Hobbyist Maker

SabreDesign

Remix of HanochH model on thingiverse, all rights go to the original creator. I merged the parts together and scaled to realistic size as seen in the movie. Also optimised the mesh to minimise some steeper overhangs on the details.  Body and head are best printed seperately to ensure higher quality. Head has a thick brim added to avoid any vibrations during printing, this brim can be simply broken off by hand. I also added a multicolour version for the head with the eyes printed in black in case you dont choose to paint the model.  I printed multiple of these models and painted some for friends and family. You only need basic acrylic paint, some black nail polish and some brushes to bring little groot to life. I found normal acrylic paint works great on PLA parts.   You can follow the directions below if you want to paint the model:<ol><li>Use a fairly light coloured filament to print the model, I prefer to use white or a light brown since it creates a nice base colour.</li><li>Paint the base coat in medium to dark brown (optional: use hairdryer to dry paint quickly)</li><li>Lightly paint a lighter wood brown colour over the darker brown coat, making sure cracks and crevasses are not filled by this layer (again can use hairdryer to accelerate drying)</li><li>Use an even lighter brown and very little paint on the brush to very lightly brush on some highlights (let dry again)</li><li>Make a black and dark brown dilluted wash with water and use a spunge or kitchen paper to dab it into the crevasses of the model, make sure to wipe it away with kitchen paper within a few second after dabbing it on, this ensure the lighter brown top coat keeps its light colour does not get to dark or dissolves by the wash again.</li><li>Let the whole model dry thoroughly before painting the little vines and mossy hair with light and darker green paint and a very thin brush.</li><li>Finally after all has dried use black nail polish to paint the eyes and make them glossy, this really brings the model to life. I put one drop of nail polish on the eyeball and then dab the nailpolish brush dry on a piece of paper and then continue using it to precisely coat the eyeball to the edges. Less is more in this case, you doint want the nailpolish to droop and can allways add a little more if you used to little.</li><li>Finally after drying you can choose to coat the whole model in a spraypaint clearcoat to seal the paint.</li></ol>&nbsp;The Remix of HanochH is based of this model <a target="_blank" href="https://www.thingiverse.com/thing:2014307" rel="nofollow noopener">https://www.thingiverse.com/thing:2014307</a> all rights to the original creator

Baby Groot

Busts

copehill077

This contains Settlers of Catan &amp; Settlers of Catan: 5-6 Player Expansion.&nbsp;<h2>ANNOUNCEMENT: NEWLY RELEASED <a target="_blank" href="https://makerworld.com/en/models/376481#profileId-276457" rel="nofollow noopener">CATAN ORGANIZER TRAYS</a>!! <a target="_blank" href="https://makerworld.com/en/models/201626#profileId-222020" rel="nofollow noopener">COMPLETE EDITION</a> MODELS ARE OUT, SEE LINKS BELOW. </h2>&nbsp;This is a remix of the 3D Settlers of Catan by Dakanzla (<a target="_blank" href="https://www.thingiverse.com/thing:2525047" rel="nofollow noopener">catan-style boardgame 2.0 (magnetic &amp; multicolor)</a>) made so you can now have up to 6 players play! This contains the same filament colors as Ty Robbins&#39; <a target="_blank" href="https://makerworld.com/en/models/93623#profileId-100388" rel="nofollow noopener">Settlers 3D</a>. I used the same coloring for filament colors as them. I remixed the parts to make it so people can create the Settlers of Catan AND the 5-6 Player Expansion all in one project without printing any plates again, which would waste filament.&nbsp;Tips for printing &amp; assembly:<ul><li>If you want to add magnets to the bases, I used 2 boxes of these <a target="_blank" href="https://www.amazon.com/dp/B092MCQ3NL?psc=1&amp;ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">3x3mm neodymium magnets </a>and inserted 2 into each slot, while pressing it in with a cover. This <a target="_blank" href="https://youtu.be/xtjiwE4k6zA?si=Ch8pZ6jMUZUcuKVU&amp;t=644" rel="nofollow noopener">assembly video</a> may help with this process.</li><li>To get the most detail out of the model, turn on variable layer height for some models, especially the Water Landscape &amp; Harbor Water Landscape.</li><li>To waste less filament, turn on purge into infill, and consider purge into object to create unique colors of cities, settlements, ships, tiles, etc.</li></ul>This contains Settlers of Catan &amp; Settlers of Catan: 5-6 Player Expansion. If you haven&#39;t printed anything yet and want to play Catan with 5-6 people, print this. For a full table of the Catan editions and expansions, refer to the table below:&nbsp;Catan Editions Included in this Model<figure class="table" style="width:627.547px;"><table class="ck-table-resized" style="border:1px double rgb(179, 179, 179);"><colgroup><col><col><col></colgroup><tbody><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">Board Game Name</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">Includes</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">Prerequisites</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">Settlers of Catan</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">X</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"> </td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">Settlers of Catan: 5-6 Player Expansion</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">X</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"> </td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">Settlers of Catan: Seafarers</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"> </td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"> </td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">Settlers of Catan: Seafarers 5-6 Player Expansion</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"> </td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"> </td></tr></tbody></table></figure>If you want to print out any other permutation of Catan, here are the links:&nbsp;<a target="_blank" href="https://makerworld.com/en/models/201626#profileId-222020" rel="nofollow noopener">Settlers of Catan Complete Edition (Settlers of Catan, Settlers of Catan: 5-6 Player Expansion, Seafarers, Seafarers: 5-6 Player Expansion)</a><a target="_blank" href="https://makerworld.com/en/models/179323#profileId-197226" rel="nofollow noopener">Settlers of Catan: Base Game &amp; 5-6 Player Expansion</a><a target="_blank" href="https://makerworld.com/en/models/179353#profileId-197251" rel="nofollow noopener">Settlers of Catan: 5-6 Player Expansion</a><a target="_blank" href="https://makerworld.com/en/models/201615#profileId-222013" rel="nofollow noopener">Settlers of Catan: Seafarers</a><a target="_blank" href="https://makerworld.com/en/models/201612#profileId-222010" rel="nofollow noopener">Settlers of Catan: Seafarers 5-6 Player Expansion</a><a target="_blank" href="https://makerworld.com/en/models/201644#profileId-222037" rel="nofollow noopener">Settlers of Catan: Seafarers &amp; Seafarers 5-6 Player Expansion</a>&nbsp;Filaments Used in Photos:Bambulab PLA Matte Matte Desert TanBambulab PLA Basic RedBambulab PLA Basic OrangeBambulab PLA Basic GreenBambulab PLA Basic Bambu GreenPolyterra PLA Savannah YellowMonoprice PLA+ Light BlueMonoprice PLA Hi-Gloss Blue GreenMonoprice PLA Hi-Gloss GrayInland PLA+ PurpleInland PLA+ WhiteElegoo PLA Black(Monoprice filament may be hard to find)&nbsp;Disclaimer: Dragon robber not included in .3mf. Here is the link: <a target="_blank" href="https://makerworld.com/en/models/59435#profileId-63033" rel="nofollow noopener">https://makerworld.com/en/models/59435#profileId-63033</a>&nbsp;Looking for a cheap, efficient storage solution to hold all of the tiles and pieces? Check out my <a target="_blank" href="https://makerworld.com/en/models/376481#profileId-276457" rel="nofollow noopener">3D Catan Organizer Trays!</a> If you want to save filament, check out the <a target="_blank" href="https://makerworld.com/en/models/376608#profileId-276603" rel="nofollow noopener">Lite Version - 3D Catan Organizer Trays!</a><figure class="image image_resized" style="width:40.24%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000179323/design/2024-03-22_4b00535817494.gif"></figure><figure class="image image_resized" style="width:52.92%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000179323/design/2024-03-22_11af61d1f8961.gif"></figure>

Settlers of Catan:Base Game & 5-6 Player Expansion

Tabletop

MakerVerse Designs

Fully 3d printed crocs shoes<ul><li>Printed with Overture TPU</li><li>PLA for the snap button</li></ul>Important notes:<ul><li>It is for EU shoe size number 42 (male), but you can scale every part (CrocsL1,CrocsR1,Holder,Mount1,Mount2) to your size (use uniform scaling)</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-19_0266f756a989a.png"></figure><ul><li>If the shoe is too big to fit to the printers height, use the “WithSupport”-Version, rotate in Y-Axis (green) and use the cut tool in Bambu Studio to create a new flat surface parallel to the print bed<ul><li>I uploaded an .stl file without cut on the bottom for better scaling</li></ul></li></ul>&nbsp;<ul><li>There are two ways to print this:</li></ul><ol><li>Use a textured PEI bed and print it standing up without support</li><li>Or use another not so sticky bed and print it standing up with support</li></ol><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-12_cc0523cbae068.png">&nbsp;If you can&#39;t get enough of printed shoes, check out my new model (Slide Shoes, Adilette):<a target="_blank" href="https://makerworld.com/en/models/488792#profileId-401842" rel="nofollow noopener">https://makerworld.com/en/models/488792#profileId-401842</a><img class="image_resized" style="width: 41.76%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-06-08_bb258037ea2a1.png">Have fun with it and leave a like or subscribe if you like it!If there are any suggestions for improvement, feel free to write a comment.

Crocs Shoes - Fully 3d-printed

Misc

This free planter design is part of the Juno Planter Collection, you can see the whole collection below. The complete set is available on my patreon: <a target="_blank" href="https://www.patreon.com/SabreDesign/shop/juno-planter-collection-with-drip-trays-181440?source=storefront" rel="nofollow noopener">https://www.patreon.com/SabreDesign/shop/juno-planter-collection-with-drip-trays-181440?source=storefront</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/862027/2024-04-14_296c544c85673.png"> This small free planter features a drip container which twist and locks into the bottom of the pot. The pot has a 80mm opening and is 105mm tall. Support is needed in the locking channels on the bottom of the pot, the support is very easy to remove when using my print profiles. When slicing yourself, you have to draw manual supports along the edge of the locking channel to get optimal support removal. If you like this design consider supporting me and get the full Juno planter collection. You can join a patreon membership to get exclusive models or commercial licenses here: https://www.patreon.com/SabreDesign&nbsp;Check out more of my designs below and on my profile:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/862027/2024-04-14_979216193e1ed.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/862027/2024-04-14_f8d6f951595ef.png"></figure>

Planter with drip container

Planters

Le RmX en 3D

Universal car phone holder, everything is printed on a single plate, unless you want to make the clamp in PETG.&nbsp;I suggest making the clamp out of PETG because in PLA, it deteriorates very quickly and stops working.&nbsp;Ultra-simple assembly, no screws to use, only an elastic band.&nbsp;<figure class="image image_resized" style="width:75.09%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000442644/design/2024-04-25_1e6a6a132a1ad.png"></figure>&nbsp;Feel free to give me feedback on the use and printing of the holder.

Universal car phone holder

Car Accessories

aPyroDesign

Inspired by the Auryn from the movie The Never Ending Story, this animated fidget spinner is designed to be printed as a multicolor print using the AMS. It can also be printed as single color.&nbsp;This fidget spinner is unlike a standard spinner. The shapes on the spinners are actually frames of animation. When you spin the spinner and view the spinner through a smartphone camera, the animations come to life. There are also two other ways to view the spinners. The instructions are below for the 3 different viewing methods.&nbsp;Smartphone Camera Instructions: Click <a target="_blank" href="https://spinnermation.com/pages/cell-phone-method" rel="nofollow noopener">HERE</a>&nbsp;Strobe Light App Instructions: Click <a target="_blank" href="https://spinnermation.com/pages/strobe-method" rel="nofollow noopener">HERE</a>&nbsp;3D printable handheld viewer: Click <a target="_blank" href="https://spinnermation.com/pages/handheld-spinner-viewer" rel="nofollow noopener">HERE</a>&nbsp;The optional parts for this viewer are included within the 3mf file.&nbsp;&nbsp;You will need an r188 bearing for the spinner and the viewer.Recommended bearings from Amazon: Click <a target="_blank" href="https://www.amazon.com/dp/B095GTJC1R?linkCode=ssc&amp;tag=onamztravi04a-20&amp;creativeASIN=B095GTJC1R&amp;asc_item-id=amzn1.ideas.1JB9SWU6KEPUY&amp;ref_=aip_sf_list_spv_ons_mixed_d_asin" rel="nofollow noopener">HERE</a>&nbsp;Assembly GuideEasy assembly video: Click <a target="_blank" href="https://drive.google.com/drive/folders/1zjWD1vB6mJ9Tk475IS7QAs6kHIoJ6YSH?usp=drive_link" rel="nofollow noopener">HERE</a>&nbsp;&nbsp;Filaments used in this project.&nbsp;PLA Basic Black for main body: Click <a target="_blank" href="https://shrsl.com/4g2n4" rel="nofollow noopener">HERE</a>&nbsp;PLA Silk Silver For Scale color 1 : Click <a target="_blank" href="https://shrsl.com/4hpm6" rel="nofollow noopener">HERE</a>&nbsp;PLA Silk Gold for Scale Color 2  : Click <a target="_blank" href="https://shrsl.com/4hpni" rel="nofollow noopener">HERE</a>&nbsp;All links are Affiliate links&nbsp;Files included:&nbsp;3MF file that is ready for AMS printing in Bambu Studio. File includes two quality versions. I recommend the high resolution version, but there is a 2mm layer height version that will print in half the time.&nbsp;3MF file for non Bambu Printers. I know not everyone has a Bambu printer and this one is for you all.&nbsp;Top and Bottom Cap files.&nbsp;Bearing Top Cap.&nbsp;(Optional) Bearing top tool. This will make it easier to lock on the bearing top cap.&nbsp;&nbsp;Interested in selling my spinners? Check out my Patreon for more info. Click <a target="_blank" href="https://www.patreon.com/APD" rel="nofollow noopener">HERE</a>&nbsp;&nbsp;

Auryn Zoetrope Spinner

Toys

Xander Designs

Here is my version of the Astrolabe that is featured in the opening credits of Game of Thrones. Not quite as detailed as the movie version but looks impressive and spins on all axis.This Version Features a Dragon at the base but if there is enough interest i can upload the version with 4 Animals (Lion, Stag, Dire Wolf and Dragon)Assembly is easy with no need for additional hardware or glue, it simply slots and screws together.See assembly video below.&nbsp;Sell my prints commercially by joining my <a target="_blank" href="https://patreon.com/xanderdesigns?utm_medium=unknown&amp;utm_source=join_link&amp;utm_campaign=creatorshare_creator&amp;utm_content=copyLink" rel="nofollow noopener">Patreon</a>Want to say ‘Thank You’  <a target="_blank" href="https://www.buymeacoffee.com/xanderdesigns" rel="nofollow noopener">Buy me a coffee</a><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=xH1PZot0AwI&amp;ab_channel=XanderDesigns"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/xH1PZot0AwI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Dragon Astrolabe 

Artwork

Fletch

Spring has started, so that means it&#39;s time to get the greenhouse ready for some fresh veggies! I wanted to do some thing a little fun and different this year, so I decided to make some Mario themed seed starters for getting the plants ready. These pots are self watering, so you don&#39;t have to worry about watering them every day.&nbsp;Place a cotton ball or any wicking type material in the bottom part of the small pot. Screw the bottom onto the pot, add some dirt and seed, add a little water to the dirt, and you&#39;re ready to go. Make sure the water stays below main pot, so that the wicking material stays wet and keeps your plants happy!&nbsp;When you&#39;re ready to transplant, unscrew the bottom of the pot and push up!&nbsp;UpdateA profile for a humidity dome has been added. I decided to go with individual domes for each pot after a lot of experimenting. It somehow came out requiring less plastic and print time when printing 6 at a time vs a single dome covering the entire 3x2 tray. I recommend letting the build plate cool before trying to remove as it is only 2 surfaces and single wall. The print speed is turned down a lot to improve clarity.

Mario Seed Starter Tray - Self Watering

Vases and Jars

NakedPlate

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:     PLA BambuLab Basic Black Transmission Distance: 0.6     PLA BambuLab Basic Red Transmission Distance: 5     PLA BambuLab Basic Gray Transmission Distance: 2     PLA BambuLab Basic Jade White Transmission Distance: 4Swap Instructions:     Start with Black     At layer #5 (0.48mm) swap to Red     At layer #10 (0.88mm) swap to Gray     At layer #11 (0.96mm) swap to Jade White for the rest.

Deadpool (HueForge)

HueForge

BrewBoy

Plinker V2.0 (Bolt-Action Blaster):&nbsp;The second entry in my shell-ejecting plinker series. The V2.0 features a bottom loading magazine and functional rails for mounting accessories, STEP files are included if you would like to make your own adjustments or parts. This is an ongoing work in progress as I continue to make improvements and different accessories to allow for lots of different customizations.&nbsp;Only requires a nuts, bolts &amp; a few springs (<a target="_blank" href="https://www.aliexpress.com/item/1005002523758634.html?aff_platform=true&amp;aff_short_key=UneMJZVf&amp;isdl=y&amp;src=bing&amp;pdp_npi=3%40dis%21CAD%211.49%211.49%21%21%211.88%21%21%40%2112000021005031078%21ppc%21%21&amp;albch=shopping&amp;acnt=135095331&amp;isdl=y&amp;albcp=412811419&amp;albag=1311717734383599&amp;slnk=&amp;trgt=pla-4585581970548950&amp;plac=&amp;crea=81982433154568&amp;netw=o&amp;device=c&amp;mtctp=e&amp;utm_source=Bing&amp;utm_medium=shopping&amp;utm_campaign=PA_Bing_CA_PC_customlabel1&amp;utm_content=customlable1%3D7&amp;utm_term=aliexpress%20305mm%20spring&amp;msclkid=91572ea3b6a41a4e20b94b3fbac2f23b" rel="nofollow noopener">305mm Compression Spring Wire Dia 0.3 0.4 0.5 0.6 0.7 0.8 1 - 5mm Outer Dia 3 3.5 4 4.5 5 5.5 6 7 8 10 12 - 60mm Length 305 mm (aliexpress.com)</a>) ***This link may not work in your region. Check the assembly guide for the required spring dimensions to help you find ones in your area.&nbsp;Firing Video: <a target="_blank" href="https://www.reddit.com/r/3Dprinting/comments/1bu5t05/plinker_v20_boltaction_toy_blaster/" rel="nofollow noopener">Plinker V2.0, bolt-action toy blaster : r/3Dprinting (reddit.com)</a>&nbsp;Please check out the Assembly Guide PDF for parts list and assembly Instructions. Short version has identical parts requirements and assembly, some parts may appear slightly different between versions.&nbsp;Check out the Targets and Ammo box I made for the Plinker V2.0: <a target="_blank" href="https://makerworld.com/en/models/441802#profileId-347641" rel="nofollow noopener">Ammo Box &amp; Targets for Plinker V2.0 by BrewBoy - MakerWorld</a>If you enjoyed this model then you will probably like my pump-action launcher: <a target="_blank" href="https://makerworld.com/en/models/229678#profileId-265500" rel="nofollow noopener">Pump-Action Plinker (Toy Launcher) by BrewBoy - MakerWorld</a>&nbsp;DRY FIRING MAY CAUSE THE BOLT TO BREAK.&nbsp;UPDATE (APRIL 17, 2024):<ul><li>Added Raw model files for long rifle version with a telescopic stock (Print profile and additional build info coming soon).</li><li>Small Updates to Build Guide.</li></ul>UPDATE: (APRIL 26, 2024):<ul><li>Added raw model files and print profile for two new accessories: Tactical Scope 0x &amp; Angled Foregrip</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000410146/design/2024-04-25_02ebb05dd0f38.png"><figcaption>Side View - X-ray Internal Assembly.</figcaption></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000410146/design/2024-04-17_a4c948f52ba57.png"><figcaption>Best Orientation for Printing</figcaption></figure>

Plinker v2.0 (Bolt-Action Blaster)

Props

Makerspace.Online

A 3D printable Businesscard embosser, can be assembled without any hardware, everything just snaps together. I designed this businesscard embosser to be modular and 3D printable without using any support and without any hardware required to assemble. The tollerances are tight. And some materials work better then others. I have had best results using Basic PLA. Available patterns:3 Rollers available, more patterns can be found on <a target="_blank" href="https://makerworld.com/en/u/2755972568" rel="nofollow noopener">my makerworld page!</a> - Confetti - ZigZag - Polkadot Follow me on <a target="_blank" href="https://www.instagram.com/makerspace.online/" rel="nofollow noopener">my instagram</a> for updates on new patterns and uploads! Assembly:  (Pro tip: use some lubrication grease / vaseline around the gears for a better working!!) <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/2024-01-20_cca5dc6403a79.png"> Make sure to allight the bottom gears maked with the dot and allign with the stipe.  Do not forget to add some lubrication / grease between and underneath the gears! <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/2024-01-20_d2c9531e7e588.png"> For the top gears some marks are present as well to allign the gears properly! Also here! Do not forget to add some lubrication / grease between and underneath the gears!<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/2024-01-20_2b0339c954b2b.png"> Note:  This design is licensed under a <a target="_blank" href="https://creativecommons.org/licenses/by-nc-sa/4.0/" rel="nofollow noopener">Creative Commons Attribution-Noncommercial-Share Alike</a> Please do not sell this file or printed product. <a target="_blank" href="https://www.instagram.com/makerspace.online/" rel="nofollow noopener">Instagram:</a> <a target="_blank" href="https://www.instagram.com/makerspace.online/" rel="nofollow noopener"><img class="image_resized" style="width: 8.56%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/a1ec037c-99fb-4f6f-9216-f4866257bed3.png" alt="Instagram, logo, social, social media icon - Free download"></a>

Business Card Embosser - Level up your cards! 

Desk Accessories

Stephanos

<h2>NEW V2 NOW AVAILABLE!</h2><h4>Improvements:</h4><ul><li>New angled blade, allows for better ergonomics and comfort scraping at a lower angle</li><li>No supports needed</li><li>Added hole for hanging</li><li>New long handle version</li><li>Improved tolerances</li><li>Combined print profiles for Default, M3, and M3 insert versions</li></ul>STEP files for the new V2 short and long handles are also now available—&nbsp;AboutI wasn&#39;t able to find a scraper handle that I liked so I decided to make my own. Made to work with common plastic blades which can be bought and replaced for cheap. Handle allows for tool-less swapping of blades with a satisfying click in place.&nbsp;This handle makes use of the screws for the Bambu scraper that comes included with your printer. If you do not have them (or want to make more scrapers), an alternative version for M3 screws as well as M3 inserts is also provided.&nbsp;If none of the above works for you, I have additionally provided the STEP files for you to remix and customize to your liking.<h3>Notes:</h3>The new V2 blade clamp prints standing up at an angle, please ensure your bed is clean and has good adhesion prior to printing.<figure class="image image_resized" style="width: 25.59%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000201434/design/2024-03-12_a49974fae1833.jpg"></figure><h3>Assembly</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000201434/design/2024-03-19_7a698af830df4.gif"></figure>&nbsp;<h3>The Blades:</h3>Printed blades aren&#39;t as durable as the injection molded razor blades and it is much cheaper and economical to buy a pack of blades rather than printing them out which is why I have not provided a model of the blade as part of the print profile. You can find these razor blades through Amazon, AliExpress or maybe even your local home hardware store. Note it is much cheaper to buy from AliExpress, but you will need to wait for shipping. Prices and availability may vary depending on where you live.&nbsp;Amazon (Canada)<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000201434/design/2024-03-12_6413e3807416.png">AliExpress<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000201434/design/2024-03-12_7e02ec478f51b.png"><h3>Changelog</h3>2024-02-24 - Initial upload2024-02-27 - Added assembly instructions2024-03-01 - Added 0.12mm profile2024-03-12 - Upload new V2 version2024-03-19 - Update assembly animation<h3>Need to clean up flow calibration lines quickly? Larger version is also available</h3><a target="_blank" href="https://makerworld.com/en/models/207326#profileId-431134" rel="nofollow noopener">https://makerworld.com/en/models/207326#profileId-431134</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000201434/design/2024-02-26_db56680f7dbd2.png">&nbsp;

Plastic Razor/Scraper Blade Handle

Tools

fay3dlab

Since my suspended millenium falcon was such a hit.. i was motivated to make more of them..This time i made the Suspended Imperial Star Destroyer.. the ship itself is modelled by nikoli2803 from thingerverse.. the circular frame is the imperial logo itself.. the whole frame i modelled it to look like the deathstar.. everything was done using Tinkercad.. The print comes in 5 parts..<ol><li>front ship</li><li>back ship</li><li>bottom clip</li><li>top left clip</li><li>top right clip</li></ol>The ship itself comes in 2 parts.. front and back.. and there are 3 clips to hold both side of the ship together.. the bottom clip will be the stand for the whole suspended star destroyer and the 2 clips works on any side..Its a bit tricky to assemble since you cant put both parts of the ship down since its suspended on the strings..<ul><li>so my suggestion is to put the bottom clip down on a table and then put the 2 parts into the clip..</li><li>it should fit snuggly together..</li><li>once the frame can stand on its own.. you can put the other 2 clips onto the frame..</li></ul>*UPDATE*I just made a new updated V2 of the suspended star destroyer.. with adding channel for LED light strips.. <img src="https://makerworld.bblmw.com/makerworld/draft/516824/2024-01-01_bdc509315a0c2.gif">you can download the new version here: <a target="_blank" href="https://makerworld.com/en/models/117449#profileId-126250" rel="nofollow noopener">https://makerworld.com/en/models/117449#profileId-126250</a>&nbsp;When printing suspended models.. one important thing to remember is to set the wall generator to arachne from classic.. this will make the slicer print the strings..I hope you guys have fun printing this suspended imperial star destroyer..

Suspended Star Destroyer

Models

jdireen

This reusable spool sleeve isn't for adapting any other specific spool (though it may work for that, I haven't tried), but specifically has a retaining slot for the filament to clip into when winding from one spool to another, and allows for the filament to easily release when it comes to the end in the AMS.The slot is cut in at an angle to avoid the need for any support.

BBL Reusable Spool Sleeve

Printer Accessories

jaminvanderberg

Built upon the Gridfinity Storage Box by Pred, this multi-box storage system allows effortless access to multiple storage boxes while maintaining their stackability. Additionally, the modular handle provides optional portability. &nbsp;The solution also includes optional mounting capabilities for wall installation using a French cleat, although this feature has not yet been tested. &nbsp;Technically, this storage system can be used with just about any kind of storage box due to the parametric design.&nbsp;The storage system is assembled using M3 button head screws and bolts. Most makers are likely to have M3 assortments readily available; however, for those who don't, the following kit was used during the construction: <a target="_blank" href="https://a.co/d/0gfEO0l" rel="nofollow noopener">https://a.co/d/0gfEO0l</a>. This kit has ample screws for a 4-tall storage unit with plenty to spare. However, if you build multiple units, you may run start to run out of M3x6mm or M3x10mm screws and may want to pick up those sizes individually.&nbsp;<h2>What do I print?</h2>A basic storage unit requires:<ul><li>A left side panel and a right side for each box being stored</li><li>A back support plate for each box being stored, minus one. For example, if storing 4 boxes, you need 3 back support plates.</li><li>A top plate. I recommend the solid top plate with handle holes.</li><li>A bottom plate. I recommend the wireframe bottom plate.</li><li>2 feet (optional but recommended).</li></ul>Standard printing configurations should be suitable for all parts. No supports are required for any of the components.&nbsp;I printed all parts without a brim, but depending on your printer's reliability, you may find it beneficial to use a brim for added stability during printing.&nbsp;Note that almost all parts are printed with their external surface facing down on the print bed, emphasizing the importance of bed adhesion for a smooth surface finish. This also allows for the use of a patterned print bed for unique surface effects.&nbsp;<h4>Important - Multi-Level Side Panels</h4>Multi-level side panels allow you to print multiple side panels as a single, unified piece, reducing the number of components and screws needed. This design enhances overall stability and strength while utilizing slightly less filament (approximately 5g per level). Whenever possible, opt for multi-level side panels for increased efficiency.&nbsp;For general use, I suggest primarily printing the 2x side panels. I've included 3x and 4x options as alternatives, but they likely won't fit on most print beds.&nbsp;<h3>Additional Options</h3><h4>Feet</h4>While not technically required, feet are a valuable addition, especially when using the wireframe bottom. They cover the exposed hardware and help prevent scratching any surface the unit is placed on.&nbsp;For a soft, malleable foot, you can print it in TPU with 10% gyroid infill. PLA and PETG are suitable alternatives if TPU isn't available or preferred. &nbsp;Attach the feet to the bottom wireframe plate using M3x10mm screws and to the bottom solid plate using M3x15mm screws.<h4>Handle</h4>The handle is a great option for portability. To incorporate the handle, you will need to print:<ul><li>Top plate with handle holes</li><li>Handle</li><li>2 left handle mount</li><li>2 right handle mount</li></ul>The handle mounts are attached to the top plate using 8 M3x10mm screws. The handle itself requires 2 M3x30mm screws.The handle has undergone extensive testing with 4 loaded storage boxes, demonstrating considerable strength. However, I advise against using the handle with more than 4 boxes, considering that storage boxes can become quite heavy when fully loaded.<h4>French Cleat</h4>The option to mount the storage unit to the wall using a French cleat is available. However, as I haven't personally tested this feature, your input would be valuable. Please use caution when loading the French cleat mount with weight. While it should be quite strong, I haven't had an opportunity to fully test its strength.&nbsp;The French cleat mount is based on ¾" plywood (21/32", ~16.67mm). Please let me know if other sizes are required.&nbsp;Boxes full of hardware can get really heavy. You may want to consider using two French cleats. Alternatively, you can use the French cleat spacer to support the bottom against the wall, distribute the weight more evenly and reducing the strain on the mounting points.&nbsp;To utilize the French cleat, print the French cleat mount and attach it to the back. The French cleat mount is used in conjunction with the back support plates and is positioned behind them, without replacing them. Use M3x12mm screws in place of the M3x6mm screws typically used to secure the back support plates. You can use M4 flat-head screws to secure the unit to the cleat, if desired.The French cleat spacer is installed in exactly the same manner.<h4>Tip Prevention</h4>The back support plate offers the option of including tip prevention screw holes, which can be added based on user preference. These holes are not intended for wall mounting, as the back support plate is not designed for such a purpose due to its limited strength. Instead, they are intended to secure the unit to the wall and should only be used when the unit is placed on a stable surface. They functions similarly to the tip prevention mechanism commonly found in dressers. <h4>Top Wireframe Plate</h4>The wireframe top plate allows for approximately 25% less material usage. However, it does not support the use of a handle.Please refrain from using the plastic cross beams as a handle as they are not intended for this purpose.<h4>Solid Bottom Plate</h4>An optional solid bottom plate is available, although it's generally not required in most scenarios. Since the bottom isn't typically visible, the wireframe bottom plate should suffice for most purposes. However, if you prefer its aesthetic or need additional strength, the solid bottom is a viable option.&nbsp;The solid bottom is attached with M3x10mm screws if feet aren't included, or M3x15mm screws if feet are included. Please note that the solid bottom uses approximately 2.5 times as much material as the wireframe bottom.<h4>Middle Plate</h4>The middle plate is largely unnecessary. It isn't prominently visible when the storage unit is fully loaded. While it does offer added rigidity, it requires a significant amount of extra material and should not be necessary for most use cases. It is available for those who may find it useful, but it's not a strongly recommended component.&nbsp;An alternative wireframe option is also available, conserving approximately 25% of the material used.&nbsp;The middle plate is printed in two parts, the middle plate itself and the middle plate back support. The middle plate is mounted between two layers using M3x12mm screws, while the middle back plate is attached with M3x6mm screws.&nbsp;<h2>Assembly</h2>To begin assembly, start from the bottom and work your way up. Mount the left and right side panels to the bottom plate and optional feet using the appropriate-sized screws. Then, stack the side panels together using M3x6mm screws, ensuring proper orientation. Attach a back support plate between each level using M3x6mm screws. If you're using the French cleat mount, install it while fitting the back support plates.&nbsp;Installing the handle before attaching the top plate can simplify the process. Finally, secure the top plate using M3x10mm screws on the top and M3x6mm screws on the back.&nbsp;I found that installing the screws using just the bit, without the handle, worked well. The nut does most of the work, allowing you to tighten the screws sufficiently even without the extra leverage from the handle. This method can be particularly helpful for installing screws at awkward angles.&nbsp;Consider using a threadlocker on the screws, if available, for added security during assembly.&nbsp;<h2>Customizing with Parametric Design</h2>This model was created in FreeCAD using parametric design. This is done using the object ‘Parameters’ within the FreeCAD file. To adjust the Gridfinity configuration, change the parameters in the ‘Gridfinity’ section. For non-Gridfinity boxes, you can modify the box dimensions directly in the 'Box' section. You will first need to remove the formulas by pressing the = (equals) key and then pressing clear.&nbsp;If you need to modify the hardware dimensions, navigate to the 'Hardware' section. Keep in mind that a screw and nut depth greater than 2.5mm may not work well with the default 4mm floor thickness, which can be changed in the 'Secondary Parameters' section. I recommend avoiding changes to most of the other secondary parameters as they may have narrow operational limits and altering them could potentially break the model. It's best to refrain from modifying anything in the 'zCalculated' section as these calculations are essential for the model's support and altering them could lead to unintended consequences.&nbsp;Once you've determined the appropriate parameters, open the "Print Ready" folder, which contains the models pre-rotated for optimal print orientation. To export each part, click on the desired component, and select File > Export.&nbsp;<h2>Fostering Community and Modular Innovation</h2>The beauty of a modular design lies in its versatility, enabling individuals to create customized modules to suit their unique requirements.I've incorporated a range of modular options, but there's always room for more innovative ideas within our community. Let's collaborate and discover the endless potential of our collective creativity!&nbsp;

GridStack Modular Multi-Box Storage System [Parametric]

Organization

TrocheHole

<figure class="table" style="width: 100%"><table style="background-color: #f5f5f5; border: 12px solid #f5f5f5"><tbody><tr><td><figure class="image image-style-side"><a href="https://makerworld.com/models/459303" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000201311/design/2024-05-10_145eb9783fdb7.jpg"></a></figure><h3>[Information]</h3>The LID model designed specifically for the basket has also been released for this &#34;Purge Chute &amp; Basket&#34; model.<h3><a target="_blank" href="https://makerworld.com/models/459303" rel="nofollow noopener">Visit this link to download.</a></h3></td></tr></tbody></table></figure>&nbsp;<h2>Description</h2>The magnetic Chute &amp; detachable Basket for the poop purged from the X1C, P1S, and P1P.Both the Chute and Basket are easily detachable, but they are also securely attached to prevent accidental movement.The use of the Fixture (the light gray part in the photo) is strongly recommended, as it is very effective in preventing the Chute from shifting.Please also check the photos and print profile for additional information.&nbsp;&nbsp;<figure class="image image-style-side"><a href="https://makerworld.bblmw.com/makerworld/model/DSM00000000201311/design/2024-06-14_fb8010ae2dc76.jpg?image_process=format,webp" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000201311/design/2024-06-14_fb8010ae2dc76.jpg"></a></figure><figure class="image image-style-side"><a href="https://makerworld.bblmw.com/makerworld/model/DSM00000000201311/design/2024-06-14_0c093a9de20f.jpg?image_process=format,webp" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000201311/design/2024-06-14_0c093a9de20f.jpg"></a></figure>──────────<h2>Update</h2><h4>[ June 14, 2024 ]</h4><ol><li>“Fixture2”, which allows stable installation of the Chute without magnets, has been added. (*It can also be used with magnets.)</li><li>As requested, the “Extra-Short” size basket has been added.  </li></ol><h4>[ April 7, 2024 ]</h4>New sizes have been added to the basket model.<ul><li>Short</li><li>Medium (*original size)</li><li>Long</li><li>Wide</li></ul>──────────&nbsp;<h2>Printing Tips</h2>No supports are needed. But, the overhang angles of the Chute and Basket are 30 degrees.If you are using a filament that is NOT good at printing overhangs, please enable support settings yourself.&nbsp;<h2>Compatible Magnet Types (for the Chute)</h2><ul><li>DIA 13mm x T 2.5mm</li><li>DIA 12mm x T 3mm</li><li>DIA 12mm x T 2mm</li><li>DIA 10mm x T 3mm</li><li>DIA 10mm x T 2mm</li><li>DIA 8mm x T 3mm</li><li>DIA 8mm x T 2mm</li><li>DIA 6mm x T 3mm</li><li>DIA 6mm x T 2mm</li><li>No Magnets</li></ul>&nbsp;