Modified it for 0.6mm nozzle printing for a sub 20 mins print (provided you don't lollygag with changing out the filament). Hilarious model - probably +10% BHP at the hot end

Printed super well in basic pla despite having angled overhangs. No issues at all and it looks/works great

Printed really easily on stock settings

Fun and fast print. Now holding my printed bag clips. Thank you

Perfect print. Made some small tweaks to speed but other than that exactly as posted

Printed well in PETG, although I might reprint in PLA so it is less shiny. fits great

Made some small tweaks to the speed, but it otherwise printed great in cheap basic PETG

nice fast print with really clean finish.

Printed super well and easily, only issue was mine for printing the A1 version, not the Mini

Great print! Fits the hot ends perfectly. Printed on some cheap green PLA with no issues whatsoever

Printed great! no issues at all and the thread worked first time without problems

Super lovely print at stock settings, only tweaks I made were to fan speed in the filament settings

absolutely perfect

spot on. great useful print. no issues

printed great, although the nozzle caught a couple of times on one area - but it didn't ruin the print. worked great, and can confirm that it can be printed with the filament included with the printer (under 20g)

excellent quality and speed. printed great even with cheap eSun filament on a standard bambu profile.

best scraper there is. the print was perfect. no issues at all whatsoever

Really fast print, no issues with adhesion, fit the hole perfectly

Perfect print, even with my own PLA profile (lower fan speeds over all, and especially on overhangs for silent operation). No issues at all. Painted up beautifully