sneyders

Simply Models

Single or Multilayer Helix in HO / OO Gauge.&nbsp;This is 1st / 2nd Radius Track Setup.&nbsp;If your looking at this you likely don't need instructions. Once you start printing it, it'll become pretty self explanatory. Please use the pictures as a guide for assembly.&nbsp;&nbsp;I also have a 1st radius single track only Helix which can be found at the link below;<a target="_blank" href="https://makerworld.com/en/models/112324#profileId-120246" rel="nofollow noopener">Model Railway HO / OO 1st Radius Single Or Multilayer Helix by Simply Models - MakerWorld</a>

Model Railway HO / OO 1st/2nd Radius Single or Multilayer Helix

Model Layout

SnapPrint3D_SuperCrazyPrints

Sign up Membership to get 15+ models every month. All models 3D Print Without Supports and (3MF,STL) file ready! <a target="_blank" href="https://www.supercrazyprints.com/" rel="nofollow noopener">https://www.supercrazyprints.com/</a>&nbsp;Check out my other models: <a target="_blank" href="https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models</a>

Pokemon-Gengar (NO SUPPORT)

Josh-3D

<h3>Model</h3>A phone stand to go along with the<a target="_blank" href="https://makerworld.com/en/models/189326#profileId-208776" rel="nofollow noopener"> Headphone stand I made!</a> A few people had suggested this, so figured why not?&nbsp;Model is featured in Bambu PLA Matte Charcoal, and Bambu Iridium Gold Metallic for the main print. For the second print, it is featured in Bambu Charcoal and Polymaker Muted White.&nbsp;(Keep scrolling past the updates for required hardware and assembly instructions!) &nbsp;[Update 1]I added a step file for the main phone holder, to the raw files, to make it easier to adjust for other sized phones/devices that don't fit into the holder as it is now! If you modify the phone holder portion, please share! You can include the modified holder as a new print profile (No need to donate points, you did the tweak!), or if you'd prefer, you can just post it as it's own object. Just send me a link, and I'll add it in the description here to help make sure people find it.<figure class="image image_resized" style="width:30.22%;"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-26_265822ae21a7.png"></figure>[Update 2]I added a print profile that provides a variation on the holder part, adding in holes on the bottom to better allow for a speakers/mic to work without interference, as a user had requested one. <figure class="image image_resized" style="width:30.19%;"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-29_a1b94dad29915.png"></figure>[Community Spotlight]Thanks to <a target="_blank" href="https://makerworld.com/en/u/1489256341" rel="nofollow noopener">o.0jack</a> for the a1 mini profile<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-29_ada1894ffcacd.png"></figure><a target="_blank" href="https://makerworld.com/en/u/4171661601" rel="nofollow noopener">rakibby </a>has provided a version of the holder that's a little deeper (17mm!) so if you've got a thicker phone, check out rakibby's print profile! <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-29_1fd7a9c8d8b06.png"></figure><a target="_blank" href="https://makerworld.com/en/u/11128021" rel="nofollow noopener">KYZ Design</a> has made us a <a target="_blank" href="https://makerworld.com/en/models/217683#profileId-236629" rel="nofollow noopener">TPU Sock</a> to help keep the stand in place. They look great and match the style! <figure class="image image_resized" style="width:29.75%;"><a href="https://makerworld.com/en/models/217683#profileId-236629" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-03-01_7d2974c2e301d.png"></a></figure>&nbsp;[Tools & Assembly]Like the Headphone stand, the cell phone stand is pretty easy. You'll need the following hardware and tools.I designed this to use M3 socket cap screws.Hardware Needed:M3x12 - 4 (used for the feet)M3x25 - 3 (Used to connect the swing arm to the stand, and the phone holder to the swing arm)M3x30 - 1 (Used for the knob for the swing arm)M3xNuts x 9 (The knob makes use of two nuts!)Tools Needed:Hex DriverDrill bit for clearing holes&nbsp;Start by drilling out the holes in the feet and knob. These holes were partially blocked to get a cleaner print. All the other holes should be sized that a M3 screw can fit through without being too tight, but things like variation in filament properties might make the holes tight, so if you can't freely push a screw through the holes in the frame, clear them out with an appropriately sized drill too.<figure class="image image_resized" style="width:49.94%;"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-24_dee28ae5b0db5.png"></figure>Next, Prepare the knob! We'll feed a M3x30 screw through the hole and through a nut that'll be embedded on the other side of the knob. Tighten it down!<figure class="image image_resized" style="width:61.51%;"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-24_27826e74eb785.png"></figure>Now we'll assemble the main frame! There's embedded slots for all of the M3 nuts, so go ahead and prepare by putting all the nuts in place. Next, we'll install the feet, as once the holder and swing arm are on, it can obstruct access to the screws for the front feet. Use M3x12 screws for the feet! For the swing arm, attach the two phone holder sides using M3x25 screws. Attach the arm to the base using a M3x25mm screw, but make sure not to over tighten it as we don't want the hing to be too stiff! Lastly, install the knob through the guide and swing arm and tighten it down!<figure class="image image_resized" style="width:73.89%;"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-24_9f8ad10fc9a09.png"></figure>-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you're looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information. on.

Phone Stand - Industrial 

Organizers

needitmakeit

UPDATE 1 - There is a magnetic version available for the Original Rod Sloth (Rod Sloth Mag)UPDATE 2 - There is a 2 start version available for the Q1 or printer with 2 start threads (Rod Sloth- 2 Start)&nbsp;This is a tool that does an excellent job at cleaning your rod. It clamps snugly on the 8mm 3D printer or CNC leadscrew, you can remove your hands and let the printer do the rest of the work.This is meant to be used on any printer with a 8mm OD 2mm spacing, 4 start screw.<figure class="media"><div data-oembed-url="https://youtu.be/97mMNzwXf0o"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/97mMNzwXf0o" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>This print can be made on any printer from PLA, ABS or PETGPRINT SETTINGS<ul><li>Layer Height - 0.16</li><li>Walls - 4</li><li>Infill - Gyroid 35%</li><li>Btms - 4</li><li>Tops - 4</li><li>Cooling - Full (All Fans)</li><li>Print with a brim and a very small offset for better adhesion</li></ul>ENJOY!&nbsp;

Rod Sloth - Fits Most 3D Printers

Printer Tools

franceschellifederico

<blockquote>A compact stand for taking great product photos with the right background!</blockquote>I redesigned <a target="_blank" href="https://www.thingiverse.com/thing:5212231" rel="nofollow noopener">this</a> “Photo Studio Stand” from scratch, making some modifications.This model should be useful for your photos.Use this model with A4 sheets!A3 versione <a target="_blank" href="https://makerworld.com/it/models/51765#profileId-53517" rel="nofollow noopener">here</a>.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377716/2023-10-29_ce442251c1177.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377716/2023-10-29_0ed95e1e1dbed.png"></figure>

Model Layout

Fun

Organizers

Printer Tools

Tools