iTruth

dunnoz

Not my model.&nbsp;I just made some edits to include a logo since the original didn't have it.

Game Boy Color Box case with logo

Gameboy

calebholloway08

raspberry pi case for raspberry pi 3 model A+.&nbsp;there are two models. one with a solid top case, and one with two parts (needs support)DIRECTIONS:print the base, and then either the single-part top, or dual-part top&nbsp;the holes on the bottom are for 3x6mm magnets. the parts should fit together but if you want you can use M3 screws to hold it together

Raspberry Pi 3 A+ Case

Raspberry

Llλmbda

Edit: 1/28/2024 - Added secondary version of base to better show off model. Added extra details on top I didnt notice at first. Moved secondary base to its own build plate so users printing from app can choose which they want Edit: 1/26/2024 - Rescaled slightly to be more in game accurate, thickened walls slightly, added pegs so it can stay shut without glue, added base for it to sit on. Pins can be replaced with tint 2mm magnets as well Palworld Palsphere model! Print outer and inner with translucent blue and add lights inside for a cool effect!

Palworld Palsphere

Palworld

PaulBB

<h4>Update 1 - 17th October 2023:</h4>Thanks for the feedback and the great prints everybody! :) As expected some printers have troubles with connecting two stacks together, especially when they are not calibrated enough. I added a small chamber + fillet on the pins to allow the pins to slide in more easily. Just push it in as far as it goes until it sits tight. Leave a gap if it does not go all the way in to avoid breaking the holder or sand the pins down. Please let me know if that works! As the time of writing only my print profile has the updated version, but as the Bambu Lab printers are very well calibrated out of the box you should not have a problem with it.&nbsp;Other then that I just cleaned up the bottom of the holder a bit. Nothing changed for the top part and the clip. They are still compatible. I maybe will redesign the pin completly to a kind of snap-clip version. I also had the idea to add a double-width version.&nbsp;<h3>Stackable Bottle Holder</h3>A stackable bottle holder to store your bottles of all kind nicely on top of each other. This way you save space in your cabinet, shelf or even your fridge. The dimensions of one base element are 88.2mm x 88.2mm x 200mm (Width x Height x Length). Bottles for a diameter of up to 85mm are supported, which should basically fit every normal bottle. It even fits wine bottles quite nicely, wheras I would not recommend to stack more then two, as they get quite heavy then. (Do that at your own risk, or if you are using a really strong material, as the walls supporting the whole thing are only 1.6mm wide!)There is also a clip to connect two “towers” with each other.<h3>Print settings</h3>I used 3 walls, 15% infill with 0.2mm layer height and it printed fine. You may have to increase the top layers, infill or layer height depending on your printers capabilities to get the “bed” for the bottle right, as this is very prone to <a target="_blank" href="https://all3dp.com/2/3d-printing-top-layer-problems-easy-fixes-for-pillowing/" rel="nofollow noopener">pillowing</a>. The top part also has pretty steep overhangs, you may want to increase the layer height there or even add supports. <h3>Installation</h3>Just stack the elements on top of each other. The holes should fit exactly as long you do not print each element in a different material type (PLA, PETG, etc.)The clip to connect two towers goes on one of the main supports. I found the middle one the best for this as it is not visible there afterwards.

Stackable Bottle Holder

Kitchen

IXPatch

To celebrate the 7th anniversary of Pokémon GO, I decided to make a little PokéStop spinner keychain :) It prints in place with no supports or assembly required.

PokéStop Spinner Keychain - Pokémon GO (print-in-place)

Pokemon

Dr.Mussy

<div><h1>Summary</h1><div>Whether you're working on your training or just making some holsters here is the G19 frame, of course it's non functional but the trigger, slide and mag catch still move.BOM: (Bill Of Material)1.5 mm OD x 38mm L x music wire (Mag catch) 10 mm OD compression spring x 100mm L (slide) 6mm OD x 90mm L Rod (lower frame) 2 mm OD x 25 mm L Rod (Trigger) 5mm OD x 12mm L compression spring (behind the trigger)Mag catch spring: <a href="https://www.amazon.de/Auto-Achse-lang-Durchmesser-Edelstahl-St%C3%BCck/dp/B00JR5BTXQ/ref=sr_1_6" rel="nofollow">https://www.amazon.de/Auto-Achse-lang-Durchmesser-Edelstahl-St%C3%BCck/dp/B00JR5BTXQ/ref=sr_1_6</a>?Recoil & Trigger Springs: <a href="https://www.amazon.de/Verschiedene-Erweiterung-Aufbewahrungsbox-Handwerkzeuge-Ersatzteile/dp/B097PZT2CY/ref=sr_1_5" rel="nofollow">https://www.amazon.de/Verschiedene-Erweiterung-Aufbewahrungsbox-Handwerkzeuge-Ersatzteile/dp/B097PZT2CY/ref=sr_1_5</a>?Trigger Axle: <a href="https://www.amazon.de/sourcing-map-Vollrundstab-Edelstahl-Heimwerker/dp/B083DXD9QT/ref=sr_1_10" rel="nofollow">https://www.amazon.de/sourcing-map-Vollrundstab-Edelstahl-Heimwerker/dp/B083DXD9QT/ref=sr_1_10</a>?If you are interested in other prop firearms, Airsoft parts and designs do join our group on Matrix: <a href="https://app.element.io/?pk_vid=f12152aac29bbc4a166549437941781a#/room/%23GCI-General:matrix.org" rel="nofollow">https://app.element.io/?pk_vid=f12152aac29bbc4a166549437941781a#/room/#GCI-General:matrix.org</a>!!!Note: I'm always open for suggestion and help on improving the design and proof of concept.!Don't forget to hit the LIKE! & check out my other Cool designs & Follow my Weekly dose of KooKoo uploads ;)</div></div>

Blue Training Pistol G19

Prop

HUSQY_

Created these as a simple way to mount the Minibar to the wall as a nice feature in my office.Printed in PLA+ 20% Infill No supports required&nbsp;Polybar & Minibar models found here: <a href="https://www.printables.com/model/277183-polybar-project-music-game-controllers" rel="nofollow">https://www.printables.com/model/277183-polybar-project-music-game-controllers</a>More about the Polybar project can be found here: <a href="https://github.com/roadsidebomb/Polybar-Minibar-3D-Print-Files" rel="nofollow">https://github.com/roadsidebomb/Polybar-Minibar-3D-Print-Files</a>

Minibar Game Controller Wall Mount

Minibar

digitallyforgeddesigns

Update (1/28/2024) V2 design now has a screw in type pommel.&nbsp;Here it is! The first vampiric collapsing sword brought to you by Digitally Forged Designs (DFD). Have a great time playing with this cool item that you can 3D print yourself.

Vampiric Collapsing Sword

Swords

Daryl Bateman

A stand for graded pokemon cards great little stand to display your dominence &nbsp;0.2 layer height or better for more detail10% infill (gyroid)

Graded Pokemon Trading Card Holder/Display

Comics

chiz_m

If you like to show appreciation for the effort that went into creating this model, pls hit that BOOST button!&nbsp;A <a target="_blank" href="https://makerworld.com/en/models/18035#profileId-16764" rel="nofollow noopener">base/diorama builder</a> is now available for download for this mini figure model!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000018045/design/4fb50df1-8c36-4d0c-88ec-bcc8e5122b9c.jpg"></figure>___________<h3>IMPORTANT NOTE ON COMMERCIAL USE OF MY MODELS</h3>Please note that I am sharing my designs to any one to enjoy but for personal use only. I have NOT provided any commercial license to any one allowing the sale of 3d printed copies of my designs. Seeing my designs being sold for profit is discouraging for me to continue coming up with more designs. I will not hesitate to report to Etsy and other online sites if I find them being sold.__________This is a kit card of Minecraft Turtle in mini figure scale. Parts can easily be removed from the sprue without using cutters/clippers just by twisting the part.Default scale is comparable to the Minecraft mini figures but of course you can scale it up to as large as you want! :)<h4>Usage Options</h4><ol><li>Assemble as is and use as toy/collectible; or</li><li>Use the alternative part with loop and glue the halves together to make for a great keychain ornament!</li></ol><h4>Printing Reminders</h4><ul><li>Print as oriented, with NO supports needed.</li><li>If you&#39;re printing in multiple colors, please note that due to several color swaps, it would take longer to print.</li></ul><h4>Difficulty Level (Easy, Medium, Hard)</h4><ul><li>Printing: Medium - Bed should be leveled well to ensure small parts stick well to the build plate. Requires printing slower during the first few layers. May require lots of filament swaps if printed in multi-color.</li><li>Assembly: Easy - Parts should fit really easy. The flippers are intentionally designed to be loose and wiggly. See pictures for correct orientation of the flippers.</li></ul>

Minecraft-inspired Turtle Mini Figure Kit/Keychain

Kit Cards

Hobson318

Made this for a buddy of mine. All done in tinkercad. The silver sections are raised up so it is ready for a color change at 4.2mm.<h3>Print instructions</h3>No specific instructions. Color change at 4.2mm.

Raiders Coaster Set

Gifts

This is a remix of this: <a href="https://www.thingiverse.com/thing:3388702" rel="nofollow">https://www.thingiverse.com/thing:3388702</a> / https://www.printables.com/model/190721-shape-tray-toy-for-babyI made this for my yet to be born grandson. I thought the original was a bit too thick for my taste. Shaved about 8mm off of it. I also added grooves on the bottom on both sides to give a place to grip. I used the following PLA filaments:Cross = Tianse Green Hexagon = Tianse Purple Triangle = Amazon Basics White Square and Star = AMZ3D Red Pentagon = Prusa Galaxy Black Slice = Prusa Galaxy Silver Circle and Oval = Maroon from Prusa but is not Prusament Base = Amazon Basics BlueHilbert Curve top pattern. I did get a small amount of lift in bottom right corner unfortunately. But all in all turned out well.<h3>Print instructions</h3>I only used supports under the tray where the grooves are.Edit: Added the link to the original here on Printables as I just realized it was here also. Appologies to Phaedrux for not doing this sooner.

Baby Shape Toy

Baby G

makersark3d

Dragon scale xbox one controller mod

Xbox one controller Dragonscale mod

Gaming

Fixumdude

Cover your can with this Franken-Stein Can Coozie with flip top to protect your drink from angry villagers!&nbsp;Franken-Stein Can Coozie with flip top.&nbsp;Recommend at least 3 walls to make sure the top pegs can snap into the handle without breaking.If your printer can't do large bridges then a little support on the underside of the top part of the handle is recommended.&nbsp;Single color Example printed in Extrude Signal Green PLA on the Bambu X1 Carbon at 0.24 layer height, 3 walls, 3 top and bottom layers, and 10% grid infill. Prints in about 5 ½ hours.&nbsp;Four color example printed in: Filament 1 - Hatchbox White PLA Filament 2 - PolyMaker Silk Chrome PLA Filament 3 - PolyMaker PolyTerra Pastel Mint PLA Filament 4 - Hatchbox Black PLA &nbsp;Printed on the Bambu X1 Carbon at 0.24 layer height, 3 walls, 3 top and bottom layers, and 10% grid infill and limited tree supports.

Franken-Stein Flip Top Can Coozie

Random

berri3D

This card kit makes a customizable Halloween haunted house diorama. The trees, pumpkins, ghosts, and tombstones are all interchangeable. Mix and match to make your own creation!<ul><li>Great for party favours; print in different colours and swap with friends!</li><li>Multi-colour ready</li><li>Separate (not attached to a card) pieces are also included in the .3mf</li></ul><h3>Trouble? Questions? Comments? Please don't hesitate to get in touch</h3><h3>Happy Halloween and Happy Printing!</h3><h3>Tolerances and fit</h3>All pieces should fit snugly. The smaller pieces are a bit fiddly due to their size. I recommend assembling with the smallest pieces first, followed by the gate, the tree(s), and, finally, the house.&nbsp;IMPORTANT: print the tolerance test first. Minor differences in filament flow can mean the difference between fitting and not fitting. This test is comprised of three pieces from the model as this is the most accurate way to gauge how well it will fit. <ul><li>Too tight? Change the X-Y hole compensation setting to 0.05 mm and reprint. Adjust up or down as needed.<img src="https://makerworld.bblmw.com/makerworld/draft/545096/2023-10-25_10a1e251c2ff9.png"></li><li>Too loose? Change the X-Y hole compensation setting to -0.05 mm and reprint. Adjust up or down as needed.<img src="https://makerworld.bblmw.com/makerworld/draft/545096/2023-10-25_8e82d3e6d8716.png"></li></ul><h3>Print Settings</h3>The .3mf files include my recommended print settings:<ul><li>Nozzle size: 0.4 mm (don't change as it may prevent pieces from fitting together)</li><li>Plate type: Smooth PEI Plate/High Temp Plate (best results)</li><li>Layer height: 0.2 mm (don't change as it may prevent pieces from fitting together)</li><li>First layer speed: 15 mm/s (slow to prevent small details from coming loose from the plate)</li><li>Wall order: outer/inner (for the same reason as above)</li><li>Wall generator: Classic (don't use Arachne because it will throw off the tolerances)</li><li>Brim: none</li></ul><h3>Filament settings</h3><ul><li>This model has been tested using the default uncalibrated “Generic PLA” preset with multiple filaments from various manufacturers. </li><li>If you find that the top surfaces are rough, reduce filament flow ratio. Caution: this may change fit so reprint the tolerance test first.</li><li>If you're using a custom filament preset, your results may vary.</li><li>Display models were printed in PLA as follows: Orange (Eryone), Grey (Eryone), Purple (AMZ3D), and Black (AMZ3D).</li></ul><h3>Multicolour</h3><ul><li>The model is AMS multicolour ready and provided pre-painted.</li><li>If you prefer to paint it yourself, I recommend leaving the first layer as one colour as it will help with adhesion. However, each bottom surface is isolated and paintable if you should so choose.</li><li>DON'T print your multicolour masterpiece without first printing the tolerance test!</li><li>Print four at a time to reduce filament waste (X1C and P1P/S only; A1 mini can only fit one)</li></ul><h3>About the model</h3>I've always enjoyed card kits and thought it would be fun to design my own to hand out at Halloween to trick or treaters. As with most things I create, it became more complicated as I went on and I lost the original intent of being an all-ages kit. However, I did wind up with what I think is a fun miniature diorama that older kids and adults might enjoy. If this kit is well received, I may design diorama kits for other holidays. Let me know what you think!&nbsp;P.S. I'm working on a simpler kit for younger users; I will update this when it's published. Update: done! Find it <a target="_blank" href="https://makerworld.com/en/models/52381#profileId-54144" rel="nofollow noopener">here</a>.<h3>Licensing</h3>This kit is non-commercial and may not be sold, reproduced, or shared outside of this website. However, I will consider an individual license fee if you wish to sell printed models in your local area such as at a craft show. Please contact me for details.------------------------<h3>Changelog</h3>January 8, 2024<ul><li>Updated description to align with changed MakerWorld TOC</li></ul>October 24, 2023<ul><li>Initial upload</li></ul>October 25, 2023<ul><li>Added print profiles for A1 mini</li><li>Removed multiple plates for solid and multicolour profiles to give a better estimate of individual model print times and filament usage.</li><li>Changed XY contour compensation to XY hole compensation</li></ul>October 29, 2023<ul><li>Added link to Trick or Treat House card kit</li></ul>

Halloween House Diorama Card Kit

Holidays

squinn

A must-have drill accessory tool that both allows you to make sure you drill a perfectly perpendicular hole while also capturing all of the dust and debris. The front of the tool rotates so that you can select the guide hole that will best work for your drill bit, and then the cover on the back can be easily removed with a twist to dump the debris when you're done. A protruded pointer is included on the top of the piece to help with alignment.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/163361/2023-11-11_s7cilgno7l35.gif"></figure>This model has been designed so that no supports or brim are required, and the STLs are oriented as they should be on the print bed. Post print, the front and middle piece can be simply snapped together, so no glue or other hardware is required. I printed all three pieces of the one shown in the pictures in PLA, but TPU would likely work really well for the bottom “cover” piece if you have it.

Drill Guide and Dust Catcher

Tools

k2thestank

Easy to print and even more fun to play!&nbsp;Suggested Print settings:<ul><li>White and Blue PLA</li><li>45-75mm/s outside walls</li><li>4 or 5 Top/Bottom layers</li><li>3 walls</li><li>10% infill</li><li>No supports Required (we built them in for you)</li></ul>print everything face down or use your pre setup file for easier printing!&nbsp;I added a simple 8 Sided Die to the print files i recommend printing it at 0.1mm if you dont already have one&nbsp;

Penquin Peril

Games

Jaatinen3D

Fun fidget toy you can spin around your fingers making tricks and impressing your imaginary friend! Print a chain of appropriate length (I&#39;m using length 14, it feels nice) and attach the Ring and End to the chain. Ready to spin!&nbsp;Prints nicely without supports!&nbsp;---Check out the new <a target="_blank" href="https://makerworld.com/en/models/151261" rel="nofollow noopener">Ringchaku Wall Hook</a> to display and store your Ringchaku!---&nbsp;---Update 2024-19-01: I&#39;ve added three smaller versions of the ring: 22mm, 20mm and 18mm. Let me know if you need even smaller!---&nbsp;<figure class="media"></figure>&nbsp;<h3>Check out the special editions too:</h3><figure class="table" style="width: 100%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000068477/design/2024-01-22_5e3d7929a825c.jpg"></figure></td><td>Valentine&#39;s Day Edition NEW! FREE!</td><td><a target="_blank" href="https://makerworld.com/en/models/152374" rel="nofollow noopener">MakerWorld</a></td></tr><tr><td style="padding: 0px"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000068477/design/2024-01-19_491754b41e8de.jpg"></figure></td><td>Thanksgiving Edition</td><td><a target="_blank" href="https://than.gs/m/964381" rel="nofollow noopener">Thangs</a> / <a target="_blank" href="https://cults3d.com/:1629286" rel="nofollow noopener">Cults</a></td></tr><tr><td style="padding: 0px"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000068477/design/2024-01-19_91dffdceaa6a6.jpg"></figure></td><td>Mace Edition</td><td><a target="_blank" href="https://than.gs/m/969867" rel="nofollow noopener">Thangs</a> / <a target="_blank" href="https://cults3d.com/:1629291" rel="nofollow noopener">Cults</a></td></tr><tr><td style="padding: 0px"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000068477/design/2024-01-19_be36c48d89bf9.jpg"></figure></td><td>Blade Edition</td><td><a target="_blank" href="https://than.gs/m/973197" rel="nofollow noopener">Thangs</a> / <a target="_blank" href="https://cults3d.com/:1631360" rel="nofollow noopener">Cults</a></td></tr><tr><td style="padding: 0px"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000068477/design/2024-01-19_ab638babd38a6.jpg"></figure></td><td>Christmas Edition</td><td><a target="_blank" href="https://than.gs/m/975683" rel="nofollow noopener">Thangs </a>/ <a target="_blank" href="https://cults3d.com/:1648164" rel="nofollow noopener">Cults</a></td></tr><tr><td style="padding: 0px"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000068477/design/2024-01-19_a4dc599028daf.jpg"></figure></td><td>Kusarigama Edition NEW!</td><td><a target="_blank" href="https://than.gs/m/992237" rel="nofollow noopener">Thangs</a> / <a target="_blank" href="https://cults3d.com/:1711103" rel="nofollow noopener">Cults</a></td></tr></tbody></table></figure>&nbsp;Don&#39;t forget to check out my Instagram and YouTube channel for more interesting projects!<a target="_blank" href="https://www.instagram.com/jaatinen3d" rel="nofollow noopener">https://www.instagram.com/jaatinen3d</a><a target="_blank" href="https://www.youtube.com/@Jaatinen3D" rel="nofollow noopener">https://www.youtube.com/@Jaatinen3D</a>

Ringchaku Spinning Fidget Toy

Toys

SavageLau

<h3>If you want commercial license, check out my bio and get it from Patreon.</h3>&nbsp;<h3>I am here to introduce you, retractable wand! I think it will be a great addition Ornaments for Christmas and in coming holiday season. Bring some magic and best wishes to you all! Have fun, and happy holiday.</h3>&nbsp;It has a wood looking base, and all the components retracting smoothly from the base. It is very simple to printing and reletively fast. total of 58g of filaments and 2h30m printing time. No support needed.&nbsp;<figure class="image image_resized image-style-align-center" style="width:59.27%;"><img src="https://media.printables.com/media/prints/652871/rich_content/764fe838-ba4c-4c36-8496-b0362f3c071e/image.png#%7B%22uuid%22%3A%2204aceb04-518d-4fb3-ab7a-08e22df52c94%22%2C%22w%22%3A828%2C%22h%22%3A575%7D"></figure>&nbsp;&nbsp;<h3>If you like other wand design:</h3>Dragon wand:<a target="_blank" href="https://makerworld.com/en/models/135043#profileId-146518" rel="nofollow noopener">https://makerworld.com/en/models/135043#profileId-146518</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413419/2024-01-16_dbbeb456e4a18.jpg"></figure>&nbsp;Loong wand:<a target="_blank" href="https://makerworld.com/en/models/143028#profileId-155486" rel="nofollow noopener">https://makerworld.com/en/models/143028#profileId-155486</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413419/2024-01-16_c35147a62934a.jpg"></figure>&nbsp;&nbsp;<h2>Update: Revision v1.7, update later. I need to go to sleep. :)</h2>Improved some detail finish out exterior.Improved interlocking mechanism. This is reversion v1.5 I made many test print - revise -test print - continuous improvement process, there are many hours of work behind the scenes to make this model. If you like it, let me know on the comment setction below. I will design a HOLDER for this later, or you can simple just place like this.<h2> </h2><figure class="image image_resized" style="width:62.05%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413419/2023-11-19_a42a3edcdddfd.jpg"></figure><h2> Printing suggestions:</h2><figure class="image image-style-align-center"><img src="https://media.printables.com/media/prints/652871/rich_content/5df79618-1f96-4188-bbc2-e37e68fee497/image.png#%7B%22uuid%22%3A%2271c8ca82-4bed-4cbb-be20-b1b564b19a50%22%2C%22w%22%3A390%2C%22h%22%3A182%7D"></figure>When you printing done, you can push down the rod to release it from birm:<img src="https://makerworld.bblmw.com/makerworld/draft/413419/2023-11-19_f4de91e35a75c.gif"> Make sure you use brim and increase brim to 15mm, at the same time I suggest to change the brim gap to 0. So it will ensure it will print successfully. If you are printing with WOOD filament, make sure you use 0.6mm nozzle and reduce the flow rate to 0.9. Other wise you may will have issue the filament clog within the nozzle, happened to me... Sad story. Also, wood filament may over extruding and cuse parts not fully extend, make sure you calibrate it!!! If the filament you use shinks a lot, parts might slide out. Pay attention. <figure class="image image_resized" style="width:51.45%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413419/2023-11-19_1e1cc9432daab.jpg"></figure><figure class="image image_resized" style="width:60.25%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413419/2023-11-19_4521f10cfbbcb.jpg"></figure><h3>Design:</h3>So, my first retractable design is Bamboo sword. It is fun to play.<figure class="image image_resized" style="width:53.71%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413419/2023-11-25_79b228e570cbb.jpg"></figure>&nbsp;<figure class="image image_resized" style="width:50.43%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413419/2023-11-25_c1ad57f7061ed.jpg"></figure>Showed it to my boss, and she didn't like the noise when I play it. She said it would be cool if I can design something like Wand. I said, okay. Because she is boss so I have agree whatever she said. I started searching how the heck a wand that she like looks like and get some idea of it. At the mean time, I was trying use similar retractable mechanism from Bamboo Sword design. Eventually, I found the wand style that she like, (credit to Arcan Matteo). So I designed the similar organic look. and it looks very rough, my organic design is not that good. So I started working on retractable mechanism, my boss mentioned she want the wand to be short. So there are a lot of parameters need to be change from larger size one.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413419/2023-11-25_a5a9fa271a7bb.png"></figure>Since the fundamental of retractable mechanism is all about interlocking, with smaller object, the interlocking mechanism design is going to be very ticky.Spend a few hour get design done and first prototype done. But having issue pree parts back on. Tired different filaments, silk and those with greater sinkage rate filament works better, but still stuck sometimes.Went back to the CAD changed the parameter dims, tried different locking mechanism, run the test print, and make revision again.Some different interlocking I have try on this model, FYI, if you want to design something similar.<figure class="image image_resized" style="width:45.76%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413419/2023-11-25_164cf76729766.png"></figure>&nbsp;<figure class="image image_resized" style="width:44.86%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413419/2023-11-25_e49e57d41ec52.png"></figure><figure class="image image_resized" style="width:50.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413419/2023-11-25_2e59b0fef0b35.png"></figure>The most center one have more solid/infill when you printing, is trying to be heavier so when you play it, it will carry more momentum to carry rest of of the parts out. Not much weight increased, but better than none.&nbsp;Some of the fialure one during design, interesting thing during RnD, since this wand have such little size, ther interlock partS will be greatly effect by 0.1mm to 0.2mm parameter differences.(10mm OD good, 10.2mm OD part fly out, or stuck.) So, YOU KNOW HOW I WENT TO THE RABBIT HOLE.<figure class="image image_resized" style="width:64.13%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413419/2023-11-25_aa1c94c867d94.jpg"></figure>Here are some of the Okay revisions, but some parts will stuck and hard to press back. I have spend over 20 + prints and trying find out the best tolerance, because I don't want to just post a model out, I want something to meet my standard.So, if you get mad of one failure print on your side, looks those failure testing and my hours behind the scene.I think not only my time, but my bambu printer and filaments desired a thanks, lol.<figure class="image image_resized" style="width:64.65%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413419/2023-11-25_e4ab554bc16ab.jpg"></figure>Anyhow.<h2>Have fun!!</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413419/2023-11-19_821b9e9ceb2d4.gif"></figure>

Harry Potter Wand (Retractable) v1.7

Wand

AnsgarOdinson

Languages: 1.English / 2. German&nbsp;English&nbsp;I designed and printed this wall mount for the XBOX series 2 Elite Controller for a friend, since I don't use an xbox myself I'm sharing this beautiful piece with you =) The wall bracket has a recess where the magnetic charging station can be inserted, on which the controller then has to lie. <img src="https://makerworld.bblmw.com/makerworld/draft/81276/2023-10-11_05d0938049cb2.jpeg"><img src="https://makerworld.bblmw.com/makerworld/draft/81276/2023-10-11_b165f0d13b6d.jpg"> German Ich habe diesen Wandhalter für den XBOX series 2 Elite Controller für einen Freund konstruiert und gedruckt, da ich selbst keine xbox nutze teile ich dieses schöne Stück mit euch =) Der Wandhalter hat eine Aussparung wo die Magnetladestation eingelegt werden kann worauf der Controller dann zu liegen hat. <img src="https://makerworld.bblmw.com/makerworld/draft/81276/2023-10-11_e85fb1b5fb931.jpeg"><img src="https://makerworld.bblmw.com/makerworld/draft/81276/2023-10-11_472a769af9cc2.jpg">

Xbox Elite wallmount

3DXAV

I did this project last year, I&#39;m a mechanical designer and in this video you can find a whole tutorial on how I made this LightSaber Retractable. <a target="_blank" href="https://youtu.be/jiIGRBxh4nA?si=HpKv8rqjqA0J1Pxh" rel="nofollow noopener">https://youtu.be/jiIGRBxh4nA?si=HpKv8rqjqA0J1Pxh</a> I wanted to make the replica of Luke Skywalker, I live in Venezuela and my resources were a little limited to put a light bulb on it, like this which I solved with PLA Glowing material. And the handle of the saber is made of PLA Silk, thus saving me from having to paint it.

LIGHTSABER - RETRACTABLE

Star Wars

wuguigui

<h2>Summary</h2>Updated 20230615 Someone said the "1.1 Part-Shell-Front" is too tight to insert into the body, so I modified it, you can try the new part now.Updated 20230605I separated the body into 2 parts, now it is available for small printers( print size less than 10X10X10cm)Also, I removed the nostril, because, in the early TV cartoon series, they don't have any nostrils on the face; The front shell and the front body parts have a snap groove now， which can help you to assemble them easily.But I kept the old version, you can download the new version parts with the title "1.1"Updated 20230530Sorry guys, someone has an issue when assembling the part"Part-Shell-Front" to the body, Then I found the part is wrong, and now I reupload the part"Part-Shell-Front", Please download it again.Teenage Mutant Ninja Turtles, the memorial of the Post-80s generation.I designed a model kit version of the four cute turtles, It imitated the frame structure of the model kits, can prevent edge warping during printing, and can also recall the fun of assembling the model kit. Most of the sprues adopt hidden designs.You can try to print it with no support, 0.1 mm layer height is recommended.Follow the "Assembly Instructions" to make it. Watch the video to get more information.You can get the fun from the assembling.Click "Like" if you like it, or <a target="_blank" href="https://paypal.me/wuguigui?country.x=C2&locale.x=zh_XC" rel="nofollow noopener">buy me a cup of coffee</a> thank you!<h2>Post-Printing</h2><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=KjEl-mLZMsw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/KjEl-mLZMsw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Gameboy

Raspberry

Palworld

Kitchen

Pokemon

Prop

Minibar

Swords

Comics

Kit Cards

Gifts

Baby G

Gaming

Random

Holidays

Tools

Games

Toys

Wand

Gaming

Star Wars

TMNT