iom3ga

Martin

This modular hydroponics tower lets you grow a large amount of plants without the need of lots of room. Each module fits 3x 50mm (2 inch) pots and has the water tube running up the middle. Just stack as many modules as you require.&nbsp;Each module is designed to fit 3 M3x4x5 heat-inserts and bolt together using M3 x 6mm bolts.&nbsp;I designed this to fit on a small 3D printer, with a build area required of 170 x 170.&nbsp;At the bottom of the stack you need the Base with a 16mm barb fitting and the optional base clamp (to clamp to the other side of a container lid) and attach it to a submersible pump.&nbsp;At the top you push in the shower head and bolt on the lid. I drilled out the holes of the top module to 4.5mm to fit in 3 heat-inserts to make this secure but it does function fine without the lid bolted down.&nbsp;Have fun growing!

Modular Hydroponics Tower

鱼小兑

这是？我的世界！THIS IS MINECRAFT !可收纳小型零件，可组装的经验模块（自由决定数量）可选项：钻石镐、经验点、等级数字（现在只有一个数字）默认提供拓竹256mm可打印的版本，当然你可以选择剪切模型后放大打印（若放大请记住你的放大比例然后应用到所有打印模型上！）------------------------------主体分为两盘打印第一盘生命饱食度条需要黑色、棕色、白色、红色第二盘格子容器建议灰色打印完成插入组装（太紧打磨连接杆，太松加入胶水固定）------------------------------可选项配件（钻石镐：深青色、浅蓝色、深棕色、深黄色）（经验点：深绿色、浅绿色）（等级数字：黑色、浅绿色）但是我建议买点丙烯马克笔或者水性丙烯直接上色，毕竟凑齐这些颜色的耗材比较麻烦，所以我提供了第二个手动上色的版本薄涂多次即可（PS：我也是这么做的）钻石镐和等级数字是通过胶水固定已开源,f3d格式，使用fusion360建模，欢迎二创<figure class="image image_resized" style="width: 60.26%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000492643/design/2024-06-12_61105e7277a91.png"></figure>Storable Small Parts and Assemblable Experience Modules (Number of modules can be freely decided)Options: Diamond Pickaxe, Experience Points, Level Number (currently only one number available)A printable version of the Taketake 256mm model is provided by default. Of course, you can choose to cut the model and enlarge it for printing (if you enlarge it, remember your scale ratio and apply it to all printed models!).------------------------------The main body is printed in two plates:First plate: Health and Hunger Bar needs black, brown, white, and red. Second plate: Grid Container is recommended to be gray.After printing, insert and assemble (if too tight, sand the connecting rods; if too loose, add glue to secure).------------------------------Optional Accessories (Diamond Pickaxe: dark cyan, light blue, dark brown, dark yellow) (Experience Points: dark green, light green) (Level Number: black, light green)However, I suggest buying some markers or water-based acrylic paint to color them directly, as it&#39;s quite troublesome to gather all these colors of filament. Therefore, I provided a second version for manual coloring.Apply thin coats multiple times.The Diamond Pickaxe and Level Numbers are fixed with glue.Open source, in f3d format, modeled with Fusion 360, creative modifications are welcome.

Minecraft物品栏|Inventory

for kids

Custom Kas

This Gridfinity range focusses on aesthetics, next to functionality, to be used as more than just a drawer organiser. &nbsp;These are all made to be printed reasonably fine, the examples given are in 0,16mm Optimal printed on a X1 Carbon, but faster printing setting work just as well. Print times in 0,16 can be on the long side, especcially with complex models there is little you can do about that, these look just as good and print a lot faster of you increase layer height. All models in this range are made to be printed without supports and are fully compatible with the Gridfinity standard with magnet holes.&nbsp;You can use the Bambu slicer to play around with colour, The Basic Black PLA and Silk Yellow PLA combination as pictured is my go-to combination, but there are many more that look just as cool.&nbsp;&nbsp;More models from this range can be found here and on my profile:<ul><li><a target="_blank" href="https://makerworld.com/en/models/462656#profileId-371180" rel="nofollow noopener">Gridfinity Paint Station Aesthetic Black&amp;Gold by Custom Kas - MakerWorld</a></li><li><a target="_blank" href="https://makerworld.com/en/models/462646#profileId-371171" rel="nofollow noopener">Gridfinity Tamiya Station Aesthetic Black&amp;Gold by Custom Kas - MakerWorld</a></li><li><a target="_blank" href="https://makerworld.com/en/models/462638#profileId-371163" rel="nofollow noopener">Gridfinity Microscale Holder Aesthetic Black&amp;Gold by Custom Kas - MakerWorld</a></li><li><a target="_blank" href="https://makerworld.com/en/models/467918#profileId-377038" rel="nofollow noopener">Gridfinity Hobby Clip Holder Aesthetic Black&amp;Gold by Custom Kas - MakerWorld</a></li><li><a target="_blank" href="https://makerworld.com/en/models/462667#profileId-371195" rel="nofollow noopener">Gridfinity Pigment Holder Aesthetic Black&amp;Gold by Custom Kas - MakerWorld</a></li><li><a target="_blank" href="https://makerworld.com/en/models/517036#profileId-433267" rel="nofollow noopener">Gridfinity Tamiya holder Aesthetic Black&amp;Gold by Custom Kas - MakerWorld</a></li><li><a target="_blank" href="https://makerworld.com/en/models/517045#profileId-433282" rel="nofollow noopener">Gridfinity Alclad holder Aesthetic Black&amp;Gold by Custom Kas - MakerWorld</a></li><li><a target="_blank" href="https://makerworld.com/en/models/467905#profileId-377025" rel="nofollow noopener">Gridfinity Organizer Aesthetic Black&amp;Gold by Custom Kas - MakerWorld</a></li><li><a target="_blank" href="https://makerworld.com/en/models/462629#profileId-371156" rel="nofollow noopener">Gridfinity 2x3 Bin Aesthetic Black &amp; Gold by Custom Kas - MakerWorld</a></li><li><a target="_blank" href="https://makerworld.com/en/models/462627#profileId-371150" rel="nofollow noopener">Gridfinity 2x2 Bin Aesthetic Black &amp; Gold by Custom Kas - MakerWorld</a></li><li><a target="_blank" href="https://makerworld.com/en/models/517024#profileId-433250" rel="nofollow noopener">Gridfinity 2x1 Bin Aesthetic Black&amp;Gold by Custom Kas - MakerWorld</a></li><li><a target="_blank" href="https://makerworld.com/en/models/467886#profileId-377004" rel="nofollow noopener">Gridfinity 1x1 Bin Aesthetic Black&amp;Gold by Custom Kas - MakerWorld</a></li></ul>&nbsp;Battle Station Baseplates:<ul><li><a target="_blank" href="https://makerworld.com/en/models/517059#profileId-433300" rel="nofollow noopener">Gridfinity Battlestation Base - Large by Custom Kas - MakerWorld</a></li><li><a target="_blank" href="https://makerworld.com/en/models/517071#profileId-433318" rel="nofollow noopener">Gridfinity Battlestation Base - Small by Custom Kas - MakerWorld</a></li></ul>&nbsp;&nbsp;I will update this range with more models as I finish them, if you have any tips or requests I love to hear them. &nbsp;&nbsp;

Gridfinity 2x2 Bin Aesthetic Black&Gold

desk organizers

GlennovitS 3D

UPDATE 13. Dec 2023 - Added 12 more sizes! (same lengths, but with a bigger or smaller lid/opening - size 30 and 50. Size 40 is the original) Enjoy!&nbsp;With this simple little print, you can make your bags a lot easier to use in the kitchen! It’s easy to open, pour and close again. Just print and mount on the bag and you are ready to go! No extra hardware needed - all 3D printed. Ready within an hour - almost no reason not to try this ;-)<h2>Overview</h2>The model comes in 18 sizes for now! It's based on the diameter of the lid/opening and the length of the clip. The diameter comes in 3 sizes:<ul><li>30 mm</li><li>40 mm</li><li>50 mm</li></ul>All lengths of the clips in a particular diameter size, uses the same Cylinder and Lid.The clip comes in 6 lengths (currently from XS to XXL). The total length of the different sizes is approx.:<ul><li>XS: 55, 65, 75 mm (depending on the diameter of the lid/openening)</li><li>S: 90 mm</li><li>M: 120 mm</li><li>L: 150 mm</li><li>XL: 180 mm</li><li>XXL: 210 mm</li></ul>For your information, the sizes used on the images are:<ul><li>Pink: 40 - XS</li><li>Yellow: 40 - XL</li><li>Blue: 30 - XS</li></ul>If you have a request for more sizes or other ideas that would make this clip even better, please leave a comment and I’ll get back to you!<figure class="image image_resized image-style-side" style="width:40.53%;"><img src="https://makerworld.bblmw.com/makerworld/draft/450294/2023-12-11_bc82b2a49eaeb.gif"></figure><h2>Assembly</h2><ol><li>Cut a hole in the bag (fx. a hole in the corner just big enough to fit the cylinder)</li><li>Hold the Cylinder in the hole with the thread sticking out.</li><li>Mount the Clip around the bag and Cylinder base</li><li>Screw the Lid on</li></ol><h2>Print instructions</h2>It prints easy and can print with default values. There are some tips though to make it better.<ul><li>Supports: No - the print-in-place hinge prints without supports!</li><li>Walls/perimeters: 3-5 - the more walls, the stronger but more filament is used - so test a see what you find the best.</li><li>Infill: The more infil, the stronger it will be. Mostly needed on the longer Clip versions.</li></ul>&nbsp;Happy printing!&nbsp;<h2>Want to show your support?</h2>You can see all my designs on Printables - and you can become an active supporter. I would really appreciate it!<a target="_blank" href="https://www.printables.com/@GlennovitS3D#join" rel="nofollow noopener">https://www.printables.com/@GlennovitS3D#join</a>

Ultimate Bag Clip (with Lid - easy access!)

cool

RJ Design

The Design&nbsp;Here we here a Vortex made from Suspended filament. This looks great and shows off the capabilities of your Printer.&nbsp;After a couple of people have had bed adhesion issues, I&#39;ve added an updated Version with a thicker rim, which can be found here: &nbsp;<a target="_blank" href="https://makerworld.com/en/models/475325#profileId-386079" rel="nofollow noopener">https://makerworld.com/en/models/475325#profileId-386079</a>&nbsp;This version should work great! but if you experience any issue the Thicker Rim version should help&nbsp;The cylinder is approximately 100mm in diameter&nbsp;&nbsp;Printing&nbsp;Slice with the Arachne wall generator. ensure layer thickness is at 0.2mm &nbsp;Once printed let the build plate cool. The base is fragile - take extra care when remove from the build bed.&nbsp;Occasionally a filmament line may fail. I recommend careful plucking it out - it won&#39;t affect the overall look. &nbsp;&nbsp;&nbsp;My WorkAfter many years in Engineering, I&#39;ve just decided to try and follow my childhood dream of becoming of a Creative Designer.A Creative Designer of what? No idea! Right now I really like puzzles, mechanisms and kinetic sculptures so that&#39;s where I&#39;m going to focus my efforts.

hp

for kids

desk organizers

cool

art