hotdogger

Troye Stonich

My wife likes to bring her Nalgene water bottle on trips and the cup holders aren't big enough to fit. I designed this to follow the angle of the front cup holders for a pleasing fit.

Ford Mustang Mach-E cupholder for large water bottle

Mustang

kmcsharry

A series of trays and holders that keep all your bits organized while gaming. Remixed from Voidstarlabs' <a target="_blank" href="https://youtu.be/ra_9zU-mnl8?si=xEz3azlPOGmiP7eJ" rel="nofollow noopener">Gridfinity</a>. It uses a half size 21mm block on the holders to better accommodate the deck holders 2x2.5 standard gridfinity block footprint, but still uses the standard 42mm tray. It all stacks together to be relatively compact.

Gridfinity Tabletop Board-game & Card-game Trays

tabletop

Makers Mashup

📝 Description See these in action on my <a target="_blank" href="https://www.instagram.com/p/CwGkvz0hIu2/" rel="nofollow noopener">Instagram</a>&nbsp;Butter-Fly Flippers are great butterfly toys for kids and fun. They are great pranks for kids as well! Put inside a book or box. When it opens they start flapping around. They are a very fast print, very thin. You will need a rubber band and I personally suggest using a paper clip or if you have it, piano wire to make a hook to put the rubber band in. You want a thicker smaller rubber band with a lot of strength to store more energy for the flipping. They are a ton of fun. 🖨️ Printing Tips&nbsp;.2 or smaller layer height, they print very flat. Go slow on the first layer to get a good grip. 🔗 Additional Information&nbsp;Most conventional rubberbands work great. Hair tie ones break too easy. &nbsp;When it comes to hardware, I rely heavily on Bambu Lab 3D printers. My A1 Mini https://rb.gy/uofj5 is a staple in my office, while my fleet of X1C Carbons https://rb.gy/9r2az ensures rapid and high-quality production.

Butter-Fly Flippers! 

toys

squinn

A must-have drill accessory tool that both allows you to make sure you drill a perfectly perpendicular hole while also capturing all of the dust and debris. The front of the tool rotates so that you can select the guide hole that will best work for your drill bit, and then the cover on the back can be easily removed with a twist to dump the debris when you're done. A protruded pointer is included on the top of the piece to help with alignment.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/163361/2023-11-11_s7cilgno7l35.gif"></figure>This model has been designed so that no supports or brim are required, and the STLs are oriented as they should be on the print bed. Post print, the front and middle piece can be simply snapped together, so no glue or other hardware is required. I printed all three pieces of the one shown in the pictures in PLA, but TPU would likely work really well for the bottom “cover” piece if you have it.

Drill Guide and Dust Catcher

Tools

xsynaticc

Voronoi Christmas tree Ornament. Size is 60mm but can be scaled bigger or smaller.&nbsp;&nbsp;I recommend putting the cooling fan on 100%. To hang the Christmas ball just put a string through one of the many holes and you&#39;re good to go. &nbsp;The ball has a flat spot so it can be easily printed!&nbsp;Update: I have added a solid bottom version for those who have trouble removing the brim.

Airless Voronoi Christmas Ball Ornament

Ornaments

3DMagpie

These started as signs for my own use vendor fairs and pop ups that would show off the multicolor printing capabilities of Bambu Lab printers alongside the prints. I couldn&#39;t find anything remotely like what I had in mind so here we are. The signs measure apprx. 101 mm x 62 mm x 2 mm. The lettering is set to apprx. 1 mm. They do vary slightly particularly in thickness because I designed them in Bambu Studio.&nbsp;These came out great for my needs. My hope is they&#39;ll help out other local sellers, too. Some stuff that may help:<ul><li>I&#39;m new to 3D model development so set expectations accordingly. I have tested most of the versions but not all. Let me know if you bump into any issues, and I&#39;ll do my best to fix it and learn along the way. We all gotta start somewhere!</li><li>The main print profile has all the signs face down for that fantastic surface quality. They look great on the Textured PEI plate. I&#39;d love to see Cool Plate and some of those PEO finishes!</li><li>Euro Print Profile for AMS now available with two raw print file versions for both AMS and layer height changes for non-AMS printers. I have NOT finished test printing all variations yet but wanted to get these files available per request. Please inspect your slices carefully before printing! I&#39;m fighting Bambu Studio to get these to line up on the face. When in doubt you may want to print face up and play with your top surface settings instead.</li><li>I included a second 3MF for easier text editing. USE WITH CAUTION! The text goes whacky as soon as you Edit Text in the By Object view. This is not a me thing…it&#39;s a slicer software limitation we&#39;re working around.<ul><li>Bambu Studio doesn&#39;t offer an align feature, so you have to manually adjust z height and sometimes X and Y angles. It&#39;s even worse if you try to edit face down.</li><li>After you with that battle, if you want the cleanest surface finish you&#39;ll need to flip the sign face down and then do some fine tuning after slicing to get the faces flush. (I found adjusting the Y axis 180 degrees to be easiest.)</li></ul></li><li>For those not familiar, STL&#39;s as always are just the geometry. Each was made with separate objects for the sign and text, so if you do want to download just one or two and manually Paint in Bambu Studio it should be a snap with Fill.</li></ul><figure class="image image_resized image-style-side" style="width: 35.75%"><a href="https://makerworld.com/en/models/417013#profileId-319350" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000050853/design/2024-04-06_373c9ecb61763.jpg"></a></figure><h3>NEW! I&#39;ve designed a <a target="_blank" href="https://makerworld.com/en/models/417013#profileId-319350" rel="nofollow noopener">new set of price signs</a> with built-in stands that are a bit smaller, use less filament, and require less print time. I use a mix of both in my pop-up booth! These are the new ones. &gt;&gt;&gt;</h3>Past updates to this original design:&nbsp;ADDED November 26, 2023: Euro Print Profile as well as 3mf versions for AMS and non-AMS change at layer height in the raw print files. WARNING these are raw files and work in progress in response to request. Please check your slices carefully for any errors. Comments alerting me to any issues are welcome so I can fix them!&nbsp;REVISED November 2, 2023: Fixed floating regions on the $12 and $25 signs thanks to a heads up they were failing from a commenter. I&#39;ve replaced the main Print Profile and Face Up 3MF raw file for customization. I also replaced those two STL&#39;s with revised versions.

Price Signs with Oval Stands (Dollar & Euro)

seller

Speewack

Sharing PortedtoReality's <a target="_blank" href="https://www.thingiverse.com/thing:1915956" rel="nofollow noopener">Han Solo DL-44 Blaster</a> model.I've laid it out on build plates for the X1 Carbon based on filament color and type for the different parts, but the model itself is not mine.&nbsp;This is the blaster. You can find the stand at: https://makerworld.com/en/models/19557

Han Solo Blaster DL-44

props

Chickenbisket

A large cryptex-style container for gifting wine/liquor/similarly shaped items. The combination is adjustable by changing the position of the notched inner number ring (keyed sleeve.stl) to align the notch with the desired code number (number sleeve.stl). The box is fully 3d printed. You will need to make 1 each of the inner cylinder/outer cylinder/lock nut, and 8 each of the keyed sleeves/number sleeves. To assemble you insert the keyed sleeve into the number sleeve and stack all the assembled sleeves onto the outer cylinder. The lock nut is then screwed on to retain all the rings. With the combination entered you can slide the inner cylinder into place and rotate the numbers to lock.&nbsp;To print the full box on a Bambu printer requires going into the machine settings in Bambu Studio and modifying some settings. I've also uploaded a slightly shortened box that will fit in the default printer settings. This brings the internal length down from 13in to 12.5 in which should be plenty for a wine bottle and most single malts.&nbsp;Here is a link to the wiki on how to enable the full print volume. https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations

Wine Bottle Cryptex

cool

Fangoh

I ordered these hygrometers from amazon. I think they are a common size. From the web site:<blockquote>External dimension: 1.89 x 1.13 x 0.66" (48 x 28 x 17mm)LCD size: 1.4 x 0.66" (35.7 x 16.8mm)Function: display temperature and humidityApplication: temperature/humidity measurement</blockquote>Link: <a href="https://a.co/d/fYnS9OW" rel="nofollow">https://a.co/d/fYnS9OW</a>Print with support for the top portion of the display window. No other supports needed.

Gridfinity Thermometer / Hygrometer Holder

Grids

YelTrik Designs - Click FOLLOW

The cable chain that comes with the P1/X1 has only one of these PTFE chain clips to control the PTFE feed tube. Adding two or three of these to the chain keeps the PTFE tube controlled and out of the way of the glass top or side wall of the chamber. Simple to print and install.&nbsp;Note:<ul><li>Install in the open area of the chain link, top of the clip first, and then the bottom clip. Install the PTFE tube once the clip has been installed on the chain.</li><li>Use the filament that meets the demands of your chamber temperatures. </li><li>Do not install these close to the print head! The PTFE tube near the print head needs to be unconstrained for proper function.</li></ul>&nbsp;<a target="_blank" href="https://makerworld.com/en/u/1072890529" rel="nofollow noopener">Click here to check out other PTFE Accessories</a>&nbsp;

PTFE Chain Clips

X1 Carbon

MakeIt3D

<h2>Summary</h2>Tired of receipts, dust, and other debris clouding your workspace?This 3D Printable Mini Trashcan is the perfect tool for throwing away, storing, or disposing trash and other belongings.This print features a fully functioning built-in swing allowing you to store items inside without things accidently falling out.This item is easy to print featuring 2 main files<ul><li>LID STL</li><li>Bottom STL</li></ul>Total Size of the product is roughly 6 inches Height, 3.5 inches Width, 3.5 inches Length.Feel free to print out the designs and share photos of your results. I would love to see them. All MakeIt3D Designs are made and designed in-house. When you purchase any of these designs you do NOT have the rights to sell the digital files or printed models. 3D PRINTING SETTINGS Printer Used: Bambu Labs X1 Layer Height: 0.2 Infill: 10% - 15% Honeycomb Print Speed: Slow Speed on First Layers Material: PLA Wall Count: 2 Walls