hgwells

LinkDesigns

This is a stackable shelf system designed to be easily printable, robust, and filament efficient. Stack your shelves vertically or horizontally and free up space on your desk! The design prints without support and is easily assembled with no glue or screws. There are two trays available: A standard tray for the “floor” of each shelf, and a top tray that blends nicely onto the uppermost shelf for a better look. I am looking forward to modifying and adding on to this design to make it as useful as possible, so if you have any feedback let me know!<figure class="image image_resized" style="width:61.06%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000426986/design/2024-04-13_5504ad36c316c.gif"></figure>&nbsp;Update V1.1 - 4/19/24<ul><li>Wall mounting holes added to shelf for more placement options</li><li>Tray walls thickened to improve durability</li><li>Small adhesion / anti-warping changes made to shelf </li></ul>Thank you all for the feedback and suggestions!

Stackable Shelf Organizer

EPIQ3D

Make All your herbs easy in the kitchen.This planter ensures that your herbs stay fresh and hydrated.If you dont yourself use fresh herbs, i know this will be a great gift for those who do.&nbsp;<figure class="image image_resized" style="width:89.55%;"><img src="https://makerworld.bblmw.com/makerworld/draft/863886/2024-04-09_f6ffd46161a02.png"></figure>&nbsp;The Design is made to be as simple as possible, and blend into any kitchen aesthetic.There a two different patterns, because i could&#39;nt decide witch i liked best.So why not upload both of them :)&nbsp;<h3>HOW IT WORKS</h3>The self watering planter is designed to slowly absorb water from the reservoir (This needs to be filled up occasionally).Its a one piece print (uni body) with a clear and visible water reservoir, so you dont need to lift a inner pot, or rely on a floater to tell you how much water is left.&nbsp;Simply just look in the in the reservoir, and fill it up if needed.&nbsp;<figure class="image image_resized" style="width:88.82%;"><img src="https://makerworld.bblmw.com/makerworld/draft/863886/2024-04-09_d7e73f43dae5c.png"></figure>&nbsp;There are 3 water inlets to the center, where it is recommended to use a wicking material at the bottom.This helps to absorb water into the soil slowly. You can place a couple of cotton balls / cotton wool in the bottom of the pot.I recommend filling wicking material so it is above the reservoir edge, then fill with soil, and your herb of choice.&nbsp;<figure class="image image_resized" style="width:88.79%;"><img src="https://makerworld.bblmw.com/makerworld/draft/863886/2024-04-09_ec6f3714a17fa.png"></figure>The water inlets has a light slope towards the center, so all the water is utilized&nbsp;&nbsp;UPDATE - I have added a funnel, for making it easier to fill soil in the planter, without spilling soil in the water reservoir.&nbsp;<figure class="image image_resized" style="width:52.95%;"><img src="https://makerworld.bblmw.com/makerworld/draft/863886/2024-04-16_31e6442045a85.png"></figure>&nbsp;Basic print settings:<ul><li>Infill : 10%</li><li>Walls: 3</li><li>Top/bottom shell layers: 3</li><li>No support needed</li></ul>Dimensions: Soil area has a diameter of 80 mm, and a total hight of 108 mm.

Self watering Grail planter

Practical

filete3d

Airless Tennis Ball version 1.1. Tested and approved! &nbsp;After several tests, we concluded that the geometry presented in this model is the one that performs the best with the given materials.&nbsp;The conclusions on recommended materials show that to achieve impact resistance it must be printed on flexible materials with a certain level of hardness to keep bounciness.&nbsp;The best material to print this ball is TPU 98A since it gives a bounce similarity to the real one. (Almost 50% from the drop distance)PLA Flex also gives a bounce similar to the official one but can be seen some cracks after a while of use. (We are testing a new mesh redesign for this material in particular).TPU 95A resists impacts without breaking but has a bounce reduced to approximately 20%.&nbsp;PLA or PLA+ will work only for displaying purposes. We do not recommend using these materials if you want to make it bounce as it can break easily.&nbsp;v1.1 Fixed seam line detail to enhance bevel from hex mesh.&nbsp;V2.0 already uploaded!, check it out here: <a target="_blank" href="https://makerworld.com/en/models/253687#profileId-270125" rel="nofollow noopener">https://makerworld.com/en/models/253687#profileId-270125</a>&nbsp;Check my current state on airless balls:Airless Ping Pong ball <a target="_blank" href="https://makerworld.com/en/models/386079#profileId-286461" rel="nofollow noopener">https://makerworld.com/en/models/386079#profileId-286461</a>Airless Tennis Ball v2.0 <a target="_blank" href="https://makerworld.com/en/models/253687#profileId-270125" rel="nofollow noopener">https://makerworld.com/en/models/253687#profileId-270125</a>Airless Baseball Wiffle Softball Ball v2.0: <a target="_blank" href="https://makerworld.com/en/models/227359#profileId-244997" rel="nofollow noopener">https://makerworld.com/en/models/227359#profileId-244997</a>Airless Basket , Soccer, Voley or Handball Ball v1.2: <a target="_blank" href="https://makerworld.com/en/models/223189#profileId-241192" rel="nofollow noopener">https://makerworld.com/en/models/223189#profileId-241192</a>Airless Golf Ball: <a target="_blank" href="https://makerworld.com/en/models/383904#profileId-284030" rel="nofollow noopener">https://makerworld.com/en/models/383904#profileId-284030</a>&nbsp;&nbsp;&nbsp;

Airless Tennis Ball v1.1

Challenges

theJJM

Imported from Thingiverse I am not the original author. I will make a profile for it to be printable via the phone app. 12/7/2023: Updated a print profile to have only supports on the build plate. Imported the <a target="_blank" href="https://makerworld.com/en/models/86354#profileId-92262" rel="nofollow noopener">Ocarina Stand</a>.

Updated 12 Hole Ocarina

Misc/fun

FunTuan

Securely holds four Bowden tubes and one control line to prevent entanglement and ensure smooth filament extrusion.&nbsp;<h3>Other Bowden Holders:</h3><h4>4-in-1 Bowden holder （bundling）A1/A1 mini </h4><a target="_blank" href="https://makerworld.com/en/models/110918#profileId-118570" rel="nofollow noopener">https://makerworld.com/en/models/110918#profileId-118570</a>

5-in-1 Bowden holder（bundling）A1 / A1 mini 

A1 parts

paglini.mike

This model has been carefully designed to look great with 4 colors. This is an easy to print 4 color Filament painting to add to your décor.Only filament swaps! No AMS necessary.&nbsp;This does not need an AMS to print, but it does make it easier. If you have an AMS, print directly from the provided print profile.If you don't have an AMS, open and slice in the Bambu Studio or any Slicer app and add pauses at the provided layer heights for filament swaps._____________________________ Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Red At layer #14 (1.2mm) swap to Grey At layer #16 (1.36mm) swap to Beige or White for the rest.

Geisha_ 4 Color Filament Painting

Hueforge

Brent Peterson

<h2>Toroidal Launcher</h2>This is an original design created for the <a target="_blank" href="https://makerworld.com/en/contests/5" rel="nofollow noopener">Flying Objects design contest</a> and features a handheld three-stage planetary gearbox that launches a toroidal ring over 3000 RPM! The design is 100% 3D printed; all pieces press fit together and no additional hardware is required.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/360322/2023-12-15_92eaaa9691a14.gif"></figure>The gearbox used in this design is modular and will be released as it's own series soon™, if you have any thoughts or feedback please share so I can continue to improve the design!<h3>Modifications and Add-on Designs</h3><ul><li>[NEW!] Remix Templates<ul><li><a target="_blank" href="https://makerworld.com/en/models/123219" rel="nofollow noopener">Threaded cap</a></li><li><a target="_blank" href="https://makerworld.com/en/models/125073" rel="nofollow noopener">Hexagon gear driver</a></li></ul></li><li>Gearbox modifications<ul><li><a target="_blank" href="https://makerworld.com/en/models/99992#profileId-106623" rel="nofollow noopener">High torque conversion kit (1:2 ratio)</a></li><li><a target="_blank" href="https://makerworld.com/en/models/105586" rel="nofollow noopener">1:3 ratio gearset</a></li><li><a target="_blank" href="https://makerworld.com/en/models/108803" rel="nofollow noopener">1:4 ratio gearset</a></li><li><a target="_blank" href="https://makerworld.com/en/models/105590" rel="nofollow noopener">1:5.5 ratio gearset</a></li><li><a target="_blank" href="https://makerworld.com/en/models/110188" rel="nofollow noopener">1:7 ratio gearset</a></li></ul></li><li>Toroidal ring designs<ul><li><a target="_blank" href="https://makerworld.com/en/models/102279" rel="nofollow noopener">Toroidal Launcher Mini Rings - 100mm pitch</a></li><li><a target="_blank" href="https://makerworld.com/en/models/97633" rel="nofollow noopener">Toroidal Launcher Mini Rings - 150mm pitch</a></li><li><a target="_blank" href="https://makerworld.com/en/models/102728" rel="nofollow noopener">Toroidal Launcher Mini Rings - 200mm pitch</a></li></ul></li></ul><h3>Specifications</h3><ul><li>Three stage planetary gearbox with 1:48 gear ratio (overdrive)<ul><li>0.75mm gear module for ultra-smooth performance (24/72 teeth)</li><li>10mm hex driver for connecting gear stages</li></ul></li><li>Toroidal ring design with four blades (1.2mm thick) available in three sizes<ul><li>100mm diameter, 150mm pitch</li><li>125mm diameter, 175mm pitch</li><li>150mm diameter, 200mm pitch</li></ul></li></ul><h3>Printing tips</h3><ul><li>All prints pictured were printed using Bambu Basic and Matte PLA</li><li>For best results run flow rate calibration and thoroughly clean build plate</li><li>The launcher gears are available in two print profiles with the following changes to the standard 0.20mm profile:<ul><li>Arachne wall generator</li><li>5x top and bottom walls, 25% infill</li><li>75 m/s inner and outer wall print speed</li></ul></li><li>The toroidal rings are available as a single print profile with the following changes to the standard 0.20mm profile:<ul><li>0.6mm line thickness, Arachne wall generator</li><li>75 m/s inner and outer wall print speed</li></ul></li><li>The launcher housing prints with the standard 0.20mm profile.</li></ul><h3>Launcher Parts</h3><ul><li>Launcher Gears<ul><li>SunGear24.step [3x]</li><li>PlanetGear24.step [9x]</li><li>PlanetCarrier24.step [3x]</li><li>RingGearDouble.step [1x]</li><li>RingGearLid.step [1x]</li><li>RingDriver.step [1x]</li><li>GearDriver.step [1x]</li></ul></li><li>Launcher Housing<ul><li>HousingBase.step [1x]</li><li>HousingRingLid.step [1x]</li><li>HousingCarrierHolder.step [1x]</li><li>HousingCarrierThreads.step [1x]</li></ul></li><li>Toroidal Rings<ul><li>ToroidalRing100.step [1x]</li><li>ToroidalRing125.step [1x]</li><li>ToroidalRing150.step [1x]</li><li>ToroidalRingDriver.step [1x]</li><li>ToroidalRingLauncher.step [1x]</li></ul></li></ul><h3>Launcher Assembly (Gears + Housing)</h3><ul><li>Assembly the planet carrier with three planet gears and one sun gear as shown below. Repeat for all three planet carrier assemblies.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/360322/2023-12-31_efae722ebe2db.gif"></figure><ul><li>Use the shorter hex drive to connect two sets of gears. Align both planet carriers and hold them with one hand while holding the double ring gear in the other hand and slowly turning as you close the gear; once closed insert the assembly into the main housing to hold secure. The gears should spin freely; if they don't remove the gear assembly and repeat this step.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/360322/2023-12-31_f1371c6d57ee6.gif"></figure><ul><li>Use the longer hex drive to connect the last set of gears and then assemble with the threaded cap as shown below.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/360322/2023-12-31_4926c45fbbf51.gif"></figure><ul><li>Carefully mesh the single ring gear with the planet gears taking note of the 2mm flat section that is positioned towards the main gear assembly as shown below. Use the same method of rotating while slowly closing and covering with the cap to hold secure.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/360322/2023-12-31_54c6fffceb4e5.gif"></figure><ul><li>Done! The assembly should spin smoothly with the output shaft making 48 rotations for every one turn of the input knob. Performance depends on printer tolerances and filament used; for best results use the include print profiles with Bambu Studio (supports many different printers). A bit of lubricant can also be added to the gears to improve performance.</li></ul><h3>Toroidal Ring Assembly</h3><ul><li>Insert the hex drive into the interlocking driver; the clearance is tight but it should be a snug fit.</li><li>Insert the assembled driver into the output sun gear, the fit should be the same.</li><li>If the driver does not stay secured when launching the ring a small amount of CA glue can be use.</li></ul><h3>Changes</h3><ul><li>v1<ul><li>Initial release; files now available in v1old folder</li></ul></li><li>v1.1<ul><li>Updated print profiles with improved settings for gears and rings</li><li>Improved single color print profile, fits on A1 mini and objects are laid out to allow skipping</li><li>Improved clearance of gears and overall meshing</li><li>Updated toroidal ring to use the same launcher as the mini rings<ul><li>Print profile includes 3 sizes (100mm, 125mm, 150mm)</li></ul></li><li>Updated assembly instructions to have fewer steps with a GIF for each one</li></ul></li><li>v1.1.01<ul><li>Added new section for template designs intended for remixing</li></ul></li></ul>

DnD

Practical

Challenges

Misc/fun

A1 parts

Hueforge

Mechanisms