inatwinklingcrafts

SugarPaws3D

An adorable and magical treat that will transport you straight into the wizarding world 🐸Inside this enchanting box, you can fit one (or many tiny) chocolate flexi frogs!&nbsp;<a target="_blank" href="https://patreon.com/SugarPaws3D?utm_medium=unknown&amp;utm_source=join_link&amp;utm_campaign=creatorshare_creator&amp;utm_content=copyLink" rel="nofollow noopener">Commercial License available on Patreon: SugarPaws3D</a>&nbsp;Notes:I don&#39;t know if I have to say this but - please do not eat your chocolate frog buddies...😳&nbsp;When scaling the box + lid , be sure to select both objects and scale together to ensure they will fit together&nbsp;Supports needed for the lid only - I used Snug Grid supports and they came off easily with little scaring to the bottom surface&nbsp;Frogs tested down to 50% while the box can be scaled down to 60% before losing too much detail on the design (Lid is separated by object so you can remove the text if you&#39;d like)&nbsp;Filament Used:Bambu Labs: Matte Dark BrownBambu Labs: Matte CharcoalElegoo: Matte Lavender PurpleGold box details I used <a target="_blank" href="https://www.michaels.com/product/premium-gilding-paint-by-craft-smart-10014834?cm_mmc=PLASearch-_-google-_-MICH_Shopping_US_N_Craft+%26+Hobbies_N_PMAX_LocalOnly_N-_-&amp;Kenshoo_ida=&amp;kpid=go_cmp-18514199957_adg-_ad-__dev-c_ext-_prd-10014834&amp;gad_source=1&amp;gclid=Cj0KCQjwj9-zBhDyARIsAERjds1COpnxLg7zy5oWjehbx09BGWBZhZk5wj77DO0M1vGAYvxssgR6egUaAgU3EALw_wcB" rel="nofollow noopener">Premium Gilding Paint by Craft Smart</a> for an extra pop

Harry Potter Chocolate Frog - Flexi +Storage

harry potter

Techro3D

Classic bird feeder | octagonal house | with mounting bracket| By Techro3D&nbsp;<ul><li>Water drainage.</li><li>Mounting bracket.</li><li>Suspension point for a fatball or other bird food.</li><li>Bottom also suitable for placing food.</li><li>Removable roof.</li><li>100% printable.</li><li>No glue required, but can be used just to be sure.</li></ul><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453035/design/2024-05-04_a142276d19e56.png"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453035/design/2024-05-04_bf6862079a949.png"></figure>

Classic bird feeder, octagonal house.

household

bowls

Checkers Wolf

<h4> </h4><h4>I AM NOT THE CREATOR OF THIS I AM ONLY REPOSTING IT HERE WITH A PRINT PROFILE FOR THE X1 CARBON</h4>All credit goes to “<a target="_blank" href="https://www.thingiverse.com/Megawillbot" rel="nofollow noopener">William Bruning</a>” <a target="_blank" href="https://www.thingiverse.com/megawillbot/designs" rel="nofollow noopener">Designs - Thingiverse</a><h4>Summary</h4>Seeing as it's almost Halloween, I thought it'd be as good time to do my take on a pumpkin... or a spider... aw heck, why not both?--For this print, I used ReelToReal's white ABS filament- It's a great quality material, at a very competitive price, which is why I've stuck with them ever since I first started printing!If you like how my prints look, you should check them out at <a target="_blank" href="http://bit.ly/reeltoreal_nz" rel="nofollow noopener">http://bit.ly/reeltoreal_nz</a>--Finished prints available on Etsy: <a target="_blank" href="https://www.etsy.com/nz/listing/648503075/halloween-pumpkin-spider-transformer" rel="nofollow noopener">https://www.etsy.com/nz/listing/648503075/halloween-pumpkin-spider-transformer</a>--For the outer pumpkin sculpt I used tone001's pumpkin, be sure to check him out: <a target="_blank" href="https://www.thingiverse.com/thing:1836056" rel="nofollow noopener">https://www.thingiverse.com/thing:1836056</a>--If you made it, don't forget to post the make! Seeing how prints turned out, and receiving feedback, is a great help for me.Big thanks to everyone who's tipped me! <a target="_blank" href="https://www.thingiverse.com/usernameladiesman217" rel="nofollow noopener">https://www.thingiverse.com/usernameladiesman217</a> <a target="_blank" href="https://www.thingiverse.com/Leadboss" rel="nofollow noopener">https://www.thingiverse.com/Leadboss</a> <a target="_blank" href="https://www.thingiverse.com/LT72884" rel="nofollow noopener">https://www.thingiverse.com/LT72884</a> <a target="_blank" href="https://www.thingiverse.com/RC_Tinker" rel="nofollow noopener">https://www.thingiverse.com/RC_Tinker</a> <a target="_blank" href="https://www.thingiverse.com/joshcarter" rel="nofollow noopener">https://www.thingiverse.com/joshcarter</a> <a target="_blank" href="https://www.thingiverse.com/laurel69" rel="nofollow noopener">https://www.thingiverse.com/laurel69</a> <a target="_blank" href="https://www.thingiverse.com/FusionVibe" rel="nofollow noopener">https://www.thingiverse.com/FusionVibe</a> <a target="_blank" href="https://www.thingiverse.com/Draekane" rel="nofollow noopener">https://www.thingiverse.com/Draekane</a> <a target="_blank" href="https://www.thingiverse.com/Michael2155" rel="nofollow noopener">https://www.thingiverse.com/Michael2155</a> <a target="_blank" href="https://www.thingiverse.com/R87Mavric" rel="nofollow noopener">https://www.thingiverse.com/R87Mavric</a> <a target="_blank" href="https://www.thingiverse.com/bullfr0g" rel="nofollow noopener">https://www.thingiverse.com/bullfr0g</a> <a target="_blank" href="https://www.thingiverse.com/darBis" rel="nofollow noopener">https://www.thingiverse.com/darBis</a> <a target="_blank" href="https://www.thingiverse.com/ReeseLloyd" rel="nofollow noopener">https://www.thingiverse.com/ReeseLloyd</a> <a target="_blank" href="https://www.thingiverse.com/_CJ_" rel="nofollow noopener">https://www.thingiverse.com/_CJ_</a> <a target="_blank" href="https://www.thingiverse.com/chrishaston" rel="nofollow noopener">https://www.thingiverse.com/chrishaston</a>Featured in: <a target="_blank" href="https://blog.prusaprinters.org/halloween-3d-print-showcase_8998/" rel="nofollow noopener">https://blog.prusaprinters.org/halloween-3d-print-showcase_8998/</a> <a target="_blank" href="http://www.homecrux.com/3d-printed-halloween-pumpkin-spider-transformer/110041/" rel="nofollow noopener">http://www.homecrux.com/3d-printed-halloween-pumpkin-spider-transformer/110041/</a> <a target="_blank" href="https://all3dp.com/3d-printed-halloween-pumpkin-spider-transformer/" rel="nofollow noopener">https://all3dp.com/3d-printed-halloween-pumpkin-spider-transformer/</a> <a target="_blank" href="https://howchoo.com/g/ngu3odnmmzc/top-halloween-things-to-3d-print" rel="nofollow noopener">https://howchoo.com/g/ngu3odnmmzc/top-halloween-things-to-3d-print</a> <a target="_blank" href="https://hackaday.com/2018/10/17/3d-printing-halloween-style/" rel="nofollow noopener">https://hackaday.com/2018/10/17/3d-printing-halloween-style/</a> <a target="_blank" href="https://smartie.store/10-ideas-what-to-3d-print-on-halloween/" rel="nofollow noopener">https://smartie.store/10-ideas-what-to-3d-print-on-halloween/</a> <a target="_blank" href="https://makezine.com/2019/10/31/8-last-minute-3d-prints-to-spookify-your-halloween/pumpkinbot/" rel="nofollow noopener">https://makezine.com/2019/10/31/8-last-minute-3d-prints-to-spookify-your-halloween/pumpkinbot/</a> <a target="_blank" href="https://blog.adafruit.com/2018/10/11/halloween-pumpkin-spider-transformer-3dthursday-3dprinting/" rel="nofollow noopener">https://blog.adafruit.com/2018/10/11/halloween-pumpkin-spider-transformer-3dthursday-3dprinting/</a>Note: "Download All" doesn't work sometimes, so if it gives you a 404 error, go to the "thing files" section and download them from there.<h4> </h4><ul><li>Notes:</li></ul>Model units are in mm, don't accidentally print something 10x too big!I've included chest-2parts.stl in case the chest piece breaks on your printer, just put the legs in the sockets and glue down the top.If you choose to go the path of printing orangeparts.stl and blackparts.stl, you'll have to glue them together post-print.The print in the photo is at 80% size.<h4>Post-Printing</h4>Assembly:&nbsp;Once the print's finished, put some superglue on the base of the ball joint in the middle of the chest, to reinforce it. assemble by pushing the leg ball joints into the chest sockets. Depending on the printer, the tightness of assembly may vary, but due to the cyclic shape of the chest there shouldn't be any serious breakage. Once those are in, click the other end into the pumpkin slices, and you've got the legs! They should all be the same around the pumpkin, to get it to have the abdomen fold 2 legs around backwards. The head is connected to the body with 2 the neck joints, move the head to the front for spider mode. For pumpkin mode, move it upwards, then move it down so it fits snugly in the middle.For the print in the image, I made it in white ABS plastic, then smoothed it with acetone, and airbrushed the individual pieces.&nbsp;<img src="https://cdn.thingiverse.com/assets/27/3e/50/ce/ec/Screenshot_300.png" alt="">&nbsp;<h4> </h4>&nbsp;

Transforming Pumpkin Spider

halloween

jamisonusmc

I used a smooth spakle plate, but you can use whatever you prefer. Just purchase some simple dangle earring parts and you&#39;re good to go.

Beauty and the Beast Rose  Rose Dangle Earrings

earing

MinerJ

Collection of 8 Star Wars themed croc charms, designed to be printed in TPU with a manual color change (at layer 73 if printing 0.2mm layers). I recommend using regular supports, they come off of TPU much cleaner and easier which is well worth the extra time/material.&nbsp;The flexibility and durability of TPU makes them the ideal material for these, but unfortunately TPU doesn&#39;t work reliably in the AMS, so multicolor printing requires manual color changes.&nbsp;These were all printed in a combination of Overture and Hatchbox 95A TPU, default generic TPU filament settings seem to work well, but the slicer settings require some tweaking. Make sure you dry your TPU very well before printing to prevent a stringy mess. Even with dry filament there will be some minor stringing with all of the retractions, but a little time with a razor and tweezers cleans them up nicely.&nbsp;Can also be printed in PETG, avoid PLA as it&#39;s too brittle and the posts are likely to snap.Edit 01 July 2024: Added AMS compatible print profile for PETG, with each model on it&#39;s own plate for easy printing from the Handy app

Star Wars Croc Charms - TPU 2 Color

charm

3D Prints This Week

Load gray and white into the ams.&nbsp;If you like the way it comes out, feel free to drop a tip in the link below or a 5 star review always helps too.&nbsp;https://www.buymeacoffee.com/3dprintsth3

Leveling up / Getting Old / Birthday / Sign / Art

signs

Load gray and white into the ams (or any two color combo).&nbsp;If you like the way it comes out, give me a boost, feel free to drop a tip in the link below, or a 5 star review always helps too.&nbsp;https://www.buymeacoffee.com/3dprintsth3

Mothers Day Sign / Mom / Gift Idea / Easy /

Funny Old People Sign / Warning / Humor / Wall Art

father

uberroot

<figure class="media"><div data-oembed-url="https://youtu.be/Gl6Cd24VUjk"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Gl6Cd24VUjk" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;For a smaller but decorative version check out <a target="_blank" href="https://makerworld.com/en/models/166276" rel="nofollow noopener">https://makerworld.com/en/models/166276</a>&nbsp;Have you ever seen an executive's office without one? Then why should you go without!? The classic desk toy and demonstration of conservation of momentum and physics is available to print without any extra hardware! In the office these make the perfect tool to brainstorm, refocus, unwind and meditate, or simply start a conversation. For the classroom these are an essential demonstration in classical mechanics that no physics teacher should be without. For everyone else, I mean just look at this you know you want to play with it…&nbsp;Feel free to remix if you have ideas for making one that works better! <a target="_blank" href="https://www.tinkercad.com/things/aKtssHNMYdr-big-ol-newtons-cradle" rel="nofollow noopener">https://www.tinkercad.com/things/aKtssHNMYdr-big-ol-newtons-cradle</a>&nbsp;Changes from the original:<ul><li>Massive 250mm frame - Make use of that entire build plate</li><li>Massive 40g (that's 10x!) / 40mm balls - More mass = More swing time</li><li>Tighter connectors on the balls - Less lateral movement = More swing time</li><li>Sturdier strings - Less lateral movement = More swing time</li><li>Properly angled connectors on the strings - Less tension = Less friction on the axle</li></ul>PrintingThere are 3 plates: the balls, the frame, and the strings.Balls - these are 100% infill. Make sure you tune your filament.Frame - print this plate twice.Strings - these are straightforward.&nbsp;AssemblyRemove the brims<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/553452/2024-02-16_7a4ec2e0499b.jpg"></figure>&nbsp;Snap the base together - it helps to lay one side on a table and press into it 1 snap at a time once everything is aligned.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/553452/2024-02-16_5e2b9b0c33c1b.jpg"></figure>&nbsp;Attach the strings to the balls<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/553452/2024-02-16_3c58f14e448d5.jpg"></figure>&nbsp;Attach the strings to the base<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/553452/2024-02-16_6cb8abcba987d.jpg"></figure>&nbsp;Swing!

Newton's Cradle XL (Functional!)

teacher

MakerVerse Designs

A Darth Vader piggy bank (money box) which is fully 3D-printed and can be opened and closed thanks to a locking screw mechanism&nbsp;Have fun with it and leave a like or subscribe if you like it!If there are any suggestions for improvement, feel free to write a comment.

Darth Vader Piggy Bank

bank

HannaBannah

<figure class="image image_resized" style="width:22.96%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000450671/design/2024-05-02_59a4bafce9f6b.gif"></figure>&nbsp;Step up your tabletop gaming experience with the D20 Slot Machine Dice Tower! This unique 3D model combines the thrill of a classic slot machine with the functionality of a dice tower. With its eye-catching design and practicality, it&#39;s the perfect addition to any gaming session. Did I also mention it has a storage compartment for your dice? Neat-o!Print Settings:<ul><li>Body<ul><li>0.2 layer height</li><li>3 walls</li><li>10% Infill</li><li>Bridging enabled</li><li>No brim</li><li>No supports</li></ul></li><li>Spring, Key, Arm, Blocker, D20, Lid<ul><li>0.2 layer height</li><li>3 walls</li><li>25% Infill</li><li>No supports</li></ul></li><li>Key, D20<ul><li>0.2 layer height</li><li>3 walls</li><li>25% Infill</li><li>No supports</li><li>Scale if tolerances are too loose or too tight</li></ul></li></ul>Assembly Instructions:<ol><li>Print one of each part</li><li>Insert Key into Blocker (It should hold with friction, use Super Glue if needed)<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000450671/design/2024-05-02_84a291ce7471b.jpeg"></li></ul></li><li>Insert Blocker into the side of the Body with the Key facing outward.<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000450671/design/2024-05-02_c855107403958.jpeg"></li></ul></li><li>Insert Blocker all the way and turn clockwise so the key is now vertical.<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000450671/design/2024-05-02_cc0d4fd318bbf.jpeg"></li></ul></li><li>Slide the Spring onto the Key and fit the Spring into the slot. (Spring should have slight tension)<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000450671/design/2024-05-02_cad6a30b1e3c7.jpeg"></li></ul></li><li>Press the D20 onto the end of the Lever. (It should hold with friction, use Super Glue if needed)<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000450671/design/2024-05-02_870da182d9d1d.jpeg"></li></ul></li><li>Press the Lever onto the end of the Key so the Lever is Pointed up. (It should hold with friction, use Super Glue if needed)</li></ol>

D20 Slot Machine Dice Tower

dice

joeythatoneguy

Couldn't make other Pokemon coins without making the iconic Charizard!

Charizard Pokemon Coin

pokemon

Load black and white into the ams.&nbsp;If you like the way it comes out, give me a boost, feel free to drop a tip in the link below, or a 5 star review always helps too.&nbsp;https://www.buymeacoffee.com/3dprintsth3

Mickey Minnie Mouse Coaster / Disney / Coffee

coffee

Kevvv-3D

Show off your love for coffee with this easy to print Cute Coffee keychain. I used an Acrylic Paint Marker for the white spots on eyes.&nbsp;This is MY ORIGINAL DESIGN and therefore, you do not have the right to sell the model files. You are always free to make your own cute coffee keychain design though! ;)&nbsp;Features<ul><li>Easy to print</li><li>Original design!</li><li>Color change at layers/pause</li><li>Pre-colored print profile (easily customizable)</li><li>No supports required</li></ul>Suggestions and feedback are always welcome! I am new to the 3D Design world and always learning new best practices in design and always open to criticism to improve my designs. Wanna buy me a coffee to help fuel my teaching days and help me pop out new designs? <a target="_blank" href="https://paypal.me/kevinwatts029?country.x=US&locale.x=en_US" rel="nofollow noopener">https://paypal.me/kevinwatts029?country.x=US&locale.x=en_US</a>

Cute Coffee Keychain

keyring

3Dimension Customs

Simple Large keychain display stand for vendors selling keychains printed on a CR-10s will not fit on BBL due to being 320mm tall.

Keychain Display Stand

display

galehrlich

A multicolor Chess board travel edition.All pieces included (pawn, rook, bishop, knight, king and queen) and all have a dedicated slots for comfortable storage.Designed with 4 colors, but can be downgraded to 2 only

Multicolor Chess travel edition

games

Printsmiths

Slide the two rings onto the grip (yes, light glue will help them stay in place), and start destroying evil.

The ClaraWand

wands

reddadsteve

Charlie Brown, from the comic strip Peanuts by Charles Schulz.Personality-wise, he is gentle, insecure, and lovable. Charlie Brown possesses significant determination and hope, but frequently fails because of his insecurities, outside interference, or plain bad luck.No supports are required. If you have the proper filament colors, no painting is needed.The model is 140mm tall.Enjoy!<h3>Print instructions</h3>Rafts: Doesn't Matter Supports: No Resolution: .2mm Infill: 10%Notes: See below for helpful printing and assembly tips.<hr/>Building the model Colors (there are no multiple printed pieces)Black: c_hair c_eyebrows c_eyes c_mouth c_stripes c_pants .. Beige or Flesh: c_head_top c_head_bottom c_arm_left c_arm_right c_legs .. Brown: c_shoes .. Yellow: c_shirt_top c_shirt_bottom c_socks .. Any color (hidden pieces) c_pins ..<hr/>Printing and assembly tipsPrinting tips 1-As with most of my models, no supports are required.2-Be sure to clean any first layer squish if you have any problem joining parts. The parts should fit nicely when printed cleanly or with a slight first layer squish.3-I did not require any rafts or brims for any of the parts... Assembly tips: 1-The eyebrows have the thinner part pointing toward the nose. The parts are small and print well but if for some reason you have an issue inserting them into the head (over-extrusion or a squish that cannot be cleaned) simply flip them over and put them in with the flat side facing out.2-The left/right eyes are interchangeable. There is an up/down positioning of each eye. If it does not look right when inserted just rotate the eye piece for a better fit.4-Since I model with the goal of no supports, the angle of the left arm did not allow for a dent into the shirt. This is not really an issue here, just glue the left arm to the shirt sleeve and an extra dab of glue on his hand were it touches the stripe.5-Refer to the assembly diagram for putting the model together. The model is meant to be glued.

Charlie Brown

Wastl85

Print a Easter Bunny with Basket, good for Easter eggs. Scaled to 150%!

Easter Bunny with Basket

Easter

Grumpy Ol Vet Printing

Another inland cardboard spool adapter.

Inland Cardboard Spool Adapter 2

spool

Troysterr

<h2>Summary</h2><a target="_blank" href="https://a360.co/3NFUsIE" rel="nofollow noopener">Full 3D View</a>This model is inspired by the 1932 Ford Model B pickup truck.The wheelbase of this model is about 1/8" shorter than the standard and may not be eligible for some races.As with all of my builds, I'm not good enough at Fusion 360 to create a faithful replica, but I tried to capture most of the key elements.<h3>What is a "pinewood derby car shell"?</h3>A <a target="_blank" href="https://en.wikipedia.org/wiki/Pinewood_derby" rel="nofollow noopener">pinewood derby</a> is an event created by the Boy Scouts many years ago. Each scout is given a pinewood derby kit typically consisting of a block of wood with slots for axles, 4 wheels, and 4 nails to be used as axles. The scout (and his dad, usually) will then carve the block of wood into the shape of a car, paint it and apply stickers, install the wheels on the axles, and then race it at the "derby", which involves a sloped track with a timekeeping apparatus.An official scout derby will usually require that the parts in the kit be used for cars entered in the derby. Other organizations (including workplaces) often hold derbies, too, and some of them require the use of the parts in the box, including the block of wood.These "pinewood derby car shells" are intended to be used with an official derby wood block, cut down to size, along with the axles and wheels included in the kit. A printable model of the shaped wood block is provided. You can either use the printed model or use it to accurately cut an official wood block down to size.<h3>Notes: </h3><ul><li>Body and bed: Supports are required. You can choose to print "Body.stl" and "Bed.stl" and add your own rafts, or you can print "Body with Minirafts" and "Bed with Minirafts" for a minimal raft-like surface that will aid in keeping the supports adhered to the build surface.</li><li>Windshield and windows: I printed these using clear PETG. I printed the windshield using standard settings, flat on the print bed. The other windows I printed upright in vase mode, using the STL files with "minirafts" and supports. They could also just be printed flat and would probably look about the same. Black would also probably look good.</li><li>Wheels: The wheels provided are for show only. They have "minirafts" included. Supports should be added between the miniraft and the wheel.</li><li>Tires: For the show tires, I printed most of the tires using black, then paused the printer once it got to the last few layers and swapped the filament out for white.</li><li>If you print the "Shaped Block.stl", print it upside-down. That will ensure that the axle slots print correctly.</li><li>Everything else is pretty simple and straightforward to print, with minimal or no supports/rafts/brims.</li></ul><h2>Post-Printing</h2><h3>Smoothing</h3>This car was smoothed with 3d printing resin and baby powder. You can find videos and guides online that describe the process, but here it is in a nutshell:<ul><li>Mix 1 part resin and 2-3 parts baby powder in an opaque container (so that it can be stored without hardening due to UV exposure).</li><li>Using a paintbrush or cotton swab, spread a thin layer of the resin/baby powder mix over the body, wherever you want to smooth print lines and gaps.</li><li>Use a UV flashlight (a cheap one--like the kind used to harden resin finger nail polish, which you can order from Amazon or buy in the pharmacy department of Walmart) to harden the resin.</li><li>Sand the body smooth until there are no thick layers left.</li><li>Repeat over any areas that are still rough.</li></ul>This model is designed to drop on an official wood block carved in the shape of "Shaped Block.stl". The wheel slots are slightly closer together than on the standard block, though, so you'll need to cut a new wheel axle slot. Or just use the 3D printed block if your derby allows it.

1932 Ford Model B Truck (Pinewood Derby Car Shell)

toys

Ibaviosa Baubles

Dangling conversation hearts. The perfect sweet gift for Valentine's!&nbsp;&nbsp;

Sweethearts Candy Earrings

valitines

Tommy Gun

Here&#39;s a nice set of 5 coasters and amazing question mark block coaster holder/box !!&nbsp;Easy print, only have the ? and dots inserts to glue on as i wanted to save on filament !!!&nbsp;Coasters Dimensions: 104 mm diameter 4 mm height&nbsp;-Print x4 question mark inserts and x16 Dots inserts&nbsp;Interested in selling my prints : <a target="_blank" href="https://patreon.com/Papa3dHomemadePrints" rel="nofollow noopener">https://patreon.com/Papa3dHomemadePrints</a> &nbsp;Brother Box <a target="_blank" href="https://makerworld.com/en/models/112575#profileId-120555" rel="nofollow noopener">https://makerworld.com/en/models/112575#profileId-120555</a> &amp; Super mario Pipe holder : <a target="_blank" href="https://makerworld.com/en/models/101819#profileId-108453" rel="nofollow noopener">https://makerworld.com/en/models/101819#profileId-108453</a>&nbsp;Pen box&amp;pipe holder : <a target="_blank" href="https://makerworld.com/en/models/141100#profileId-153752" rel="nofollow noopener">https://makerworld.com/en/models/141100#profileId-153752</a> &nbsp;Question mark lightbox : <a target="_blank" href="https://makerworld.com/en/models/127720#profileId-138211" rel="nofollow noopener">https://makerworld.com/en/models/127720#profileId-138211</a>&nbsp;Grey Brick coaster box and coasters : <a target="_blank" href="https://makerworld.com/en/models/210143#profileId-230023" rel="nofollow noopener">https://makerworld.com/en/models/210143#profileId-230023</a>

Super Mario ? Coaster Box and Coaster set x5

video games

flexi.factory

This Flexi Panda is an articulated print-in-place model that needs NO supports. The stand is printed in 3 parts and easily snaps together with no need for glue Included are 7 files: -Panda -Bamboo stick (for panda to hold) -Stand Platform -Stand Base -Stand ladder -Painted Bambu AMS Panda -Painted Bambu AMS Stand Also Optimized for AMS, meaning if you are using a Bambu Printer with multiple colors, you should easily be able to use the fill tool for coloring. I have added a 3mf as well for convenience! Like with all my Flexi's, I went through many iterations to make sure it was strong, and easy to print without supports. ALL Flexi Factory designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent.To legally sell PRINTED models, you may obtain my permission through this link:<a target="_blank" href="https://www.patreon.com/FlexiFactory" rel="nofollow noopener">https://www.patreon.com/FlexiFactory</a> or www.myminifactory.com/users/FlexiFactoryPlease help support the creative work of each 3D artist and NEVER share or sell a digital file.<h2>3D PRINTING SETTINGS</h2>Easy Print. Can be scaled upNo Supports (adding supports will hinder functionality) Mostly Print-in-place (the stand snaps together) 15% infill I always like to use 3 walls PLA works great

Flexi Factory and Bambu Lab Collaborative: Panda Bear and Stand

animals

BMO_the_Console

This is a remix of the Arcade Cabinet from antirez scaled up almost 300%, split into multipart for better multicolor printing and I added a slit to slide in a Gift Card/Arcade Card to make it look like it is the Screen.The Size for the Gift Card is 85.6 mm x 53.98 mm x 0.76 mm (ISO Standard 7810 ID-1 Norm)<h4>Instructions:</h4><ol><li>Print all the Files</li><li>Glue the Sidepanel to the Arcade Cabinet, the Joystick-Ball on the JoyStick-Stick and the CoinSlot to the front of the Arcade Cabinet</li><li>Wait for the Glue to fully dried</li><li>Glue the Buttons and Joystick into the corresponding holes. TIP: Use less glue, so it does not ooze out of the holes when you put in the Buttons/Joysticks</li><li>Slide in the Giftcard</li><li>ENJOY!</li></ol><h4>MultiColor:</h4><ul><li>Arcade Cabinet: Red (0-3,63mm), Black (3,63mm - 103,72mm)</li><li>Sidepanel: Red</li><li>Joystick Ball: Red</li><li>Joystick-Stick: Silver</li><li>Button: Red</li><li>Coinslot: Black/Red</li></ul><h4>Recommended print settings:</h4><ul><li>2 Perimeters/Walls</li><li>3 Bottom/Top layers</li><li>15% infill (use 5% for the Cabinet and Sidepanel)</li><li>0.2mm layer height</li><li>No Support</li></ul>&nbsp;Special thanks to antirez!&nbsp;Please Post your Makes and leave a Like!

Arcade Cabinet Gift Card Holder

gifts

Elessar3141

Cool Badge for your Printer :) I colored the Model and prepared it for the AMS :) I hope you will like it :)

Star Trek Replicator Sign Badge

star trek

fay3dlab

I saw πxel8ed version of the suspended millenium falcon and i was inspired to make my own version.. i thought making the ship facing front with the strings looking like the streaking of lightspeed.. the falcon model by aaskedall from thingerverse was already a great design so i just used his model as a remix.. i did have to slightly change the model so it will print for a smaller version for my suspended millenium falcon..&nbsp;UPDATE:I have uploaded a new version model V3 that can be color picked for multicolor printing.. just learned how to do it.. unfortunately i cant edit the old print profile.. so you'll have to add them manually&nbsp;UPDATE 2:I made a LED version of the suspended millennium falcon that is backlite using led strips.. it is an addon part that will connected to the suspended ship.. so you just have to print the addon LED parts only.. not the whole ship.. i've upload the file at <a target="_blank" href="https://makerworld.com/models/113145" rel="nofollow noopener">https://makerworld.com/models/113145</a> <img src="https://makerworld.bblmw.com/makerworld/draft/491035/2023-12-30_4312a40409637.gif">

Suspended Millennium Falcon

star wars

LordBoos

Night Dragon (Lithophane) - HueForge&nbsp;To celebrate 200 downloads of my <a target="_blank" href="https://makerworld.com/en/models/16099#profileId-15125" rel="nofollow noopener">Night Dragon (Filament Painting) - HueForge</a> model, I recreated this model as a special edition in a form of Lithophane. It still looks good without backlight, but it really pops out when you backlight it!<h4>Printing instructions:</h4>Warning! This model requires very translucent filaments to be used as blue and purple colors and also a mildly translucent white. I used glitter PLA filaments from eSUN and AzureFilm, they are almost like a natural PLA only lightly tinted blue and purple with added glitter. Glitter is not that important, but it still adds a little something to the print. If you use very opaque filaments, it might not allow enough light to pass through and the lithophane might become very dark or not translucent at all. You can still attempt it, but you have been warned.&nbsp;Filament swaps ONLY, no MMU or AMS required, but AMS makes it much easier.Use Original HueForge profile to get the intended look, my models are very sensitive to print settings because of color blending between layers. Every setting and filament changes for AMS are carefully prepared and fine-tuned in the Original HueForge print profile, feel free to change colors, but I recommend not to adjust other settings. If you want to experiment with your own settings or non-original print profiles, for best look print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.You can use same filaments as I did, or you can experiment with your own.Don't forget to upload a make!<h4>Filaments Used:</h4><ul><li>PLA BambuLab Basic Jade White Transmission Distance: 4</li><li>PLA AzureFilm Glitter Blue Transmission Distance: 7</li><li>PLA eSUN eTwinkling Purple Transmission Distance: 6</li><li>PLA BambuLab Basic Black Transmission Distance: 0.6</li></ul><h4>Swap Instructions:</h4><ul><li>Start with Jade White</li><li>At layer #5 (0.48mm) swap to Glitter Blue</li><li>At layer #12 (1.04mm) swap to eTwinkling Purple</li><li>At layer #19 (1.6mm) swap to Black for the rest.</li></ul>