icepicknz

Adults

Eternity Labs

These Money vaults will safely store a $5, $10, $20, $50 notes.&nbsp;You need to step on these to break them they are very tough!&nbsp;The idea is to use these for storage and “break in case of emergency” or the other use case is a fun way to give a gift.&nbsp;Roll up a note, very tight, press it through the hole in the back, and it will unroll inside the tube. This roll now contains stored money for later use.&nbsp;Consider giving me a boost if this model was useful!&nbsp;Ways to support me &amp; access to commercial licences:&nbsp;<a href="www.patreon.com/Eternity3D" rel="nofollow">patreon.com/Eternity3D</a> - Free membership available for some .stl access, paid membership needed to resell prints of my designs.&nbsp;One Time Direct support - <a target="_blank" href="https://buymeacoffee.com/eternity3d" rel="nofollow noopener">https://buymeacoffee.com/eternity3d</a>

American Money Vaults - Break in case of emergency

Gimmicks to try

Mark Dra

Hello!This is my Apecar kit card!It's different from others kit cards: all use a “sandwich style” for split objects parts or have a construction likes the laser engraved wood kits….My one is…. FOLDABLE!It,s super funny to build and use just 9 grams of filament!And take less than 40 minutes in single color!!!&nbsp;Enjoy this Italiann Iconi model, well know worldwide!&nbsp;Building tips:<ul><li>start bending a little the doors ( on build plate side there's an engraving)</li><li>bend the main body starting from front side, slighty adjust the angles and close it snapping.</li><li>bend the frame crosspieces, snaptogheter the front wheel parts the bend the handlebar at 80'</li><li>bend 180' the frame and make it adhere to tge back part of the body</li><li>bend the rear box</li><li>play!</li></ul>If you like my works, please give me a 5 star rating and post a pict of your print!&nbsp;bye

Apecar Kit Card - Foldable!

Cool Kids toys

SH Designs

Take professional looking photos of your 3D printed models. This tabletop photo studio light box is seamless, providing an infinite background style without corners or seams. Similar tabletop cycloramas sell for $180 at photography supply stores. Print yours for around $10 in 6 hours!&nbsp;I printed this in Bambu Basic Jade White. For black or darker color backgrounds I recommend using matte filament to prevent reflections or visible printing seams. The background can be sanded and painted for a smooth custom finish of any sheen or effect. I am going to print one with matte black and sprinkle in some stars for an infinite space background! I'll upload the photos when it is complete.&nbsp;All photos were taken with iPhone. For the light source, I used an adjustable desktop LED lamp with color temperature controls. This was perfect as I was able to move the light source easily to where I needed it. There are several affordable options on Amazon and elsewhere. &nbsp;Note: Bedslinger-type printers may need to print a little slower to prevent vibration at the top of the print. Just monitor your model for any movement in the last hour and slow down your printer if necessary to eliminate any vibration artifacts. Since printing, I made the walls 2 layers thicker than my prototype and added a rib to each end of the background to stabilize the walls and prevent vibrations at the corners, and also for added opacity.

Photo Studio Light Box

Photo

Downhill_Solutions

<h2>Here is my Poop Pop Stop V2.1! (is also working on X1C now)</h2><h2>Update: 09.Jan.2024:</h2>- I got enough feedback to say it will now also work on X1C!- the front outer wall are now shorter and thinner, no more Z-Homing error- PTFE Cutting tool with fixing clamp for perfect hose length- Optimized tree-supports <figure class="image image_resized" style="width:63.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-09_72b3fa75e3ea.jpg"></figure>Notice:The Heatbed has play in the X and Y axes, you can see the GIF. If you have to less space between the Poop Pop Stop and the Heatbed, it can help to pull the bed carefully toward the front door to add some space.<figure class="image image_resized" style="width:46.71%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-09_382c00cd274ba.gif"></figure><h2>PTFE Cutting Tool:</h2><figure class="image image_resized" style="width:41.61%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-09_6556d0a830b0b.jpeg"></figure><figure class="image image_resized" style="width:47%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-09_6fdda886fc02.jpeg"></figure><figure class="image image_resized" style="width:41.35%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-09_bf1bfb070340b.jpeg"></figure><figure class="image image_resized" style="width:45.41%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-09_7bbc6f3b0570c.jpeg"></figure><h3>For the perfect fit and quality like mine, do only use my uploaded printing-profile and ABS filament!</h3> The Problem at my prints was, that the Poop was pulled out of the <a target="_blank" href="https://eu.store.bambulab.com/de/collections/accessories-for-p1-series/products/purge-chute" rel="nofollow noopener">Purge Chute</a> at every filament change:<figure class="image image_resized" style="width:611.234px;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2023-12-21_a9b5c2be80bca.jpeg"></figure> The Solution is my Poop Pop Stop, it lets the nozzle change the filament without problems, and hold the filament waste back in the purge chute:<figure class="image image_resized" style="width:53%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-07_62ff672b725c2.jpg"></figure><h2>The new Version V2.0 is a complete new design of the <a target="_blank" href="https://makerworld.com/de/models/102462#profileId-109116" rel="nofollow noopener">old Version</a> and contins the following changes:</h2>- the bottom layer and the print position are complete new designed without the level change for better print and look.- the poop stop area is now designed with PTFE hoses (you need them seperatly - i used the bambulab spare tubes) against sticking with print filament on the Poop Pop Stop itself.- the poop stop area use now a U-Cut instead of the V-Cut version- the thin front bridge is now stabilized with a vertical wall on the outside of the purge chute.- i added some cutouts in the washing area for the nozzle- the hole at the washing area for the nozzle is now bigger&nbsp;&nbsp;<h2>I tested the new design with a few printing-cubes with arround 50 filament changes and out of different materials (PLA / PETG / ABS), there was no problems on every material at my P1S:</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-07_f764cad86e401.gif"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-07_7542cf135e9a1.jpeg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-07_139fc6ebcdd46.jpeg"></figure><h2>IMPORTANT: This new Version needs some difficult work-steps:</h2>- remove the Support carefully with a knife untill you got a clean surface in this areas- slit the PTFE-hoses lengthwise (only no.2/3/4) , don't slit no.1!- press the tubes in the numbered order on the single part (no.2 you have to press it from the bottom side and turn it carefully onto the round bridge)-after the install of the hoses no.2-no.4, cut it off just to the surface of the component-Cut a radius on the end of the pipe no.1 as shown in the picture (make shure you got a Gap between the hoses arround 1-2mm, if not recut no.1 until the gap is big enough or bend it a little bit) Please do all the steps carfully and check your result for looking the same as my Poop Stop in the pictures!<figure class="image image_resized" style="width:51.96%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-07_241a0ab6f3704.jpeg"></figure><figure class="image image_resized" style="width:51.97%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-09_86dc94b441b87.jpeg"></figure><figure class="image image_resized" style="width:51.36%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-09_a9ab89056c62b.jpeg"></figure><figure class="image image_resized" style="width:51.46%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-07_484e5a68d15d7.jpeg"></figure><figure class="image image_resized" style="width:51.35%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-07_510df216c2b21.jpeg"></figure>&nbsp;<h2>Please give me feedback! :)</h2>

Poop Pop Stop V2.1 - for P1S / P1P / X1C (UPGRADE 09.01.2024)

maybe try

gwenhidwy

These are stackable trays that you can connect together to make one large tray.You can mix and match different combinations of trays to suit your needs.&nbsp;The holes are keyed so that they will only fit together in the correct orientation.&nbsp;I tried making the same types of modules as my <a target="_blank" href="https://makerworld.com/en/models/132441#profileId-143577" rel="nofollow noopener">Bento Stax 2.0</a> but they did not really work, due to the cut out.&nbsp;They would work with a 4x4 grid, however. Let me know if that is something you are interested in.&nbsp;I have the following sizes (tray dimensions) in separate profiles<ul><li>200mmx200mm</li><li>180mmx180mm</li><li>140mmx140mm (mini)</li></ul>The idea for these came from a user suggestion, so please let me know if you would like any changes.&nbsp;Please checkout some of my related models:<figure class="table"><table><tbody><tr><td><h2><a target="_blank" href="https://makerworld.com/en/models/132441#profileId-143577" rel="nofollow noopener">Bento Stax 2.0</a></h2></td><td><h2><a target="_blank" href="https://makerworld.com/en/models/122893#profileId-132376" rel="nofollow noopener">Bento Stax</a></h2></td><td><h2><a target="_blank" href="https://makerworld.com/en/models/16549#profileId-15418" rel="nofollow noopener">Nesting Trays</a></h2></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/406424/2024-01-14_f3e45a438b523.jpeg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/406424/2024-01-14_c5cb924e55fcc8.jpeg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/406424/2024-01-14_52df13f23d80f.jpeg"></figure></td></tr></tbody></table></figure>

Bento Connex

camping

ArgiCZ

monitor stand - honeycomb design

stands

PhaseworksCA

This 3D print file captures the awe-inspiring moment of a space shuttle breaking through billowing clouds, ascending into the boundless expanse of space. This fun 3D print file allows you to bring this epic space exploration scene to life in your own home or office.&nbsp;<figure class="image image_resized" style="width:100%;"><a href="https://www.printables.com/@PhaseworksCA/store" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/599356/2024-02-27_cbac20a9d0926.png"></a><figcaption> </figcaption></figure>

The Line Art Space Shuttle - To The Stars!

summer

schwatoo

A selection of gridfinity bit organizers with and without labels.

Gridfinity Bit Organizers

must print

FlorinV

Please share your make and let me know your opinion about this model. Thank you and have a great week !&nbsp;Update 11.03.2024: Added “Skull" lid. There is an optional profile for printing this lid. <a target="_blank" href="https://makerworld.com/en/@timon1201" rel="nofollow noopener">@timon1201</a> did a similar lid and gave me this idea. thanks !&nbsp;Update 29.12.2023: Added “Pine cone” lid. You can find it in the Optional Lids profile. The lid has fine details, please be sure your printing plate is clean (no finger grease etc.).&nbsp;The Automatic Toothpick dispenser:<ul><li>All parts are 3d printed, all in one plate. No AMS needed.</li><li>Several Lids to choose from and a clean lid to customize it as you wish. “Voronoi” and “Yoda” lid are found in the model profile. Other optional lids will be added to the “Optional Lids” profile.</li><li>Each part easily fit together. Please check the short building video bellow. ( 1min 30sec minutes to build )</li><li>works with toothpicks of max 66mm and approx. 2mm diameter (normal toothpicks I've found ). Please shake the dispenser to arrange the toothpicks correctly and parallel. Throw away toothpicks that look too different than normal ones: damaged, askew.</li><li>The two arms that hold the big parts together have printed on them L and R, to be sure you set them correctly (left and right).</li><li>The 3d printed spring should be inserted like in the video, first on the back with the other end up, then the front.</li></ul><figure class="image image_resized" style="width:30.4%;"><img src="https://makerworld.bblmw.com/makerworld/draft/682841/2023-12-14_9977d673e0c9a.png"></figure><ul><li>Second spring is optional (the left one). After some use, it will work smoother, as the parts needs some time to slide easier one on each other. From my experience, the right spring is enough, but feel free to play around.</li><li>If some of the toothpicks are thrown, it means some of them are a bit too thin. You can dispense them better by releasing the push pad slower. :)</li><li>If at some moment it stops from giving toothpicks, it can happen that the feeding zone is blocked by two toothpicks (usually because some toothpicks are smaller/bigger, damaged, askew etc). It's easily fixed by shaking a bit the whole model and/or press harder on the push part.</li><li>The parts are finely designed to work together, so I suppose it's important to have a good filament and calibrated. Please use my tested profile.</li><li>You can choose from two different lids (in the main profile, more lids in a separate profile - Optional Lids). The “Yoda” lid is a separate plate as it's using AMS and 2 colors.  You can print it without AMS and leave empty space in the lid where letters and Yoda is (don't print the letters and Yoda).</li><li>I've added another profile (For Thinner Toothpick - only base part) containing only the base part for cases where your toothpicks are often flying out of the dispenser. This is usually a problem related too thin toothpicks. This part is only the base part which should handle such toothpicks.</li><li>Based on the review of eric.joschko (thank you!!), he scaled everything to 108% and everything works perfect for he's toothpicks which i understood they are 68mm length.</li><li>Based on review of Sven_fretz (thank you!!): “scaled everything up to 125% and it works fine with my 80mm toothpicks.”</li><li>For better spring action and to be sure they keep their power better in time, you can print only the springs with PETG.</li></ul>This is the building video (1min 30sec minutes ): <a target="_blank" href="https://youtu.be/BJucPYljE2o" rel="nofollow noopener">https://youtu.be/BJucPYljE2o</a><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=BJucPYljE2o"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/BJucPYljE2o" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;If you like this model, please check out my new Salt & Pepper dispensers: <a target="_blank" href="https://makerworld.com/en/models/228050#profileId-245632" rel="nofollow noopener">https://makerworld.com/en/models/228050#profileId-245632</a><figure class="image image_resized" style="width:56.68%;"><img src="https://makerworld.bblmw.com/makerworld/draft/682841/2024-03-06_0e2805d6f36fc.jpg"></figure>&nbsp;Or, my fun and easy to print, easy to use filament cutter: <a target="_blank" href="https://makerworld.com/en/models/137257#profileId-149353" rel="nofollow noopener">https://makerworld.com/en/models/137257#profileId-149353</a><figure class="image"><a href="https://makerworld.com/en/models/137257#profileId-149353" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/682841/2024-01-15_0a30aa152023c.png"></a></figure>&nbsp;Disclaimer: YOU ACKNOWLEDGE, BY YOUR USE OF MY MODELS, THAT YOUR USE OF THE MODELS IS AT YOUR SOLE RISK.<h2>LIMITATION OF LIABILITY</h2>UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL OR EQUITABLE THEORY, SHALL THE DESIGNER OF THE MODELS BE LIABLE TO YOU OR TO ANY OTHER PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL LOSSES OR DAMAGES OF ANY NATURE ARISING OUT OF OR IN CONNECTION WITH THE USE OF OR INABILITY TO USE THE MODELS OR 3D PRINTED MODELS.

Toothpick Dispenser - all parts printed

kitchen

EngGraph

&nbsp;&nbsp;Elegant Wine Bottle Holder for Your Kitchen Counter&nbsp;This wine bottle holder is the perfect addition to your kitchen, providing a stylish way to keep your wine bottles easily accessible and organized on the table.&nbsp;Space-Saving: The compact wine bottle holder takes up minimal space on your kitchen counter while offering a tidy storage solution for your wine bottles.&nbsp;Aesthetic Design: With its timeless and elegant design, the wine bottle holder seamlessly fits into any kitchen decor, adding a touch of sophistication to your space.&nbsp;Secure Storage: The horizontal supports ensure that your wine bottles stand securely and stably, without wobbling or tipping over.&nbsp;This wine bottle holder is not only functional but also an attractive centerpiece. It offers a stylish way to have your favorite wines within reach when you&#39;re ready to enjoy them.&nbsp;Print your wine bottle holder today and add an elegant touch of organization to your kitchen counter!&nbsp;<h2>Thank you, friends! It&#39;s impressive to observe your creativity and see how you apply your design and talent. For those who still want to print the model, I&#39;ve summarized the great results you&#39;ve shared in the comments here. I hope that others will be inspired by your designs, color choices, and material selection.</h2>&nbsp;<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/812382/2024-01-07_711ef05a57cf1.jpg"><figcaption>Print and Design by <a target="_blank" href="https://makerworld.com/de/u/1886292574" rel="nofollow noopener">@katharina.struc</a></figcaption></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/812382/2024-01-07_fabc11917d346.jpg"><figcaption>Print and Design by <a target="_blank" href="https://makerworld.com/de/u/3128602605" rel="nofollow noopener">@cbougerie</a></figcaption></figure></td><td><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/812382/2023-12-19_f0b7a909f08b3.jpg"><figcaption>Print and Design by <a target="_blank" href="https://makerworld.com/de/u/1723791022" rel="nofollow noopener">@Ccb045</a></figcaption></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/812382/a4b6eb00-9c72-11ee-ae21-a32aac2dff22.jpg"><figcaption>Print and Design by <a target="_blank" href="https://makerworld.com/de/u/3007439339" rel="nofollow noopener">@GHOSTELEVEN</a></figcaption></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/812382/aac9d440-ad65-11ee-a91c-897eff7dbe9d.jpg"><figcaption>Print and Design by <a target="_blank" href="https://makerworld.com/de/u/1143904387" rel="nofollow noopener">@Ratler</a></figcaption></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/812382/0840f770-a5f5-11ee-9f6e-970eec074b76.jpg"><figcaption>Print and Design by <a target="_blank" href="https://makerworld.com/de/u/1811672732" rel="nofollow noopener">@tturns27</a></figcaption></figure></td></tr><tr><td colspan="3"><figure class="image image_resized" style="width:96.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/812382/95696cb0-a44f-11ee-b86e-cfdb05226b64.jpg"><figcaption>Print and Design by <a target="_blank" href="https://makerworld.com/de/u/4173901069" rel="nofollow noopener">@engintakmork</a></figcaption></figure></td></tr></tbody></table></figure><figure class="table" style="width:91.83%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/812382/2024-01-09_82ca684fc8585.jpg"><figcaption>Print and Design by <a target="_blank" href="https://makerworld.com/de/u/2953964505" rel="nofollow noopener">@adzamper7117</a></figcaption></figure></td><td><figure class="image image_resized" style="width:74.18%;"><img src="https://makerworld.bblmw.com/makerworld/draft/812382/2024-01-09_6600514d25d25.jpg"><figcaption>Print and Design by <a target="_blank" href="https://makerworld.com/de/u/1837491328" rel="nofollow noopener">@EngGraph</a></figcaption></figure></td></tr></tbody></table></figure><figure class="table" style="width:95.77%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/812382/2024-01-10_2a49647d4fde4.webp"><figcaption>Print and Design by <a target="_blank" href="https://makerworld.com/de/u/2827972142" rel="nofollow noopener">@Skovgaard</a></figcaption></figure></td><td><figure class="image image_resized" style="width:86.21%;"><img src="https://makerworld.bblmw.com/makerworld/draft/812382/2024-01-10_93d6c2a831c3.jpg"><figcaption>Print and Design by <a target="_blank" href="https://makerworld.com/de/u/4228581023" rel="nofollow noopener">@jacob.simmons52</a></figcaption></figure></td></tr></tbody></table></figure><figure class="image image_resized" style="width:97.2%;"><img src="https://makerworld.bblmw.com/makerworld/draft/812382/f2611a50-b0a0-11ee-a59a-ad068eadc082.jpg"><figcaption>Print &amp; Design by <a target="_blank" href="https://makerworld.com/en/u/2873677700" rel="nofollow noopener">@AndyF_CH</a></figcaption></figure>&nbsp;<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/812382/2024-01-12_9151a7b941c7f.jpg"><figcaption>Print &amp; Design by <a target="_blank" href="https://makerworld.com/en/u/746945106" rel="nofollow noopener">@surpriselady320</a></figcaption></figure></td><td> </td></tr></tbody></table></figure>

Wine Bottle Holder

home decor

Daniel Schenk

<div><h1>Summary</h1><div>Simple Gridfinity 5x5 box 6u heightUpdate: V2Base and V2Lid with more clearance around the alignment features and improved locking mechanismHardware: 8x M3x6 set screw to fasten the hinges to the box 2x M3 Nyloc Nut for the hinges 2x M3x35 Socket Head Screw DIN912 for the hinges 2x M3x5 Socket Head Screw DIN912 to hold the sliders on the railsPrinting: -"block" and the two hinge parts need to be printed twice -printing orientation see picturesInspired by: <a href="https://www.printables.com/model/543553-gridfinity-storage-box-by-pred-now-parametric" rel="nofollow">https://www.printables.com/model/543553-gridfinity-storage-box-by-pred-now-parametric</a>Gridfinity by Zack Freedman: <a href="https://www.youtube.com/watch?v=ra_9zU-mnl8" rel="nofollow">https://www.youtube.com/watch?v=ra_9zU-mnl8</a><h1>gridfinity</h1></div></div>

Gridfinity 5x5x6 box stackable with sliding lock

Zurlingo-3D

A cute articulated Dolphin fidget toy.&nbsp;Print in place with no support needed.&nbsp;Included print profile has painted eyes, mouth and blow hole.&nbsp;Thanks for looking! - Please post your makes :)&nbsp;Please check out my other articulated models on my profile :P&nbsp;Here's a Shark to go with the Dolphin :D<a target="_blank" href="https://makerworld.com/en/models/99846#profileId-106450" rel="nofollow noopener">https://makerworld.com/en/models/99846#profileId-106450</a>

Articulated Dolphin Fidget Toy

Isla

apt-get.fun

Hi ! This is a DJ Remix on the original from NinjaDuck prints:<a target="_blank" href="https://makerworld.com/en/u/2630895803" rel="nofollow noopener">https://makerworld.com/en/u/2630895803</a>So all credits where they are deserved and check out his page! :)&nbsp;I wanted a more of a tactile feel so added 2 extra lines ontop with differing height.They also decrease the flex in this model slightly &nbsp;As with my print profile on the original, my settings are for quality and durability and the speed of the print comes second&nbsp;Hope you enjoy and will leave you with this James May quote "Oh, C*ck..."

Fidget Gears! Remixed for more tactile feel, less flex. Print in Place. 

fidget

rostap

<h5>News</h5><ul><li>March 20, 2022 added bigger hook</li><li>March 21, 2022 added USB flash drive holder</li><li>March 21, 2022 added hooks (12mm and 25mm, screwed with M3 screw)</li><li>March 21, 2022 added box (screwed with M4x10 screw)</li><li>March 21, 2022 added 2 wall parts (224x190 and 293x271)</li><li>March 22, 2022 added SD card holder(screwed with M4x10 screw)</li><li>March 22, 2022 added USB flash drive holder (screw in no need)</li><li>March 22, 2022 added box (screw in no need)</li><li>March 24, 2022 added micro SD card holder (for 5 or 20 pieces)</li><li>March 24, 2022 added micro SD card holder (for 5 or 20 pieces)</li><li>April 4, 2022 added shelves (4 dimensions)</li><li>April 6, 2022 Added drawers (found as a <a href="https://www.printables.com/en/model/163008-honeycomb-box-for-honeycomb-wall" rel="nofollow">remix</a>)</li><li>April 12, 2022 Added wrench hooks (2x)</li><li>May 6, 2023 Added more step files</li><li>July 18, 2023 Fixed some stl and step wall files. Added image-diagram how to install your honeycomb</li></ul>Don't forget to look at other <a href="https://www.printables.com/cs/model/152592-honeycomb-storage-wall/remixes" rel="nofollow">remixes</a> - there are a lot of interesting modifications and accessories<a href="https://www.reddit.com/r/honeycombwall/" rel="nofollow">https://www.reddit.com/r/honeycombwall/</a><h3>Honeycomb wall</h3>The basic part of the wall is printable on the Prusa Mini printer. It is necessary to turn off the skirt or set the distance to 1mm in order for the part to fit it on the pad. You can connect the basic parts of the wall together. You can connect it also with printable parts which can be used in various ways (you can use it for screwing to the wall, you can use it as a holder for hanger or as a holder for hook). <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_tisgszo2nt8g.png"></figure>Choose the correct part size for your printer, or use <a href="https://www.printables.com/cs/model/530149-customizable-honeycomb-storage-wall-openscad-v21-b" rel="nofollow">https://www.printables.com/cs/model/530149-customizable-honeycomb-storage-wall-openscad-v21-b</a> for a custom size.<h5><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_frme5d4gs7i6.jpg"></h5><h5> </h5><h5>Diagram to show how to install your honeycomb.</h5><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_yrccc5kolg4d.png"></figure><h5> </h5><h5>Printing settings</h5><ul><li>layer height: 0.25 - 0.3</li><li>perimeters: 3 (or more - without infill for faster printing) </li></ul><h3>Parts for attaching honeycombs to the wall</h3>Some of the parts (which are orange on the picture) you can use for hanging to the wall or for connecting the basic parts together. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_be43o1ws3a92.png"></figure><figure class="table"><table><tbody><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_ajojx36s1wlm.jpg"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_2nxibc3el5li.jpg"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_fqxf6bjpuxz4.jpg"></figure></td></tr></tbody></table></figure>&nbsp;<h3>Fasteners and parts for attaching hooks and objects</h3>There is added one part with the nut (size M3, M4, M5) inside which can be used for screwing whatever holders you want. <figure class="table"><table><tbody><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_1rsdiotho5yk.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_ro3vw4oameqz.png"></figure></td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_oot6uv6g50m7.png"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_hjjkudqq3rfc.jpg"></figure></td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_5rje9cxan9um.jpg"></figure></td><td> </td></tr></tbody></table></figure>&nbsp;<h3>Hooks and holders</h3>This is space for new holders and hooks which will be added as needed. Hook bottom and side is prepared to insert to the empty insert part. <figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_lcf73emxp801.png"></figure></td><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_rtv2d4cr55ea.png"></figure></td></tr><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_5nhoo4s4wc6p.png"></figure></td><td> </td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_fcnuojpuy9qg.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_ochq2a4i6fyp.jpg"></figure></td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_nquxdyj69cru.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_e3jw2h6pd0mm.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_avw6edcfzzjq.jpg"></figure></td><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_hdrj456s7o1j.jpg"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_wsokal0vy58z.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_en42os2oqu0j.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_tqjhj78mu78r.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_sctwl7slauf5.jpg"></figure></td><td> </td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_6bz02n1vimho.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_qxwzvybnot3t.jpg"></figure>&nbsp;</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_pa8c7le03qfq.jpg"></figure></td><td> </td></tr></tbody></table></figure>&nbsp;<h3>Other parts</h3>This is cover for the connecting part which is used for hiding the screwer.<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_qmmoju4hk27r.jpg"></figure>And also you can use the second part (as shown in the picture) which can be used for additional attaching the honey comb to the wall. <figure class="table"><table><tbody><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_hnjcfsheftbq.png"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_sc318q6f89ef.jpg"></figure></td></tr></tbody></table></figure><h5> </h5><h5>My printing settings for all inserts </h5><ul><li>layer height: 0.2</li><li>perimeters: 4</li><li>infil: 20%</li></ul><h4> </h4>

Honeycomb storage wall

storage

Benjamin Kott

<h3>Organizer Box (Fully Parameterized) with Fusion 360 Source Files.</h3>Use the available print profiles if you want to have a specific size, if you are more into tinkering fetch the Fusion 360 file and enjoy all the customizable parameters. The model is designed so that all punch holes are auto-calculated and evenly spaced. No need to fiddle around with manual settings, just define the basic parameters and watch the magic math 😊. Punchhole rows are auto-calculated and will center on the outer wall.&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/_2nHOIhereM"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/_2nHOIhereM" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h3>Customizable Parameters:</h3><ul><li>Height</li><li>Width</li><li>Length</li><li>Wall thickness</li><li>Punchhole Diameter</li><li>Punchhole Spacing</li><li>Corner Radius</li><li>Save space on the top and bottom</li></ul><h3>Customizing Tips:</h3><ol><li>If you adjust the width and length, it can be helpful to adjust the corner radius before making changes.</li><li>If you adjust the corner radius, ensure that the desired size fits your desired width and length.</li><li>If you want to create a round object. please ensure the width and length are matching. Configure the corner radius to ½ - 0.01 of the width or the length. Example: You have a width of 80, set the corner radius to 39.99.</li></ol><h3>Why another box model?</h3>There are a lot of box models already available, but all I found were static,or have features or design aspects that did not fit my needs.&nbsp;I need a model flexible, that can easily adapt to any size I need - and also would be approved by my wife.Maybe I also wanted to play around with repeating auto-calculating patterns in Fusion 360, okay okay - you got me.&nbsp;I hope you enjoy the design, please leave a comment/rating if you enjoy it or share your feedback!&nbsp;<h3>Updates:</h3><ul><li>20.02.2024<ul><li>Added 20x10x6cm <a target="_blank" href="https://makerworld.com/en/models/103266#profileId-214791" rel="nofollow noopener">https://makerworld.com/en/models/103266#profileId-214791</a></li><li>Added 10x10x6cm <a target="_blank" href="https://makerworld.com/en/models/103266#profileId-214795" rel="nofollow noopener">https://makerworld.com/en/models/103266#profileId-214795</a></li><li>Added 15x10x6cm <a target="_blank" href="https://makerworld.com/en/models/103266#profileId-214801" rel="nofollow noopener">https://makerworld.com/en/models/103266#profileId-214801</a></li></ul></li><li>01.01.2024<ul><li>Added 2 new cylindric versions<ul><li>10x10x13cm <a target="_blank" href="https://makerworld.com/de/models/103266#profileId-126695" rel="nofollow noopener">https://makerworld.com/de/models/103266#profileId-126695</a></li><li>8x8x10cm <a target="_blank" href="https://makerworld.com/de/models/103266#profileId-126713" rel="nofollow noopener">https://makerworld.com/de/models/103266#profileId-126713</a></li></ul></li><li>Changed extrusion for the holes in the Fusion 360 model</li></ul></li><li>24.12.2023<ul><li>Fixed baseplate calculation in the Fusion 360 model</li></ul></li></ul><h3>More Fusion 360 Parameterized Models</h3><ul><li>Stackable Storage Bin <a target="_blank" href="https://makerworld.com/en/models/114250" rel="nofollow noopener">https://makerworld.com/en/models/114250</a></li><li>Organizer Box Diamond Edition <a target="_blank" href="https://makerworld.com/en/models/147775" rel="nofollow noopener">https://makerworld.com/en/models/147775</a></li><li>Modern Vase 1 <a target="_blank" href="https://makerworld.com/en/models/108166" rel="nofollow noopener">https://makerworld.com/en/models/108166</a></li><li>Under Desk Drawer <a target="_blank" href="https://makerworld.com/en/models/145324" rel="nofollow noopener">https://makerworld.com/en/models/145324</a></li></ul>&nbsp;&nbsp;<figure class="table"><table><tbody><tr><td style="width:50%;"><figure class="image"><a href="https://makerworld.com/en/models/114250" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/759128/2024-03-23_519e073d57512.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/114250" rel="nofollow noopener">Stackable Storage Boxes</a></td><td style="width:50%;"><figure class="image"><a href="https://makerworld.com/en/models/147775" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/759128/2024-03-23_fb6186fdc76a4.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/147775" rel="nofollow noopener">Boxes Diamond Edition</a></td></tr><tr><td style="width:50%;"><figure class="image"><a href="https://makerworld.com/en/models/392542" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/759128/2024-03-24_bbcd7d56b5ac1.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/392542" rel="nofollow noopener">Stackable Boxes</a></td><td style="width:50%;"> </td></tr></tbody></table></figure>

Organizer Box / Boxes

containers

maegu_

Hummingbird Silhouette Wall Art&nbsp;The Flower to this can be downloaded here : <a target="_blank" href="https://makerworld.com/de/models/99403#profileId-105975" rel="nofollow noopener">https://makerworld.com/de/models/99403#profileId-105975</a>&nbsp;

Wall Art - Hummingbird Silhouette

Sevro

OverviewSet of photo props for party.&nbsp;InstructionYou can hold items in hand, use skewer stick, or print dedicated stick. However skewer stick 2,5 mm thickness is recommended.You can also use an elastic band and put some props on your head.Each item is colorized from bottom so you can get additional effect from textured plate. In given print profile use color as you want.&nbsp;Have fun&nbsp;&nbsp;

Party Photo Props Set

party

ShakaStudio

Textured Faces Series :Stoned : <a target="_blank" href="https://makerworld.com/en/models/45876#profileId-47671" rel="nofollow noopener">https://makerworld.com/en/models/45876#profileId-47671</a>Sliced : <a target="_blank" href="https://makerworld.com/en/models/93257#profileId-99667" rel="nofollow noopener">https://makerworld.com/en/models/93257#profileId-99667</a>Stoned Again : <a target="_blank" href="https://makerworld.com/en/models/116838#profileId-125606" rel="nofollow noopener">https://makerworld.com/en/models/116838#profileId-125606</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/346291/2024-01-02_a32aada044af5.jpg"></figure>&nbsp;This model has been carefully designed to look great with 3 colors or 4 colors. Only filament swaps! No AMS necessary.&nbsp;This does not need an AMS to print, but it does make it easier.If you have an AMS, print directly from the provided print profile.If you don't have an AMS, open and slice in the Bambu Studio app and add pauses at the provided layer heights for filament swaps.&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm&nbsp;3 Colors :Start with Black At layer #9 (0.88mm) swap to Grey At layer #20 (1.76mm) swap to White for the rest.&nbsp;&nbsp;4 Colors :Start with Black At layer #9 (0.88mm) swap to Grey At layer #15 (1.36mm) swap to Tough Cream/ Vanilla Cream At layer #20 (1.76mm) swap to White for the rest.&nbsp;