ideat0m

<a target="_blank" href="https://makerworld.com/en/u/1897072971/collections" rel="nofollow noopener">More puzzle in my collections.</a> ---------------------------------------------------- This is a AMS version, normal version you can find in my collectionInsertion puzzles allow children to develop their motor skills and orientation in the shapes of objects. Individual parts are inserted into their place in the base. The parts fit together beautifully and simply. Can also be used as a decoration. Before use, I recommend that you check whether the printed object has sharp edges, or tear them off with the help of a knife for pulling the edges or with sandpaper **************************Totoje verze pro multibarevny tisk. Normalni verzi bez AMS jednotky naleznete mezi soubory v mem profiluVkládací puzzle umožňuje dětem rozvíjet jejich motoriku a orientaci v tvarech předmětů. Jednotlivé části se vkládají na své místo v zakladne. Díly do sebe krásně a jednoduše zapadají. Lze použít také jako dekoraci.&nbsp;Doporucuji pred pouzitim overit zda vytisteny objekt nema ostre hrany, tyto pak pripadne strhnout pomoci noze na stahovani hran pripadne smirkovym papirem <a target="_blank" href="https://makerworld.com/en/u/1897072971" rel="nofollow noopener">Mnoho dalsich naleznete v mem profilu</a>

AMS - Bart with skate - insert puzzle for kids-AMS

Puzzle

Skull keychain, 3 colorfor AMS, also for layer color changeincluded 3MF for Bambu Studio, STL for other slicers0,2mm layer (first layer 0,2mm, rest 0,2mm) AMS: just choose 3 colors layer change: 1mm and 1,6mm high for change PLA works pretty well

Skull RED keychain

keychains

Makerbot (or Creality) Dog. Resized to 20 cm. Hollow model with 2mm shell. From buttom is cover for remove coins from inside, top is hole for coins. U can also print only model without coin hole, just dog.22/07/22 Added new model (VAR D) include new cover for removing the coin (thread). New, modified bottom part model&nbsp;&nbsp;02-07-2022Added new bottom coin cover with thread: COVER-BOTTOM-V2.STL COVER-BOTTOM-V2.STLtwo-part system. the larger part with an internal thread is glued directly to the piggy bank with the help of superglue, the remaining part serves as a lid (with an external thread, smaller) and is screwed into the glued partbefore use, I recommend lubricating the thread with dry soap&nbsp;&nbsp;3D PRINTING SETTINGSPrint without supports Printed on MK3S with 0,6 nozzle/0.2, 0.3, 0.35 layer high PLA is good enough for this model. If u use bottom cover, u need use also 4x legs (simple with superglue) ------------------------------------------------------------------------------------------ Makerbot (nebo Creality) pes. Velikost upravena na 20 cm. Dutý model s 2mm pláštěm. Ze spodní části je kryt pro vyjmutí mincí zevnitř, nahoře je otvor na mince. Lze také vytisknout pouze model bez díry na mince, jen pes.22/07/22 Pridan novy model. Nove uzavirani, zvetsene, na zavit. vnitrni zavit soucasti modelu (VARIANTA D)&nbsp;02-07-2022Přidán nový spodní kryt na mince se závitem: KRYT-DNO-V2.STL KRYT-DNO-V2.STLdvoudílný systém. větší část s vnitřním závitem se přilepí pomocí vterinoveho lepidla přímo na prasátko, zbývající část slouží jako víko (s vnějším závitem, menší) a přišroubuje se do lepené částipřed použitím doporučuji zavit namazat suchým mýdlem&nbsp;NASTAVENÍ 3D TISKUTisk bez podpory Tištěno na MK3S s 0,6 tryskou/0,2, 0,3, 0,35 vrstvy vysoké PLA je pro tento model dostačující. Pokud používáte spodní kryt, musíte použít také 4x nohy (jednoduché pomoci vterinoveho lepidla)&nbsp;&nbsp;

DOG COIN BANK / (PIGGY BANK)

piggy bank

Place the numbers 1-19 in the base, make the numbers in each row or each column add up 38<a target="_blank" href="https://makerworld.com/en/u/1897072971/collections" rel="nofollow noopener">My others collections</a>---------------------------------&nbsp;Umístěte čísla 1-19 do základny, čísla v každém řádku nebo sloupci dejte dohromady 38&nbsp;<a target="_blank" href="https://makerworld.com/en/u/1897072971/collections" rel="nofollow noopener">Moje dalsi modely naleznete zde</a>

Aristotle’s Number - Puzzle Board - Logic Number Game not only for kids - 38

Puzzle with AMS

About two months ago, I bought new components for my computer. So I wondered what to do with the old ones who weren't completely useless yet. I found this information: <a href="https://smallformfactor.net/forum/threads/completely-3d-printed-11l-m-atx-case.10332/" rel="nofollow">https://smallformfactor.net/forum/threads/completely-3d-printed-11l-m-atx-case.10332/</a> but only the skeleton was part of the download. So I've done the rest, I've been running this PC in a 3D printed case for over two months now, running on the Internet and watching a movie / light gaming. components I used: GA-B150M-D3H, i5-6600, 2x4GB DDR4, PSU Fortron SFX FSP350-50SAC - 350W, bulk and NVMe Apacer AS2280P4 256GB I used some M3 screws and M3 nuts to mount the case. I used super glue to attach the frame reinforcement There is a possibility to print a transparent side or full. At the transparent, I assume a 2-3mm glass with dimensions of 170x220mm (I haven't tried it, the PC is currently running without a left side) For the Power / HDD lights I used ordinary diodes, from an old PC, one spring (I have no idea the size, I found something in the press), the Power button is printed with Natural PLA, so the lights shine. When using a graphics card (I use a built-in CPU) it is necessary to buy a PCIe riser, and of course to use a graphics card that will suit its dimensionsCurrently not done: - front USB ports - front audio ports - Covering the slot for expanded cardsYou will find all STL files in the file archive, as well as a Fusion 360 file and a STEP file.Used material: PLA Gembird Galaxy Blue, PLA GST3D Black Edition White Printed on homemade MK3S, 0,3 layerdetail Power button:https://youtu.be/Nv3aDcT0j0c <a href="https://youtu.be/LskDAspXJ8Y" rel="nofollow">https://youtu.be/LskDAspXJ8Y</a> **********************************************Asi dva mesice zpet jsem koupil do sveho pocitace nove komponenty. Tak jsem si rikal co se starymi, ktere jeste nebyly uplne k nicemu. Nasel jsem tyto informace: <a href="https://smallformfactor.net/forum/threads/completely-3d-printed-11l-m-atx-case.10332/" rel="nofollow">https://smallformfactor.net/forum/threads/completely-3d-printed-11l-m-atx-case.10332/</a> soucasti souboru ke stazeni byl ale pouze skelet. Tak jsem si dodelal zbytek, aktualne jiz pres dva mesice tento PC ve 3D vytistene skrini provozuju na internet a sledovani filmu / lehky gaming. komponenty, ktere jsem pouzil: GA-B150M-D3H, i5-6600, 2x4GB DDR4, PSU Fortron SFX FSP350-50SAC - 350W, bulk and NVMe Apacer AS2280P4 256GB K montazi case jsem pouzil nejake M3 srouby a M3 matice. K pripevneni dilu na zpevneni ramu jsem pouzil super glue K dispozici je moznost vytisteni pruhledne bocnice nebo plne. U pruhledne predpokladam sklo 2-3mm o rozmerech 170x220mm (nemam vyzkousene, pc aktualne provozuji bez leve bocnice) Pro kontrolky Power/HDD jsem pouzil bezne diody, ze stareho PC, jednu pruzinku (rozmer netusim, nasel jsem neco v supliku), tlacitko Power je vytisteno s Natural PLA, takze kontrolky prosvitaji. Pri pouziti graficke karty (ja pouzivam integrovanou v CPU) je potreba poridit PCIe riser, a samozrejme pouzit takovou grafickou kartu, ktera ktera bude vyhovovat svymi rozmeryAktualne neni hotovo: - predni USB porty - predni audio porty - zakrytovani slotu pro expanded kartyV archivu souboru naleznete vsechny STL soubory, dale je k dipozici Fusion 360 soubor a STEP soubor.Pouzity material: PLA Gembird Galaxy Blue, PLA GST3D Black Edition White

COMPLETELY 3D PRINTED 11L MATX CASE -SFX PSU

mixmix

Replace for destroyed Dust Cover - REVOX A700&nbsp;The pin headers on print plate #2 that the cover fits onto are printed from TPU95A. But I think they will also be made of PLA, however, there is a greater chance of mechanical damage or wear will occur during frequent use (removing/putting on the cover). Plate 1 is a model for AMS, Plate 3 is a model without a logo for monochrome printing. After printing, it is necessary to insert M3-12 screws with a cylindrical head into the cover.It is a plastic, cosmetic part, so I recommend taking it down and putting it on with caution. A large force can destroy this part.

Revox A700 Head Dust Cover - AMS/noAMS

Reel2Reel / ReeltoReel

Mercedes - Car Logo

Vehicles etc..

<a target="_blank" href="https://makerworld.com/en/u/1897072971/collections/642009" rel="nofollow noopener">My "2D Wall Art" collection</a> Simple 2D WallArt - Panda with Bamboo1mm thin.You need enable detection thin wall in slicer. Ofc 3mf has this option on.Wait for the printing plate to cool down before taking the model down.

Wall Art - Panda with Bamboo

2D Wall Art

New model printed on A1 mini with strongest walls ************************** I have prepared a new model that should be able to be printed on A1 Mini without any problems - size 176x176x140mm Of course, the wall is thicker - 1.6 mm - and also the extrusion on the larger side to make it stronger. Printing time on A1 mini is approx. 3.5 hours.  Pripravil jsem novy model, ktery by mel jit bez problemu vytisknout na A1 Mini - velikost 176x176x140mm Samozrejmosti je silnejsi stena - 1,6mm - a take prolis na vetsi strane, aby se zpevnila.  Cas tisku na A1 mini je cca 3,5 hodiny.

A1 mini Poo (poop) box - big one - (176x176x140mm)

A1 mini / A1 mix

<figure class="media"><div data-oembed-url="https://youtu.be/GB0jTNkpY6I"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/GB0jTNkpY6I" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Simple mechanics - gears that rotate together can be controlled by either wheel.Gears can be arbitrarily distributed on prepared pins, but only one option after turning one wheel turns all wheelsThe crank gear requires a combination of several parts and an M3-8 bolt.Before use, I recommend that you check whether the printed object has sharp edges, or tear them off with the help of a knife for pulling the edges or with sandpaper.&nbsp;<a target="_blank" href="https://makerworld.com/en/u/1897072971/collections" rel="nofollow noopener">More puzzle in my collections.</a>---------------------------------------------------------------------------Jednoducha mechanika - ozubena kola, ktere se toci spolu, lze ovladat kterymkoliv kolem.  Ozubena kola lze libivolne rozmistovat na pripravene piny, ale pouze jedna moznost po otoceni jednim kolem otaci vsechny kolaOzubene kolo s klikou predpoklada kombinaci nekolika dilu a sroubu M3-8.Doporucuji pred pouzitim overit zda vytisteny objekt nema ostre hrany, tyto pak pripadne strhnout pomoci noze na stahovani hran pripadne smirkovym papirem.

GEARS for Kids - (Little Mechanic)

Little Mechanic

<a target="_blank" href="https://makerworld.com/en/u/1897072971/collections" rel="nofollow noopener">You can find more of my models in the collection section</a>-----------------------------------------------------------------------------------EN:A simple game similar to Pairs / Concentration or Memory where you need to remember the placement of individual stones/figures according to colors.The playing area has 24 fields and 6 x 4 colored sets of pieces.Players take turns rolling a die that is equipped with 6 different colors, which are the same as on the bottom of the figures.A simple rule says “YOU ROLL THE DICE AND YOU CAN TAKE ONE PIECE FROM THE MAT. If the piece has the same color as the one on the die, the piece is TVA. If it does not have the same color, it is the turn of the next player in order.Of course, as time progresses, more pieces are pulled out as you place them, and you can remember where the individual colors are located.You can play the game according to several different rules:Rule 1 – the player with the highest number of pieces winsRule 2 – it is possible to play in such a way that the player who puts together all 4 pieces of the same color wins the gameRule 3 – the player who first forms a team of 6 colors of pieces winsOf course, it is possible to come up with any other rule that you agree on with the other players at the beginning of the gameThe game trains the memory and brings fun for a long time. I believe that the game will interest you and you will have fun with it. In my opinion, the recommended age is 4-5 years and up to 99 😊------------------------------------------------------------------------------------------------Barevne kolecka pro kostku vlozte do kostky a zajistete lepidlem. ******************************************************************************************************Insert the colored parts for the cube into the cube and secure with glue.------------------------------------------------------------------------------------------------------------<a target="_blank" href="https://makerworld.com/en/u/1897072971/collections" rel="nofollow noopener">Vice mych modelu naleznete v sekci kolekce.</a>-----------------------------------------------------------------CZ:Jednoducha hra podobna pexesu, kdy je potřeba si zapamatovat rozmisteni jednotlivých kamenu/panacku podle barev.Hraci plocha ma 24 poli a 6x 4 barevne sady figurek.Hraci se stridaji v hodu kostkou, která je vybavena 6 ruznymi barvami, které jsou stejne jako na spodni casti figurek.Jednoduche pravidlo říká „ HODIS KOSTKOU A MUZES VYTAHNOUT JEDNU FIGURKU Z PODLOZKY. Pokud figurka bude mit stejnou barvu, jako je na kostce, figurka je TVA. Pokud nemá stejnou barvu, je na tahu další hrac v poradi.Samozrejme postupem casu se vytahuje cim dal tim vice figurek a je mozne si zapamatovat, kde jednotlive barvy jsou rozmisteny.Hru můžete hrat podle několik ruznych pravidel:Pravidlo 1 – vyhrava hrac, který ma nejvyšší počet figurekPravidlo 2 – je mozne hrat tak, ze hru vyhraje ten, kdo posklada všechny 4 figurky stejne barvyPravidlo 3 – vyhrava hrac, který nejdříve slozi druzstvo 6 barev figurekSamozrejme je mozno vymyslet jakekoliv jine pravidlo, na kterem se na zacatku hry dohodnete s ostatnimi hraciHra procvicuje pamet a prinasi zabavu na dlouhou dobu. Verim ze Vas hra zaujme a pobavite se u ni. Doporuceny vek dle mého nazoru je 4-5 let a vyse a to az do 99 😊*********************************************************************&nbsp;&nbsp;&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/pxnpkGtVnhs?si=Wy4rFgASk_NiQDWo"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/pxnpkGtVnhs" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;&nbsp;&nbsp;

Memory game

Board Games

Simply a brush holder. You can use any material, I printed from the rest of the filament. With a 0.28 layer, it is also relatively fast printing. Supports are not necessary, but you can use them if you want.***************************Jednoduchy holder na štětce. Muzes pouzit jakykoliv material, ja tiskl ze zbytku filamentu. Pri 0,28 vrstve se jedna i o relativne rychly tisk. Podpery nejsou potreba, ale pokud chces, muzes je pouzit.

Brush holder

Gadgets

Mercedes S - front - HueForge - 4 colors&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Gray At layer #12 (1.04mm) swap to Gray At layer #18 (1.52mm) swap to White for the rest.