hongmoondo

Flash72

Store your pens and pencils inside a pencil case in the shape of a giant pencil.&nbsp;Can be printed both with and without an AMS/MMU.<h4>Printing Tips - AMS Version</h4><ul><li>Simply split to parts in the slicer and then you can just set the colour of each part as required.</li><li>No supports required</li></ul><h4>Printing Tips - Non AMS Version</h4><ul><li>Print each individual part in appropriate colours</li><li>Parts should already be correctly oriented</li><li>Brim recommended on the lead tip and wood tips parts</li><li>For the rubber part set a colour change at the appropriate layer in your slicer</li><li>No supports required</li><li>Once printed just use some super glue to join the lead and wood tip to the main body</li></ul><a target="_blank" href="https://makerworld.com/en/models/148075#profileId-161610" rel="nofollow noopener">Goes well with the Giant Sharpener Pencil Holder</a>

Giant Pencil Pencil Case

RandomKhaos

NEWSIn order to expand upon my hose adapter design, I created a generic version. This version has a base plate that can be mounted via wood screws or M3 bolts to various surfaces. This affords the ability to attach to more things, like a resin printer which I'm currently using it for. The parts work with each other, so you can use your existing parts to attach to the new base. The new design can be found at: <a target="_blank" href="https://makerworld.com/en/models/374008#profileId-273980." rel="nofollow noopener">https://makerworld.com/en/models/374008#profileId-273980.</a>&nbsp;Update 2/19/24Some users have experienced issues with fitting the magnets in the holes. The design is meant to have the magnets press fit into the holes, so there's some expectation that they are a bit tight. Since the tolerances are a bit tight and there can be variations in the printed result, not to mention any size variances with the magnets, I've included a test print. I suggest printing out the Magnet_fit_test.stl file to test fit magnets before printing out the larger parts so you don't waste the filament. Make sure to test with the filament you plan on using for your final part. If you find that the magnets aren't fitting as expected, you can tweak your X-Y hole compensation in Bambu Studio/Orca Slicer. Make small adjustments up or down as required.<img src="https://makerworld.bblmw.com/makerworld/draft/724251/2024-02-19_6d8687fb9fee58.png">&nbsp;Update 1/18/24&nbsp;After reviewing user feedback on the parts, I've made changes to the 3 inch and 4 inch adapters.<ul><li>3 inch adapter<ul><li>Rounded the corners of the base plate and central body to improve print reliability and reduce warping with ASA/ABS</li><li>Increased the thickness of the model where the middle section meets the base plate to increase structural integrity and improve reliability while printing with ASA/ABS</li><li>Increased the height by 10mm to increase print reliability with overhangs by reducing the steepness of the internal angles. This matches the height of the 4 inch adapter</li></ul></li><li>4 inch adapter<ul><li>Rounded the corners of the base plate and central body to improve print reliability and reduce warping with ASA/ABS</li><li>Increased the thickness of the model where the middle section meets the base plate to increase structural integrity and improve reliability while printing with ASA/ABS</li><li>Redesigned the placement of the magnets to fix an issue where you could only attach the hose in two directions instead of 4. This increased the amount of magnets required by 2.</li></ul></li></ul>&nbsp;** EDIT **Per request, I added a 4 inch adapter. Due to the size of the hose, I had to make quite a bit of modifications to the model in order to be able to mount to the printer. To be able mount the base to the printer I had to add holes through the plate that holds the magnets in order to pass a wrench through to tighten the screws. To make this feasible, I had to adjust the amount of magnets and adjust the angle of the guides. Kind of ruins the symmetry that I had going, but it works.<img src="https://makerworld.bblmw.com/makerworld/draft/724251/2024-01-14_9edfcaca6d389.jpg">&nbsp;&nbsp;Rear vent hose adapter for Bambu Labs X1C/P1S printers.&nbsp;I designed this exhaust vent adapter so that I could attach a 3 inch hose to my X1C in order to vent outside. I wanted to have the base permanently attached to the back of the printer, while the hose could attach/detach via magnets. This gives me the flexiblity to easy remove the hose for maintenance or move to another printer/device. The 4 guides are there to provide stability and to help guide the magnets together for a strong attachment. I also wanted to be able to close off the vent hose when not in use, so I created a cover that's also attached with magnets.&nbsp;In order to attach the base, I was able to utilize the 3 existing holes and the 1 available screw that are around the exhaust fan. I cut threads in the holes with an m3 tap, which is the same size as the other screws on the printer. You may be able to use small machines crews if you are unable to thread the holes yourself.<img src="https://makerworld.bblmw.com/makerworld/draft/724251/2024-01-12_4ee6eaec915d.jpg">&nbsp;The magnets are 10x2mm cylinder neodymium magnets. I made the parts so that the magnets could be press/friction fit into the holes. The hose adapter magnet holes are a bit deeper to account for the loss of depth due to bridging. You could glue in the magnets of necessary. The magnets I sourced from Amazon weren't exactly as advertised, but measured 10x1.67mm which I designed the holes to fit.&nbsp;The hose adapter diameter is a bit undersized on purpose. It's easier to fit and clamp the hose onto the smaller diameter, I hate fighting to clamp on vent hoses.&nbsp;I've printed the parts using PLA, which is probably not the best choice for long term. I may reprint later on using ASA, but so far the PLA parts have held up okay. The base and hose adapter do not need supports to print. The hose cover does unfortunately need supports due to the large overhang/bridging requirements.&nbsp;Parts:<ul><li>10x2mm (10x1.67mm) magnets: <a target="_blank" href="https://a.co/d/aY7KSEY" rel="nofollow noopener">https://a.co/d/aY7KSEY</a></li><li>Black 3 inch vent hose: <a target="_blank" href="https://a.co/d/acagw97" rel="nofollow noopener">https://a.co/d/acagw97</a></li></ul>

X1C/P1s Magnetic Rear Vent Hose Adapter

Printer

entroisdimensions_figurine

Charizard is now available, and you have the choice between different file formats:<ul><li>STL</li><li>3mf for Multicolor Bambu Lab printer</li><li>3mf for Multicolor Prusa printer</li></ul>In all file formats, you have the choice between two versions of Charizard:<ul><li>with the wings on its back</li><li>without the wings, which can be printed separately</li></ul>Video of printing the model: <a target="_blank" href="https://www.instagram.com/polymaker_figurines/" rel="nofollow noopener">Instagram</a>, <a target="_blank" href="https://www.tiktok.com/@polymaker_figurines" rel="nofollow noopener">TikTok</a>, <a target="_blank" href="https://www.youtube.com/channel/UCScmlttdRwRbBA61ZGlUVJg" rel="nofollow noopener">YouTube</a> For printing, I used PolyTerra PLA filament from Polymaker: 6 colors version:<ul><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351937593" rel="nofollow noopener">PolyTerra PLA Sunrise Orange</a>(for the body)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574352298041" rel="nofollow noopener">PolyTerra PLA Savannah Yellow</a> (for belly and flame)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=40620425674809" rel="nofollow noopener">PolyTerra PLA Muted Blue</a> (for the eyes and wings)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574352101433" rel="nofollow noopener">PolyTerra PLA Lava Red</a> (for the flame)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574352232505" rel="nofollow noopener">PolyTerra PLA Cotton White</a> (for the claw, white of the eyes )</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351282233" rel="nofollow noopener">PolyTerra PLA Charcoal Black</a> (for pupil)</li></ul>To discover which new models will be released next, follow @polymaker_figurines: <a target="_blank" href="https://www.instagram.com/polymaker_figurines/" rel="nofollow noopener">Instagram</a>, <a target="_blank" href="https://www.tiktok.com/@polymaker_figurines" rel="nofollow noopener">TikTok</a>, <a target="_blank" href="https://www.youtube.com/channel/UCScmlttdRwRbBA61ZGlUVJg" rel="nofollow noopener">YouTube</a> Join the Figurines Community on <a target="_blank" href="https://discord.com/invite/r2ujMfEb7S" rel="nofollow noopener">Discord</a> Happy Printing!-----------------------------------------------Printer settings on the Bambu Lab X1C<ul><li>Rafts: No</li><li>Supports: Yes</li><li>Resolution: 0.2mm</li><li>Infill: 10%</li><li>Filament brand: Polymaker</li><li>Filament color: Red, Yellow, Black, White, Blue</li><li>Filament material: <a target="_blank" href="https://us.polymaker.com/products/polyterra-pla" rel="nofollow noopener">PolyTerra PLA</a></li></ul>

Charizard Multicolor

Figure

Kocyns

Thanks for video: @marsgizmo (ytb)<h4>PRINT SETTINGS</h4><ul><li>Height: 100 mm</li><li>Recommended material is PLA and layer 0,12mm</li><li>Minimal scale 75%!</li><li>Optimized model for printing without support!</li></ul><h4>Remix: <a target="_blank" href="https://makerworld.com/en/models/173902#profileId-191118" rel="nofollow noopener">Heart for Rose Bear</a></h4><figure class="image image_resized" style="width: 40.76%"><a href="https://makerworld.com/en/models/173902#profileId-191118" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000152175/design/2024-02-06_bdaecc3a4c139.png"></a></figure>&nbsp;If you want permission for commercial use: <a target="_blank" href="https://www.patreon.com/kocy/" rel="nofollow noopener">patreon.com/Kocy</a>

T

Printer

Figure

valentine