mikann

Meister Edel

Update 10.02.2023:I remixed the rotor with the toroidal design :) Feel free to test ist out!<a target="_blank" href="https://makerworld.com/de/models/54749#profileId-56494" rel="nofollow noopener">https://makerworld.com/de/models/54749#profileId-56494</a>In addition, there are now many other great remixed propellers from other users. You can find them connected to this print or my toroidal propeller.<figure class="image image_resized image-style-align-center" style="width:65.71%;"><img src="https://makerworld.bblmw.com/makerworld/draft/353748/2023-11-10_2d7kbimuo75c.jpg"></figure>&nbsp;HiRecently my son came home very sad because a friend had such a fancy flying propeller from the 1€ shop.Of course I had to sit down directly at the computer and after the first prototype was already well working I designed an improved version.This toy should be very stable and last a long time! Also, it's very easy to use and grab for the smaller ones among us!Put the pulling rod in the place marked by the arrows. Otherwise the propeller wants to fly downwards. Have fun! :) Note: The prop will fly long distances/ very high. So better use it in a place without trees and no obstacles. Hold the Toy away from the face! - otherwise the propeller will fly into it :D&nbsp;Print instructions/ tipps:<ul><li>Axis: Print the axis with at least 3-4 perimeters!</li><li>Propeller: Print the propeller with a not too brittle material! (I used tough PLA or even better: Nylon + Carbon Filament) - Low infill: The lighter the better ,-) I also tried TPU. It works but if you pull too hard it may deform too much and cause a malfunction. The lower you choose the layer hight the less friction the prop will cause. (I printed in 0,15mm)</li><li>Gear & Bearings: Use filament that can withstand kinda low tolerances. PLA will do the job. If you have a seam cut it off after printing. To avoid a bad surface dont "fill the gaps".</li><li>Pulling rod: Print the Classic+ Rod with 3 Perimeter.</li><li>It is possible to separate the file into parts with your slicer ,)</li><li>I also like to break the corners of all parts by scraping over these areas with a knife. That makes the action smooth and gives a good handfeel :)</li><li>Power of Scaling: If you have difficulties inserting the axis you may reprint it scaled down a little. If it is too loose scale it up a little so it fits tight enough.</li><li>It is not necessary but I lubricated all mechanical pieces with some paraffin wax. A drop of Oil will do the job too but may be messy.</li><li>You can print all parts without support and put the parts together very easy.</li></ul>Attention: Don't use damaged Propeller!! A disbalance in the Rotation might destroy the Propeller and parts could fly Off. Especially with brital Material Like PLA.  New Mechanics Update: This is the right way to assemble the toy!<figure class="media"><div data-oembed-url="https://youtu.be/0pYzTrsRqqw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/0pYzTrsRqqw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Since the design optimazion of the internal mechanics there is no glue needed at all!  &nbsp;I have also provided other beautiful designs for kids for free. For example, my latest is the ocarina to make music!<a target="_blank" href="https://makerworld.com/de/models/54693#profileId-58010" rel="nofollow noopener">https://makerworld.com/de/models/54693#profileId-58010</a>&nbsp;<figure class="image image_resized image-style-align-center" style="width:74.14%;"><img src="https://makerworld.bblmw.com/makerworld/draft/353748/2023-11-10_2xl9blerr9l5.jpg"></figure>&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=WfEfctJU70o"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/WfEfctJU70o" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;&nbsp;To get the most strength out of the pulling rods locate the seam to this location: (It is possible with the Prusa Slicer for example)<figure class="image image_resized" style="width:61.62%;"><img src="https://makerworld.bblmw.com/makerworld/draft/353748/2023-11-10_yj4redoaa581.png"></figure>&nbsp;Remix CultureI think this simple design is very open for you to bring in your designs too! So be invited to create even better propellers! (I uploaded the .step file of the core piece. [mm])&nbsp;<figure class="image image_resized image-style-align-center" style="width:66.54%;"><img src="https://makerworld.bblmw.com/makerworld/draft/353748/2023-11-10_sxifu6dn5if0.jpg"></figure>&nbsp;&nbsp;&nbsp;Update 06.07.2022Added a new (hopefully) more aerodynamik prop. This one flies even higher!(Added in standard download & single)Update 28.05.2023Increased the strength of the prop a little by adding a radius connecting the wings with the outer ring.Update 23.02.2023: NEW PULLING RODS! Some had proplems with a breaking pulling Rod. So I beefed up the old one (Classic+) and also designed 2 totaly new ones (Ergonomic & Hook). For the Ergonomic one you will need a M3 x 20+ Screw for assembling. I tested all with PLA in the local kindergarten and they withstand even rough abuse :PUpdate 27.09.2023: Due to different manufacturing tolerances the press fit does not always work directly (scaling the axle can work wonders) I have slightly reworked the inner mechanics. I'm happy about any short feedback on the new design!&nbsp;&nbsp;If you like my work I would be very happy if you share it with others and leave a like :)

Strong Flying Propeller / Pull Copter (No Supports)

好玩儿的

Bambu Lab

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013717/design/2023-09-19_9f3e533f94456.jpg"></figure>This LED lamp project offers two types of 3D-printed lamps. Type A features a hollowed-out and angular design, while Type B showcases textured and wavy patterns. To achieve the best lighting and shadow effects while maintaining a balance between translucency and light guidance, we have carefully selected suitable LED light sources and recommend using Bambu PLA Basic Jade White filament for this project.&nbsp;Recommended filaments: Bambu PLA Basic Jade White<a target="_blank" href="https://store.bambulab.com/products/pla-basic-filament?variant=40820833517683" rel="nofollow noopener">https://store.bambulab.com/products/pla-basic-filament?variant=40820833517683</a>Hardware Kit: LED Lamp Kit-001<a target="_blank" href="http://store.bambulab.com/products/led-lamp-kit-001" rel="nofollow noopener">http://store.bambulab.com/products/led-lamp-kit-001</a>&nbsp;Please make sure you clean the build plate before printing and/or applying glue to prevent print failures.&nbsp;Follow the Assembly Guide below step by step to print and assemble your build. Refer to the Design Guide for further design and quality enhancement.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013717/design/2023-09-15_31832bf687dbb.png"></figure>

LED Lamp 001

官方

南北时光

对于想4个颜色打印的伙伴，建议打印多个，打印一个出现瑕疵的概率会增加，并且打印的时间会很长，多个打印时间也并不会增加太多，所以性价比会更高。并且腹部可以尝试加一个支撑，来获得更好的腹部质量。感谢@user_302746402 的建议和反馈For friends who want to print in four colors, I suggest printing multiple copies. The probability of defects increases when printing just one, and the printing time is long. Printing multiple copies won&#39;t significantly increase the time. Additionally, consider adding support to the abdomen for better quality. Thanks to @user_302746402 for the suggestion and feedback! -----------&nbsp;这是抽空做的一个小柴犬的站立姿态模型，想法就是做一只看着就很开心的小柴犬，在这充满压力的每一天里看到小狗会让你紧绷的心情稍微放松些。我打印的版本是有些瑕疵的，比如耳朵和嘴巴。在上传的文件里把这里修复了，只是我就没有再次打印了，等什么时候机器有空再打印一堆小模型。具体说明在 站姿说明.jpg 图片中。在打印的过程当中最开始是打算开起支撑的，我比较担心肚子那会有问题，然而在打印的过程当中却忘记选择这个选项，结果还都成功打印了出来，蛮开心的。 脸部侧面偏下应该悬垂面太大，有些堆积，我不确定是否更改参数或者能修改模型的伙伴能自己调整一下，效果应该会更改好些。另外还上传了一个坐下姿态的小狗狗，可以去看看，感谢您的喜欢！^ ^ This is a standing posture model of a Shiba Inu that I made in my spare time. The idea is to create a Shiba Inu that looks very happy. Seeing a little dog in this pressure-filled day will help relax your tense mood a little.The version I printed has some flaws, such as the ears and mouth. I have made the repairs in the uploaded file, but I have not printed it again. I will print a bunch of small models when the machine is available. The specific instructions are in the &#34;Standing Posture Instructions.jpg&#34; image.At the beginning of the printing process, I initially intended to use supports because I was concerned about potential issues with the belly. However, I forgot to select this option during the printing process, but the results still turned out to be successful, which made me quite happy.The hanging surface of the lower face on the side profile should be reduced, and there is some accumulation. I am not sure whether changing parameters or manually adjusting the model can fix it. The effect should be improved as a result.I have also uploaded a sitting posture model of a little dog. You can have a look at it. Thank you for understanding and liking it! ^_^

卡通小狗  柴犬  站立 |  Cartoon small dog Shiba Inu

好看的

CoNcLuZiOn

Kitchen cabinet handle. Check dimensions on picture to see if its fit your needs. Check also my other creations:<a target="_blank" href="https://makerworld.com/sk/models/85740#profileId-91657" rel="nofollow noopener">Alphabet puzzle letter tiles</a><a target="_blank" href="https://makerworld.com/sk/models/84597#profileId-90439" rel="nofollow noopener">Alphabet</a><a target="_blank" href="https://makerworld.com/sk/models/83939#profileId-89725" rel="nofollow noopener">Numbers 0-9</a><a target="_blank" href="https://makerworld.com/sk/models/83894#profileId-89681" rel="nofollow noopener">Party mustache</a><a target="_blank" href="https://makerworld.com/sk/models/83122#profileId-88667" rel="nofollow noopener">Christmas tree ornaments</a><a target="_blank" href="https://makerworld.com/sk/models/85616#profileId-91515" rel="nofollow noopener">Braille Alphabet letters tiles</a><a target="_blank" href="https://makerworld.com/sk/models/86533#profileId-92758" rel="nofollow noopener">Earrings</a><a target="_blank" href="https://makerworld.com/sk/models/87591#profileId-93720" rel="nofollow noopener">Earrings zodiac signs</a><a target="_blank" href="https://makerworld.com/sk/models/89559#profileId-95855" rel="nofollow noopener">Spaghetti measuring tool</a><a target="_blank" href="https://makerworld.com/sk/models/89598#profileId-95902" rel="nofollow noopener">Herb stripper tool</a><a target="_blank" href="https://makerworld.com/sk/models/89723#profileId-96046" rel="nofollow noopener">Simple bag clip</a><a target="_blank" href="https://makerworld.com/sk/models/90782#profileId-97140" rel="nofollow noopener">Cheese tray</a><a target="_blank" href="https://makerworld.com/sk/models/90784#profileId-97143" rel="nofollow noopener">Tongs from forks</a><a target="_blank" href="https://makerworld.com/sk/models/91261#profileId-97589" rel="nofollow noopener">Post-it notes + pens tray</a><a target="_blank" href="https://makerworld.com/sk/models/91688#profileId-98033" rel="nofollow noopener">Simple bag clip v2</a><a target="_blank" href="https://makerworld.com/sk/models/91715#profileId-98069" rel="nofollow noopener">Phone stand</a><a target="_blank" href="https://makerworld.com/sk/models/91813#profileId-98218" rel="nofollow noopener">Simple funnel</a><a target="_blank" href="https://makerworld.com/sk/models/91931#profileId-98325" rel="nofollow noopener">Spoon / kitchen tools holder</a><a target="_blank" href="https://makerworld.com/sk/models/92864#profileId-99322" rel="nofollow noopener">Keycap remover</a>Thank you&nbsp;

好玩儿的

官方

好看的

实用工具