Hexavalent

AMS Lite Saver Snag Cutter V0.1 <EXPERIMENTAL>

AMS Saver Snag Cutter V1.3.4

AMS Saver Snag Cutter V1.3

All Bulb and Spring Designs, Standard Quality

All Bulb and Spring Designs, High Quality

All Bulb and Spring Designs, Best Quality

Hanging Bulb Decorations

All Original Ornament Designs

Single, Full, and Very Few Spirals

Single, Full, and Few Spirals

Single, Full, and Many Spirals

Double, Full, and Very Few Spirals

Double, Full, and Few Spirals

Double, Full, and Many Spirals

Double, Hollow, and Few Spirals

Double, Very Hollow, and Many Spirals

Double, Hollow, and Many Spirals

Perfect Scale

All Designs, A1 Mini, 0.2mm layer

Spiral Christmas Ornaments

0.2mm layer, 2 walls, 15% infill

Wall-Mounted Pen Holder

Ultimate Respool Mini

Lightweight design. Recommended for stronger materials.

Strong design. A good balance between weight and strength.

Solid design. Recommended for weaker materials.

Jigsaw Puzzle Art Box Stand

Minimal Key Tag

0.2mm layer, 3 walls, 15% infill

Trammel of Archimedes

Jack

T8 spindle cleaner

0.2mm nozzle, 0.08mm layer, 2 walls, 15% infill

this printed well except for the ironing which made a bit of a mess. a quick pass with a debrain tool and it looks great. if I were to print it again I would disable the ironing.

VkvitV

Lead Screw Cleaner

0.16mm layer, 3 walls, 15% infill

It printed well minus a tiny bit of lifting off the plate on the handle. that could have easily been my build plate being dirty though. I was unable to get it to snap into place like it's designed to. one jaw kept wanting to lift above the other and they would not line up properly. maybe messing with the scale would have helped, but I didn't have the patience for it.

OBLA

Print-in-Place Toothbrush Head Protector

0.12mm layer, 3 walls, 15% infill

I can tell a lot of care went into this design, and it printed great. Exactly what I was looking for! My only suggestion is that the clasp engages a little bit more for a bit more security when it's bouncing around in my travel bag.

PenolopyBulnick

Rupee Earring

One pair, regular print, 0.2mm layer, 2 walls, 15% infill

this is a great model that turned out wonderfully! My wife absolutely loves them!

Joywent

Multifunctional clip with lock V2 - Print in place

XL size

this printed great using PTG-HF. I was a little worried that some of the overhangs would diffuse to the previous layers, but it took very little force to break it free.

3dnetic

Flexi Cornish Keychain - Longer Version

0.2mm layer, 6 walls, 15% infill

I really need model, but it was really difficult to free up. I found that separating the pieces using diagonal cutters worked the best. working your way in circles level by level from the top down with the flat part of the cutters facing down seem to be the sweet spot.

Eternity Labs

Infinity Gyro Spinning Card - Print in place

Print in Place

works great! freed up with no issues. just I was expecting. 

kojimon

A somewhat different Fidgetcube or AsdF

Cool Design! It printed decently, but I ended up breaking one of the connectors trying to free it up. The connectors that really gave me problems were the horizontal pins at either end of the model. Increasing the clearance by a tad might free it up better.

Sanja 3D

Spinning dual geared fidget clicker Print-in-place

0.16mm layer, 2 walls, 40% infill