Bambu Handy users: if you have problems with this model, expand the description and look for the Troubleshooting section below.

UPDATE: Multilingual months can now be found in a separate print profile called Language Pack. Languages include: English, Français, Español, Deutsch, Italiano, 中文, and Português. Please let me know if I've made any typos or if you have a specific language request. You can make your own month plates with MMS, but I'm also happy to provide them myself.

Printed in a variety colours reminiscent of mid-century-modern design, these little calendars would look at home on anyone's desk. Prefer a more art deco or modern look? Print in tones of silver, copper, and black.

Assembly:
- Snap-fit design
- No glue or extra hardware needed
Make My Sign: Need the months in a different language? Use Make My Sign! (see below for more info)
No AMS? I've included blank tiles that you can write the numbers on yourself. Or, you can do what @Hudsta did with fancy swapping. See their comment down below for more details (sort by newest to find it quicker).
History: these types of calendars aren't new. See About the Model below to learn some interesting facts.

Hilbert curve case: The interesting pattern of the silver case in the picture to the right was achieved using silk PLA, a smooth PEI plate, and by changing the bottom layer pattern to Hilbert Curve. All three factors are needed to replicate it. Textured plates disguise the pattern and plain PLA doesn't reflect the light (and thus the pattern), in the same way as silk does. Use the special print profile if you'd like to try it out!

Note: I recreated the end-of-month tiles found in the original 1925 calendars: Turn Slowly, Change the Month, and Patent #241137. If you prefer your calendar not to have them, I've also included blank versions without any text. You'll need to swap out tiles 15, 16, and 17.

Print Checklist ✓

After printing, you should have the following pieces:

☐ case top

☐ case bottom

☐ pivot

☐ base

☐ base drawer

☐ number tiles x17

☐ month plates x12

IMPORTANT!

If the tiles or pivot warp, see troubleshooting steps below and/or print the plates marked “with brim.”
If any part is too loose or too tight, there are alternate sizes in the print profile. If these alternative sizes don't work for you, read the troubleshooting steps below.

Assembly

IMPORTANT! You will need to remove the supports from the base (the drawer at the bottom and the channels at the top). A good sharp yank with needlenose pliers should remove them cleanly. If they are fused too tightly, you will need to calibrate your filament to reduce over-extrusion.

Troubleshooting

It's my hope that you shouldn't have any problems with the print. It's been thoroughly tested using a variety of filaments on both the X1C and the A1 Mini. However, there are always unforeseen circumstances so here are some tips on how to overcome issues if they come up.

Parts are too tight or too loose: Fit, or tolerance, of parts is highly affected by the type of filament used. If your filament creates parts that are a little too loose or a little too tight, try reprinting the part by using the appropriate plate in the profile. There are tighter and looser plates for the case, the drawer, and the trim. If these alternative sizes don't work, you will need to adjust the X-Y contour compensation further and re-print. If the part is too loose, you can always use a bit of superglue to keep the pieces together. Just be sure that you've verified that the numbers iterate correctly in the case before gluing it together!
The pivot looks deformed: The round ends of the pivot have a very small footprint. Sometimes they will peel up on textured plates because it's too small to properly stick to the bumpy surface and/or the plate is dirty. For this reason, I recommend using a smooth plate to print it. If you don't have a smooth plate and/or the pivot deforms no matter what you do, reprint it with a brim (included in the print profile). Note: if the pivot deforms no matter what you try, it may still function even if it looks wonky. Fortunately, it's not visible so its less-than-perfect look won't be noticeable. If you have further difficulties regarding the pivot, please see the comments below for more information on additional troubleshooting steps you can take.
The tiles warp/peel up while printing: I've read reports of peeling/warping tiles on the A1 series of printer. Unfortunately, unenclosed bedslinger style printers can be more susceptible to this problem due to uneven cooling (when the layers above the first layer cool too quickly they contract and warping occurs). A high temp smooth PEI plate will provide better adhesion in this case. However, if you don't have one or the tiles peel no matter what you do, try printing the tiles with a brim. There will be additional clean-up to remove it. How much will depend upon the filament used. Some brims detach cleanly and some will fuse more strongly. Go carefully and try to make it as smooth as you can.
Parts came loose from the bed: There are many reasons why this may happen. These are just some of the reasons and suggested solutions.
- Correct plate: Check that the correct plate is selected in Studio. My print profiles use a textured bed but if you're using something else, you'll need to change it.
- Bed is dirty: Even if it might appear to be “clean,” dirty beds are the number one reason for adhesion failure. Wash in sink with warm water and plain dish soap. Don't touch the surface of the plate with your skin; move it by your fingertips and be careful not to brush it when removing prints. Skin oils transfer quickly and can cause parts to peel off. If it's been awhile since your last wash, you might want to do it again before attempting to print the number tiles. You can maintain plate cleanliness by wiping between prints with a clean lint-free cloth and 99% isopropyl alcohol.
- Filament: wet filament, old filament, and just some filament in general can cause adhesion problems. Drying the filament or trying a different roll can sometimes help. If the filament is new and dry, try bumping up the plate temperature in the filament profile by 5 degrees to a maximum of 65 for PLA.
- Cooling: if your printer has an auxiliary fan, edit your filament profile to turn it off (set it to 0). Uneven cooling on flat parts can cause them to lift.
- Glue: Gluestick can help stubborn parts stick to plates. Even though it's not generally used with textured plates, it may be necessary, especially with small-detail models such as the number tiles.
- Plate type: if the models keep stubbornly lifting off of the textured plate, try a flat plate instead. This tip is especially for unenclosed printers where ambient air temperature can cause uneven cooling. The nature of textured plates means that small detail items such as the number tiles, don't have as much sticking force and can be the most susceptible to lifting. Smooth PEI plates work better for small detail items because they have 100% contact with the part.
- Brim: If all else fails, or you'd rather not go through the trouble of the above steps, print the plates marked “with brim.”
Tiles don't slide: Occasionally, a tile won't slide into place due to friction or the previous tile leaning too far forward. If this happens, use your finger to keep the previous tile in place and then give the case a little wiggle. The tile should slide into place. However, if the surface of the tiles feel rough, they won't slide very well and you'll get more fails than successes. I've tried to mitigate this with slicer settings but there are too many factors for me to be 100% certain my profiles will work with your filament. So how to fix it? The easiest way is to decrease the "top layer extrusion" value and reprint. The longer way is to calibrate your filament using Bambu Studio and then reprint.
Number tiles have colour bleed: Whether or not colour bleed occurs is due to the opacity of the filament that was used to print it. White filaments are particularly susceptible to colour bleed as they can show colours from layers below. You can either live with the effect, try a different colour combination (i.e., white numbers on a black tile) or you can try a different manufacturer with the caveat that their filament may give you the same result. If you really want black numbers on white, a matte white filament might give you the colour bleed barrier you seek. I found that Eryone matte white did the trick but can't vouch for other manufacturers.

Customize Month Plates

Create your own month tiles in the language of your choice using Make My Sign. Font is NotoSans, the base plate thickness is 1mm, and the text thickness is 1.6mm.

Recommended Print Settings

All my 3mfs have my recommended print settings. They're listed here with an explanation of why I chose them.

Global

Detect thin walls: On (to capture all the character details)
First layer speed: 15 mm/s (better adhesion/reduces the chance of first layer being dragged; needed to be global to target number/month plates)

Tile Case

Plate type: Textured PEI (highly recommended due to surface finish)
Layer height: 0.2mm (don't change as it can cause the tiles not to slide correctly or the case not fit together properly)
Only one wall on top surfaces: Not apply (strength by maintaining wall count is more desirable than surface quality)
Wall loops: 4 (strengthens the part)
Sparse infill pattern: Gyroid (my preferred infill; change if you like)
Outer wall speed: 50 mm/s (better outside finish and helps strengthen the part)
X-Y contour compensation (tigher/looser plates only): +/-0.05mm

Base and Drawer

Plate type: any plate
Layer height: 0.2mm (don't change as it can cause the month holder not to fit)
Only one wall on top surfaces: Not apply (better surface quality; not having it on created weird bubbles on the slanted areas)
Sparse infill pattern: Gyroid (my preferred infill; change if you like)
Outer wall speed: 50 mm/s (better surface finish)
Support: enabled (there is an overhang at the bottom for the drawer and at the top for the axle to slide into)
Support style: Snug (necessary as otherwise it will create a very tall and unnecessary support structure on either side of the pillars)
X-Y contour compensation (tigher/looser plates only): +/-0.05mm

Pivot

Plate type: Smooth PEI (highly recommended to reduce chance of warping)
Layer height: 0.08 (necessary to reduce deformation)
Wall loops: 4 (strengthens the part)
Sparse infill pattern: Gyroid (my preferred infill; change if you like)
Brim Type ("with brim" plate only): Outer and inner (for particularly stubborn peeling parts)

Number Tiles

Plate type: Textured PEI (highly recommended due to surface finish)
Layer height: 0.2mm (don't change as it can cause the tiles not to slide correctly)
Wall generator: Arachne (helps fill in the letters and numbers better)
Order of walls: outer/inner (helps prevent first layer from dragging)
Top surface flow ratio: 0.98 (rough top surfaces will prevent the tiles from sliding properly)
Only one wall on first layer: On (better quality of text and it's less likely to drag)
Sparse infill density: 100% (tiles need to be solid to be of sufficient weight to slide)
Sparse infill pattern: Rectilinear (needed for 100% density)
Infill/wall overlap: 10% (better surface quality to reduce top layer roughness)
Brim Type ("with brim" plate only): Outer and inner (for particularly stubborn peeling parts)

Month Plates

Plate type: any plate
Layer height: 0.2mm (don't change as it can cause it not to fit into the holder)
Wall generator: Arachne (helps fill in the letters and numbers better)
Sparse infill pattern: Gyroid (my preferred infill; change if you like)

About the Model

Sliding tile perpetual calendars are not a new design. The "original" as near as I can determine was made in England by a company called Velos Ltd. sometime in the 1920s. As to the inventor, interestingly there appears to be two gentlemen who filed patents in the US for very similar calendars. There are differences in their designs, but the core concept – sliding tiles – was shared between them.

The first to file patent was William C. Hiering, as evidenced by this newspaper notice from 1927. The notice describes one of the calendar's uses as an “advertising medium of unusual merit.” Based on the examples I found while researching, this secondary use was indeed utilized. I've found examples with logos and names for a variety of companies including Rover and Tampax.

To the right, you'll see a delightful flip calendar in the art deco style which is what originally inspired me. I instantly fell in love when I first saw it. It reminds me of old industrial machinery found in workshops and factories. Not only that, but I was fascinated by how it magically changed the date whenever it was rotated.

Aside from pictures, I had little else to go on until I came across this Imgur post by Measured Workshop which revealed that it was not magic, but rather a clever mechanism that used sliding tiles.

Thanks to this helpful article and the original patents (patent 1, patent 2), I was able to reverse engineer the concept and create my own version using trial and error to get the dimensions just right. The case construction, the pivot, the stand, and the drawer are of my own devising. I decided to use interchangeable name plates so that other languages can be substituted easily. Lastly, as a nod to the calendar's history, I echoed the shape of the tile box and the words on the original tiles.

N.B.: I started work on this model the day after Christmas. It's taken me this long to refine the design, thoroughly test it, and then prep it for publication. While this isn't the “first” sliding tile calendar published, its creation started before the contest began.

Filaments used in printed models:

Polyterra Pastel Matte PLA: Watermelon, Banana, Mint Green, Ice, and Sapphire Blue
Bambu Basic PLA: white and black
Hatchbox PLA: cool grey and orange
Eryone Silk PLA: silver
Spectrum: Spicy Copper

How to Support Me

If you like what I make, I would love it if you would please click the like button and/or download a print profile. If you really like what I make, then please consider buying me a coffee. Thank you so much!

Licensing

These models are non-commercial and may not be sold, reproduced, or shared outside of this website. However, I will consider an individual license fee if you wish to sell printed models in your local area such as at a craft show. Please contact me for details.

Changelog

January 24, 2024

Added note about how non-AMS users could achieve multi-colour tiles. Thanks to @Hudsta for sharing!

January 15, 2024

Added two variations of case (tighter and looser)
Added “with brim” plates for number tiles and pivot
Updated/reorganized troubleshooting guide
Updated/reorganized print settings guide

January 14, 2024

Added two variations of drawer (tighter and looser)
Separated languages into their own profile
Added language support for 中文, and Português
Updated Pivot troubleshooting guide

January 12, 2024

Removed un-necessary print profiles
Removed duplicate print settings and corrected typos
Updated troubleshooting to include more tips for printing
Added language support for Deutsch and Italiano
Updated assembly image to fix error (thank you @riceball for catching it!)
Updated .3MFs to remove support from drawer (thank you @till.kristoffer for catching it!)

January 11, 2024

Updated the title photo

January 10, 2024

Typo fixes
Updated cover photo
Changed model name (too many other calendars with the same name!)

January 9, 2024

Initial upload

January 6, 2024

Design finalized
Creation of publication assets begins

December 26, 2023

Prototyping begins

Things I want to print