lilly

Grumpy Ol Vet Printing

I modeled this using Fusion 360. The gears are a little loose by design. I wanted them to spin faster. Feel free to adjust or scale to make it more comfortable for you. I recommend a drop of glue just to be safe. I put the parts on two separate plates so those without an AMS could print the housings and the gears in different colors. I think it looks better that way.

Fidget Gear Ring v2

plate pattern

MAK3D4U

Are you looking for a unique and thoughtful gift? Or perhaps you want to add a personal touch to your everyday essentials? Look no further! The Bambulicious name tag is the perfect solution. You can change the name, font, colors and some visuals. Buy some keychain rings (i&#39;ve got mine from AliExpress) and you&#39;re good to go.&nbsp;How did I make the one in the picture?<ul><li>Download OpenSCAD</li><li>Download the font <a target="_blank" href="https://fonts.google.com/specimen/Lobster+Two" rel="nofollow noopener">Lobster Two</a> and install it for all users (on windows)</li><li>Open OpenSCAD (restart after install a new font, so it&#39;s loaded)</li><li>Copy/paste the code from the customizer</li><li>Change the name, the font, other parameters. (Color is not relevant in OpenSCAD)</li><li>Render the model &gt; export the model as .3mf or .stl</li><li>Open the model in BambuStudio (or Orcaslicer)</li><li>Select the model, right click &gt; Split &gt; To parts</li><li>Select the name parts and give it the color filament you want.</li><li>Select the outline part and give it the color filament you want.</li><li>Change the quality settings to what you like. (mines are: 0,2 mm / 2 walls / ironing all top surfaces / 10% infill gyriod)</li><li>Connect the keychain rings and you&#39;re ready! Share this model and spread the fun! Checkout my other models: <a target="_blank" href="https://makerworld.com/en/models/488704" rel="nofollow noopener">The Scrabble Coaster</a></li></ul>

Bambulicious Name tag

Haydn Bao

This adapter allows you to use Meta Quest 2 head straps with the new Quest 3.&nbsp;Instructions: Download 'no loop Meta Quest 3 Head Strap adapter v4.3mf" and print with supports. <ul><li>For extra safety, you can put a cable tie around it, it is the default version. See last image. </li><li>Download raw file for the one without the loops.</li><li>If it clips on too tight, reduce flow ratio or flow rate multiplier in your slicer by 5-10%. If too loose, increase flow rate.</li></ul>I will continue to improve it's durability as I use it myself. Be sure download the latest files before printing. &nbsp;Enjoy, Haydn Bao &nbsp;[UPDATE] - V5 STEP version uploaded. &nbsp;From v4 to v5, the geometry updates are minor. There's just a few extra fillets. Between space confinements and tolerance differences of everyone's printers, v4 is working quite well according to feedback. So v4 is still the default print file.&nbsp;For those new to cad, you can upload this into a free cad like fusion360, disable capture design history, and edit all it's dimensions like thicknesses and radii etc using 'q' push command.&nbsp;Here were some considerations I had when tweaking it:- If it's thickened too much, it won't flex as easy and bulge the side arms more. - If you twist the model in 3D, it won't have a good print orientation that prints as strong. - If you remove the slots. The body isn't weak enough to twist to conform.&nbsp;&nbsp;View my other models here!<a target="_blank" href="https://makerworld.com/en/models/17526#profileId-16299" rel="nofollow noopener">FREE ITX NAS Enclosure</a>&nbsp;&nbsp;

Meta Quest 3 to Quest 2 Head Strap adapter

actually useful

Nardo3D

Beware of immitators!  This is the ORIGINAL Modular Mini-Golf game on MakerWorld!&nbsp;The most important part of working in an office is avoiding doing actual work! Procrastinate all day long with Nardo's Modular desktop mini-golf set! Arrange dozens of tiles to create unlimited unique miniature golf holes.&nbsp;Featuring a grid-based modular design (heavily inspired by the Gridfinity system-but much smaller). Includes nearly two dozen unique tiles, with more to come in the future!&nbsp;Putter is designed to fit on the end of a standard Bic “Round Stic” style pen.&nbsp;UPDATE 1/24/2024 - Updated tile quantities based on feedback & testing, as well as a more robust putter design! Ball not included - I recommend a 9 to 10 mm plastic ball bearing (easily found on Amazon) or you can try printing a 10mm sphere.&nbsp;Tip: A vacuum pen (example: <a target="_blank" href="https://www.amazon.com/YXQ-Vacuum-Sucking-Suction-headers/dp/B07MLW5TKP" rel="nofollow noopener">https://www.amazon.com/YXQ-Vacuum-Sucking-Suction-headers/dp/B07MLW5TKP</a>) makes lifting the flat tiles a breeze!&nbsp;Choking Hazard! Small parts, not for children under 3!

The ORIGINAL Modular Desktop Mini Golf Set

multi plate prints

星云丿长歌

这是我的世界中的TNT方块模型，顶部导线是凸起的，需要使用红，黑，灰，白四色，并且使用AMS设备。This is a TNT block model in Minecraft. The top wire is raised, red, black, gray, and white are used, and AMS devices are used.

Minecraft TNT

multi color prints

Bambu Lab

This is a spool holder for Bambu filaments.

Bambu Spool

long prints

cale.lebl

<div><h1>Summary</h1><div>This wall set is a variation of our original set and has details on both sides of the walls. This way you can build out larger areas without having blank faces. It also includes terminations for the large pipes that are coming out of the doors and along the walls. Original set is linked below.Original Walls: <a href="/thing:4781447" rel="nofollow">https://www.thingiverse.com/thing:4781447</a>Here are some of the other Spaceship sets as well:Cargo Set: <a href="/thing:4836705" rel="nofollow">https://www.thingiverse.com/thing:4836705</a> Test Tube Set: <a href="/thing:4836700" rel="nofollow">https://www.thingiverse.com/thing:4836700</a></div></div>

Modular Space Ship/Sci-Fi Corridor Wall Set 1.5

space

AJAX3D

This model was created using the original art found here <a target="_blank" href="https://www.thinkfun.com/wp-content/uploads/2014/10/Dragon-Illusion-BBC.pdf" rel="nofollow noopener">Dragon-Illusion-BBC (thinkfun.com)</a>. Once printed, I heated the print along the marked lines with a heat gun that was set to 220c (if printed in anything other than ABS you may need to lower this temp). Once the plastic was soft, I folded the plastic to the correct position (may require some adjusting) I then put a little super glue on the three folded tabs. On it's own, this does not stand up too well. I just placed a little double sided tape under the tail and stuck to the table. You could easily super glue the tail down to a printed platform.&nbsp;FoldingWhere it says "Mountain Fold" this is referring to the side you view the dragon from. See image below to help identify the correct direction of the folds.<img src="https://makerworld.bblmw.com/makerworld/draft/370539/2024-01-06_b15aff33c62e3.png">&nbsp;See the Illusion<ol><li>View from about 2 ft</li><li>Close one eye</li><li>Look into the eyes of the dragon</li><li>Rock back and forth. WOW!</li></ol>&nbsp;Print SettingsPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmFilaments Used: ABS Overture Black Transmission Distance: 0.2 ABS Overture Blue Transmission Distance: 2.4 ABS Overture Light Blue Transmission Distance: 4.8 ABS Overture White Transmission Distance: 4.7Swap Instructions: Start with Black At layer #13 (0.64mm) swap to Blue At layer #20 (0.92mm) swap to Light Blue At layer #32 (1.4mm) swap to White for the rest.

Dragon Illusion HueForge

hueforge

TrendtB

A print-in-place hanger for your Make My Sign designs to swing! Customize your sign using Make My Sign, and proudly display it with this handy model!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/208543/2023-11-27_952f46ec94abc.gif"></figure>&nbsp;I designed this hanger as a quick and easy way to display your creations from <a target="_blank" href="https://makerworld.com/en/makerlab/makeMySign" rel="nofollow noopener">Make My Sign</a>.&nbsp;<h3>PERFECT FOR</h3><ul><li>Table numbers for cafes, weddings, or your next party!</li><li>Social/status indicators for your desk (Do not disturb, be right back, etc.)</li><li>Warning signs and labels for equipment in use, under maintenance..</li><li>QR codes for Wi-fi, menus, and sign-in</li></ul>&nbsp;<h3>FEATURES</h3><ul><li>Quick print-in-place design</li><li>Folds down flat for easy storage</li><li>Only 6.4g of filament for the frame!</li><li>Opens up to 60 degree spread for stability</li><li>Can hang up to 3 signs if you want to keep variants together</li></ul>&nbsp;<h3>INCLUDED SIGNS</h3>I've included a bunch of signs to get you started, all generated through Make My Sign. Some were based on custom SVGs designed in Figma.Each sign is on a separate plate so you can pick and choose which ones you want to print.<ul><li>Back Soon status</li><li>Focusing status</li><li>Working status</li><li>Chatty status</li><li>In Progress status</li><li>Printing status</li><li>Table number</li></ul><figure class="image image_resized" style="width:69.87%;"><img src="https://makerworld.bblmw.com/makerworld/draft/208543/2023-11-27_88e345b892073.png"><figcaption>Multiple “Make My Sign” designs included</figcaption></figure>Sign designs powered by Make My Sign from MakerWorld(makerworld.com/makerlab/MakeMySign)&nbsp;<h3>HOW TO CUSTOMISE YOUR SIGN</h3>Go to <a target="_blank" href="https://makerworld.com/en/makerlab/makeMySign" rel="nofollow noopener">Make My Sign</a> and create a new design. The design supports signs with the following specifications: <ul><li>Rectangle plate, 1mm thick (default thickness)</li><li>60mm width</li><li>UP TO 65mm height</li><li>ON THE BOUNDARY, DOUBLE TOP holes, 4mm</li></ul>Make My Sign settings:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/208543/2023-11-27_cf98ee3e809e7.png"><figcaption>Plate configuration for making your own sign, compatible with this stand</figcaption></figure>You can then export the .3mf file and print your new sign to hang!&nbsp;&nbsp;&nbsp;&nbsp;

Print-in-Place Hanger for Make My Signs

random

The3DSportsBeard

My wife loves Monarch butterflies and so I started with the monarch wing earrings and she loved them so much I decided to make several other wing shapes as well. You can do multiple color combinations or delete the color layer via the slicer if you just want to print the “border” for a different style of earring.  These print best with a .2 nozzle but several of the ones pictured were printed on a .4 mm nozzle and they still look good just not quite as good as the .2 ones. There are negative parts for the hole so that you can easily adjust the size of the hole depending upon your needs. They are defaulted to 1.25 mm as that is what worked best for the earring parts that I had on hand. Happy printing! Commercial license available here: <a target="_blank" href="https://www.patreon.com/The3DSportsBeard" rel="nofollow noopener">https://www.patreon.com/The3DSportsBeard</a> Appreciate my designs? Buy me a beer: <a target="_blank" href="https://buymeacoffee.com/the3dsportz" rel="nofollow noopener">https://buymeacoffee.com/the3dsportz</a>

Butterfly Wing Earrings - 9 Different Styles

jewelry

Andruha

<h2>small magnetic vase</h2>My daughter picks flowers for her mom almost every day. These are usually small dried flowers that she picks from the garden. So that they don&#39;t always just lie there somehow, I made a small magnetic vase. The size of the holes for the magnets are 6.2 * 2.2 mm.Since the flowers only last a few days, you can always replace them quickly and easily.&nbsp;Important: The small vases are not waterproof.

Magnetic vase for dryflower

gifts

Bearded Printer

Update May 07, 2024: Updated profile to exclude supports on the main model, leaving the wings as the only objects that have supports.&nbsp;Featuring my latest design, a baby dragon, you can add this cute little guy to your arsenal of dragons!&nbsp;Discover the joy of 3D printing with our Baby Dragon 3D model! Crafted meticulously by Bearded Printer, this model is an ideal embodiment of precise, articulated design.&nbsp;This adorable Baby Dragon model accommodates both single and multi-material printers providing a versatile option for all.For single-material printers, the model can be printed in individual components and assembled post-printing - a fantastic opportunity for color creativity.

Baby Dragon - Articulated Dragon

Lil guys

Michal

A compact poop container (S - small version) designed for the Bambu Lab A1 and A1 mini printer. Very easy to attach and remove from the printer.A larger version of the basket is available at this link: <a target="_blank" href="https://makerworld.com/en/models/501368#profileId-416430" rel="nofollow noopener">https://makerworld.com/en/models/501368#profileId-416430</a>&nbsp;UPGRADE 19.06.2024According to your comments, I made the following changes: 1. Yellow arrows - latches have been added to prevent the basket from sliding during vibrations. 2. Red arrow - the shelf on which poop was sticking has been removed. 3. Green arrow - the wall has been raised to further protect the poop from falling out. 4. The height of the basket has been increased by 5mm to increase its volume.5. To make the basket quieter, you can cut a thin sponge and stick it to the bottom from the inside.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000451897/design/2024-06-19_7865e4dc0924e.jpg"></figure>

Compact poop bucket S (A1, A1 mini)

printer

MadMax3D

Kit card phone holder with eight different graphic designs. Hand them out to friends, family and coworkers, they'll love you for it! Each one takes about an hour to print and requires simple assembly. I have included one profile containing all 8 designs (plus a blank) as well as profiles for each one separately. They can be printed on all A,X and P series Bambu printers. I have included both the raw stl and a step file if you want to add your own designs or use a different printer.&nbsp;If you like this kit card and would like a different design, please let me know in the comments or messaging app, and I will try to upload a new profile with your design. &nbsp;Printing Instructions&nbsp;If you are new to Bambu, the initial project can look a little daunting since I have included all the colors necessary for all the designs. When you open the project file, set your printer type and plate type. I used a textured plate, but smooth plates will work as well. Once you have selected your printer type, make sure the correct printer is selected on the device screen. At this point I recommend NOT SYNCING your filaments as this will rearrange all the colors to match your AMS(s). Simply select a filament drop down and select a matching color (or other color) from your AMS as shown in the pic below.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/568315/2024-02-22_84fe651081967.png"></figure>Assembly Instructions&nbsp;Remove the two sides and four struts from the kit card. Remove the nibs with small dykes or a blade. Fit the struts into the sides and snap together. Use a drop of CA glue where the strut meets the side to make it stronger. The tolerances were optimized for PLA on my filament profiles, so they may be a little looser or tighter with different materials or calibrations.

Phone Holder Kit Card - 8 Designs

kit cards

Billrobland

Chain Links i use for Oversized Logos very easy to assemble and print quick. Put the last 2 links together then spin one link around and pull the 2 links attached to the center link past eachother this allows the chain links to not come apart.

Chain Links For Logo's With Video

silly goofy

RileyDesigns

This is snake scale chainmail, a print in place multi-use flexible fabric. This chainmail can be used from anything from a satisfying fidget toy to an integral part of you cosplay or costumes. This model is strong so feel free to play till your hearts content or weather it to deataile a costume. This model can be colored via bambu studio. For best results use a small layer height, but .2 works just fine. If there are any shapes you would specifically like I'd be happy to make them and upload it as a profile.&nbsp;MeasurementsEach side of the hexagon is 7mm in lengthDistance from center to center to link the chainmail together should be 13.25mm horizontally, and to get the second row of chainmail is over 6.625mm up 11.5mm. Do not reduce the distances lower than that or the scales will fuse together.

Snake Scale Hexagonal Chainmail - Print in place

fabric

rdgqm6bcsp

Dice set for Dnd, credits:<a target="_blank" href="https://www.printables.com/it/@Udos3DWorld" rel="nofollow noopener">Udo's 3D World | Printables.com</a>

DND dice set

dice

Asphalt3D

The Credit Card Cutlery Kit is a compact culinary companion crafted for convenience and cleverly concealed within a credit card frame.The size of a credit card, the kit fits in your wallet and can be used in an emergency when you forget to bring utensils. AssemblyThe fork and spoon fold like origami to create an ergonomic head angle and improved scooping volume. The three dots latch the fold to add structural strength and rigidity.You do not need to crease the fold along the entire length of the handle. Creasing along the latch area is sufficient.Creasing closer to the head will increase the head angle and spoon volume, but too much creasing may cause the thin folding layer to split.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/156756/2023-11-09_cjjrqzz5dxlr.gif"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/156756/2023-11-09_bpxswfo3atnz.gif"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/156756/2023-11-09_3gvezqkaat1b.gif"></figure>PrototypesOver 60 prototypes were printed in the process of finding a balance between strength, ergonomics, reliability and print speed.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/156756/2023-11-09_9ff0mhgpd1z0.png"></figure>Food SafetyWhile PLA is considered food safe, it is not recommended to reuse this cutlery - it is intended for one-time emergency use.We also don't know how clean your wallet is, so it's your call whether using currency-crusted cutlery is cleaner than using your hands.PrintingPrint-in-place, no supports.Designed for 0.15mm layer height with a base layer of 0.20mm.Test-printed on the Prusa Mini with PLA, completed in 35 minutes.

Credit Card Cutlery Kit

pfofit

DKprints

A spinning bathroom sink organizer! The two ends of the organizer rotate in order to privide better access to whatever you choose to store! Prints on one plate and requires a push fit assembly of the four small legs into the holes in the bottom of the organizer. Happy Printing!

Spinning Bathroom Organizer 

storage

HpInvent

I have designed a beautiful decorative vase for the interior of your car.  This way, you can always have a touch of nature with you in your car.  The vase is perfect for small dried flowers or real plants/flowers by adding some water.For those who want to use a flower that requires no care at all, I have created a rose for you. Simply print it and insert a piece of 1.75mm filament as a stem into the printed plant head. I left the filament piece of the stem slightly longer at the bottom and bent it by hand into 2-3 arcs. This way, it holds better in the vase and is less likely to fall out. (see photos)&nbsp;The set currently consists of 6 different vases, which I would like to expand in the future. Feel free to write wishes or suggestions in the comments.The Vase/Ring on the left side of the bed is for Glass Test tubes  so you can use these Standard Test tubes (16mm) as Vase in the car.  UPDATE 09.04.2024: V2 uploadedI completely redesigned and improved the mechanism to attach the clip to the vases.  Now it is possible to use the same clip for horizontal and vertical grilles and make it more stable. It also eliminates the tolerance issues that may have occured. Some pictures still show the old mechanism.  But from now on you can only download the improved version. VASE 2 Collection now also available under Print profiles!  <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420781/design/2024-04-09_2e379dd809f58.png"><figcaption>Improved attachement System (V2)</figcaption></figure> Additionally, the individual elements can also be downloaded separately through the print profiles. Dependent on your print bed adhesion it may be necessary to print the rose with a brim.I printed a bunch of roses on A1 Mini and X1C without any problems, but got some feeback from users that needed a brim for the rose to stick.&nbsp;Due to many requests for commercial licenses for my 3D models I created a patreon page. You can become a member to get permission for commercial use or just want to support my work : <a target="_blank" href="https://www.patreon.com/user?u=79128277" rel="nofollow noopener">https://www.patreon.com/user?u=79128277</a>&nbsp;Also check out my other Designs!I have a bunch more stuff in my profile!! <a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener">https://makerworld.com/en/u/3624704578</a><a target="_blank" href="https://makerworld.com/en/models/428498" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420781/design/2024-04-15_f027d438d0393.png"></a><a target="_blank" href="https://makerworld.com/en/models/426994" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420781/design/2024-04-15_b0f8912a15393.png"></a><a target="_blank" href="https://makerworld.com/en/models/427979" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420781/design/2024-04-15_b1e75bac7bd51.png"></a><a target="_blank" href="https://makerworld.com/en/models/416941" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420781/design/2024-04-08_ebe2de8bae1b3.png"></a><a target="_blank" href="https://makerworld.com/en/models/232706" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420781/design/2024-03-06_ea517b7dbe741.png"></a><a target="_blank" href="https://makerworld.com/en/models/394559" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420781/design/2024-03-27_3b061a50c97b7.png"></a> <a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420781/design/2024-03-08_a8a626fc04c78.png"></a>  &nbsp;&nbsp;&nbsp;Happy printing!

Mini Car Vase SET with Rose / Diff. Vases pots

K2_Kevin

<h2 style="text-align: center">MakerChips!</h2><h2 style="text-align: center">9 Styles for your customizing pleasure!</h2> (More “decorations” coming soon, be sure follow &amp; check back.)Everyone wants a unique Maker Chip - so play with a variety of style options and create your own!&nbsp;<figure class="table" style="width: 100%"><table class="ck-table-resized" style="background-color: hsl(90, 75%, 60%); border: 4px groove hsl(120, 75%, 60%)"><colgroup><col></colgroup><tbody><tr><td style="text-align: center">Don&#39;t forget to Follow! Thank you so much for your Downloads, Like and BOOSTS!</td></tr></tbody></table></figure>MakerChip Decorations:<ol><li>K2_MakerChip_v1-Decoration_3mm.stl - Chip Decoration</li><li>K2_MakerChip_v2-Decoration_3mm.stl - Chip Decoration</li><li>K2_MakerChip_v3-Decoration_3mm.stl  - Chip Decoration</li><li>K2_MakerChip_v4-Decoration_3mm.stl  - Chip Decoration</li><li>K2_MakerChip_v5-Decoration_3mm.stl - Chip Decoration</li><li>K2_MakerChip_v6_Decoration_Gear.stl  - Chip Decoration</li><li>K2_MakerChip_v7_Decoration_BigGear.stl - Chip Decoration</li><li>K2_MakerChip_v8_Decoration_Circles.stl - Chip Decoration</li><li>K2_MakerChip_v9_Decoration_DashedCircles.stl - Chip Decoration</li><li>Sample_MakerChip-xxxxx.3mf - Sample Bambu Studio Projects</li><li>K2_MakerChip_v6_Inside_Circle-Decoration_3mm - Optional Inside color circle option - Place in center, change color on certain chip designs.</li></ol><figure class="table" style="width: 95.89%"><table class="ck-table-resized" style="border: 2px solid hsl(0, 0%, 60%)"><colgroup><col></colgroup><tbody><tr><td>DIY Instructions:<ol><li>Open Bambu Studio</li><li>Drag/Drop the Base Circle into slicer - K2_MakerChip_v1-Back.stl.</li><li>Add the version of Chip Decoration you want to use v1 - v3.</li><li>Center the Chip decoration</li><li>Switch to Objects view (In the Process dialog box in the slicer - Photo Included)</li><li>Select objects, right click and Merge.</li><li>Slice to check your MakerChip Top and Bottom!</li></ol></td></tr></tbody></table></figure>&nbsp;Adding your own logo:<ol><li>Create your logo as SVG or STL (You can use simple online tools to convert .png to .svg),<ol><li>Logo z-height only needs to be 0.6mm to 0.8mm.</li></ol></li><li>Drop your logo into Bambu Studio.</li><li>Flip your logo so it&#39;s face down. Change your view to look from below your MakerChip.</li><li>Size your logo (Easyier to use the scale/move tools in Bambu Studio) to fit your Maker Chip. You can scale, but be sure to maintain your .8mm height.</li><li>In the Objects view, select your logo, then select the assembly (so both are selected), right click and merge/combine.</li><li>Slice to verify you completed this correctly, and Print!</li></ol>Adding your own QR Code:<ol><li>I&#39;ve had great success using: <a target="_blank" href="https://genqrcode.com/generator/stl" rel="nofollow noopener">https://genqrcode.com/generator/stl</a> to create QRCodes.</li><li>Create your QR code as STL<ol><li>Size is 26mm for most chips (you can always scale in the slicer)</li><li>QR-Code z-height only need to be 0.6mm to 0.8mm.</li></ol></li><li>Size your logo to fit your Maker Chip. You can scale, but be sure to maintain your .8mm height.</li><li>Select the chip and flip it over, then center the QR-code from below like you did with your logo.</li><li>In the Objects view, select your QR-Code, then select the assembly (so both are selected), right click and merge/combine.<ol><li>Dont forget to flip it back over once merged.</li></ol></li><li>Slice to verify you completed this correctly, and Print!</li></ol>&nbsp;IMPORTANT NOTE: If you slice and you find an object is not being displayed.  Adjust the objects order in the merged assembly. Simply drag up/down and slice to see the results.&nbsp;&nbsp;&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000415825/design/2024-05-06_1a054b3cbdf4.png">&nbsp;

MakerChip - the new Maker coin

buisness card stuff

3DPrintifer

Light inspired by Alastor's mic cane from the show Hazbin Hotel. Light should come up from the bottom and be reflected off the back portion.

Hazbin Hotel Alastor Mic Lamp for Bambu LED Lamp Kit

fandom

mail.iou

Reverse Blade Collapsing Katana - Rurouni KenshinThis is a telescopic katana inspired by the Japanese comic &#34;Rurouni Kenshin&#34;. The parts are printed first and then assembled. You can choose to print different colors and intensities for different parts. The handle is covered for easy future maintenance and blade replacement. But the disadvantage of this is that the printing time will increase. If you don’t like separate printing and want to try print-in-place, you can refer to my previous telescopic knife work &#34;Reverse Blade Sword mini &#34;: <a target="_blank" href="https://makerworld.com/en/models/114630" rel="nofollow noopener">https://makerworld.com/en/models/114630</a> Notice 1. It is recommended to use PLA+、PETG for printing. 2. If your filament has insufficient strength, please increase the fill overlap to more than 40%. Assembly instructions: 1. Place the blades in order.2. Close the handle cover.3. Insert two pins to secure.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/816624/2024-04-05_875177ce7d12f.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/816624/2024-04-05_c7733b9e5bd43.png"></figure></td><td> </td></tr></tbody></table></figure>4. If you need to use the lid function, you need to bring four <a target="_blank" href="https://www.amazon.com/8mm-magnets/s?k=8mm+magnets" rel="nofollow noopener">8x2mm</a> magnets and use glue to fix the magnets in the four holes.<img src="https://makerworld.bblmw.com/makerworld/draft/816624/2024-04-05_3e9c49dc69878.png">&nbsp; Remark: A. If the pin is too loose, you can apply removable glue, such as Styrofoam, to the tip of the latch to facilitate removal during future repairs. B. If it is difficult to align the exit hole when the pin is inserted into the tool holder, you can use a blade to push in the direction of the hole to facilitate alignment of the exit hole. C. If the blade gets stuck while playing, you can try two methods: 1. Hold the top of the blade and the handle, pull the blade up first, and then slide it down to the handle and tap it. Go back and forth several times without using too much force to loosen the stuck blade. 2. You can put a few drops of silicone oil into the joint of the blade to lubricate it, and then use the first method.

Reverse Blade Collapsing Katana - Rurouni Kenshin

weaponry

Wing-Art

Arachnophobia?&nbsp;Spider-Catcher is a must-have for anyone uncomfortable with creepy crawlies, as it effectively captures them from floors, walls, or ceilings, allowing for quick and safe release outdoors.An extension option (for unlimited size) is also available - because size does matter. ;) I recommend printing the pyramid part in transparent PETG, of course you can print it in PLA, too. Usage:Place the Spider-Catch model over the spider and slide the flap on the underside to safely capture the spider.Transport the spider to a desired location and release it there by simply rotating the rod, which opens the flap, allowing for touch-free release. Just show me your Spider Catcher, I would be very happy to see it!___&nbsp;Spinnenangst? Spider-Catcher ist ein Muss für jeden, der sich bei Krabbeltieren unwohl fühlt, da es sie effektiv von Böden, Wänden oder Decken einfängt und eine schnelle und sichere Freisetzung im Freien ermöglicht.Eine Erweiterungsoption (für unbegrenzte Größe) ist ebenfalls verfügbar - denn Größe ist wichtig. ;) Ich empfehle, den Pyramiden Teil in transparentem PETG zu drucken, aber es geht natürlich auch in PLA.&nbsp;Anwendung:Platziere den Spider-Catcher über der Spinne und schiebe die Klappe auf der Unterseite zu, um die Spinne sicher einzufangen.Transportiere die Spinne an einen gewünschten Ort und setze sie dort durch eine einfache Drehbewegung der Stange, welche die Klappe öffnet, berührungslos frei. Zeigt mir eure Spider Catcher, würde mich sehr darüber freuen!

Spider Catcher - Insect Trap Stick

work

TomMi

Elf ears that hold and fit absolutely great! Enjoy role play gaming and DnD! Change color to cahnge race! :) Use hot water if you want to adjust your earlobes.&nbsp;please feel free to leave a comment, rating add a real photo

Elf ears

Brant

This is a six-petaled lily flower.&nbsp;&nbsp;Highlights:<ul><li>Great for home decor or other uses involving lilies</li><li>Two petal designs for you to choose between</li></ul><ul><li>The petals, stem, and base are all separate parts so you can print with different colors/materials</li><li>The stamen of the flower makes use of your printer&#39;s purge lines</li><li>The base is the same as in my <a target="_blank" href="https://makerworld.com/en/models/179039" rel="nofollow noopener">Lunar Tear model</a> if you would like to reuse it </li></ul>&nbsp;&nbsp;Printing notes and assembly:<ul><li>Pick a petal design to print<ul><li>Plate 1: Spiral petals<ul><li>Easier of the two to print (easier to break off supports near the center)</li></ul></li><li>Plate 2: Whorled petals<ul><li>More realistic like actual lilies</li><li>Supports near the center hole may be more difficult to compared to the ones in the spiral petals</li><li>From testing, I was able to get the supports off with tools and/or “punching a hole” through the support interface from the top of the petals using the stem&#39;s tip</li></ul></li></ul></li></ul><figure class="image image_resized" style="width:70.18%;"><img src="https://makerworld.bblmw.com/makerworld/draft/841927/2024-04-10_e71b060f964df8.jpg"></figure><ul><li>If making any changes, ensure the following:<ul><li>Petals have tree supports with a 45 degree threshold angle </li><li>Petals have adaptive layer height enabled</li></ul></li><li>To color the tip of the stem to match the petals, use an AMS or add a pause around height 146.00 to swap colors</li><li>From my testing, you may need a tiny bit of pressure to attach the petals to stem and stem to base but it should stay secure</li><li>For the stamen (center hole at the top of the stem), I’ve tested it to have a snug fit with around 4-6 purge lines (only 1-2 lines needed if you&#39;re resourceful with your folding/cutting)<ol><li>Fold each purge line in half</li><li>Insert the folded line into the base until no more can fit</li><li>Cut the lines to your desired length</li><li>Use your finger to press down into the center hole and fan out the cut lines</li></ol></li></ul>

Lily

trinket

Stickler

Following printing the very nice “Jumbo Gyro Fidget Spinner”, (<a target="_blank" href="https://makerworld.com/en/models/393051?from=search#profileId-294200" rel="nofollow noopener">Jumbo Gyro Fidget Spinner by 3DPrintBros - MakerWorld</a>), it needed a display stand to mount vertically. &nbsp;The stand is for the 100% full size spinner, and is a great “add-on” to display your spinner to the world.

Display Stand - Jumbo Gyro Fidget Spinner

fidget toy

This is dragon scale chainmail, a print in place multi-use flexible fabric. This chainmail can be used from anything from a satisfying fidget toy to an integral part of you cosplay or costumes. This model is strong so feel free to play till your hearts content or weather it to deataile a costume. This model can be colored via bambu studio. For best results use a small layer height, but .2 works just fine. I have included multiple models in the raw model files including a single piece so you can make your own custom shapes. Everything but the single chainmail link stl file is reduced so it slices fast so beware of using high resolution shapes with this model (before this model was redeuced at a 20x20 chainmail it was over 34 million triangles). If there are any shapes you would specifically like Id be happy to make them and upload it as a profile.&nbsp;MeasurementsEach side of the hexagon is 7mm in lengthDistance from center to center to link the chainmail together should be 13mm horizontally, and to get the second row of chainmail is over 6.5mm up 11mm&nbsp;Commercial licenseI have a commercial license available at <a target="_blank" href="https://cults3d.com/en/3d-model/fashion/dragon-scale-chainmail-commercial-use" rel="nofollow noopener">https://cults3d.com/en/3d-model/fashion/dragon-scale-chainmail-commercial-use</a>feel free to send me a message on Makerworld to confirm this is the right model. Or send me a DM for a comercial lisence if you dont want to go through cults3d :)

Dragon Scale Hexagonal Chainmail - Print in place

cosplay 

frizzl3Dmama

Meet your new desk buddy!  This fidget desk plant is the perfect way to bring the springtime joy indoors and right to you. Place the stems into the holes in any arrangement you like. Each of the leaves and petals are articulated for additional movement, and the vine includes a print-in-place chain. Whether you&#39;re pausing for a break or mulling over a problem, this fidget-friendly design not only boosts productivity but also adds a touch of fun to your workspace. I am really proud of this model at this point in my 3D modeling journey but I also already have so many ideas for future improvements and variations. If you have ideas, please let me know in a comment! And if you print this design, please consider sharing your photos here. I&#39;d love to see how they come out!&nbsp;Happy Spring!