helloben

Oachkatzl

A box for your Nikon Z needs.Neatly stores 4 Nion EN-EL 15C batteries, 4 XQD/ CF-Express B and 4 SD cards.If you want it to seal, use a piece of 1,75mm TPU filament, cut it to length and join the ends with ca glue, for example, to create a full loop.Logo is added as a shallow extrude so you can paint it in the slicer using the fill bucket tool - if you don't color it, it won't show up in the print at all.There's a 5 mm gap between the batteries/ cards and the inside of the lid. This allows you to add a piece of foam or similiar.The battery holders have the connector part cut out in the bottom, so you could have empty batteries up side down and still have them sit correctly.Latch and hinge uses a total of 3 M3x30 screws&nbsp;Update 23/02/24&nbsp;Added Version with 2 Batteries and 2 Card slotsAdded Version with single Batterie and 2 Card slots

Box for Nikon Z Storage and Batteries

Storage

Fresh3Design

Storage Rack for 5x5 Gridfinity base plates. Can hold 4 plates (100 boxes total).&nbsp;-PETG or stronger recommended.-Print x2 of each braces, lay on side for strength.-Print x1 of each side panels.

5x5 Gridfinity 4 Tray Storage Rack

Gridfinity

The Crafty Maker

Introducing my very first sponsored project. When Bambu Lab released their new translucent PETG filament I've reached out to them with an idea that have been thinking about for a while now, a model that resembles a stained glass window. Their translucent filament is a perfect fit for this.&nbsp;I was pleasantly surprised that they agreed and liked the project idea, so they sent me a batch of translucent PETG filament to get things started. &nbsp;There were a lot of ideas to choose from, but the space shuttle stuck with me, since I'm a big space nerd, so that was an obvious choice for me.&nbsp;Designing it was quite challenging because the color of the translucent filament varies on the thickness of the part. It took quite some test printing to get the best color and transparency, but eventually I was able to find the right balance and finished up the model.&nbsp;The filaments I've used are all Bambu Lab filaments. The parts that resemble the stained glass are printed in Translucent PETG Light Blue, Orange, Brown and Grey. Only the white parts are printed in a PETG that's not part of the translucent filament line. Those are printed in Basic PETG Transparent.&nbsp;The front and back frame are both printed in Basic PETG Black. All the other parts are all printed in Basic PLA. The box, lid and led panel or led strip holder are printed in the color black, the diffuser is printed in the color white.&nbsp;The box and the lid have little compartments where you can glue in magnets (width 6mm & height 3mm) but this is optional and not needed to keep the lid on the box.&nbsp;Print Settings&nbsp;Stained glass pieces<ul><li>100% infill</li><li>Top surface pattern: Octogram Spiral</li></ul>Front & Back Frame<ul><li>Arachne wall generator or detect thin walls</li></ul>Backlight Led Panel Holder<ul><li>Regular support on build plate only</li></ul>Backlight Led Strip Holder<ul><li>Outer brim recommended</li></ul>Diffuser<ul><li>100% infill</li><li>Outer brim recommended</li></ul>Box & Lid<ul><li>Outer wall speed 90 for consistent surface finish</li><li>Seam position: Back</li></ul>&nbsp;For the light source I've used following Bambu Lab products&nbsp;EU Store<ul><li><a target="_blank" href="https://eu.store.bambulab.com/collections/bambu-lab-3d-printer-filament/products/bambu-cmyk-backlight-board?skr=yes" rel="nofollow noopener">Led panel</a></li><li><a target="_blank" href="https://eu.store.bambulab.com/en-be/products/s-shape-led-strip-light-ws2812b-rgb" rel="nofollow noopener">Led strip</a> </li></ul>US Store<ul><li><a target="_blank" href="https://us.store.bambulab.com/collections/bambu-lab-3d-printer-filament/products/bambu-cmyk-backlight-board?skr=yes" rel="nofollow noopener">Led panel</a></li><li><a target="_blank" href="https://us.store.bambulab.com/products/s-shape-led-strip-light-ws2812b-rgb" rel="nofollow noopener">Led strip</a></li></ul>ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a <a target="_blank" href="https://patreon.com/TheCraftyMaker" rel="nofollow noopener">The Crafty Seller Patreon</a> subscription.

Space Shuttle Stained Glass Lightbox

Art Prints

FunkyArt

A 100% 3D printed Smartphone-holder-arm that offers, at least, three axes. And the option of double braces between the axes. In the standard configuration, the arm easily supports around 500 grams in any position. &nbsp;The versatility of this arm enables secure and flexible positioning of smartphones or even tablets and cameras (coming soon) in any desired orientation. Print with high infill and clean up the prints carefully, the minimal gap dimensions of the 3D printed parts ensure reliable function and solid haptic but could also be hard for some printers. &nbsp;You find more additional features and alternatives in the Download section. I will provide more Instructions soon.&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=FxNsubX2KjE"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/FxNsubX2KjE" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;There are some additional upgrades in the download section, such as additional phone rotating movement and counterscrews, less tight screws and a bigger phoneholder.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/752785/2023-11-18_f7836c4a1c65.png"></figure><figure class="image image_resized" style="width:98.24%;"><img src="https://makerworld.bblmw.com/makerworld/draft/752785/2023-11-18_a6107c3f6e376.gif"></figure>What to Print?<ul><li>1x CZFA_Flexframe_BaseA_part11x CZFA_FlexFrame_BaseA_part2</li><li>1x CZFA_FlexFrame_PhoneMount (or the optional bigger one)</li><li>1x CZFA_FlexFrame_Mount-Mount (or the optional one with rotating axis)</li><li>1x CZFA_FlexFrame_Screw_cap-lid</li><li>1x CZFA_FlexFrame_Screw_small_Phoneholder</li><li>3x CZFA_FlexFrame_Frame_25cm</li><li>4x CZFA_FlexFrame_Screw</li></ul>Additional parts for rotating your phone, small phones adapter or counters crews..<ul><li>CZFA_FlexFrame_mount-mount-additional-movement-2-2</li><li>CZFA_FlexFrame_mount-mount-additional-movement-1-2 (you will need also one more small screw)</li><li>CZFA_FlexFrame_PhoneMount-small_phones_adapter</li><li>CZFA_FlexFrame_XL-PhoneMount</li><li>CZFA_FlexFrame_Counterscrew (optional to add more weight)</li></ul>Also less_tight versions of the screws.

Flexible & sturdy phone arm (100% Printed)

Mounts

B-Engineer

----------if you like my work please, follow me and spread some love giving some like, ill do the same❤️--------- <a target="_blank" href="https://buymeacoffee.com/b.engineer" rel="nofollow noopener">Buy me a coffee</a>&nbsp;&nbsp;This fidget spinner is meticulously crafted with dual-spiral teeth featuring an optimized angle for smooth and enduring motion.This version incorporates the use of buttons on the central wheel for enhanced comfort and an external profile optimized for maximize finger gripping.&nbsp;→In order to assemble buttons it is necessary to pay attention and apply adequate pressure as the tolerance is narrow to prevent them from coming off during use.→Before obtaining a fluid and lasting movement it is necessary to rotate the spinner for some time in order to smooth out the sharp edges&nbsp;❤️If you appreciate mine work please, give a look at mine new Valentine&#39;s Version❤️<figure class="image image_resized" style="width:69.69%;"><a href="https://makerworld.com/en/models/177292#profileId-194977" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144741/design/2024-02-09_ab4c3a99953b1.webp"></a><figcaption> </figcaption></figure>&nbsp;If you want any modifications or variations, feel free to ask.Additionally, if you have specific requests for a spinner you would like to have, write to me privately, and I will do my best to fulfill your desires

Planetary Gear Fidget spinner - Racing version

Fidgets

TrendtB

Make your kitchen herb gardening easy - ideal for busy cooks and gardening enthusiasts, this planter ensures your herbs stay hydrated and fresh, even on your busiest days. If you're an avid cook, or know someone that is - start printing now and add a touch of green to those kitchen counters!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/323633/2023-12-29_27004b97fd569.gif"><figcaption>Make various patterns and arrangements with multiple planters</figcaption></figure>&nbsp;Inspired by my wife's passion for cooking with fresh herbs, this planter is designed to blend seamlessly into any kitchen aesthetic. Perfect for those who appreciate both functionality and style in their cooking space.&nbsp;<h3>KEY FEATURES</h3><ul><li>Easy Self-Watering: Built-in reservoir keeps herbs hydrated.</li><li>Artistic Design: Intricate floral pattern forming a love heart, adding a decorative touch.</li><li>Dual-Purpose Base: Use a standalone base as a stylish container for herb gardening tools.</li><li>Batch Printing Profiles: Optimized for quick and efficient batch printing.</li></ul>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/323633/2023-12-29_0b77f080a19a4.gif"><figcaption>The floral design allows you to play with different patterns depending on how the planter is placed.</figcaption></figure>&nbsp;&nbsp;<h3>HOW IT WORKS</h3>The planter is designed to slowly absorb water from the reservoir (base), which you occasionally top up with water. There is a seam that acts as a guide for how far to fill. Don't fill over this line or water will be pushed out through the top!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/323633/2023-12-29_f7d43224f4262.gif"><figcaption>The base acts as a reservoir of water - fill to just below the seam then place your plant on top</figcaption></figure>&nbsp;When you're planting your herb in the top half, it is recommended to use a wicking material at the very bottom. This helps to slowly absorb water into the soil and roots. You can place a couple of cotton balls / cotton wool in the bottom of the pot to do this. Then fill with soil, and your herb of choice.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/323633/2023-12-29_d13556ba7b91.gif"><figcaption>Place cotton wool into the bottom of the pot to act as a wicking material.</figcaption></figure>&nbsp;&nbsp;<h3>PRINT SETTINGS</h3>Use the designer profiles to ensure the base is water-tight, or you'll risk water seeping through the print! If you're looking to adjust the profile, or build your own - these are the key settings to maintain ensure there are no leaks:<ul><li>Infill overlap: 50%</li><li>Walls: 3</li><li>Top shell layers: 5</li></ul>Additional profiles have been provided to batch print, or print using a single plate and color.

Self-watering Herb Planter for the kitchen

Household

gwenhidwy

**Update** 1/13/2024I added a tray with a single extra large slot in the 220mmx220mm size per user requestIf you are looking for full trays in the other sizes they are available <a target="_blank" href="https://makerworld.com/en/models/16549#profileId-15418" rel="nofollow noopener">here</a>&nbsp;**Update 1/15/2024**I created a new set of trays <a target="_blank" href="https://makerworld.com/en/models/140419#profileId-153021" rel="nofollow noopener">Bento Connex</a>. They can connect together as well as stack&nbsp;This is a larger version of my original <a target="_blank" href="https://makerworld.com/en/models/122893#profileId-132376" rel="nofollow noopener">Bento Stax</a>. I added more compartments and a larger variety of trays.&nbsp;I have raw files and profiles for the following dimensions<ul><li>220mmx220mm</li><li>180mmx180mm (original size)</li><li>160mmx160mm (for A1 Mini)</li></ul>I highly recommend using the profile provided for the 220x220 ones as I had some difficulty getting good first layer adhesion due to the size but eventually got it working. You may need glue stick, although I did not.&nbsp;The 180mmx180mm and 160mmx160mm versions are also compatible with my <a target="_blank" href="https://makerworld.com/en/models/16549#profileId-15418" rel="nofollow noopener">Nesting Trays</a> as well as the original Bento Stax&nbsp;I have included a new version of the lid in the raw files, which is a bit tighter of a fit, let me know how it works, and I will include it in the profiles.&nbsp;Please checkout some of my related models:&nbsp;<figure class="table"><table><tbody><tr><td><h2><a target="_blank" href="https://makerworld.com/en/models/140419#profileId-153021" rel="nofollow noopener">Bento Connex</a></h2></td><td><h2><a target="_blank" href="https://makerworld.com/en/models/122893#profileId-132376" rel="nofollow noopener">Bento Stax</a></h2></td><td><h2><a target="_blank" href="https://makerworld.com/en/models/16549#profileId-15418" rel="nofollow noopener">Nesting Trays</a></h2></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/406438/2024-01-15_69fa80b41f9e3.jpeg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/406438/2024-01-15_2819c67734b588.jpeg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/406438/2024-01-15_2f2aeabf4ee048.jpeg"></figure></td></tr></tbody></table></figure>

Bento Stax 2.0

Tools and Storage

I know filament samples have been done a lot but hear me out, I have tried many different filament samples over time and most of them had features that I didn't need because the calibration on these Bambu printers works so well and so these features were just wasted time since they made the print take longer.&nbsp;I made this sample to be easy to store, hold a large printed label, illustrate the transparency of the filament (which seemed to be the one thing I still wanted) and illustrate the color of the printed filament since that can be slightly different. This sample also only uses about 5g of plastic which I also wanted to minimize. This sample is thinner than many as well and intentionally not rigid to have a demonstration of the flexibility of various materials after they are printed, this is also the reason these samples are larger than many. This sample also includes both sharp 90 degree corners and a curve as I know the Bambu printers can print these features so I wanted to be able to see how different filaments worked.&nbsp;The design was inspired by other <a target="_blank" href="https://www.amazon.com/RAL-K7-Colour-fan-deck/dp/B000TZFQXC/" rel="nofollow noopener">color sample books</a> that can be purchased for paint and other mediums and is designed to be stored on a binder ring <a target="_blank" href="https://www.amazon.com/Binder-Nickel-Plated-Keychain-Silver/dp/B07DN8TXG5/" rel="nofollow noopener">like this one</a> but really any ring or wire/rope would work great, I wanted it to be flexible and let me hang them as in the photos. The label area is designed for 24mm labels <a target="_blank" href="https://www.amazon.com/Brother-P-touch-TZe251-Standard-Laminated/dp/B004I2GG5Y/" rel="nofollow noopener">like these </a>and is designed to give a 75mm long a little bit of wiggle room, I couldn't include the label template that I use for Brother P-Touch software on Makerworld as they don't allow the file format but if that changes I will add it. The layout file includes a bunch of covers that I needed, the text can be modified in the slicer or post a comment and I can add more!&nbsp;I hope someone else finds this useful!&nbsp;NOTE: The cover plates have a bunch of options on them, in the Bambu Handy mobile app you can select which models to print from a plate (like a reverse of the skip interface) from Makerworld designs so that is how I use it, I can also upload a version with each cover on an individual plate if anyone wants it.

The Specimen - A Fast to Print Filament Sample

My Creations

maximdivirgilio

North American XB-70 Valkyrie 1:80 Scale Model&nbsp;38 Pieces2 Optional Display StandsAssembled with CA Glue0.2mm nozzle is suggested for most parts&nbsp;&nbsp;VERSION TWO UPDATE&nbsp;From the beginning I was aware this was a difficult model. While buildable, it was far from optimized. Since seeing the reception of the model, I have committed the time towards optimizing it a bit further, making it easier to print by itself as well as in multiple colors. Please refer to the Version 2 folder for these updated models. &nbsp;As well, I highly suggest opting for the 3MF print profiles over the raw STLs. &nbsp;PLEASE NOTE STAND 2 WILL ONLY WORK IF PRINTED IN A STIFFER MATERIAL THAN PLA&nbsp;&nbsp; Please feel free to comment of PM with any questions or concerns. Enjoy!

XB-70 Valkyrie

Models

Jorge Rui

Light flood for closed Bambu lab printers 

Bambu X1 Addons

Easily add labels to your Bambu Lab reusable spools, with a remaining filament estimator!Compatible with Make My Sign for custom labels.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/212190/2023-11-28_115305ad38652.gif"></figure>&nbsp;I absolutely love the Bambu Lab reusable spools, but you're either stuck with the original label, or have none at all.I also like the indicator on their labels that gives you an estimate of how much filament is remaining.&nbsp;So I designed this press-fit label holder for the spools!<h3>FEATURES</h3><ul><li>Indicator shows estimated remaining filament (200g, 400g, 600g, 800g)</li><li>Coloured zone for under 200g (a reminder to order more filament!)</li><li>Press-fit design snaps onto the spool</li><li>Compatible with AMS</li><li>Easily change labels for different materials</li></ul><h3>INCLUDED LABELS</h3>I've included many common material labels, all generated through Make My Sign.Just duplicate the labels you want from “Common Filamanet Labels” to the “Copy labels to print here” plate, and your project will remain organized.<ul><li>PLA</li><li>PLA Matte</li><li>PLA Tough</li><li>PLA Marble</li><li>PLA Metal</li><li>PLA Silk</li><li>PLA Sparkle</li><li>HTPLA</li><li>PLA-CF</li><li>PLA Aero</li><li>PLA Alu(minium)</li><li>PLA Steel</li><li>Polylite PLA</li><li>PETG</li><li>PETG-CF</li><li>ASA</li><li>ASA-CF</li><li>ABS</li><li>PA</li><li>PC</li><li>PA6</li><li>PAHT-CF</li><li>TPU95</li><li>Supp(ort) PLA</li><li>Supp(ort) PETG</li></ul>Label designs powered by Make My Sign from MakerWorld(<a target="_blank" href="http://makerworld.com/makerlab/MakeMySign" rel="nofollow noopener">makerworld.com/makerlab/MakeMySign</a>)<h3>MAKE YOUR OWN LABEL</h3>You can create your own labels in Make My Sign, as long as you use the following settings:<ul><li>Rectangle Base Plate, 1mm thick, 1mm corner radius, Hole: None</li><li>10mm Height</li><li>43mm Width</li></ul>I used Roboto font for the included labels at size 36. If you have a 0.2mm nozzle, I'd recommend using a smaller font if you want to fit more text on the label.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/212190/2023-11-28_8864da819adf2.png"><h3>MATERIAL CHOICE</h3>When choosing the material to print in, consider the environment your spool may be in.If you dry your materials, try to choose a filament that won't soften when your spool is in a dehydrator/heater.<ul><li>PLA is fine for PLA spools, and may be ok for PETG (not tested)</li><li>PETG and ABS are better for higher temp filaments.</li></ul>The example models used:<ul><li>Bambu Lab PLA Matte White</li><li>Bambu Lab PLA Basic Red</li><li>Bambu Lab PLA-CF</li></ul>&nbsp;<h3>REMOVAL</h3>If you want to remove the label holder for whatever reason, you can pop it off using a scraper. Wedge the blade underneath the holder and lift. If the pins break off, you can just push them through the holes in the spool using a small tool (e.g. hex key) and remove the debris.