door. Again this is to ensure the polarity of the magnets to be facing correctly. &nbsp;&nbsp;&nbsp;=============================Guide the LED Power Cable through the cable Guide. The TPU Plug was sized slightly wider so that it will be a tight fit and will stay in place. <img src="https://media.printables.com/media/prints/584504/rich_content/b710fba7-2f34-4048-aa66-fd9f8e02998f/cable-hole-plug.png#%7B%22uuid%22%3A%220cc24078-4283-4637-80a3-273870f85a82%22%2C%22w%22%3A2894%2C%22h%22%3A1656%7D">Install the COB LED Strips… note that the LED Strip Sticker may not hold for a long time, you might want to consider gluing them. Lastly install them on your Machine, and put the TPU Shield on top, and finally you can replace the top glass. Below is the youtube video I made, I hope it will make it clearer how to put it together… towards the end of the video… there's a FLIR Video showing the thermal images I sincerely hope you will find it useful. Thank You!<figure class="media"><div data-oembed-url="https://youtu.be/NwnotDQh07c"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/NwnotDQh07c" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;

models

Tech

holiday

Star Wars

decor

Printer Upgrades