ideaserved

FAYRON

Introducing the revolutionary F1 3D Printer Utility Knife, a cutting-edge tool designed for precision and versatility. Crafted through a collaboration between our team and Extrudr, a leading filament manufacturer, this utility knife combines innovative functionality with good looks.At the heart of this utility knife is its modular design, consisting of two main printable parts: the shell and the slide. Both components are meticulously engineered to ensure seamless integration and effortless blade replacement. The shell features hexagons for an ergonomic grip, providing comfort and control during prolonged use.The blade holder is designed with precision tolerances to securely hold the interchangeable blades in place. These blades are easily installable and removable.Smooth operation is a hallmark of this utility knife, thanks to its carefully engineered mechanisms. The blade holder incorporates two locking points, ensuring that the blade remains securely in place during use. This dual-locking system not only enhances safety but also provides peace of mind, knowing that the blade won&#39;t disengage unexpectedly.To further customize your experience, we&#39;ve incorporated three hardness levels for the locking levers, allowing you to adjust the tension to your desired preference. Whether you prefer a HARD, MEDIUM or SOFT feel, you can tailor the locking mechanism to suit your cutting style and comfort level.&nbsp;For Instructions on how to assemble it check out this video:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=UsXCuuASd_Q"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/UsXCuuASd_Q" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Get 20% off your next Order with Code: &#34; EX_FAYRON20 &#34; when Checkin Out on Extrudr&#39;s Website: <a target="_blank" href="https://www.extrudr.com/shop-eu/" rel="nofollow noopener">https://www.extrudr.com/shop-eu/</a>&nbsp;NOTE: Since the tolerances of this model are really tight, with less precise printers (Unlike Prusa or Bambulab printers) or hard to print materials, your knife might not be as fluid as it could be. In that case consider using some grease between the shell contact points and the slide to decrease friction.  RECCOMANDATIONS:<ul><li>Print with a nozzle not bigger than 0.4mm;</li><li>Print with a layer height not taller than 0.2mm;</li><li>We Recommend printing with PLA, MATT Filaments or CARBON FILLED Filaments for best results;</li><li>In PrusaSlicer (and most other slicers) → Print Setting → Infill → Enable Ironing: ON (For a smoother sliding experience, only really needed on the Shell);</li><li>In PrusaSlicer (and most other slicers) → Print Setting → Layers and perimeters → Avoid crossing perimeters: ON (to reduce stringing);</li><li>Print with at least 100% Infill;</li><li>Print with at least 3 Perimeters.  </li></ul>SHELL HARDNESS RECCOMANDATIONS:<figure class="table"><table><tbody><tr><td>Hardness Level</td><td>Recommended Material</td></tr><tr><td>HARD</td><td>For use with softer and more flexible materials like PETG, MATT Materials</td></tr><tr><td>MEDIUM</td><td>For use with harder and less flexible materials like PLA</td></tr><tr><td>SOFT</td><td>For use with Hard materials like CARBON FILLED Materials</td></tr></tbody></table></figure>*Different materials may give a different feel&nbsp;<figure class="table"><table><tbody><tr><td>NEEDED PARTS:</td></tr><tr><td>Reccomended SK5 Blades (Amazon IT): <a target="_blank" href="https://www.amazon.it/gp/product/B072LMYRP3/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&amp;th=1" rel="nofollow noopener">https://www.amazon.it/gp/product/B072LMYRP3/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&amp;th=1</a>Reccomended SK5 Blades (Amazon DE/AT): <a target="_blank" href="https://www.amazon.de/Bosch-Professional-Ersatzklingen-Trapezklingen-Kompatibel/dp/B095SVZR5S/ref=sr_1_4?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&amp;crid=2YR8JV5XTXO48&amp;dib=eyJ2IjoiMSJ9.NYpnJ9PXt0kd44akeLQLiTurFtiBKxB2QK-HmMrfbvXGjHj071QN20LucGBJIEps.C_MrRsbz814A7U33laI1kmRmm8w7JZZExeM3ZqGfqeA&amp;dib_tag=se&amp;keywords=goldblatt%2Bsk5&amp;qid=1711727945&amp;sprefix=goldblatt%2Bsk%2Caps%2C82&amp;sr=8-4&amp;th=1" rel="nofollow noopener">https://www.amazon.de/Bosch-Professional-Ersatzklingen-Trapezklingen-Kompatibel/dp/B095SVZR5S/ref=sr_1_4?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&amp;crid=2YR8JV5XTXO48&amp;dib=eyJ2IjoiMSJ9.NYpnJ9PXt0kd44akeLQLiTurFtiBKxB2QK-HmMrfbvXGjHj071QN20LucGBJIEps.C_MrRsbz814A7U33laI1kmRmm8w7JZZExeM3ZqGfqeA&amp;dib_tag=se&amp;keywords=goldblatt%2Bsk5&amp;qid=1711727945&amp;sprefix=goldblatt%2Bsk%2Caps%2C82&amp;sr=8-4&amp;th=1</a>Reccomended SK5 Blades (Amazon USA): <a target="_blank" href="https://www.amazon.com/Goldblatt-100-Pack-Utility-Dispenser-10-piece/dp/B08G56P6KN/ref=sr_1_2?crid=MXBBOJB4KCWU&amp;dib=eyJ2IjoiMSJ9.05bdplO00OfMxk1Sx4ROsUnNqZB-JDxiFUnI9N85GT-dKh59udBgb6rnAEp_D3pEFscFl8nd7scftfstLoVxC-rMoyYIB4LZ6Ylyco4fKiV7wU31z0ZSZgiMQyiwxRV-n7aNGBL4RSumFtRzcZj7Mv2c_sZr_G1vdJ1HZ18cCIGYkXKz_mEl6tRnAjnh3mDhTiAjw9pacpmIpggNuz0wsWsgRST4nPrcpwMeoldWaJkwGZuiiMLe1rc0MY89cETdrItdOJAXhukI6BRtpj449m30AtSpeu6gmauf_o229_o.PcyqairQyFP94zWTNFMlzc6-bYQ3FCSP9vAQ0UzYlek&amp;dib_tag=se&amp;keywords=sk5+blade+goldblatt&amp;qid=1711728134&amp;sprefix=sk5+blade+goldblat%2Caps%2C156&amp;sr=8-2" rel="nofollow noopener">https://www.amazon.com/Goldblatt-100-Pack-Utility-Dispenser-10-piece/dp/B08G56P6KN/ref=sr_1_2?crid=MXBBOJB4KCWU&amp;dib=eyJ2IjoiMSJ9.05bdplO00OfMxk1Sx4ROsUnNqZB-JDxiFUnI9N85GT-dKh59udBgb6rnAEp_D3pEFscFl8nd7scftfstLoVxC-rMoyYIB4LZ6Ylyco4fKiV7wU31z0ZSZgiMQyiwxRV-n7aNGBL4RSumFtRzcZj7Mv2c_sZr_G1vdJ1HZ18cCIGYkXKz_mEl6tRnAjnh3mDhTiAjw9pacpmIpggNuz0wsWsgRST4nPrcpwMeoldWaJkwGZuiiMLe1rc0MY89cETdrItdOJAXhukI6BRtpj449m30AtSpeu6gmauf_o229_o.PcyqairQyFP94zWTNFMlzc6-bYQ3FCSP9vAQ0UzYlek&amp;dib_tag=se&amp;keywords=sk5+blade+goldblatt&amp;qid=1711728134&amp;sprefix=sk5+blade+goldblat%2Caps%2C156&amp;sr=8-2</a></td></tr></tbody></table></figure>

Utility Knife F1

Repair

DrDugong

Back with a new display stand for NES (Nintendo Entertainment System) Cartridges! Tired of your NES games not having a proper home? Well not anymore! This cartridge display stand holds up to 10 NES cartridges and can stand vertically, or laid down on its back for horizontal storage. The slots are angled downward at 5° to help prevent the cartridges from slipping out. I tried my best to design the sides of the display to mirror the top of the Gen1 NES (I do realize they should have crossed over to the top, but I didn&#39;t). &nbsp;Multiple options for print profiles: multicolored, dual-colored, and monochrome. Each of which has options for ironing or no ironing. I tried both, and there isn&#39;t too much of a difference between the two. I slowed a lot of the speed and acceleration down to help provide the best quality. Feel free to change the settings to your desire should you not want to wait this long for the print. This print can be completed on its “back” with the opening and letters/words facing upward. Supports ARE NEEDED for this print due to the side inlay designs. You could get away without supports, but it&#39;s only ~20g of filament and it does make a much nicer finish. Using another material for support interface such as PETG makes for easier support removal.&nbsp;Thanks so much and enjoy!

NES Cartridge Display Holder

retro

Officina23

Dyson accessories, when placed in the Wall Mount, sometimes do not fit due to space issues. I had this problem with the motorized brushes, they touched the other short accessories, so I designed this simple extension to move the various brushes apart from each other so that I could mount them all.This is an improved and optimized version of my previous similar model.The button can be printed in different color and the locking system has a print-in-place built in hinge and a durable spring with endstop, to make it return to position after pressing it. This docking system is compatible with V7 and later versions, including Gen5.

Dyson Accessories wall mount 140mm extension

organize

Matthew Ghost

<h2>Organize Your Workspace with Our Under-Desk Cable holder!</h2>Are you tired of the cable chaos under your desk, constantly tangling and getting in the way? Our solution is here! The under-desk cable clamp is the ideal way to keep your workspace clean and organized.&nbsp;Why Choose Our Cable Holder?<ul><li>Effective Organization: Keeps all your cables in one place, preventing them from tangling.</li><li>Easy Installation: Simple to attach under your desk using the screw.</li><li>Universal Design: Suitable for various types of tables and cables.</li><li>Aesthetic Look: Sleek design that doesn’t disrupt the appearance of your workspace.</li></ul>How Does It Work?<ul><li>Place the cables into the holder and secure them to keep them in place.</li><li>Attach the holder under your desk using screw.</li><li>Enjoy a clean and organized workspace without the constant struggle with cables.  </li></ul>

Under-Desk Cable Holder | Clamp

Desk

steinbrecherhuawei

Easy Build Plate Holder for about to 8 Plates I printed in PETG Use power Stripes to mount

Print Plate Wall Mount 8X

Penguin_holic

(In English) A set of hooks and various mounts for 25mm pitch pegboard. The common joint parts can be used to secure them to the board, making for a pegboard system with endless possibilities for development!The main body and joint parts are made as separate parts for easy printing, and the joints are printed flat to increase strength. Storage boxes for output in vase mode are available separately here. Please utilize them together if you like. <a target="_blank" href="https://makerworld.com/en/models/489255" rel="nofollow noopener">https://makerworld.com/en/models/489255</a>&nbsp; Kimwipes holder for 2.5mm pitch pegboard<a target="_blank" href="https://makerworld.com/en/models/483281#profileId-402361" rel="nofollow noopener">https://makerworld.com/en/models/483281#profileId-402361</a> 2024/6/17 UpdatePipe_lack holes expanded by 0.4mm.Add Pipe_lack_op_A_loose,Pipe_lack_op_B_lopse&nbsp; (In Japanease) 25mmピッチのペグボード用のフックといろいろなマウントのセットです。 共通のジョイントパーツでボードに固定できるので無限の発展性を持つペグボードシステムです！本体とジョイント部分を別パーツにしているので印刷しやすいよう、ジョイントは平置きで印刷するので強度を上げるように工夫しています。花瓶モードで出力するストレージボックスは別途こちらで公開しています。 よろしければ一緒に活用してください。 <a target="_blank" href="https://makerworld.com/en/models/489255" rel="nofollow noopener">https://makerworld.com/en/models/489255</a>&nbsp;キムワイプホルダーはこちらです。<a target="_blank" href="https://makerworld.com/en/models/483281#profileId-402361" rel="nofollow noopener">https://makerworld.com/en/models/483281#profileId-402361</a>&nbsp;

Pegboard hook & mount sets

pegboard

Hobbypunk

I created a HSW modplate inspired by Bambu Lab Armor Modplate

Bambu Lab P1P HWS Armor Modplate

desk

Wall Art

Tactical Kaoz

Modeled after our lovely Lil chonky kitty, Lynn ♡

REALISTIC CAT WALL ART REALISTIC CHONKY KITTY WALL DECOR

meow

laisch

This is a scaled flyable micro version of the ASW20 sailplane from Schleicher. The model was created to be lightweight and printable in normal PLA.Because of it's lightweight behaviour it's a little bit fiddly to get it together properly but it's still strong enouth to survive crashes. So please read the Instructions before you build it.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_7930ef971b4078.gif"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_b32700811d73d.gif"></figure>&nbsp;<h3>Printing:</h3>Make sure you align the STL-Files flat with the build plate like in the pictures.&nbsp;The Fuselage and the Nose have to be printed in Vase Mode (0.12mm) for best quality and perfect stability. Make sure you geht your part cooling right otherwise the thin tail section won't print properly because of overheating. Turn Bottom Layers to 1 Layer.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_2xua1hjiurid.jpg"></figure>The Wing parts are printed in normal Mode with 0.12mm Layerheight. Make sure that the first layer prints in 0.2mm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_9yaljcx3l44z.jpg"></figure>After printing carefully remove the wings from your print bed and make sure not to overbend them.&nbsp;<h3>Assembly</h3>Clean up the parts from any print defects<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_mmrpjuqrlmyo.jpg"></figure>&nbsp;Testfit if the wings fit inside the fuselage. The reinforcement part of the wing should touch the fuselage. If not, just cut away the parts wich are too big.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_k461jxekhpvj.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_p3zauy5szoj1.jpg"></figure></td></tr><tr><td>Wing not aligned with fuselage</td><td>Wing aligned with fuselage</td></tr></tbody></table></figure>&nbsp;When the testfit is ok, put some superglue onto the wings and glue them in place.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_v2l13jrwi32n.jpg"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_4dvxkmto8krd.jpg"></figure>&nbsp;Make a testfit if the rudder fits in to the elevator. If not you can take a cutter knife to clean it up a little bit.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_hiskzgmshhkj.jpg"></figure>&nbsp;After that put the rudder and elevator together and secure them with some CA glue. Try to not use too much glue because of extra weight.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_c5669idp5zad.jpg"></figure>&nbsp;Glueing the rudder/elevator assembly to the fuselage is the hardest part of the build. It works the best if you put one small drop onto the fuselage and temporary secure it. After that you can check the alignement and adjust it properly.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_sklgvblwtn24.jpg"></figure>If it looks fine, just secure the whole thing with more superglue.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_58pkfcwdk5pu.jpg"></figure>&nbsp;To make the whole thing fly you have to add weight to the nose and adjust the center of gravity. For me a 4,5mm steelball did the trick. You can temporary secure the nose to the rest of the plane with some tape and check it's flight properties.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_9hxutt2kk35r.jpg"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_ui9nlrtydip2.jpg"></figure>&nbsp;For checking the center of gravity you can balance it on two screws. The COG should be at ⅓ of the wing measured from the front.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_vbnmudk1iyhh.jpg"></figure>if it does'nt fly properly you can also try to give it a little bit of lift by bending the elevator up.&nbsp;If it flys, you now can finally glue the nose to the rest of the sailplane.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_jasr1r5920mo.jpg"></figure>Have Fun!&nbsp;&nbsp;<figure class="table" style="width:92.21%;"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><thead><tr><th colspan="3">If you like this model you may have a look at my other flying toys too</th></tr></thead><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/81500" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-12-03_bc748d83c35e18.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/81500" rel="nofollow noopener">Geared Propeller Launcher</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/76104" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-12-03_eadf473572ad4.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/76104" rel="nofollow noopener">Flying Bat</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/21091" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-12-03_a8fc21a53267c8.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/21091" rel="nofollow noopener">Cross Bow</a></td></tr></tbody></table></figure>

ASW20 Sailplane (micro glider - flyable)

flying

Jakokln

USB A holder for a 1X1 Gridfinity. Holds up to 8 USB drives. Spacing is wide enough to hold most flash drives or adapters. Designed this to replace my old non-gridfinity holder that I have used for many years. &nbsp;Slight taper in the pockets, to help lock in the USB devices when inserted. Slightly oversized for a snug fit, without being too tight. &nbsp;Print with the gridfinity base down. I normally use supports for the magnet holes. Any layer height should work, I use 0.2mm. &nbsp;Need USB C instead? Check this out: <a target="_blank" href="https://makerworld.com/en/models/75455#profileId-79961" rel="nofollow noopener">https://makerworld.com/en/models/75455#profileId-79961</a>Need USB A & USB C? Check this out: <a target="_blank" href="https://makerworld.com/en/models/75457#profileId-79963" rel="nofollow noopener">https://makerworld.com/en/models/75457#profileId-79963</a>

Gridfinity USB-A Holder

gridfinity

muddtt

Watch stand. Small and large size.

Watch Stand

watches

Kevbot.

Watch out! This little guy is very spiky and can bite! 🐊&nbsp;The goal of this design was to make an aesthetically pleasing crocodile clip that was print in place and also functional, which I believe was achieved 😎. The clip is mainly just for amusement but may have some practical applications.&nbsp;This model is for PERSONAL USE ONLY, if you want a commercial license and access to more awesome models you can get it on my patreon <a target="_blank" href="https://www.patreon.com/kevbot_3d" rel="nofollow noopener">https://www.patreon.com/kevbot_3d</a>&nbsp;Like with all my models, I went through many iterations to make sure it was strong, and easy to print without supports.&nbsp;Please feel free to share images of your prints on this page, I would love to see them.&nbsp;Thank you for the support, and I hope you love the Croc! Let me know if you would like to see any other animal clips! Happy Printing!&nbsp;Sincerely,Kevin&nbsp;ALL KevBot. designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent.