hersamq

Josh-3D

[Introduction]6/27/2024 - I just wanted to say thank you to everyone that has downloaded and printed the shuffler! I&#39;ve had a few bumps in the road, and a few bugs to work out. I appreciate you all, the comments, the suggestions, and I&#39;m sorry for any of the issues caused by trying to get these early bug fixes and everything out there. It&#39;s like my own little No Man&#39;s Sky! My personal A1 Launch, haha. &nbsp;I had to adjust the model for sleeved cards, and I realized that might have caused some troubles for those that might have started printing the original one and then tried switching to the updated version. If it makes you feel any better, I&#39;ve got a whole pile of parts from upgrading the ones I made prior to my o-ring fix. &nbsp;I&#39;ve updated the instructions with some written notes to help clarify the assembly where needed. Hopefully I&#39;ve covered everything. &nbsp;I&#39;ve updated the BOM to include the o-rings properly for when you go to buy the parts from Maker&#39;s Supply. &nbsp;6/23/2024 - Minor Update. I had updated the profiles, but the X1/P1/A1 Profile didn&#39;t get updated correctly, it appears. I&#39;m very sorry about this. I&#39;ve just updated it and verified. If you want to make sure you have the latest, it&#39;s simple; the original had a plate for the TPU rollers all their own, but in the new profiles, they are part of the plate with the shafts since they are PLA now, with O-Rings. &nbsp;6/22/2024 - Big Update! I adjusted the model to accommodate sleeved cards. I had to ditch the TPU rollers. They worked for the most part for un-sleeved cards, but weren&#39;t perfect. For sleeved cards, it was no good. Luckily for me, Bambu started to carry O-rings on the Maker Supply, and Bob&#39;s your uncle, we&#39;re in business. It&#39;s much better. As much as I wanted to like TPU rollers, they were just still too smooth. I&#39;ll update the BOM section fully once I can link to the Maker&#39;s Supply entry for the o-rings. They are easy to find elsewhere too though like on amazon, or even your local hardware store for that matter. &nbsp;This update has a slightly longer base, so all the mid sections are a little longer. Ends/gears all stay the same. It&#39;s been working well for sleeve and unsleeved cards for me, in the Skip-bo to regular playing card size. Should be able to handle things like MTG and your other beloved sleeved card games. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497170/design/2024-06-22_250e879bcf392.png"></figure><figure class="media"><oembed url="https://www.youtube.com/watch?v=d2rctBx6R20"></oembed></figure>I haven&#39;t been to keen on the card shufflers available commercially, and feel most of the ones designed for 3d printing don&#39;t really elevate themselves to a consumer level product. Thus, this card shuffler was born. I wanted something stylistic, and not just functional. Inspired by old printing presses, with those cast iron frames. Although, it looks a bit like a boiler too, I&#39;d say.&nbsp;Sized for standard playing cards. (64x89mm + plus sleeves, or there abouts, is the max size card it&#39;ll shuffle). I sized it to be able to shuffle a full skip-bo deck, which is 160 cards. It can do about 80 sleeved cards, in testing. Might have to make an extra tall version for bigger decks and big sleeved decks! &nbsp;It&#39;s been running smoothly for me, especially since upgrading to O-rings. The grip on them is much better than the original TPU rollers. There are occasional jams that happen, when the cards don&#39;t fall right. I think as long as you aren&#39;t going too slow and keep a good pace, usually it&#39;s fine. Sometimes it helps to shift the whole thing back and fort slightly to shake the cards loose and get them to settle. &nbsp;[Hardware Required]&nbsp;Featured FilamentsBambu PLA Metallic Iron GrayBambu PLA Metallic Copper BrownBambu PETG-CF Brick Red&nbsp;Bambu PLA Galaxy NebulaBambu PLA Glow GreenBambu PLA Metallic Copper Brown&nbsp;Bambu Matte Grass GreenBambu Marine BlueBambu Lemon Yellow&nbsp;Notes about PrintingAs Noted, you&#39;ll want TPU for the pads. At least that&#39;s what I designed and set them up for. I also set them up to use fuzzy skin, to hopefully give a little more texture to grab onto the cards. &nbsp;I highly recommend using a smooth PEI bed. (It&#39;s not required, and you can absolutely print the whole thing on your bed of choice. I just highly recommend the Smooth PEI bed for PLA because it holds well, and for smaller parts with a thin profile on the bed, it tends to hold much better. Like the spacers I use in step 4.)&nbsp;Hardware Required :36x M2.6x8mm Self Tapping Screws (Bambu&#39;s BT2.6x8mm self tapping screws) (From the <a target="_blank" href="https://us.store.bambulab.com/collections/self-tapping-screws/products/bt2-6-socket-head-cap-self-tapping-screw-shcs" rel="nofollow noopener">Bambu US Store</a>)9x MR128 Ball Bearings (inner = 8mm, outer 12mm, height = 3.5mm, such as <a target="_blank" href="https://www.amazon.com/uxcell-MR128-2RS-Groove-Bearings-Double/dp/B082PPLHLQ" rel="nofollow noopener">this one from Amazon</a>, or from the <a target="_blank" href="https://us.store.bambulab.com/products/steel-deep-groove-ball-bearings?variant=42104893243528" rel="nofollow noopener">Bambu US store</a>)4 O-Rings OD 24x2.5mm  ( From the <a target="_blank" href="https://us.store.bambulab.com/collections/makers-supply/products/o-rings?variant=42561621753992" rel="nofollow noopener">Bambu US Store</a>)&nbsp;[Upgrading from the TPU Roller version]<figure class="image image_resized" style="width: 51.3%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497170/design/2024-06-22_ca78189d57b3b.png"></figure>If you&#39;ve already printed the card shuffler, but want to upgrade, please refer to the above graphic for the parts you&#39;ll need to reprint. Make sure you print 2 of the axels, pad drums, and the card holder/bracket. In addition you&#39;ll need two extra screws to secure the drums to the axels, and the 4 O-rings. &nbsp;If all you want to do is upgrade the pad drums, then you should be able to slide them on the original axles, however be aware that they aren&#39;t secured with friction like the TPU pads were, so you might need to glue them or use some other method to fix them once installed, if the fit is too loose. The new axels are slightly longer, but also have a hole for a self tapping screw to tap into. &nbsp;&nbsp;[Assembly]<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497170/design/2024-06-15_2b08e90375684.png"></figure>Step1: Screw the end plates on. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497170/design/2024-06-15_1adb06ad5af73.png"></figure>Step2: Assemble the two side card holders, then slot them in and screw them into the main body. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497170/design/2024-06-22_b1c84149db724.png"></figure>Step3: <ul><li>Install the o-rings onto the two drums.</li><li>Install the bearing on the end of the shaft and then screw the end cap into place to keep it secure. </li><li>Insert the drum into place, and then insert the shaft through the drum and the main body. Install the set screw to set the drum into place.</li></ul>(Caution: Do not overtighten! Loosen screw a little of bearings bind)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497170/design/2024-06-15_425faf6ab974b.png"></figure>Step4: <ul><li>Insert the bearings onto the shafts, followed by the spacer and then the gear. Make sure the bearing is fully seated.</li><li>Make sure the gears are orientated right. The Arrow pattern on the gear should point in the direction of travel. Inward! </li><li>Screw the gears into place. </li></ul>(Caution: Do not overtighten! Loosen screw a little if gears bind)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497170/design/2024-06-22_d5066862b49a4.png"></figure>Step5:<ul><li>The Tricky part</li><li>For each gear there is a gear peg and the bearing. Insert the bearing into the end plate, and insert the gear peg into the gear. Make sure the gears are fully seated.</li><li>I insert the small gear and then the large one. With the large one I try and angle it in a little, and use a little force to jam it into place. </li><li>You&#39;ll want to try and rotate the pads so the flat ends are opposite each other before installing the large gear. </li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497170/design/2024-06-16_928514e5c2088.png"></figure>Step6: Insert the bearings into the gear bracket and make sure they are fully seated. Screw the bracket into place. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497170/design/2024-06-16_5e459d17a32f3.png"></figure>Step7: <ul><li>Insert the bearing into the crank arm, and then sandwich it between the peg and knob, and secure it with a screw. </li><li>Screw the crank arm onto the large gear&#39;s shaft with an end cap to help keep it secured. </li><li>Shuffle some cards! </li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497170/design/2024-06-15_9c88d6ec0f9ee.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497170/design/2024-06-15_c4986513a4b3f.png"></figure>&nbsp;-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you&#39;re looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information. on.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Card Shuffler

Games

pbbence1994

My next kit card is based on the famous P51-D Mustang warbird. Looks Best with silk silver filament. Cut the parts out with pliers, nail sissors or hobby knife. The assembly is easy and self explanatory. The parts should fit together tightly, but you can always use a bit of super glue to secure the parts together. If you don't need the frame I uploaded the model without it. Please keep in mind that the fine texts and details require very fine lines on the first layer so you need perfect bed adhesion. I recommend to use some adhesion spray like 3dLac. Stay tuned for more kit card planes! Have fun printing it!

Plane Kit Card (P-51D MUSTANG)

Kit Card

A headphone stand with industrial styling!&nbsp;I have my previously designed stand, but it's not always suited for larger headphones. I also wanted something a little more industrial styled, and thus managed to come up with this.&nbsp;Model is featured in Bambu PLA Matte Charcoal and Bambu Iridium Gold Metallic. A good alternative with similar look to Bambu's metallic is Hatchbox's Metallic line. There might be others, but that's the one I'm aware of.&nbsp;[Spotlight]Check out this <a target="_blank" href="https://makerworld.com/en/models/198355#profileId-218961" rel="nofollow noopener">PS5 Headset focused remix</a> by <a target="_blank" href="https://makerworld.com/en/@JJDeluxeDesigns" rel="nofollow noopener">Johan Jamaer - JJ Deluxe Designs</a>! &nbsp;[Tools & Assembly]&nbsp;Assembly is pretty easy. You'll need the following hardware and tools.M4x10 - 2M4x16 - 4 M4x20 - 4 M4x25 - 4 M4x40 - 4 M4 Nuts - 16Hex DriverDrill bit for clearing holes&nbsp;For the screws, I am using M4 Socket head cap screws. If you don't have M4 screws on hand, I would recommend purchasing an assortment kit, like <a target="_blank" href="https://www.amazon.com/gp/product/B09TYR314X" rel="nofollow noopener">this one from amazon</a>.&nbsp;Start by clearing out the holes as illustrated. A flat surface was left on these holes so additional support wouldn't be needed during printing. Only the leg and foot pads will need this.<figure class="image image_resized" style="width:51.27%;"><img src="https://makerworld.bblmw.com/makerworld/draft/735388/2024-02-16_cc69e7772ce41.png"></figure>For assembly, you'll be using the 3d printed spacers along with the M4 screws. The side with the nut is wedged slightly, so as you tighten it, it should grip onto the model instead of spinning.<figure class="image image_resized" style="width:50.28%;"><img src="https://makerworld.bblmw.com/makerworld/draft/735388/2024-02-16_e4a86bd163cf6.png"></figure>For the headphone rest, first screw the top to the bracket.<figure class="image image_resized" style="width:49.1%;"><img src="https://makerworld.bblmw.com/makerworld/draft/735388/2024-02-16_4922cbd159136.png"></figure>Then use the following image to help guide the rest of the build, and which screws go where. First assemble the main arm, and then work your way outwards, attaching the base, legs, feet, and headphone rest.<figure class="image image_resized" style="width:71.27%;"><img src="https://makerworld.bblmw.com/makerworld/draft/735388/2024-02-16_6c33876ddced.png"></figure>&nbsp;-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you're looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information.

Headphone Stand - Industrial

phone

rbbcardoso

Descrição: Celebre o vínculo inquebrável entre mãe e filho com este encantador modelo 3D. Projetado com carinho, o &#34;Coração Aconchegante de Mãe e Filho&#34; é uma peça simbólica perfeita para presentear ou decorar seu espaço em homenagem ao amor materno. Este design intricado apresenta silhuetas delicadas de uma mãe e seu filho dentro de um coração, simbolizando proteção, amor e aconchego. É um item decorativo ideal para o Dia das Mães ou como um presente de aniversário para uma mãe especial.Dimensões Físicas:<ul><li>Largura: 150mm</li><li>Altura: 140mm</li><li>Profundidade: 20mm</li></ul>Sugestões de Impressão 3D:<ul><li>Infill: Recomendamos um infill de 10% para equilibrar a durabilidade com a economia de material.</li><li>Qualidade de Camada: Para capturar os detalhes finos, uma altura de camada de 0.2mm é ideal.</li><li>Material: PLA, ABS, ou PETG, dependendo da preferência e finalidade.</li></ul>Tempo de Impressão Estimado: O tempo de impressão pode variar dependendo da impressora e das configurações específicas, mas com as sugestões de qualidade fornecidas, espera-se um excelente acabamento com eficiência de tempo.Uso Recomendado: Este modelo é perfeito para decoração doméstica, presentes comemorativos ou como uma atividade educativa para ensinar crianças sobre design e impressão 3D.

Mother's Day

Mother

MNeilson

This is a bracket kit for making a fun and colorful filament rack! It includes 8 brackets (4 upper corner and 4 lower corner) and 4 feet. It utilizes 2020 aluminum extrusion that can be purchased on eBay, Amazon, etc., and it is quite inexpensive. The size is fully customizable, but I will provide the sizes and parts that I used, as a reference. Yes, you can also just buy the plain 2020 brackets to make this filament rack. I designed these brackets and feet as a fun way to use my 3D printer and add some color to the rack!! After all, you have the printer, might as well use it! &nbsp;To make it like I have shown, you will need: 4 Upper Corner Brackets4 Lower Corner Brackets4 Feet48 M5 x 8mm long screws48 M5 T-slot nuts for 2020 extrusion4 legs, 2020 aluminum extrusion, 12" long each4 filament support rails, 2020 aluminum extrusion, 27" long each4 cross braces, 2020 aluminum extrusion, 5.5" each&nbsp;I won't go super detailed into the assembly. You can see how it's made from the pictures fairly well. I have also included detail shots from CAD showing the corner layouts. You'll assemble the corners using the screws, and the feet need to be hammered on for a tight fit. Due to variation in tolerance of the aluminum extrusion, you may find that the feet are loose if the extrusion was made small. If that is the case you would need to slice your own files and shrink the feet by 1% or so to get the fit you need.&nbsp; The distance between the upper and lower rail should be about 9" to give enough room to get the spools in and out. This design holds about 20 standard spools. Feel free to make it longer or shorter or adjust and dimensions as needed. If you make it too much longer, you'd need to add supports in the middle. It could go a bit longer, but I am not sure how much. It will require cutting the aluminum extrusion. If you don't want to cut it, you can spend a little more and get pre-cut lengths. There are common sizes available that are close enough to my design to work properly. (150mm for the 5.5", 300mm for the 12", and 700mm for the 27". They are not exact but close enough to work, and available already cut)&nbsp;Here are some examples of what to buy to make this:&nbsp;<a target="_blank" href="https://www.amazon.com/Conrner-Connector-M5-Aluminum-Accessories/dp/B0BWHHPHG9/ref=sr_1_11?crid=33F4I1EWTFR2D&keywords=2020+m5+t+nut+m5x8+screw&qid=1705782066&sprefix=2020+m5+t+nut+m5x8+screw%2Caps%2C93&sr=8-11" rel="nofollow noopener">https://www.amazon.com/Conrner-Connector-M5-Aluminum-Accessories/dp/B0BWHHPHG9/ref=sr_1_11?crid=33F4I1EWTFR2D&keywords=2020+m5+t+nut+m5x8+screw&qid=1705782066&sprefix=2020+m5+t+nut+m5x8+screw%2Caps%2C93&sr=8-11</a>This is way more hardware than you need, but an example of what to buy. <a target="_blank" href="https://www.amazon.com/Aluminum-Extrusion-European-Standard-Industrial/dp/B09DYJWBGD/ref=sr_1_3?crid=115Q1CVEC5PQS&keywords=2020+aluminum+extrusion+1000mm&qid=1705782466&sprefix=2020+aluminum+extrusion+1000%2Caps%2C113&sr=8-3" rel="nofollow noopener">https://www.amazon.com/Aluminum-Extrusion-European-Standard-Industrial/dp/B09DYJWBGD/ref=sr_1_3?crid=115Q1CVEC5PQS&keywords=2020+aluminum+extrusion+1000mm&qid=1705782466&sprefix=2020+aluminum+extrusion+1000%2Caps%2C113&sr=8-3</a>again too much extrusion, but it's cheap in bulk, and you'd probably find another use for it later!! I use it all the time for various projects. &nbsp;

Bracket Kit for Filament Rack

Brakets

iNkosi3D

Tiny mushroom with 1mm hole for drop earrings printed in three parts so choose your colour. These actuallt turned out way better than expected and make lovly eatrings. As with all things 3D printed they are scaleable however for earring charm size I would advise against using a 0.4mm nozzel at 0.8mm layer height (I tried and they did not turn out very clever)These were printed with 0.2mm nozzel on A1 MiniBBL silk filament &nbsp;

Mushroom

Aretes Cadenas

lucamoretti86

ModelDo NOT adjust the size in your slicer!! The layers will not come out right. Do not change the size, this will cause errors in color change compromising the entire print. Use my print profile or you will not get the desired results. It can be printed safely without AMS and on any printer. I hope you like it, I hope you like it, if you want to support me leave a like and vote five stars thank you!&nbsp;Nozzle: 0.4Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Mandarin Orange Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Charcoal At layer #7 (0.64mm) swap to Jade White At layer #13 (1.12mm) swap to Gray At layer #14 (1.2mm) swap to Jade White At layer #16 (1.36mm) swap to Charcoal At layer #19 (1.6mm) swap to Mandarin Orange At layer #22 (1.84mm) swap to Jade White for the rest.

Harry Potter Hogwarts Castle - HueForge

Home Decoration 

OCDTOOLFREAK

Yes there are a lot of other battery holders including my own, BUT this one is king of aesthetics with its color a and design looking to par with the Milwaukee family of tools. Mounts solid to the wall and holds up to 4 of even 12 amp hour batteries. Hollowed out to not use so much plastic and and strong enough to keep them locked in. Lets face it we all buy the most expensive tools because A- They work great and B- They look good so the accessories have to match. UPDATE: I have now added the Packout feet so it can mount to the Packout wall mount system&nbsp;Thanks for the support and appreciation for my work…..as you all know printing can be expensive and creating takes time if you&#39;d like to support me even further then buy me a coffee here….. https://www.buymeacoffee.com/ocdtoolfreak

Milwaukee M18 battery 4x Packout wall mount

Tools

madizmo

This is the latest version of my AMS saver after bambu asked me to take down my old models. Apparently some people managed to damage the feeder leds with some of the previous models. This version mounts to the top of the feeder unit using double sided sticky tape so there is absolutely no chance of causing any damage to your AMS unit. I used the clear 1mm thick sticky tape off Temu on mine and they are stuck very well. I&#39;ve been using 100mm ptfe tube with no issues, if you seem to get loading issues try 85mm. The ID of the ptfe hole is 4.2mm but because of the print orientation it can still be tight, i run an allen key through it along the top edge to smooth the layers a bit. You can play with flow rate a bit as well if too tight&nbsp;works best with my <a target="_blank" href="https://makerworld.com/en/models/172221#profileId-189118" rel="nofollow noopener">filament guides</a>, the ones in the pictures i&#39;m still testing but the originals work great&nbsp;&nbsp;Disclaimer: This is a modification to the machine and any issues caused by these mods will not be covered by Bambu.

AMS Saver V5

kk20100kk

Stick it with double sided tape under your desk to make them dissapear. Simply insert all the cables you want in the channel and the lip inside will prevent them from coming out. Fast print, no supports required and ease of use and install. Compatible with any cable size.I made them in different length so you can print the ones you need. You can also customize the length in the slicer by cutting them to the desired length.They are 50mm wide and 30mm thick with ribbles pattern.&nbsp;

Under desk cable organizer channel

cables

9percent

OpenSCAD file (.scad) has been added! The text part can be customized.&nbsp;This filament sample has ・0.2, 0.4, 0.6, 0.8, 1.0, 1.2, 1.4, 1.6, 1.8 mm thickness area ・31mm x 51mm label area ・φ10mm hole ・simple slopeOverall thickness is 2mm. Please check out Filament sample box!<a target="_blank" href="https://makerworld.com/ja/models/121242#profileId-130401" rel="nofollow noopener">https://makerworld.com/ja/models/121242#profileId-130401</a> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000037649/design/2024-01-03_831cfeeef2b0c.jpg">

Filament sample

Filaments

acevalsl

Design with the word love of the iconic New York poster, printed in the air and with the possibility of selecting colors in the printing parts.It is designed so that each filament crosses the word love and maintains tension during and after printing, making it easier to print and stronger afterwards.&nbsp;Diseño con la palabra amor del icónico cartel de Nueva York, impresa en el aire y con la posibilidad de seleccionar colores en las partes de impresión.Está diseñado para que cada filamento atraviese la palabra amor y mantenga la tensión durante la impresión y después de ella, haciendo que sea más fácil de imprimir y más fuerte después.

Love

Valentin

Nostalgicprints

Finally off work an ready to get back model is ready to print prepainted as always &nbsp;Filament used:Sunlu Yellow Kingroon Tan Sunlu White Kingroon Black I use these usb led light strips from aliexpress http://tinyurl.com/mrkt6u5s

Homer Simpson Led light box (Ams Ready)

Lamps

Akio-42

When stacking several bins on top of each other it can be a bit tedious to access the lower bins. Especially when you place the bins in a box like in my IKEA Samla Gridfinity series (<a href="https://www.printables.com/social/145063-akio/collections/484185" rel="nofollow">https://www.printables.com/social/145063-akio/collections/484185</a>). To improve that situation I designed a baseplate that can be placed on top of Gridfinity bins like normal bins and is sturdy enough to be lifted.<h3>General usage</h3>You can print any of the baseplates and screw them together with a m3x8 screw (BHCS) and a m3 hex nut. This modularity has a lot of advantages. It gives you the possibility to create a custom grid design, that holds together nicely. You can later on remove the connection and reassemble the baseplates to your liking, saving you from reprinting baseplates. Also you can print smaller modules on smaller printers and assemble it to a huge grid. The baseplate assembled this way is fully compatible with the standard gridfinity containers.The baseplates are designed to use ferromagnetic screws to act as magnetic counterparts for bins with magnets on the bottom. This saves you from the tedious task of getting the magnetic polarity right on all bins you equip with magnets. They just will stick to the ferromagnetic screws, no matter what orientation the magnets are in. Also ferromagnetic screws are mostly cheaper than magnets.The baseplates have tapered holes so it should be easy to screw in m3x6 or m3x8 flat head coutersunk screws (FHCS).<h3>Stackability</h3>The basplate is not flat on the bottom. It features the same underside as normal bins would have. That way the baseplate can be securely stacked on normal bins. Also it is beefy enough to be lifted.<h3>Closed vs open</h3>The stackable baseplates come in two versions. One where the base is open and one where the base is closed. The open base saves a bit more material and is a bit lighter. The closed base needs a bit more filament, but when you stack it on boxes it can act as a lid for the boxes below.<h4>Attribution</h4>This is a remix of my modular gridfinity baseplates <a href="https://www.printables.com/model/360046-gridfinity-modular-baseplates" rel="nofollow">https://www.printables.com/model/360046-gridfinity-modular-baseplates</a> It has one major improvement over the original design:<ul><li>The baseplates are now stackable. The original baseplates have a flat bottom and are desiged to be placed on flat surfaces. These baseplates cannot only be securely stacked upon another, but also be securely stacked on bins. It allows layered storage of gridfinity bins combined with easy accessibility. This is reached by the bottom of the baseplates being modeled after the Gridfinity system and based on the specification available at <a href="https://gridfinity.xyz/specification/" rel="nofollow">https://gridfinity.xyz/specification/</a> which is shared unter the licence <a href="https://creativecommons.org/licenses/by-nc-sa/4.0" rel="nofollow">https://creativecommons.org/licenses/by-nc-sa/4.0</a> </li></ul>

Gridfinity Stackable Modular baseplates

Gridfinity

LaurienzuDesign

<figure class="media"><div data-oembed-url="https://youtu.be/tiv2-XtsNCY"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/tiv2-XtsNCY" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h3>INTRODUCTION</h3>This project was born in the spirit of providing a functional and optimized mount for the community of Sapphire users and it's the result of more than 200 hours of design, testing and reiterating in my free time. I will do my best to maintain and improve the project with incremental upgrades, but maintenance takes time and effort. If you wish to support my work and motivate me please consider to buy me a coffee ☕ <a target="_blank" href="https://ko-fi.com/F2F28XZ5E" rel="nofollow noopener">Support me on Ko-Fi</a> For help, discussions and other useful links <a target="_blank" href="https://linktr.ee/laurienzudesign" rel="nofollow noopener">Click Here</a> Thank you very much for your support!!! ❤️<h3>THE DIAMOND MOUNT 💎</h3>Designed with “form follows function” in mind, the goal was to have a mount with optimized cooling, totally hidden cables, bowden, Sherpa mini or Sherpa micro direct drive support, integrated belt tensioner, an ADXL345 mount for Klipper and more. It is tailored around the geometry of Two Trees Sapphires printers but can be mounted on any MGN12H rail printer if belt path is adaptable.Diamond mount currently supports E3D V6, V6 Volcano and similars, Dragon with a groove or rigid mount, Phaetus Dragonfly, Mellow NF-Crazy (mosquito) and more!If you like my design, please rate it and post your make! Any comment and suggestion to improve the project is really appreciated, I will release future updates in this page.Many thanks to my friend BostonGeorge_76 and to my others beta testers friends for helping me to test and improve the mount.&nbsp;For assembly please read the <a target="_blank" href="https://docs.google.com/presentation/d/1-Ee2e8QgYi-yDCYDKD2s8ehqo0UsH6LD/edit#slide=id.p1" rel="nofollow noopener">ASSEMBLY GUIDE</a> carefully!<h3>FEATURES</h3><ul><li>Low poly diamond-like design</li><li>Designed for 3D printing, all overhangs and tolerances are adjusted to have a perfect fit and to be printed without supports (you just need good cooling and bridge tuning).</li><li>Modular support for BL-touch and P.I.N.D.A. probe, you can adapt other probes using the faceplate STEP file</li><li>Natively compatible with Sherpa Mini and Micro, compatbile too with BMG in direct drive, Orbiter V1.1, V1.5, V2, LGX Lite, TBG Lite with the use of the adapting plate</li><li>An actual belt tensioner, you can fine tune the tension of each belt simply with an M3 screw (turning clockwise tight the belt and anticlockwise to release tension)</li><li>Belt perfectly parallel for both Pro/Plus V1 and Plus V1.1 with dedicated belt clamps</li><li>Removable rear belts blocks (you can disassembly the mount without losing the tensioning setting)</li><li>Brass inserts for structural fittings, 2 versions of top and main frame available for 5mm and 4.6mm diameter inserts (for extra additions like fans and ADXL there are calibrated holes for screws, to keep a lightweight solution)</li><li>Tilted part cooling fans, resulting in a smaller attack angle inside the duct, and improvements over the laminar flow</li><li>Ducts designed with CFD simulations (modeled on GDStime fan curve) to optimize flow without loosing pressure. Real tests were done to match the simulations</li><li>X axis limit switch hidden and integrated in the top frame (sensorless homing supported with dummy endstop)</li><li>Internal cables management (no cables are visible) with routes and guiding tube</li><li>Low weight thanks to the removal of all the original metal plates, it can reach 130g in the lightest bowden configuration</li><li>You gain about 5mm of Z but you will lose a few mm on X and Y (less than 10 in total) so if you don't like this please don't use it</li><li>The space to fit the ADXL345 accelerometer, used for Klipper, is embedded in the main frame and positioned in the center of gravity to avoid misreadings</li><li>Hidden hotend fan maintaining a proper flow</li><li>Hidden bed probe integrated in the faceplate (no LEDs disturbing the webcam)</li></ul>Required parts and screws (Bill of materials): <a target="_blank" href="https://docs.google.com/spreadsheets/d/1BW-cE3cIfOesapLvuGciVe0dl3kaHlzK0vwRGYZZXz4/edit#gid=0" rel="nofollow noopener">CLICK HERE</a>Others suggested parts and upgrades: <a target="_blank" href="https://docs.google.com/spreadsheets/d/1BW-cE3cIfOesapLvuGciVe0dl3kaHlzK0vwRGYZZXz4/edit#gid=152074595" rel="nofollow noopener">CLICK HERE</a>&nbsp;And, if you want to buy another printer for this mount (😂):<ul><li>Sapphire Pro (SP-3) <a target="_blank" href="https://s.click.aliexpress.com/e/_9Hg0pZ" rel="nofollow noopener">Aliexpress</a></li><li>Sapphire Plus (SP-5) suggested! <a target="_blank" href="https://bit.ly/3jwpGEe" rel="nofollow noopener">Aliexpress</a></li></ul>I hope you will enjoy this project as much as I do. Please consider supporting my work by donating so I can continue creating for you.Thanks a lot 😊 Please read the <a target="_blank" href="https://docs.google.com/presentation/d/1-Ee2e8QgYi-yDCYDKD2s8ehqo0UsH6LD/edit#slide=id.p1" rel="nofollow noopener">ASSEMBLY GUIDE</a> carefully before asking help!&nbsp;Have fun and... shine bright like a diamond! 💎&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/3m3Z6EEORzQ"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/3m3Z6EEORzQ" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><figure class="media"><div data-oembed-url="https://youtu.be/i7cHbiPYaa4"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/i7cHbiPYaa4" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

The Diamond Mount 💎 – An high performance toolhead for your twotrees SP-3 or SP-5 CoreXY 3DPrinter

Extruder

rostap

<h3>Arm mounting system </h3>It is a universal set of holders and arms. You can use this system as a notebook holder, tablet holder, monitor holder, camera or any other device holder or you can have it as a shelf holder.If you print a pair, you can made various tables.You can attach more arms togehter. I made some connecting parts and other accessories. There are no limits to imagination. I made it with increased strength and durability. If you add few perimeters the holders/arms can hold pretty good weight. &nbsp;&nbsp;&nbsp;Small light versionHolders reduced x 0.6 and then adjusted (hole sizes, gaps, etc.)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_ygt4l1gyz0rx.jpg"></figure><h4>Základní informace</h4><figure class="table"><table><tbody><tr><td>&nbsp;<figure class="image image_resized image-style-align-left" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_1vuk35qftkm3.jpg"></figure>&nbsp;</td><td>&nbsp;You can adjust the angle in ten degrees. Screw and nut fit on both sides. &nbsp;&nbsp;&nbsp;</td></tr><tr><td>You can tight and loose from both sides no matter where the nut is. </td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_5bbkp2ve4kgr.jpg"></figure></td></tr><tr><td><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_l4f3cs4r4hsf.jpg"></figure></td><td>There are various nuts and screws. Of of them counts with the allen screw (hex bolt) M8x40&nbsp;</td></tr><tr><td>You can also print the crew which can be tight and loose without gear- with the printed hex bolt screw. </td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_7dyjbvq16pqm.jpg"></figure></td></tr><tr><td><img src="https://media.printables.com/media/prints/165239/rich_content/5d2096ce-0223-4834-ade9-1fd6b3aec194/resize_img_6432.jpg#%7B%22uuid%22%3A%2292583698-0623-4e34-94da-bb853c30ae47%22%2C%22w%22%3A2016%2C%22h%22%3A1512%7D"> <img src="https://media.printables.com/media/prints/165239/rich_content/4dd49cb0-b7a2-4690-8a96-9c03407d2c2e/resize_img_6427.jpg#%7B%22uuid%22%3A%225c571a00-83c6-45bf-a6bb-97f04a44ed33%22%2C%22w%22%3A2016%2C%22h%22%3A1512%7D"></td><td>The holes for key in the screw and two arms have the same size as the holders in Honeycomb storage wall (https://www.printables.com/cs/model/152592-honeycomb-storage-wall). That means that you can hang different accessories on the arms. </td></tr><tr><td>There are various of arms. </td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_bdrw6oh1oh1y.png"></figure></td></tr><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_u06b8t58ztlv.jpg"></figure></td><td>ClampI made 3 different types - <ol><li>for the screw M5/M6 mounting spacing for holders 30x30mm</li><li>for the screw M5/M6 mounting spacing for holders 40x40mm</li><li>for the screw M5 mounting spacing for holders 40x40mm</li></ol>&nbsp;</td></tr><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_t3u1ipn1agdd.jpg"></figure></td><td>VESA rotating holder - 75mm</td></tr><tr><td>Combination for possitioning along the axis Z<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_7m1sfrwcw20k.jpg"></figure>&nbsp;&nbsp;</td><td>System - high table for tablet holder <img src="https://media.printables.com/media/prints/165239/rich_content/228c6e5e-a2a4-41ce-a79e-962f4006c973/resize_img_6430.jpg#%7B%22uuid%22%3A%22da81a7de-4dd3-453e-96dc-6c179e6bc32e%22%2C%22w%22%3A1512%2C%22h%22%3A2016%7D"></td></tr><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_11nh0grq3czm.jpg"></figure></td><td>There are holders for three tablets. Bottom width<ol><li>196 mm</li><li>250 mm</li><li>305 mm</li></ol>screw spacing 30mm</td></tr></tbody></table></figure><h4>Basic arms</h4>The only difference is the grid<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_0qsfmal86eys.png"></figure>&nbsp;<h3>Holders</h3>A few basic handles<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_wjg38olir4sz.png"></figure>&nbsp;<h4> </h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_ej2zf1avpe73.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_2ujybj6hyhzb.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_3i0br0eesaay.png"></figure>&nbsp;I printed small parts on the Prusa Mini, the arms on the Ender 3.&nbsp;My printing settings<ul><li>material: PETG</li><li>perimeters: 8 and more</li><li>infill : 30% and more</li><li>layer height 0.3 (with nozzle 0.6 layer height 0.4) (screw and nuts only 0.2mm layer height) </li></ul>&nbsp;

Multifunction Arm mounting system

Computer 

Kubikossi

<h2>New Universal Spool v2 released! <a target="_blank" href="https://makerworld.com/de/models/125311#profileId-135347" rel="nofollow noopener">Click here</a>!</h2>&nbsp;Universal spool for using filament on cardboard spools or Refill Packs (like eSun Refill Filament) in the Bambu AMS. No rewinding necessary, simply transfer the cardboard or refill core to the universal spools. Suitable for core diameters (inside) from 75 to 100mm. With Jayo spools, it is a little tricky to remove the rather thick ring at the core. You need a sharp cutter and patience.<a target="_blank" href="https://youtu.be/YNShKH9P1Qs?si=-JpmYJoZzH9Go-eM" rel="nofollow noopener">Check out my new video with a steb by step tutorial.</a><ol><li>Measure the width of the cardboard spool (inside between the reels). </li><li>Carefully remove one side of the cardboard spool. </li><li>Screw the corresponding core (50, 55 or 60mm width) onto a reel and insert it into the cardboard core.</li><li>Then turn over and remove 2nd side of cardboard reel.</li><li>If desired, then insert Silicatube (with silica gel or ballast).</li><li>Then screw on second roll, done.</li></ol>Now the filament can be used in the AMS without any problems. I made 2 designs of the reels, design nr. 2 needs less printing time. I use PLA (it is flexible enough for the core) with these settings: 3 walls 3 top and bottom layer 12% Gyroid Infill 0,16mm layerhigh (with variable layerhigh for the reels if you want)&nbsp;22.11.2023&nbsp;added the new v2 Cores (as Print Profile)<figure class="image image_resized image-style-side" style="width:37.94%;"><img src="https://makerworld.bblmw.com/makerworld/draft/797328/2023-11-22_2f2f7f0bccecd.jpg"></figure> The number of spiral arms was reduced from 4 to 3, while the diameter was increased from 110 to 117 mm. This means that the spools sit even better and less material is used, which also reduces the printing time slightly.&nbsp;The v2 Core with 60mm was tested by me with various filament and is therefore compatible with the following cardboard spools:<ul><li>Creality</li><li>eSun</li><li>GratKit</li><li>Kexcelled</li><li>Overture</li><li>Sunlu</li></ul><figure class="image image_resized image-style-side" style="width:37.86%;"><img src="https://makerworld.bblmw.com/makerworld/draft/797328/2023-11-22_61966bfd41a5d.jpg"></figure>&nbsp;Not yet tested, but should fit:<ul><li>Eryone</li><li>Bambu Lab Refill</li></ul>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;17.10.2023 <ol><li><a target="_blank" href="https://makerworld.com/en/models/43852#profileId-45166" rel="nofollow noopener">new rewind core</a>. With this new core it is now possible to rewind filament with my universal spool, e.g. from a cardboard spool or a 3kg spool.</li></ol>&nbsp;02.10.2023<ol><li>added a &#34;Core Jayo 85-55&#34; especially for Jayo Spools. It&#39;s slightly smaller than the normal 100-55 Core.</li><li>reworked the silica-top, the thread now runs more easily.</li><li>updated the 3mf-File</li></ol>

Universal Spool for Bambu AMS

Spool

Matthew

I designed this to generate various sizes of stools for around the house... one to support my portable AC about 12 inches off the ground, one for my height-challenged spouse to reach the top shelves in the kitchen, one for getting into the pool, etc.The example stool size is for making from a single sheet of 24x24 inch wood that is 18.5mm thick but everything is parametric and can be changed.The file will generate SVG/DXF files for use in a CNC router but you have to download the file and load it on your computer - the online customizer cannot handle 2d file generation.Inspired by <a href="https://www.thingiverse.com/thing:3053615/" rel="nofollow">https://www.thingiverse.com/thing:3053615/</a><h3>Print Settings</h3>Printer Brand:MonopricePrinter: <div>Maker Select</div>Rafts:NoSupports: <div>No</div>Resolution:250Filament: Any Any Category: Household

Customizable Stool

House

Sevro

InstructionPour water into model and make bird music :)Water level should be like on a picture or a little more.<figure class="image image_resized" style="width:387.047px;"><img src="https://media.printables.com/media/prints/444581/rich_content/df3ed6c0-28ff-431c-a50b-145af8c98ac3/thumbs/cover/800x600/jpg/img_20230406_203911.webp"></figure>If bird only whistle try tilt it forward. You have to find spot where water is bubbling by you blow. Different tone of tweeting is achive by tilting bird and strenght of blowing.VersionsThere are two versions of TweetyBird1. TweetyBird of normal size. It can produce a little different tones and a little different types of tweeting like on movie below. It is easy to make proper sound. However print time is about 1.30 h2. TweetyBird smaller by 50% of normal version. I had to make some adjusment to it work and proper print. It sound quite similar to normal size bird, but can produce only one tone of tweet and it is a little harder to make proper sound. However print time is only 30 min.PrintingPrinted with Prusa mk2: 0.6 mm nozzle, 0.2 mm layer height, filament: Print-me Ecoline, Plast-Spaw.PresentationAnd how it works.&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/xpk65SlGmp8"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/xpk65SlGmp8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Have fun :)

Tweeting Bird

Toys

benlevi

<h2>BLV - AMS Riser for X1C V3.1 Final</h2><figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 30%)"><h3>Introduction</h3></td></tr><tr><td>I&#39;m Ben Levi, and I want to talk to you about this BLV AMS Riser that I designed: So, when the AMS is sitting on top of the printer, you can&#39;t really see what the printer is doing, and you can&#39;t even open the top glass cover to let some air in when you&#39;re printing High temp stuff. basically, something that will hold the AMS and free your Glass top cover will be a good solution for that. Now I&#39;ve seen some similar AMS risers before, but none of them really wowed me.. i think..That&#39;s why I decided to come up with this sleek BLV AMS Riser design, easy to use, easy to put together, and reliable. I even added two handy drawers for your tools and stuff, a special shelf that can hold up to 4pcs Build Plates, built-in Dual LED strips. Sure, it took me a while, but I got it (almost..) done.As some of you may know, I love contributing to this wonderful community, which is why I chose to share with you my project without any fee or money. Among other things, I&#39;ve also given you access to the original CAD files (F3D,STEP) so that you can easily make changes, add, and improve as you see fit. Please, if you publish a remix, make sure to link it to the original project as a remix so that others can benefit from your effort. I kindly request not to use the files for commercial purposes without explicit permission from me.&nbsp;Thanks, Ben Levi<a target="_blank" href="https://www.paypal.com/paypalme/BenBLV" rel="nofollow noopener">If you want, buy me a beer </a>:)&nbsp;</td></tr></tbody></table></figure><figure class="image image_resized" style="width: 58.95%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-25_370cc55ef0c1d.png"></figure><h2>Main features</h2>These are just a few design features I&#39;ve planned. If you have more ideas, please share them with me, and I can incorporate them into the design. Also, feel free to add remixes (CAD files are available for download).<ul><li>Easy installation</li><li>Dual LED strip installed in optimal angle for LiDAR.</li><li>AMS riser</li><li>Top glass Holder</li><li>2 drawers for tools (with version for tools)</li><li>4 x Build Plates holder</li><li>Rubber Gasket for the glass</li><li>Customised Panels</li><li>access to original buttons</li><li>No screws required</li><li>CAD files available (F3D,STEP)</li></ul><figure class="table"><table><tbody><tr><td>&nbsp;<figure class="image image_resized" style="width: 92.39%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_18d41f48cf37f.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_a237ff37d0da5.png"></figure></td></tr></tbody></table></figure><h2> </h2><h2>How to print and where to begin?</h2>I must admit, if you&#39;re in search of a quick two-hour print and you&#39;re finished, this may not be the right place for it. To initiate and successfully complete this project, a considerable amount of filament and time investment is necessary. Here are the essential resources you&#39;ll be required to invest:<figure class="table" style="width: 70.13%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td>Printing Time</td><td>70~85 print hours - including color switching!</td></tr><tr><td>Printer</td><td>X1 Carbon, P1S, P1P, X1 or Other + AMS (Optional).</td></tr><tr><td>Filament</td><td><ul><li>2 kg - PLA/PETG Main filament color (GREY)</li><li>0.5 kg - PLA/PETG Secondary filament color (GREEN)</li><li>14 g - PLA/PETG Black filament for text (BLACK)</li><li>34 g - TPU flexible filament for your Gasket (BLACK)</li></ul>* Feel free to choose your own colors.</td></tr><tr><td colspan="2"><figure class="image image_resized" style="width: 98.07%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_77b29f1dbec36.jpg"></figure></td></tr></tbody></table></figure>I tried to keep the project in as few parts as possible and minimize the use of screws and glue. I&#39;ve also included three images that show all the parts and file names to help you easily know what to print and what to remove. Click on the pictures to enlarge.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_5539d72c1e42.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_1698b67225759.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_34f66213cbfb2.jpg"></figure></td></tr></tbody></table></figure>&nbsp;&nbsp;<h2>Printing settings</h2>Under each file name, I&#39;ve added a recommendation on how to print that component. Please note that these are just suggestions, and you can choose the filament type, infill percentage, and wall count according to your preferences.Additionally, I&#39;ve attached an image below that illustrates how to orient each component on the print bed for optimal results (click to enlarge):<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_c8a5b6a960393.jpg"></figure>Please note that you will find in also wonderful print profiles from the community too :)<h2> </h2><h2>Assembly instructions</h2>I think the best way to demonstrate the assembly is through a video. Therefore, I&#39;ve created a short animation video for you that illustrates the assembly process and the sequence of the project&#39;s components. Enjoy:<h3> </h3><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f7b5fb7649351.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_0604a5a98bf6d.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_4edcdff3d535e.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f3764fb52c104.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_7b9abe53ec9f3.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_611a02308f5c5.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_d8d2275f63acd.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f59c54b41a2bd.png"></figure></td></tr></tbody></table></figure><h3>Buttons assembly:</h3>Please print x2 Button insert.stl files and assemble as the photo below:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-29_89172a00d321c.jpg">&nbsp;<h2>Recommended Remix:</h2><ul><li><a target="_blank" href="https://makerworld.com/en/models/27690#profileId-24067" rel="nofollow noopener">Front Panels for P1P remix</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28098#profileId-24385" rel="nofollow noopener">new Drawers with Clean look and version with Text</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28948" rel="nofollow noopener">Spool Holder add on on the rear</a></li><li><a target="_blank" href="https://makerworld.com/en/models/29315" rel="nofollow noopener">Honeycomb panels for the sides</a></li></ul><h2>Links:</h2><ul><li><a target="_blank" href="https://s.click.aliexpress.com/e/_Dk1tOEL" rel="nofollow noopener">COB 5mm Dimmable LED strip</a> suitable to the project. please make sure to choose: “white” and “Strip-USB Button” options.  </li></ul><h2>Colors ideas:</h2><figure class="image image_resized" style="width: 59.65%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_5f2218eae1ea7.jpg"></figure><h2>How to download CAD (f3d,Step) files: <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_16ad19d8f61ba.jpg"></h2><h2> </h2><h2>Selected User makes:</h2><figure class="table" style="width: 90.79%"><table class="ck-table-resized" style="border: 1px solid hsl(0, 0%, 100%)"><colgroup><col><col><col></colgroup><tbody><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_3aaa07d5a3c1e.png"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 86.34%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_f5f9b0b8d1086.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_ee05726581f83.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_8efeadcf004be.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 79.61%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_c0866329e4121.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 92.92%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_f106d497bd601.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image image_resized" style="width: 94.67%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_d8fbe88a9ea.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_0d0d9ff1ec084.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr></tbody></table></figure>&nbsp;<figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 60%)"><h2>Changelog</h2></td></tr><tr><td><ul><li>19/9/23 - published first prototype. not meant yet to print.</li><li>19/9/23 - uploaded v1.1 with angled glass holder and fixed Size drawer, stronger rear part.</li><li>23/09/23 - Left/Right/Rear Panel edges optimization for better surface finish.</li><li>24/9/23 - Huge update v1.2 !<ul><li>Extreme optimization to main parts, now it&#39;s 6 parts but much less support and faster to print.</li><li>Added wire channel for the LED&#39;s wires.</li><li>Added lock pins to TPU gasket.</li><li>new secure method to front and rear parts in addition to the dovetails.</li><li>Optimization to all decorative panels.</li><li>2 x Button frame cover with logo for P1P and P1S.</li><li>increased glass holder degrease to prevent movements.</li><li>Deeper AMS leg&#39;s socket, securing the AMS in it&#39;s place.</li><li>Added special drawer with accessories. it has a place for the H1.0-H2.0 HEX keys, 2 x Hotends, 5 cutters, 4 x wipers, screws, glue and needle.</li></ul></li><li>25/09/23 - updated new version 1.3 with measurements fix.</li><li>29/9/23 - added 2 remixes: clean front drawer, drawers with text, Dash front parts for P1P.</li><li>29/9/23 - added Button insert.stl + button images assembly.</li><li>30/9/23 - remix section update! spool holder, honeycomb panels added.</li><li>4/10/23 - New optimized slicing profile! faster, less filament, better support!</li><li>02/03/24 - added more support to side model.</li><li>04/04/24 - changed print profile for wider base.</li><li>22/05/24 - optimized structure for vibrations.</li><li>31/05/24 - changed Internal structure to be more rigid.</li><li>29/06/24 - added BOM items  </li></ul></td></tr></tbody></table></figure>

BLV - AMS Riser for X1C / P1P / P1S V3.1 Final

Bambu Mods

Makefy

Cute and childish hanging storage bins for your organizing needs. All parts prints beautifully without any supports - I recommend using adaptive layer hight.Bins in the photos are printed with Polymaker PolyTerra: Banana Mint Arctic Teal Candy