i.koettker

Tipicard

Lithophane box to use with led lamp kit 001For 130 x 130 x 3 mm lithophane

Lithophane Box 130 x 130 for led lamp kit 001

Beleuchtung

vitaprint 3D

This is a perfect Box for your Bambu Lab Spare Parts. I made all Bambu Lab printer Models to a Lid Design.You need foloowing Screws to complete it:&nbsp;<ul><li>M3 x 30 = 4 pcs (for the Hinges)</li><li>M3 x 35/40 = 2 pcs (for the Handle)</li></ul>&nbsp;Big Box:230 x 210 x 70<a target="_blank" href="https://makerworld.com/en/models/105260" rel="nofollow noopener">https://makerworld.com/en/models/105260</a>230 x 210 x 140<a target="_blank" href="https://makerworld.com/en/models/92348" rel="nofollow noopener">https://makerworld.com/en/models/92348</a>&nbsp;Small Box:175 x 130 x 110:<a target="_blank" href="https://makerworld.com/de/models/97173" rel="nofollow noopener">https://makerworld.com/de/models/97173</a>175 x 130 x 70:<a target="_blank" href="https://makerworld.com/de/models/408354" rel="nofollow noopener">https://makerworld.com/de/models/408354</a>

Bambu Lab Box L A1 Mini / P1S / A1 / P1P / X1C

3D Drucker

capze.

I designed this model to be able to store stuff without having to worry that it will collapse under its own weight.Some improvements are:<ul><li>Easier connections between parts</li><li>Some overhang support for a cleaner print</li><li>A top flat plate</li><li>how about that it is parametric?</li></ul><h3>Printing</h3>You can either:<ul><li>download the STLs (it will fit wine bottles)</li><li>“change parameters” in the Fusion 360 file to suit your own needs.</li></ul>Does not need supports.<h3>Assembly</h3>Assembly is easy, should work even if your printer is not calibrated.The connector goes somewhere on the crosses, I suggest using a few depending on height.&nbsp;Note: This is not a remix, thank you for the inspiration.&nbsp;

Stackable Bottle Holder PARAMETRIC

Küche

HarleyCodes

This is a remix on <a target="_blank" href="https://makerworld.com/en/models/25035" rel="nofollow noopener">https://makerworld.com/en/models/25035</a> made by <a target="_blank" href="https://makerworld.com/en/u/1932805721" rel="nofollow noopener">JonathanLevi</a>.&nbsp;In this remix:- I have simplified the geometry as it was causing some print issues.- Orientated the track connector so that its rotation is aligned with the rest of the geometry- Reversed slope of track connector, allowing better bed adhesion and eliminate need for support material. &nbsp;Uploading both Cool and PEI plate profile so you can print from BambuHandy no fuss.&nbsp;Change Notes:<ul><li>Wall loops increased to 4, and infill pattern changed to Gyroid. There was an issue with splitting under load, as a result of the layer direction. The direction can't be changed, but can be strengthened. </li></ul>

Beleuchtung

3D Drucker

Küche

Kinder