iam_8675309

7919alex

I am still new to Fusion360 design and have found it fun. I have attached the STEP file. I would be happy about reviews.&nbsp;Ich bin noch neu im Fusion360 Design und habe Spaß an der Sache gefunden. STEP Datei habe ich mit angehängt. Über Bewertungen würde ich mich freuen

Family LED Lamp

MottN.

These fit 3/8&#34; drive metric Impact socket sets. These will hopefully work for you if you have a set that matches one of the combinations below. Note that normal sockets and impact sockets have different dimensions; if you are looking for normal sockets I have a separate model posted for those.<ul><li>10pc: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19</li><li>11pc: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19</li><li>12pc: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19</li><li>13pc set 1: 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19</li><li>13pc set 2: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21</li><li>14p: 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21</li></ul>In the print profile pick the set or sets you want to print and whether you want the left or right hand labeled version. Color change is at layer 91 with the standard 0.28mm extra draft profile, or use the profile I uploaded.&nbsp;Check the hole sizes by either by measuring hole sizes or move the blocks partway through the build plate (so the first layer has the holes in it) and print just a couple layers.&nbsp;If these don&#39;t work for you you can make something similarly sized for your specific sets with the parametric files <a target="_blank" href="https://makerworld.com/en/models/477335#profileId-388377" rel="nofollow noopener">here</a>&nbsp;The bottom is 21mm gridfinty squares which are compatible with the standard 42mm grid.

(6 variations) 3/8"dr Impact Metric Socket holders

gridfinity

DraconPern

Gridfinity organizer for button batteries, 6U. Holds CR20xx, CR16xx, CR12xx, LR/SR44, LR/SR41. Built-in slot for a pick. FYI, CR12xx slot and SR44 slot are very similar in size but they are different. Please stack the battery same pole touching each other to avoid shorts. Only magnet hole and no screw hole on this model.

Gridfinity Button Battery Holder

magnets

uhltimate

Endless 3D-Printed Calendar - Day & Weekday Display&nbsp;Update 09.01.2025 - Added Some Languages&nbsp;Description:Introducing the Rotating Endless Calendar - a 3D-printable marvel that combines both form and function in a timeless design. Say goodbye to flipping through pages of traditional calendars, for this innovative creation allows you to effortlessly keep track of the day and weekday with a simple twist.&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/Ta8FyG5fRpI"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Ta8FyG5fRpI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Here is an image illustrating the assembly process. The Holder, which is the final component, serves not only as a stand but also secures everything in position. Two of these are required. The design is sleek and does not require screws. Additionally, you will need a 1.75mm filament piece that is 20-25mm long.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/402151/2023-12-30_8f1e8a2cab8938.png"></figure>

Rotating Endless Calendar - Never Miss a Day

household

bernhard.haba

You need a 1mm wire for the joint.Print with Support (im using tree support).Best with 0,1 layerhight

Cigar Stand v2

cigar

JS DESIGN

Part of my DJI mini 3 / 4 Accessory uploads,This is a protective skin for the multiple batteries charger. It includes cut-out for charging lights as well as for the charging ports. The power button is also identified and working thru the skin.&nbsp;THIS IS INTENDED TO BE PRINTED IN TPU&nbsp;See my other DJI accessories here:<a target="_blank" href="https://makerworld.com/en/@JSDESING" rel="nofollow noopener">JS DESIGN | Published - MakerWorld</a>&nbsp;

DJI Mini 3 / 4, Battery Charger protective skin 

Officina23

In a Sunlu filament spools I found a clip: it works quite well, so I redrawed it to be able to print some more. Depending on the adhesion, a brim may be required.&nbsp;If you often put your spools in vacuum bags, the raised back of the clip could sometimes damage them: in this case print version 2 with the back flattened (view print profiles). For Bambu Lab spools I advise you against using this clip, because it would be too narrow: it&#39;s better to print <a target="_blank" href="https://makerworld.com/it/models/48350#profileId-50202" rel="nofollow noopener">this specific version</a> adapted for the larger thickness.&nbsp;Warning:  before before downloading and printing SPAM profiles (uploaded everywhere always by the same users), check that when ★ 𝐅𝐚𝐬𝐭 is written it is really faster and not 30% slower at printing. Make sure also it was actually printed and that the photo used is not a copy of the print from the original profile, a rendering or a simple screenshot!

Spool filament clip Basic for Sunlu Spools

clips

Wccc111

<figure class="image image_resized" style="width: 27.13%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479311/design/2024-05-30_b37c7ca556f35.png"><figcaption>内径35毫米 完美匹配纺车轮 水滴轮也可以插但是插不到底</figcaption></figure><figure class="image image_resized" style="width: 25.7%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479311/design/2024-05-30_0334772cdd129.png"><figcaption>可穿50毫米带</figcaption></figure><figure class="image image_resized" style="width: 25.13%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479311/design/2024-05-30_94f5bc424e6bf.png"><figcaption>可夹3毫米</figcaption></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479311/design/2024-05-30_2dcb233076a58.jpg"></figure>

通用路亚鱼竿插座可夹可穿带

fishing

binovecradim12

Just insert this (diameter 1€) in shoping cart, toggle right or left while removing.

Cart Coin (removable)

flipping&stuff

edc tactical knuckles i made NEEDS TO BE SCALED DOWN (depending on ur finger size) they can be used as a keychain,self defense and other stuffv1 is thicker v2 is thinner

EDC tactical knuckles(scale down to fit ur finger)

survival

JamesThePrinter

A small, strong case with a collection of optional inserts for different uses.&nbsp;<h3>Case</h3>Use a section of 1.75mm filament inside the hinge to connect the lid to the base. Depending on your printer/setup, this hole maybe be on the tight side or a bit loose. If tight, drilling out the hole may help. If it is slightly oversized, I suggest melting the end of the filament piece with a soldering iron or lighter.This can be a standalone case or you can add inserts for more functionality. &nbsp;&nbsp;Print SettingsBase and Lid can be printed with 3 perimeters and 0% infill. Using these settings, most walls will be solid. &nbsp;<h3>Optional Inserts</h3><ul><li>Battery Holders <ul><li>AA Holder - fits up to 6 AA batteries</li><li>AAA Holder - holds up to 8 AAA batteries</li><li>9V Holder - fits up to 2 9V batteries</li></ul></li><li>Digital Storage Holders - Can be used together or separately<ul><li>MicroSD Card Holder - fits up to 12 MicroSD cards in the lower section</li><li>SD Card Holder - fits up to 6 SD cards in the upper section</li></ul></li><li>Dividers<ul><li>Full Divider - Splits the entire case into 2 compartments</li><li>Upper Divider - adds 2 compartments on top - Can be used with the Lower Divider</li><li>Lower Divider - adds 2 compartments on bottom - Can be used with the Upper Divider</li></ul></li><li>Nozzle Holders - Can be used together or separately <ul><li>Upper Nozzle Holder - fits 14 standard nozzles (MK8 or E3D V6)</li><li>Lower Nozzle Holder - fits 14 standard nozzles (MK8 or E3D V6)</li></ul></li></ul>Print SettingsNo special print settings are needed for any of the inserts. I used 3 perimeters and 10% infill. &nbsp;&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:Black Case<ul><li>polymaker PolyTerra Charcoal PLA</li><li>Hatchbox Sparkle Gray PLA</li></ul>Red Case<ul><li>polymaker PolyTerra Army Red PLA</li><li>polymaker PolyTerra Lava Red PLA</li></ul>Yellow Case<ul><li>PrintBed Yellow PLA</li><li>polymaker PolyTerra Banana PLA</li></ul>Teal Case<ul><li>polymaker PolyTerra Arctic Teal PLA</li><li>PrintBed Baja Blue PLA</li></ul>Purple Case<ul><li>Prusament Galaxy Purple PLA</li><li>Fillamentum Lilac PLA</li></ul>Orange Case<ul><li>CC3D Flame Orange PLA+</li><li>Inland Orange PLA</li></ul>Green Case<ul><li>PrintBed Green PLA</li><li>polymaker PolyTerra Forest Green PLA</li></ul>Blue Case<ul><li>GIANTARM Matte Navy Blue PLA</li><li>polymaker PolyTerra Sapphire Blue PLA</li></ul>

Multi-Use Case with Inserts

sd card

Alove

Set of 6 gridfinity bins to store metric and SAE combination wrenches. Large bins print in 2 sections to fit onto Bambu build plates. &nbsp;

Gridifinty Combination Wrench Holder (metric/ SAE)

wrench

This Bin Generator can automatically divide a drawer, box, etc. into perfectly sized binsWhile you can make a simple grid, you can also divide into rectangles of different sizes or more complex shapes to suite your needs.&nbsp;Here are some examples of how you can control and divide the space from simple to complex:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000517716/design/2024-06-28_d55cb52e1063a.png" width="2639" height="620"></figure>&nbsp;Go ahead and try it out by hitting the customize button or read on below for more information.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000517716/design/2024-06-29_6691eddf2baff8.webp" width="663" height="95"></figure>&nbsp;Inputs:<ul><li>Size of drawer (or box, or whatever) in X and Y</li><li>desired depth/height of bins</li><li>adjust divide points, and cut direction one at a time<ul><li>divide points are positioned in X and Y using sliders<ul><li>if you need exact sizes you will have to do a bit of math to double check the size of the bins.</li></ul></li><li>cut direction at each divide point can be set to: Left, Right, Both, or To Next in either L/R direction (X) or Up/Down (Y)<ul><li>Order of operations matters If using the To Next option. Divide 2 will be able to stop at one of the cuts of Divide 1, but not at the cuts of Divide 3</li></ul></li><li>See below for an example setup</li></ul></li><li>Adjust remaining parameters such as:<ul><li>base thickness</li><li>wall thickness</li><li>radius</li><li>gaps between each bin</li><li>stackable option</li></ul></li></ul>&nbsp;&nbsp;The bins themselves are simple: a flat base with rounded corners and a wall.&nbsp;You can turn on the “stackable” setting, which will create an inset base. This will not work if you have too small of a corner radius (limit depends on the wall thickness…6mm radius is ok for 1.2mm wall thickness) or if your divided shape is too complicated, and it will increase processing time.<figure class="image image_resized" style="width: 30.43%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000517716/design/2024-06-28_ca27f00d12ee88.png" width="720" height="246"></figure>If you make stackable bins, of course you must make the one on top the same size as the one below, or the same size in one direction and smaller in the other direction.&nbsp;&nbsp;&nbsp;Printing:<ul><li>Download the customized files from the MakerWorld OpenSCAD implementation, or use your own OpenSCAD install to output files.</li><li>Split the model into objects and then you can move each bin around seperately and arrange on plates<ul><li>(right click on the model → &#34;split&#34; → “to objects”)</li></ul></li><li>If any bins are too big to fit on the print bed, you can use the cut feature in the slicer to divide or go back to the customize and edit the size.</li><li>You can download my print profile to copy my settings, but generally nothing special is needed<ul><li>high layer height ok (I use 0.28mm extra draft)</li><li>Stackable bases version has angled overhangs so no supports are needed.</li></ul></li></ul>&nbsp;Example:Here is an example with four divide points and the cut options specified.&nbsp;<figure class="image image_resized" style="width: 65.77%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000517716/design/2024-06-29_0813b2d4269b88.png" width="1365" height="963"></figure>

The Bin-Erator (Drawer Bin Generator)

<h2>Cake Topper Generator</h2>Cake Topper Generator can create a cake topper for your special occasion. &nbsp;It is highly customizable. Here is what you can change:<ul><li>Font</li><li>3 lines of text<ul><li>Font size for each line</li><li>Y offset for each line</li><li>Extrusion layer count for each line (Different layer count allows you to change filament without AMS)</li></ul></li><li>Text boldness</li><li>Text spacing</li><li>Line spacing</li><li>Outline thickness</li><li>Outline extrusion layer count</li><li>Post<ul><li>Spacing between posts (0 for single post, double otherwise)</li><li>Width </li><li>Length (0 for no post)</li></ul></li><li>Add support (connect loose text)</li></ul><h3>Guide to Successful Creation:</h3>It can be overwhelming when you customize you first cake topper. Here is a guide on how to create one:<ol><li>Zero all text offset, line spacing parameters, and outline thickness.</li><li>Choose the font you want</li><li>Enter the text for 1 to 3 lines. </li><li>Set font size of each non-empty line.</li><li>Generate the model</li><li>Adjust text boldness to your like. </li><li>Adjust text spacing by very small amount such as +/-0.02 each time. Repeat until it is what you want. </li><li>If text are not connected, adjust outline thickness by +/-0.5 each time. Repeat until all are connected. In case there are spaces in text, you may need to add support to add a small frame to connect text together.</li><li>Adjust text offset to by +/-0.5 each time. Repeat until text overlapping is what you like.</li><li>Repeat #5 to #9 until it is what you want. </li><li>Adjust post spacing until they touch the bottom of text</li><li>Click on Download to download it.</li></ol>&nbsp;<h2>Notes:</h2><ul><li>Automatic text packing – You have freedom to create your cake topper with 1 to 3 lines of texts. Just empty the text field and the line is ignored. All non-empty text lines are packed automatically.  </li><li>0 to 2 posts – You can create a cake topper with 1 or 2 posts by changing Post_Spacing. Set spacing to 0 for 1 post, otherwise, it is 2 posts. If you want a cake plaque, set Post_Length to 0.</li><li>Multi-colors with and without AMS – Not everyone has AMS. But this doesn&#39;t limit you to use only 1 color for your cake topper. With or without AMS, you can print use 4 colors: 1 color for each of the 3 text lines, and 1 color for text outline and posts. Each text line has its own extrusion layer count. By setting different layer count for different texts, you can then add pause to layers after slicing in Bambu Studio. During the pause, you can then switch filament. For those who has AMS, all text can have the same layer count, and different filament can be assigned to different parts in Bambu Studio.  </li><li>Text connection – If there is any space in the text or font is narrow, the cake topper may not be created in a single piece due to excessive gap between text. Or with certain fonts, texts may be squeezed together too close. What you can do is to change outline thickness and text boldness, as well as text offset, and text spacing to make sure everything touch to each other and not too close. </li></ul><h3> </h3><h2>Sample Cake Topper Generator Model:</h2>The Cake Topper Generator model was generated by the Customizer and printed on A1 Mini without AMS. The following parameters were used. <blockquote>Font=&#34;HarmonyOS Sans SC&#34;Text_1=&#34;Cake&#34;Text_2=&#34;Topper&#34;Text_3=&#34;Generator&#34;Text_1_Size=20Text_2_Size=20Text_3_Size=15Text_Boldness=0.5Text_Spacing=1.00Text_1_Offset=-1   //For better text 1 and text 2 connectivityText_2_Offset=4    //Add spacing between text 2 and text 3 because they came too closeText_3_Offset=(0)Text_1_Layers=4Text_2_Layers=4Text_3_Layers=6    //Extra layers for text 3 so pause can be added to switch filamentOutline_thickness=2.0Outline_Layers=8Post_Spacing=60Post_Width=3Post_Length=80Add_Support=falseExtrusion_Layer_Height=0.20</blockquote><h3>How to print model with different filament without AMS?</h3><ol><li>Load the model 3mf file in Bambu Studio<figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000516554/design/2024-06-29_549499ec744b8.png" width="1918" height="1017"></figure></li><li>Slice the model</li><li>Click on bottom right Layers icon to switch viewing mode to single slice. <figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000516554/design/2024-06-29_d3e27bfa1e134.png" width="1412" height="931"></figure></li><li>Scroll the slider until the layer without outline and post, or the layer you want to change color. This is basically the layer of Outline_Layers parameter plus 1. For example, if Outline_Layers is 8, then slide to layer 9.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000516554/design/2024-06-29_91c1514e68be78.png" width="1159" height="440"></li><li>Right click on (+) slider and click on Add Pause to add pause to beginning of this layer.</li><li>If there are text with other layer count, keep moving slider up until the layer you want to change filament. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000516554/design/2024-06-29_f77974cd4310c8.png" width="1416" height="545"></figure></li><li>Repeat #5 and #6 until you have added pause to all layers you want to switch filament. </li><li>Now, you can click on Print Plate to start printing.</li><li>The print will pause at the layer you have added pause. You can then Unload the current filament, Load a different filament, and Resume Printing. Repeat this step until the print finished. </li><li>You will see color layering in the completed print.<img class="image_resized" style="width: 45.88%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000516554/design/2024-06-29_6c23876ade1498.png" width="625" height="427"></li></ol>&nbsp;<h3>Sample Happy 48th Birthday Model:</h3>This is the sample cake topper printed with A1 mini without AMS to showcase how to use custom fonts. You need to use OpenSCAD to print this model. Here is the configuration parameters. <blockquote>Font=&#34;Brush Script MT&#34;; Text_1=&#34;Happy&#34;; Text_2=&#34;48th&#34;; Text_3=&#34;Birthday&#34;; Text_1_Size=25; Text_2_Size=35; Text_3_Size=25; Text_1_Offset=5; Text_2_Offset=0; Text_3_Offset=(0); Text_1_Layers=4; Text_2_Layers=8;   Text_3_Layers=4; Text_Boldness=0.5; Text_Spacing=1.00; Outline_thickness=2.0; Outline_Layers=8; Post_Spacing=60; Post_Width=3; Post_Length=80; Add_Support=false; Extrusion_Layer_Height=0.20;</blockquote>Step to print the model:<ol><li>Download and install OpenSCAD</li><li>Open OpenSCAD</li><li>Copy Customizer code of this model, and paste it to Editor in OpenSCAD<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000516554/design/2024-06-29_8484ebb5b0588.png" width="1386" height="937"></figure></li><li>In the top menu bar, click on Help &gt; Font List. You can use filter fonts by name, and open the font file to see sample of the font. Copy the desired font name and paste it to Font parameter in the editor of OpenSCAD.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000516554/design/2024-06-29_16a205137633e.png" width="1387" height="941"></figure></li><li>Change parameter to your like. Then click on Preview to see the model. Repeat updating the parameters andpreview model until you are satisfied. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000516554/design/2024-06-29_d7b913d4a87768.png" width="1396" height="867"></figure></li><li>Click on Render and then Export to export model in stl format.</li><li>Import the stl file in Bambu Studio. </li><li>Don&#39;t forget to slice the model and add pause to first text only layer (by default layer 9) before printing. Once the printing is paused, switch filament and resume. </li></ol><h3>How to easily assign filament for use with AMS?</h3>The CakeTopper code when creating the model breaks it into multiple parts.<ol><li>Download the 3mf after you customize it</li><li>Open the 3mf file in Bambu Studio</li><li>Add filaments for the model<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000516554/design/2024-06-29_8d95649702413.png" width="522" height="273"></li><li>Select and Right click on the model and then click on Split &gt; To Parts. (!)The code was specially done to create model with multiple parts. Split is generally not available in most model. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000516554/design/2024-06-29_203db8de682f28.png" width="1337" height="682"></figure></li><li>In Process section, select the model part and change filament to what you want. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000516554/design/2024-06-29_0caffd466defd.png" width="1703" height="583"></figure></li><li>Now you can slice the print the your cake topper.</li></ol>&nbsp;&nbsp;&nbsp;<h2>Bonus:</h2>You can use Cake Topper Generator to build Drink Stirrer. <figure class="image image_resized" style="width: 51.04%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000516554/design/2024-06-29_0533ba0579e35.png" width="903" height="360"></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Cake Topper Generator

Cake

Make-A-Print246

Hello print enthusiasts,here you can find the first version of my robot hand. &nbsp;<img class="image_resized" style="width: 15.68%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000510770/design/2024-06-25_f412a2c9cbac.png"> The hand is assembled from several parts:&nbsp;<img class="image_resized" style="width: 58.22%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000510770/design/2024-06-25_bb20f1e496db8.png">&nbsp;When assembled, the hand can still move freely. The hand holds its position reliably, thanks to a locking mechanism in the joints. &nbsp;Please also take a look at the assembly instructions to put it together correctly.The alignment of the parts is important. That´s why I have numbered the fingers. &nbsp;It is also important that the support contours are removed cleanly.&nbsp;I am also uploading the STEP files and would be very happy to see remixes of this construction. &nbsp;I hope you enjoy printing and assembling the model. &nbsp;Best regardsAlexander Make-A-Print &nbsp;<img class="image_resized" style="width: 22.6%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000510770/design/2024-06-25_9366df857a7f9.png">

Moveable Robot Hand (left) joined together (PLA)

hand

Electrical diagram drawing tool, including all basic marks for components. Printed piece is only 1mm thick, can be fitted into a wallet, for example. Perfect and easy-to-make tool for learning electrical basics and drawing simple circuits.

Electrical diagram drawing tool

drawing

Eternity Labs

A simple and quick ruler to help you make your ideas come into the real world - The imperial measurement system INCHES!&nbsp;Takes 20 Mins to print single colour, and 27 mins for multi colour.Features:<ul><li>Diameter - 1-10mm</li><li>Angles - 10, 20, 30, 40, 45, 50, 60, 70 Degrees</li><li>Thickness Gauge - 0.2mm, 0.4mm, 0.6mm, 0.8mm, 1mm thickness for ruler</li></ul>Consider giving me a boost if this model was useful!&nbsp;Ways to support me &amp; access to commercial licences:&nbsp;<a href="www.patreon.com/Eternity3D" rel="nofollow">patreon.com/Eternity3D</a> - Free membership available for some .stl access, paid membership needed to resell prints of my designs.&nbsp;One Time Direct support - <a target="_blank" href="https://buymeacoffee.com/eternity3d" rel="nofollow noopener">https://buymeacoffee.com/eternity3d</a>

3D Maker's Ruler - 7 Inches - 20 minute print!

ruler

thekreativekozij

simple-ish wheel chuck for my camper trailer, can be used for other vehicles, print with atleast 4 walls and use strong infill, recomend using ASA or PETG

28" trailer wheel chuck

RV Trailer

FunkyArt

Make sure there is support under the fingers, I recommend the tree support, increase the thickness of the support tree if necessary.

Ring and jewelery-holder hands

holders

nickp42

ryobi battery wall mount perfect for getting all your batteries organized

Ryobi Battery Wall Mount Holder

ryobi

鸦无量

I noticed that it seems no one has posted a parameterized model of the IKEA pegboard, so I decided to complete this task! OpenSCAD is a great parametric modeling tool, and I spent a few days learning how to use it. After some effort, I finally achieved the parameterization of the IKEA pegboard model. Now you can customize the width, height, and thickness of the pegboard, and you can also choose to add screw holes in the four corners to fix it in certain places. 我注意到似乎没有人发布过参数化的宜家洞洞板模型，因此我决定完成这项工作！ OpenSCAD是一个不错的参数化建模工具，我花了几天时间来学习如何使用它。经过一番努力，我最终实现了宜家洞洞板模型的参数化，现在你可以自定义洞洞板的宽度、高度、厚度，还可以选择在四个角上增加螺丝孔来将其固定在某些地方。&nbsp;I chamfered both the pegboard and the edges of the holes. You should know that creating chamfers in OpenSCAD is quite challenging. The project &#34;Chamfers-for-OpenSCAD&#34; on GitHub helped me, and its author is SebiTimeWaster. I borrowed one of the modules (named chamferCylinder) from it, which can generate cylinders with chamfers. By combining these cylinders with the hull() function, I obtained the desired geometry. Additionally, some chamfers were created by using the difference() function to subtract cones. 我在板子和洞的边缘都做了倒角，要知道倒角在OpenSCAD是很难实现的。GitHub上的Chamfers-for-OpenSCAD这个项目帮了我，它的作者是SebiTimeWaster。我借用了其中的一个模块，名为chamferCylinder，它可以生成带倒角的圆柱体。我通过hull()函数将这些圆柱组合，就得到了我想要的几何体。还有一些倒角是通过difference()函数减去圆锥体来实现的。<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000485806/design/2024-06-06_f6dbae31463088.png"></figure>[Updated on 2024/06/06] 1. Added the parameterized model version 2.0. *Please use the file &#34;ikea_pegboard_v2.0.scad&#34; to generate the model. 2. Variables have been grouped. 3. Added &#34;Infinite Extension Mode&#34;, which, when enabled, generates half of the holes at the edge of the pegboard so that you can join multiple pegboards together.&nbsp;[2024/06/06更新] 1. 增加了2.0版本的参数化模型*请改用“ikea_pegboard_v2.0.scad”这个文件来生成模型。 2. 对变量进行了分组。 3. 新增“无限扩展模式”，开启后程序会在洞洞板边缘生成一半的洞，这样你就可以将多块洞洞板拼成一个。&nbsp;Thanks to the project &#34;IKEA宜家洞洞板&#34; by 幻模堂 for inspiring the 2.0 version!感谢幻模堂的项目“IKEA宜家洞洞板”为2.0版提供了灵感！<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000485806/design/2024-06-06_f34f7bfea1a6e8.png"></figure>In version 2.0, you can enable Infinite Extension Mode by setting the variable `infinite_extension_mode` to `true`. You can select the direction you want to expand in the &#34;Infinite Extension Mode Settings&#34; variable group. You can choose to generate only one corner piece or edge pieces and then mirror it in Bambu Studio. This way, you can quickly obtain a larger pegboard! 在2.0版本里，你可以通过将infinite_extension_mode设置为true来开启无限扩展模式，然后可以在“无限扩展模式设置”这个分组里选择想要扩展的方向。你可以选择只生成一个角或边然后在Bambu Studio里镜像它。这样就能快速获得一面更大的洞洞板！<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000485806/design/2024-06-07_5291de281d903.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000485806/design/2024-06-06_d91de8de38558.png"></figure>[Updated on 2024/06/19] 1. Added the parameterized model version 3.0. *Please use the file &#34;ikea_pegboard_v3.0.scad&#34; to generate the model.2. Added &#34;Fewer Screw Mode&#34;, when enabled, will generate screw holes at the joints of two pegboards, thereby reducing the number of screw holes required for installation.&nbsp;[2024/06/19更新] 1. 增加了3.0版本的参数化模型 *请改用“ikea_pegboard_v3.0.scad”这个文件来生成模型。 2. 新增“更少的螺丝模式”，开启后会在两块洞洞板的接缝处生成螺丝孔，以此来减少安装时所需的螺丝孔数量。<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000485806/design/2024-06-19_695234efcb504.png"></figure>In version 3.0, you can find the `fewer_screw_mode` variable in the Infinite Extension Mode Settings. By setting `fewer_screw_mode` to `true`, you can enable the Fewer Screw Mode. This mode will change the arrangement of holes on the pegboard and will also invalidate the `distance_to_edge` variable, meaning you will not be able to freely adjust the position of the screw holes.After enabling the Fewer Screw Mode, several small discs will be automatically generated. You can use these discs to cover the screw holes, achieving the effect of hiding the screw holes.在3.0版里，你可以在无限扩展模式设置里找到fewer_screw_mode这个变量，将fewer_screw_mode设置为true，就可以开启“更少的螺丝”模式。这个模式会改变洞洞板上孔的排列方式，还会将distance_to_edge这个变量无效化，你将无法自由地调整螺丝孔的位置。“更少的螺丝”模式开启后，还会自动生成几个小圆片，你可以用这些圆片盖住螺丝孔，来达到隐藏螺丝孔的效果。<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000485806/design/2024-06-19_4844d2ca35754.png"></figure>You can find some pre-generated pegboard examples in the Print Profile, but I highly recommend using the parametric model to customize the dimensions you desire. MakerWorld will provide an online tool on the project page to generate the model, or you can download the “ikea_pegboard_v3.0.scad” file from the project to your local machine and run it with OpenSCAD. Due to the complexity of the calculations in the parametric model, generating it locally may take several minutes to even a few hours each time. (The poor multithreading optimization of OpenSCAD should be blamed for this!) However, the online tool seems to have optimized multithreading, resulting in very fast generation speed! 你可以在打印配置里找到一些我已经生成好的洞洞板示例，但我更推荐你使用参数化模型来定制你想要的尺寸。MakerWorld会在项目页面提供线上工具来生成模型，或者你也可以下载项目里的“ikea_pegboard_v3.0.scad”这个文件到本地，然后用OpenSCAD来运行它。由于参数化模型的计算比较复杂，如果你在本地运行，每次生成可能需要数分钟甚至几小时。（OpenSCAD糟糕的多线程优化应该背这个锅！）但线上工具似乎对多线程做了优化，生成速度非常快！<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000485806/design/2024-06-06_28b195210a3658.png"></figure>There is a way to speed up the model generation by adjusting the `$fn` variable, which determines the fineness of the generated model. When using the online tool to generate models, it is recommended to set the value of `$fn` to 50. When running locally, you can try setting `$fn` directly to 100.When using the online tool to generate models, the `$fn` variable will be hidden, and you will need to modify the value of `$fn` directly in the code to adjust the detail level of the generated model. 有个可以加快模型生成速度的方式就是调整$fn这个变量，这个变量决定了生成模型的精细度，使用线上工具生成模型时建议将$fn的值设置为50，在本地运行可以尝试直接将$fn拉到100。当使用线上工具生成模型时，$fn这个变量会被隐藏，你需要直接在代码里修改$fn的值才能调整生成模型的精细度。<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000485806/design/2024-06-06_cd3fc6cdecd5b.png"></figure>[Pegboard Configuration Variables] 1. `width`: The width of the pegboard (mm), it is recommended to set as a multiple of 20, with a minimum value of 40. Default value is 80. 2. `height`: The height of the pegboard (mm), it is recommended to set as a multiple of 20, with a minimum value of 40. Default value is 80. 3. `thickness`: The thickness of the pegboard (mm), it is recommended to set between 3 and 5. Default value is 5. 4. `add_corner_holes`: Whether to add corner holes. Default value is true. 5. `corner_holes_diameter`: The diameter of the corner holes (mm), it is recommended to set as 3.4 or 4.4. Default value is 4.4. 6. `distance_to_edge`: The distance from the corner holes to the edge (mm), it is recommended to set between 8 and 12. Default value is 8. 7. `add_spacers`: Whether to add spacers, used to space the pegboard from the wall surface. Default value is true.The variable `add_spacers` can only function when the variable `add_corner_holes` is set to true. 8. `spacer_diameter`: The diameter of the spacers (mm), recommended value is 6.4 to 20. Default value is 12. 9. `spacer_height`: The height of the spacers (mm), recommended value is 7 to 15. Default value is 7.10. `infinite_extension_mode`: Infinite Extension Mode, when enabled, the program will generate half a hole at the edges of the pegboard.11. `expand_up`: Expand upward. This takes effect only when `infinite_extension_mode` is set to `true`.12. `expand_down`: Expand downward. This takes effect only when `infinite_extension_mode` is set to `true`.13. `expand_left`: Expand leftward. This takes effect only when `infinite_extension_mode` is set to `true`.14. `expand_right`: Expand rightward. This takes effect only when `infinite_extension_mode` is set to `true`.15. `fewer_screw_mode`: Fewer Screw Mode, when enabled, will generate screw holes at the joints of two pegboards, thereby reducing the number of screw holes required for installation. The extra small discs are used to cover the screw holes.  [洞洞板配置变量] 1. `width`: 洞洞板宽度（mm），建议设置为20的倍数，最小值为40。默认值为80。 2. `height`: 洞洞板高度（mm），建议设置为20的倍数，最小值为40。默认值为80。 3. `thickness`: 洞洞板厚度（mm），推荐值为3到5。默认值为5。 4. `add_corner_holes`: 是否在四角添加螺丝孔。默认值为true。 5. `corner_holes_diameter`: 螺丝孔直径（mm），推荐值为3.4或4.4。默认值为4.4。 6. `distance_to_edge`: 螺丝孔到边缘的距离（mm），推荐值为8到12。默认值为8。 7. `add_spacers`: 是否添加垫片，用于使洞洞板远离墙面。默认值为true。变量add_spacers必须在变量add_corner_holes为真时才能起作用。 8. `spacer_diameter`: 垫片直径（mm），推荐值为6.4到20。默认值为12。 9. `spacer_height`: 垫片高度（mm），推荐值为7到15。默认值为7。 10. `infinite_extension_mode`: 无限扩展模式，启用后程序会在洞洞板边缘生成半个孔。11. `expand_up`: 向上扩展。仅在infinite_extension_mode为true时生效。12. `expand_down`: 向下扩展。仅在infinite_extension_mode为true时生效。13. `expand_left`: 向左扩展。仅在infinite_extension_mode为true时生效。14. `expand_right`: 向右扩展。仅在infinite_extension_mode为true时生效。15. `fewer_screw_mode`: “更少的螺丝”模式，开启后会在两块洞洞板的接缝处生成螺丝孔，以此来减少安装时所需的螺丝孔数量。额外的小圆片用于遮盖螺丝孔。&nbsp;I used PETG filament to 3D print several generated pegboard models, and the results were excellent!  我用PETG耗材3D打印了几个生成好的洞洞板模型，效果非常不错！<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000485806/design/2024-06-06_c46ac005d885f8.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000485806/design/2024-06-06_51f7e84f0ea0e8.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000485806/design/2024-06-06_7c8a2e73d04ee.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000485806/design/2024-06-06_7515662af72208.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000485806/design/2024-06-19_0d6220a70bba3.png"></figure>I hope you will like this project! I would be very happy if it can be of help to you. 希望你能喜欢这个项目！如果它能帮到你，我会很开心。:)

Parameterized IKEA SKADIS Pegboard | 参数化宜家洞洞板

walls

ByteSlinger

This is a scraping tool to run down the length of paint rollers after you've finished painting, to squeeze the remaining paint out of them and to clean them. I've kept it relatively thin to reduce printing time and included a rudimentary hand groove set and thumb slot. Print Settings The 3MF I've included are set to 50% infill. I'd recommend 50% as a minimum when printing this as you will be putting quite a lot of force on it when in use.&nbsp;<figure class="image image_resized" style="width:50%;"><a href="https://www.buymeacoffee.com/JoshForwood" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/177347/2023-11-16_0npelx9qi5vt.png"></a></figure>If you like my designs, thank me by <a target="_blank" href="https://www.buymeacoffee.com/joshforwood" rel="nofollow noopener">Buying Me A Coffee Here</a>!

Paint Roller Cleaner

painting

kevr102

This is a Handy 3D Printed Vice created using Fusion 360 and printed with the Bambu Lab X1 Carbon.It took a few iterations with mainly the screw drive to get this correct, but all in all a great little project.It would have been ideal to run through the main frame thread with a tap as it was a bit tight but I didn't have one so I applied some of the grease that came with the X1 and this worked well after a few turns of the screw in and out.I made a slotted adapter which fastens onto the end of the thread with a 5mm Allen head set screw, this in turn slots into the slider carriage and is secured in place with a 5mm Allen head set screw allowing the carriage to be retracted easily, trying to get the thread started on the collet with a 5mm Allen bolt it snapped off, I just screwed the bolt into the remaining part and it works perfectly.Great little vice which can be used for numerous applications like holding components for soldering etc.The initial mainframe didn't have any fixing holes so i added 4 with a countersunk.Thanks for looking.buymeacoffee.com/kevr102

Handy Vice Designed with Fusion 360 and Printed with Bambu Lab X1 Carbon

clamps

Roger Theriault

Need a flange to connect a pipe? An umbrella stand? Adapter for a fan hose? Pipe cap?&nbsp;Print your own with this parametric flange generator, designed to support most common flange shapes that use plastic. It supports bolt holes, blind flanges, and even square flanges.&nbsp;Just click Customize to get started, and save yourself a trip to the hardware store!&nbsp;If there&#39;s a feature you need, please leave a comment with details. And I&#39;d love to see what you create, please share pictures!

Flange-o-matic - parametric flange generator

flange

Deltaprints

Octagonal Bonsai Pot

planter

geekm0nkey

This is a copy of an Oni Mask with removable teeth for multi-color printing. I provided both the source for this model and it's inspiration.

Samurai - Oni Mask

samurai

Lisa Lisa Made

Organize your morning and evening pills in this aptly pill shaped organizer. There are two compartments per “pill” for each day of the week. The lids have a sun and a moon in addition to the day of the week to assist in organization. The main body is printed all as one piece, and then there are seven individual lids that snap into place and can be slid to reveal either the morning or evening compartment.&nbsp;*Bonus* Single unit has been added with two lid options - blank or sun & moon (no day of the week text) !&nbsp;Design Features:<ul><li>Easily customizable - because the lids are loose, you can choose which day to start your week with (the 3DM model has the lids grouped into their own assembly separate from the main body for easily making the lids a different color from the main body)</li><li>No additional parts needed - the lids are designed with a friction fit to snap into place and do not require any magnets to stay closed</li><li>Single plate print - all lids and the main body fit onto one plate, even when printing in two colors by object (~4 hour print in PLA)</li><li>No printing support required - all parts were optimized to not require any support while printing on the X1 Carbon (134g total)</li></ul>Size & Capacity:<ul><li>243.5mm long x 70mm wide x 23mm tall (~9.58" x 2.75" x 0.9")</li><li>I can easily fit 7 pills of varying sizes in one half compartment, or 4-6 if just filling it with medium/larger pills (if folks are interested I can easily maker a taller version that could hold more pills)</li></ul>Print Setting Variations (for PLA on an X1 Carbon):<ul><li>Standard 0.2mm layer height with the 0.4mm nozzle on PEI textured plate</li><li>Switched to “adaptive cubic” infill while in “global” settings</li><li>Selected “print by object” while in “global” settings</li><li>Customized variable layer height settings separately for body and lids to get enough detail in chamfered mechanical areas without increasing entire print time significantly by using a fine layer height for entire print</li></ul>Assembly & Use:<ul><li>Sliding dovetailed lids will require a little force to “snap” into place the first time (lids should slide smoother after a few rounds of opening and closing to break the mechanism in)</li><li>There are protruding chamfered areas on the underside of the lid that keep it from just sliding open whenever - this means there is some small resistance to slide the lid into the “open” position</li><li>A stopper is located on the center bottom of the lid to keep the lid from sliding too far open - thus, only one side of each day is open at any given time</li><li>Please keep in mind that there is no “child lock” on this design and it is not meant to keep medications secure - for personal use at your own discretion!</li></ul>

Pill Pill Organizer - 7 Days - Morning & Night Compartments

pills

River City 3D

Claymore doorbell accessory. I used 14 gauge wire and twisted it with a drill, add heat shrink to the ends to hold it together. Back plate works well with 2 screws or command strips and claymore slides over easily. pinch other end of twisted wire behind ring, google, or other type door bells.

Claymore doorbell accessory 

military 

Victor

Design reference rules, it is specially useful while modeling and taking measurements of real world objects. They are designed to fit inside Digital Calipers Case. You might also like these:<a href="https://www.printables.com/model/280190-thickness-reference-rules-wall-layer-05-to-5mm" rel="nofollow">https://www.printables.com/model/280190-thickness-reference-rules-wall-layer-05-to-5mm</a>&nbsp;Thank you for printing my model!If you'd like you can buy me a coffee here: <a href="https://www.buymeacoffee.com/vitim" rel="nofollow">https://www.buymeacoffee.com/vitim</a>

Fillet Radius Finder (Inner/Outer) - Design Reference Ruler 1 to 12mm - Keychain Version

3d printing

A modular storage system that allows you to build custom shelves and drawers however you want them.&nbsp;The Hex Storage uses hexagonal storage tubes/shelves that can be slotted together using a peg insert.  Please Note: These do not take 26 hours to print a single item. The profiles contain 6-7 plates with one variation on each plate. Pick and choose the parts you want from the profiles. The Hexs are available in 3 styles<ul><li>Standard (85mm high internal, see measurement image for other dimensions)</li><li>Med Hex (3x 41.5mm internal hexes, plus 3 smaller diamonds)</li><li>Mini Hex (15x 19.25mm internal hexes, plus 6x smaller half hexes)</li></ul>There are also 3 different designs of drawers (which can fit into the standard Hex tubes):<ul><li>Standard Drawer (Single drawer uses the full length of the Hex space)</li><li>Divided Drawer (Features a dividing wall half way along to separate storage)</li><li>Labelled Drawer (Functionaly the same as the standard drawer, but features an area for adding a text label)</li></ul>ProfilesI have included three profiles which have been set up and tested thoroughly.Each profile features all variations of the items, but each on a separate plate. So you can just select the item you want, choose the amount (you can position up to 4 hexes and 6 pegs on a single X1/P1 plate) and print from there.<ul><li>AMS Hex Storage (As described above, and is pre-painted for printing in two colours with an AMS)</li><li>One Colour Hex Storage (As described above, but intended for printing with a single colour)</li><li>Filament Change Hex Storage (As described above, but with pre-applied manual filament changes for multi-colour printing without an AMS)</li></ul>&nbsp;Customise TextOne of the drawers features a text panel so you can label it. If you just use the STL, this is blank so you can either add text digitally yourself, or use it for a paper label. My profile includes text pre-applied to this area which you can customize in Bambu Studio to whatever you like. Please see the instructional picture above for how to do thisIn the profile, the settings are already applied, but if you&#39;re applying it yourself, I&#39;d suggest making the text depth 0.6mm.&nbsp;Print Settings:<ul><li>Orientation:<ul><li>Hex&#39;s (For all Hexes, print them standing upright, with the hole at the top)</li><li>Drawers<ul><li>Multi-colour (AMS or Filament Change): For all drawers, print them with the honecomb affect on the print bed, and use tree support (build plate only), to support printing of the back</li><li>Single Colour These can be oriented same as above, or you can avoid support material when printing single colour by lying it either flat along it&#39;s base, or along one of the side walls (though doing so will mean you&#39;ll see layer lines across the front of the drawer)</li></ul></li><li>Pegs Pegs should be printed standing upright. This will take a bit longer, but any other orientation will result in a lot of overhang and any deformation could affect the peg&#39;s ability to fit into the hex slots. </li></ul></li><li>Material: PLA</li><li>Layer Height: 0.2mm</li><li>Walls: <ul><li>Hex&#39;s &amp; Drawers: 3</li><li>Pegs: 3-4 (3 will be fine unless you&#39;re putting significant weight on these shelves, but 4 walls will result in pretty much solid print which can make the pegs slightly stiff to fit, thought they still work fine).</li></ul></li><li>Infill: 15% Gyroid</li><li>Support:<ul><li>Hexs: None</li><li>Drawers: Tree support, build plate only, for the inside of the drawers.</li><li>Pegs: A brin is recommended on these due to their thin and tall design</li></ul></li></ul>

Modular Hex Storage

modular storage 

Fletch

A stand for displaying several of my models. Great for displaying the models on a bookshelf or table.&nbsp;<a target="_blank" href="https://makerworld.com/en/models/386483" rel="nofollow noopener">Zelda A Link to the Past Map</a><a target="_blank" href="https://makerworld.com/en/models/456194" rel="nofollow noopener">Zelda A Link to the Past Map - Dark World</a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/507034#profileId-422791" rel="nofollow noopener">Super Mario Bros. 3 World 1</a><a target="_blank" href="https://makerworld.com/en/models/508322" rel="nofollow noopener">Super Mario Bros. 3 Landscape</a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/458087" rel="nofollow noopener">Pac-Man Level 1</a><a target="_blank" href="https://makerworld.com/en/models/460971" rel="nofollow noopener">Donkey Kong Level 1</a><a target="_blank" href="https://makerworld.com/en/models/463583" rel="nofollow noopener">Space Invaders Level 1</a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/474964" rel="nofollow noopener">Pokemon Johto Map</a><a target="_blank" href="https://makerworld.com/en/models/475871" rel="nofollow noopener">Pokemon Kanto Map</a>

Frame Display Stand

kellytrinh

Just a simple Garbage Can / Trash Can. &nbsp;I personally use this one for my 3D Printing scraps.<h2>2 print profiles: one with logo, the other without logo</h2>&nbsp;Check my models for my other garbage bin shapes.&nbsp;Enjoy!

Garbage Bin, Trash Can, Garbage Can, Trash Bin - Oval top

trash cans

mail.iou

This is a desiccant box specially designed for X1/P1 AMS. There is also a desiccant box suitable for <a target="_blank" href="https://buy.mi.com/fr/item/3204200022" rel="nofollow noopener">Xiaomi Mi Temperature and Humidity Monitor 2</a> and <a target="_blank" href="https://www.amazon.com/dp/B0C74T4JH1" rel="nofollow noopener">circular hygrometer</a>.&nbsp;Assembly: Simply push the lid down to complete assembly.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000399829/design/2024-03-28_e55fa320feb95.png">

DryBox for X1/P1 AMS with Hygrometer

silica box

Whimsii3D

I have several of these PCL705 Ryobi vacuums around my house and garage. The way Ryobi wants you to wall mount them is a single screw in the wall and the slot on the backside of the vacuum.Ive had problems with the screw pulling out of drywall and getting loose, so I designed this fast and easy to print bracket. I would say PETG would be preferred but PLA should be fine. Add support under the hook area. Also included the .f3d file if you'd like to make any improvements to the design.

Ryobi Handheld Vacuum PCL705 Wall Mount Bracket

Ryobi

OCDTOOLFREAK

Yes there are lots of other battery holders including my own, BUT this one is king of aesthetics with its color a and design looking to par with the DeWalt family of tools. Mounts solid to the wall and holds up to 4 of even the big flex volt batteries. Hollowed out to not use so much plastic and and strong enough to keep them locked in. Lets face it we all buy the most expensive tools because A- They work great and B- They look good so the accessories have to match. &nbsp;Thanks for the support and appreciation for my work…..as you all know printing can be expensive and creating takes time if you'd like to support me even further then buy me a coffee here….. https://www.buymeacoffee.com/ocdtoolfreak

DeWalt 20V Battery 4x wall Mount

dewalt

lovatodude

Created some socket trays for the Milwaukee low profile packout case. You will need to trim off a annoying piece that sticks out on each corner. 6mm to 24mm (Deep and standard sockets) 1/4 to 1" (Deep and standard sockets)I've also added some slots for other hex and torx sockets that I commonly use.&nbsp;The files labeled as blank are for you to make your cut outs in CAD.

SocketTrays for Low-Profile PACKOUT

packout

Zez0000

Remix of <a target="_blank" href="https://makerworld.com/en/models/119995#profileId-129132" rel="nofollow noopener">https://makerworld.com/en/models/119995#profileId-129132</a> with Bitcoin Logo

Loud Whistle Bitcoin logo

crypto

LittleFiggisKnits

This a double spiked yarn holder. One is attached to the base plate, the other is removable. Each one has a compatible disc. There is an additional file for a smaller spiked plate and disc that is good for smaller balls of yarn. The smaller spiked plate is designed to nestle in to the double one the same way as the first. &nbsp;I printed this on a Bambu P1P. I tried it in both PLA Basic and Metal. There is no need for a brim or supports.In my prints, they were immediately ready for use with no clean-up. 0.2 mm layer and standard strength. &nbsp;With all these yarn holders I find that they can be slippery. On all of mine I attached a small amount of rub backing or no-slip material to the base. Below is a link the amazon page for the stuff I used, but I think there are better options. &nbsp;https://www.amazon.com/gp/product/B086X5JDBT/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1&nbsp;&nbsp;Happy printing and knitting or crochet!&nbsp;&nbsp;

Yarn Holder

crochet and sewing

ThreeD-Michael

<figure class="table" style="height:330.43px;width:90%;"><table class="ck-table-resized" style="background-color:rgb(255, 255, 255);border:1px solid rgb(230, 77, 77);"><colgroup><col><col></colgroup><tbody><tr><td style="border:1px solid rgb(230, 77, 77);padding:0.4em;vertical-align:top;width:50%;">Please also check out my latest design, a Long Range Dog Whistle at 7000 Hz. Please download <a target="_blank" href="https://makerworld.com/en/models/376609" rel="nofollow noopener">here</a>.<figure class="image"><a href="https://makerworld.com/en/models/376609" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/718514/2024-03-17_9c74b40b64648.png"></a></figure></td><td style="border:1px solid rgb(230, 77, 77);padding:0.4em;vertical-align:top;width:50%;">I have also developed real Ultrasonic dog whistles at 20,000 Hz and above, which you can find <a target="_blank" href="https://makerworld.com/en/@ThreeDMichael/collections/876023" rel="nofollow noopener">here</a>.<figure class="image"><a href="https://makerworld.com/en/@ThreeDMichael/collections/876023" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/718514/2024-03-17_2788bf9fc9fc9.png"></a></figure></td></tr></tbody></table></figure>&nbsp;This new dog whistle has a frequency of 6200 Hz.&nbsp;Characteristics: - long range, - stable frequency, - handy and robust.&nbsp;I designed more dog whistles … Because individual dogs respond differently to different frequencies, I have created a series of dog whistle designs with different pitches. Try out which whistle best suits your dog. You can find all of my dog whistles <a target="_blank" href="https://makerworld.com/en/u/77030249/collections/122573" rel="nofollow noopener">here</a>.&nbsp;WARNING: This is a dog whistle and not a toy! It's very loud which can harm the ears, so please protect your ears and don't use it near other people or animals!&nbsp;How to print:Use a line width of 0.4 mm and a layer height of 0.2 mm, 6 top layers and 6 bottom layers.The whistle requires correct positioning of the z-seam - it shouldn't be placed in the narrow air passages inside the whistle.It is recommended to use my print profiles with correctly placed z-seam.&nbsp;If you want to check the frequency of this whistle you can use <a target="_blank" href="https://play.google.com/store/apps/details?id=org.intoorbit.spectrum" rel="nofollow noopener">this android app</a>.

Long Range Dog Whistle 6.2 kHz

whistle

Zachary

I was tired of not being able to organize my half-used welding rods when I was finished with them.This helps avoid cross contamination and makes for easy identification of filler metal types.

Filler Rod Holder

welding

Print Doc

Shallow trays and spatulas for mixing epoxy glue.These are printed with tear apart tabs for easy storage. The 12-tray stack fits in a 2x1 unit gridfinity bin.&nbsp;These are designed to be printed on their handles to best utilize space. All the print profiles use “arachne” wall generator. Do NOT use the “classic” wall generator as the thin tear away tabs may not print, the spatulas will fall over and the print will then fail. After slicing you should see little tabs connecting all the trays and spatulas into one unit.&nbsp;If you don&#39;t need the trays you can print the spatulas by themselves:<a target="_blank" href="https://makerworld.com/en/models/491565#profileId-405093" rel="nofollow noopener">https://makerworld.com/en/models/491565#profileId-405093</a>&nbsp;I have also created deeper trays for larger volume. This print has 2 spatulas for each tray as well:<a target="_blank" href="https://makerworld.com/en/models/491688#profileId-405224" rel="nofollow noopener">https://makerworld.com/en/models/491688#profileId-405224</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000491673/design/2024-06-11_31e26d9a3ff3c.png"></figure>

Glue spatulas with trays for epoxy resin

glue and epoxy

PriscoRulez

This is a quick model I made this morning as I had to prepare pizza. It turned out pretty well using basic PETG and smoot PEI plate. Works to scrape pizza dough from the container and to cut it in chunks. Prints in about 1 hour with 100% infill and takes about 28g of filament.

Tarocco - Pizza spatula, scraper and cutter

pizza

user_1055786701

K cup storage box

coffee

Robert Schiele

This is a straightforward tube holder to be attached to some furniture. The standard sizes provided for the tube are for the 18mm outer diameter tube of oxygen tubes like the ResMed SlimLine tube or their mask tubes and the clip to be attached to the furniture is sized for an IKEA headboard. For other dimensions of tubes or furniture, you can parameterize the provided OpenSCAD file.I printed this with PETG and 0.2mm layer height. No supports are needed and there is almost no space left for infill anyway, such that this setting is also totally irrelevant. In fact, I just increased the perimeters to 4 to use perimeter walls throughout the whole object, which in my opinion makes the result look better when printed with transparent filament.Note that if you print this with more stiff filament, like PLA you might want to shorten the clip noses a bit since the clip might otherwise break when you try to attach it to your furniture.This model is technically derived from the more complex design <a href="https://www.printables.com/model/173643" rel="nofollow">https://www.printables.com/model/173643</a> I did before.

tube holder clip

cpap

Ceadd L

A simple nail clipper holder for multiboard&nbsp;Compatible with:<ul><li>Snap fitting <a target="_blank" href="https://www.multiboard.io/parts-library/snaps" rel="nofollow noopener">https://www.multiboard.io/parts-library/snaps</a></li><li>Bolts <a target="_blank" href="https://www.multiboard.io/parts-library/bolts" rel="nofollow noopener">https://www.multiboard.io/parts-library/bolts</a></li></ul>Check out Multiboard <a target="_blank" href="https://www.multiboard.io/" rel="nofollow noopener">https://www.multiboard.io/</a>&nbsp;Made with Shapr3d <a target="_blank" href="https://www.shapr3d.com/" rel="nofollow noopener">https://www.shapr3d.com/</a>&nbsp;Please leave a like and rating, really helps me out!Ceadd <a target="_blank" href="https://ceadd.ca" rel="nofollow noopener">https://ceadd.ca</a>

Multiboard - Nail Clipper Holder

multi board

ArgentP1P

Yet another Ledger Nano holder for your gridfinity desktop. In this case, I had two Nano S but didn&#39;t want to print out two entire squares for it, so I made a model to hold both. Has magnet holes and the stackable lip even though it&#39;s not stackable with ledgers in it.&nbsp;Not sized for Nano X, this is for holding Nano S only. I even squeezed three slots onto one square in case someone out there has three seeds loaded into separate ledgers, but I haven&#39;t tried it - let me know if you do!

Gridfinity 1x1x3 Ledger Nano S holders

Jhos Fuentes

Dyson Supersonic Dryer WallmountSimple and solid wallmount for the Dyson Supersonic

Dyson Supersonic Dryer Wallmount

BEAUTY

chemistinlab

OverviewThis pill organizer is a print-in-place model and does not require additional hardware. Print the lid assembly and the base then follow the instructions below to assemble the model. The lid of the pill organizer has letters for the days of the week, allowing you to organize a week&#39;s worth of pills. This model is great for daily use or traveling.&nbsp;Materials and PrintingMaterials such as PLA or PETG are suitable for this model.<ul><li>2-3 walls</li><li>5% infill</li><li>Support enabled (needed for base)</li></ul>Optional Accessories<ul><li>7 Letters (in main print profile plate, STL of the lid with letters also available for AMS)</li><li>TPU Seal (see print profiles)</li><li>Inserts for additional customization (see print profiles)</li></ul>AssemblyRequired materials<ul><li>Lid</li><li>Base</li><li>Super glue, epoxy, or hot glue</li><li>Cutting tool</li><li>Optional: 7 Letters</li><li>Optional: TPU Seal</li><li>Optional: Inserts</li></ul>Instructions<ol><li>After finishing the print for the Lid, cut the indicated blue brim off the back hinges that were used to increase bed adhesion. <img src="https://makerworld.bblmw.com/makerworld/draft/791928/2024-02-05_61add38c423e6.png"></li><li>Rotate the 3 Lid hinges to break them free. If it is difficult, try warming the part up using warm water to loosen the joint. <img src="https://makerworld.bblmw.com/makerworld/draft/791928/2024-02-05_a339fa7c0bdbc.png"></li><li>Optional: Apply glue in the Lid letter cavity and glue the 7 Letters. <img src="https://makerworld.bblmw.com/makerworld/draft/791928/2024-02-05_167e51f699808.png"></li><li>Optional: Apply glue in the Lid grove and glue the TPU Seal in for an airtight seal. <img src="https://makerworld.bblmw.com/makerworld/draft/791928/2024-02-05_56653d71f88de.png"></li><li>Apply glue in the Base hinge cavity at 2 locations.  <img src="https://makerworld.bblmw.com/makerworld/draft/791928/2024-02-05_d134373b84b02.png"></li><li>Insert the 2 Lid hinge flanges into the Base. <img src="https://makerworld.bblmw.com/makerworld/draft/791928/2024-02-05_e77de9004702a.png"></li><li>Optional: Place inserts<img src="https://makerworld.bblmw.com/makerworld/draft/791928/2024-02-05_0aa382d344725.png"></li><li>All done! <img src="https://makerworld.bblmw.com/makerworld/draft/791928/2024-02-05_0095c75186027.png"></li></ol> Check out other models<figure class="table" style="float:left;width:64.19%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><a target="_blank" href="https://makerworld.com/en/models/139372" rel="nofollow noopener">Stackable Organizing Box</a>Print-in-place organizer</td><td><a target="_blank" href="https://makerworld.com/en/models/173556" rel="nofollow noopener">Pocket Sized Pill Case</a>3 day pill organizer</td></tr><tr><td><figure class="image image_resized" style="width:100%;"><a href="https://makerworld.com/en/models/139372" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/791928/2024-01-18_72df22399101e.jpg"></a></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/173556" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/791928/2024-02-05_099a37b7e6dd1.png"></a></figure></td></tr><tr><td><a target="_blank" href="https://makerworld.com/en/models/151560" rel="nofollow noopener">Lover Rover Kit</a>Valentines Mars rover</td><td><a target="_blank" href="https://makerworld.com/en/models/395814" rel="nofollow noopener">4 Way PTFE Splitter Adapter</a>AMS and external spool adapter</td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/151560" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/791928/2024-01-27_5faf2abe4ea02.jpg"></a></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/395814" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/791928/2024-03-25_898eeadc41d8d.png"></a></figure></td></tr></tbody></table></figure>&nbsp;

Pill Shape Organizer (Customizable)

organize

raj-3d

Printed with Overture matte white PLA, 0.4 nozzle, at 205°C and 0.2mm layer height, no supports needed. Print orientation is like in the 3rd image.AI description: 3D Printed Dog FeederThe 3D Printed Dog Feeder is the perfect solution for dog owners who want to keep their bowls organized in one place. The holder provides space for 2 bowls, so you can offer your dog water and food without the bowls getting mixed up. The holder is made of durable and long-lasting material, so it will last long and provide your dog with a comfortable eating and drinking experience. The holder is easy to assemble and can be placed anywhere you want. Its modern and stylish design will fit any room and decor.Overall, the 3D Printed Dog Feeder is a practical and attractive addition for any household with dogs. It's a simple and effective way to keep your dog's bowls in one place and at the same time, have a stylish and modern accessory in your home.😉&nbsp;

dog bowl rack

dogs

Lappari

Simple tray for armrest in couple of different sizes. Id suggest to make a ~2cm tall test to see how it fits since ive made this according to my couch profile.

Couch armrest tray

trays

pixelwave

A detachable bottle and smartphone mount for a 25mm pole (+/- 3mm). The chair mount I printed in Prusament PETG, the bottle holder in Prusament PLA.&nbsp;Additionally the design uses:6x M5x16 mm Screws + M5 Nuts2x Rubber Bands (optional to place inside the clamp groves)&nbsp;I also attached the Fusion 360 File for further modifications. Please link if you upload modifications! :)&nbsp;@UPDATES:221014 - V5<ul><li>added a large version (fits 10cm 1,5L bottles) Bottle Holder V3 - 10cm</li><li>old size still available Bottle Holder V3 - 8.8cm</li><li>changed alignment of holes for easier print</li></ul>220822 - V4<ul><li>Updated Bottle Holder V2 with two compartments and symetric mounting option</li></ul>220523 - V3<ul><li>Changed tolerance of mount (-0.1mm)</li><li>Rounded Corners for better insertion</li></ul>220522 - V2<ul><li>Changed tolerance of mount (-0.2mm)</li></ul>_______If you like my uploads buy me a coffee -> <a href="https://bit.ly/pwave-donate" rel="nofollow">https://bit.ly/pwave-donate</a>

Fishing Chair Bottle & Smartphone Mount (Carp On)

drink holders

Waikikiprod

labels for IKEA Hallbar bins series.Printable in one or two colors.Practical for differentiating your binsAll you need is a double-sided tape to stick them in the area provided for this purposeMany versions available. Possibility to create new ones on request ;)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-08-15_2cen33u7izz1.jpg"></figure>Follow me on<a target="_blank" href="https://www.instagram.com/waikikiprod/" rel="nofollow noopener"> Instagram</a> / <a target="_blank" href="https://www.tiktok.com/@waikikiprod" rel="nofollow noopener">TikTok</a> / <a target="_blank" href="https://www.facebook.com/waikikiprod" rel="nofollow noopener">Facebook</a> / <a target="_blank" href="https://beacons.ai/waikikiprod" rel="nofollow noopener">Beacons </a>Discover My Best 3D Models<figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/fr/models/14009?profileId=13993" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_49db957f2d46d.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/14009?profileId=13993" rel="nofollow noopener">X1C Keychain</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13847?profileId=13645" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_03b57abb0262f.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13847?profileId=13645" rel="nofollow noopener">Axe Magnet</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13841?profileId=13635" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_d454006b5cde4.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13841?profileId=13635" rel="nofollow noopener">Tank toy - Print in place</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/fr/models/13159?profileId=13163" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_ec02bcb1e833b.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13159?profileId=13163" rel="nofollow noopener">Foaming Soap Dish</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13723?profileId=13450" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_e177dc4e45a09.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13723?profileId=13450" rel="nofollow noopener">The console of your childhood</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13846?profileId=13640" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_2d9999d3ea301.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13846?profileId=13640" rel="nofollow noopener">The Ultimate Fidget Avocado Keychain</a></td></tr></tbody></table></figure>

Labels for Ikea HallBar

Label

This little sorting box is handy for everything on your table. I designed it as a helper for small things like screws.The box is 18 cm x 9.9 cm in total.

led

gridfinity

magnets

household

cigar

dji

clips

fishing

edc

survival

sd card

wrench

Bin

Cake

hand

drawing

ruler

RV Trailer

holders

ryobi

walls

painting

clamps

flange

planter

samurai

pills

military

3d printing

modular storage

art

trash cans

silica box

Ryobi

dewalt

packout

crypto

crochet and sewing

whistle

welding

glue and epoxy

pizza

coffee

cpap

multi board

gridfinity

BEAUTY

organize

dogs

trays

drink holders

Label

sorter

games

measuring

jars

skull

vase

lids

signs

hooks

pest control

caddy

cricut

stands

gopro

gopro

fishing

mounts

bambu

tools

car

woodworking

laundry

scoops

kitchen

garage

socket

coffee

lamp