heatleyj

ilikeapples12

A pine tree designed to have a bricky look weighs about 310 grams and takes 8 hours to print on a P1P. all parts fit on the A1 Mini but the longer sticks have to be rotated 45 degrees print plates 1 and 2 (all 9 tree layers and the stand). then print plate 3 and choose the stick with optimum tolerance. then print plate 4 with the correct stick selected. the default one is 9.8 and should be the best option for most printers edit: new files of the sticks has been uploaded. 9.5 and 9.4 version have been added, and all sticks have lead-in chamfers to decrease issues caused by bad PA/rounded corners

Buildable Christmas Pine Tree - fits 180 bed

Lego Stuff

&#34;Eternal Wave&#34; captures the dynamic beauty and power of the ocean in a stunning 3D depiction. This artwork showcases a towering wave frozen in time, reflecting the endless rhythm and energy of the sea, perfect for surf enthusiasts and ocean lovers alike. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA <a target="_blank" href="https://kingroon.com/collections/3d-printer-pla-filament?sca_ref=6268797.MtX4KIZPrO" rel="nofollow noopener">Kingroon Black</a> Transmission Distance: 0.4 PLA <a target="_blank" href="https://eryone3d.com/collections/anniversary-sale/products/matte-pla?ref=uqcriwyg" rel="nofollow noopener">EryOne Matte NAVY BLUE</a> Transmission Distance: 1.5 PLA <a target="_blank" href="https://kingroon.com/collections/3d-printer-pla-filament?sca_ref=6268797.MtX4KIZPrO" rel="nofollow noopener">KINGROON Blue</a> Transmission Distance: 4 PLA+ <a target="_blank" href="https://s.click.aliexpress.com/e/_DcIeqfV" rel="nofollow noopener">Jayo Mint Green</a> Transmission Distance: 4.5 PLA+ <a target="_blank" href="https://s.click.aliexpress.com/e/_DcIeqfV" rel="nofollow noopener">Jayo Sky Blue</a> Transmission Distance: 4.5 PLA <a target="_blank" href="https://s.click.aliexpress.com/e/_DDjc1SR" rel="nofollow noopener">Jayo Matte White</a> Transmission Distance: 3.5 Swap Instructions: Start with Black At layer #12 (1.04mm) swap to NAVY BLUE At layer #16 (1.36mm) swap to Blue At layer #18 (1.52mm) swap to Mint Green At layer #25 (2.08mm) swap to Sky Blue At layer #29 (2.4mm) swap to White for the rest. If you like my work, drop me a follow!🤜🤛 How to do more than 4 colors on a single AMS? To use more than 4 colors with a single AMS is pretty simple when it comes to HueForges. Always start the print from either Bambu Studio or Bambu Handy App - This will allow you to map the rolls of filaments to a certain slot in the AMS: <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493776/design/2024-04-18_0f99fb49a11e7.png"> Now map the first 4 colors (which should already be inserted in the AMS to Slots 1 - 2 - 3 - 4 Once thats done move to maping colors 5 - 6 - 7 - 8 to respectively AMS Slots 1 - 2 - 3 - 4 again! <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493776/design/2024-04-18_55b3ae6ccce94.png"> This will allow you to Change the rolls of filament once the printer is done with that color. For example, in the picture above once we are done with the Black color (Which is usually first) we are going to remove the black roll (you can do that while printing) with White, then once Charcoal Black is done we are going to change that to Red, Dark Gray to Yellow and we are done. ~ You can do that with as many colors as you need! If you like my work, drop me a follow!🤜🤛

Eternal Wave - Filament Painting

hueforge

Sneaker

@Repkord on Printables created this. I uploaded it under the Share model and will receive no points for downloads. The description is copied from the Printables page. Any donate or affiliate links go directly to @Repkord.&nbsp;----&nbsp;Welcome to RepRack! A modular, inexpensive, functional, easy to source, mass filament storage and spool holder system. Wall mountable or for use on the desktop. RepBox compatible. All source files are included to either 3D print or laser cut your own. The rail system is compatible with our new <a target="_blank" href="https://www.prusaprinters.org/prints/135700-slip-rod-cover-for-reprack-and-repbox" rel="nofollow noopener">slip rod covers</a> allowing you to print directly from the rack in any number of configurations.&nbsp;To give you a sense of expense a 10 foot long RepRack holds ~50 spools and costs about $20 or so in materials depending on how you decide to make it.&nbsp;<a target="_blank" href="https://www.repkord.com/products/reprack-starter-kits" rel="nofollow noopener">If you prefer to buy starter kits directly from Repkord rather than make yourself you may do so here</a>&nbsp;Ready to make your own? Read on:&nbsp;The hallmark of the RepRack system is its versatility. You may wish to use it for storing large amounts of filament spools neatly on your walls. Perhaps you want a small rack to hang above your printer that you can print directly from. Maybe desktop use with anti-skid feet is your preference? Perhaps you want a rack you can load and unload from your <a target="_blank" href="https://www.repkord.com/collections/repbox-2/products/repbox-2-the-3d-printing-spool-management-solution" rel="nofollow noopener">RepBox</a>… we've got you covered there too.Take a look at the photos to get a sense of how the system works. You can print or laser cut as many or as few of the RackHangers as you need. If you are printing them we HIGHLY recommend using the thickest nozzle you can as that will greatly increase the part strength. Locate the hangers everywhere you can anchor it to a wall stud or something secure. For hanging options you may use continuous french cleat strips or the provided individual brackets. If using printable brackets again use the thickest extrusion you can for the most strength and locate them closer together. Laser cut hangers may be spaced up to 32" apart OC typically if using ¼" thick (6mm) material. For laser cutting we recommend melamine or plywood. Never plain MDF. 3/16" (4-5mm) May also be suitable if used in closer spans. When in doubt, more is better.<h4>BILL OF MATERIALS</h4>Non-Printable Parts:<ul><li>½" EMT (~19mm Outer Diameter pipe) Conduit commonly found at local hardware supply stores like <a target="_blank" href="https://www.homedepot.com/p/1-2-in-x-10-ft-Electric-Metallic-Tube-EMT-Conduit-853428/100400405" rel="nofollow noopener">Home Depot</a>, Lowes, ACE, or other regional home stores. In addition you may be able to source it at any local Electrical supply store. Simply cut to length using a standard pipe cutter, hacksaw, abrasive cutoff wheel or similar metal cutting tool. Often times home stores can cut to length for you if you plan what you need ahead of time.</li><li>#6 x 5/8" (16mm) Thread Forming Screws for Plastics… also known as Plastite screws. These screws work really well fastening 3D printed parts to other materials. If you need a source for these <a target="_blank" href="https://www.repkord.com/products/6-x-5-8-16mm-thread-forming-screws-for-plastics-50-pack" rel="nofollow noopener">Repkord sells them in packs of 50 here</a>.</li><li>#8 x 3" (75mm) Wood screws for anchoring cleats to wall. You'll need at least two per printable cleat, less if you cut your own cleats. The total number needed will of course depend on how long your RepRack installation is. We HIGHLY recommend anchoring into studs or solid material. Wall anchors may be used as well but you will need to decide how many and what spacing is appropriate for the load intended.</li><li>Optional French cleat… see the provided drawing below for cutting your own french cleat strips. You will need to drill and countersink your cleat at whatever intervals you decide are appropriate for proper anchoring to the wall. <a target="_blank" href="https://www.repkord.com/collections/repbox-2/products/repkord-wall-mount-kit" rel="nofollow noopener">Wall mount kits with a 485mm (19") long cleat and fasteners are available from Repkord here.</a></li></ul>Printable / Laser Cuttable Parts (USE PETG FOR BEST RESULTS):<ul><li>Hanger Sides… at least 2 but as many as you need for the length of rack you're trying to build.</li><li>Rod Clamps… for laser cut hangers you'll want two clamps per hanger. There's an option to use the “U” style if you decide to clamp the pipe to the bracket after you've already run the pipe through it. Its sometimes easier to get your wall mount spacing right this way. The standard clamps are a bit more robust but you need to attach them prior to threading the rod through the hanger holes.</li><li>Optional Printed single wall mounts… If you're not using continuous runs of french cleat you'll need as many of these as you have hangers. Print them using the thickest extrusion you can for maximum part strength.</li></ul>Optional Add-Ons:<ul><li><a target="_blank" href="https://www.prusaprinters.org/prints/129972-rackstand-repwinder-stand-for-repbox-231-and-repra" rel="nofollow noopener">Rack stands / RepWinder stands </a>- Go here for the cardboard spool / <a target="_blank" href="https://www.prusaprinters.org/prints/6174-repwinder-v214" rel="nofollow noopener">RepWinder</a> stand solution compatible with <a target="_blank" href="https://www.repkord.com/products/repbox-2-the-3d-printing-spool-management-solution" rel="nofollow noopener">RepBox 2.3.1</a> and up and RepRack.</li><li><a target="_blank" href="https://www.prusaprinters.org/prints/131429-rackroller-open-source-flange-roller-add-on-for-re" rel="nofollow noopener">Rack Rollers / RepBox Compatible Bearing Flange Rollers</a></li><li><a target="_blank" href="https://www.prusaprinters.org/prints/135700-slip-rod-cover-for-reprack-and-repbox" rel="nofollow noopener">Slip Rod Cover for EMT for printing directly from the pipes</a></li><li><a target="_blank" href="https://www.repkord.com/products/repkord-wall-mount-kit" rel="nofollow noopener">French Cleats for RepBox, RepWinder, RepRack, and Catch Bin kits.</a></li></ul>Files are available to all. We appreciate your recognition of our brand as the creator of this system and are very excited to see how you use it. Remixing for personal use is allowed but we do kindly request that you maintain our branding if doing so. Your support of our company allows us to continue to create and share projects like this with the community. If you would like to see more open source contributions like this from us please consider donating whatever amount you feel is fair to help our efforts here: <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=2C3K3DV44QAFQ" rel="nofollow noopener">https://www.paypal.com/donate/?hosted_button_id=2C3K3DV44QAFQ</a>&nbsp;By no means is this required but it is ALWAYS appreciated.

RepRack: Open Source Spool Holder And Storage System by Repkord

filament storage

Axl_Axlsn

This toilet roll holder combines an elegant design with timeless and interchangeable individuality.&nbsp;Choose from 3 designs ( find them when downloading the STL-files ) or create your own tray with a material thickness of 5mm for a firm fit in the holder.&nbsp;Additional stability can be ensured with an M5 screw.&nbsp;All files can be printed without support.If you like the design follow me for more and hit the like button :)

Toilet Paper holder with shelf

for the house

16 cm oyster shelves with print in place cleats.

Oyster shelves print in place with cleats

shelves

pstumpp2005

fox skull

skulls

nmbc

PenolopyBulnick

I really liked my flexible link-based necklace with interchangeable gems and though they weren&#39;t super popular, I decided to continue with creating different versions. This is the version with Emerald cut gems. &nbsp;It took more trial and error than the other versions to get the gems fitting just right, but I&#39;m pretty happy with the fit. &nbsp;The Print Profile for the gems has been specifically set up to have concentric top and bottom infill for multi-colored filaments, but it should also work fine for other filaments. Also, if you are going to print multi colored filaments for the gems, I recommend either printing them FACE UP or printing on a smooth plate. &nbsp;All the links snap together. I like to use 15 of these which is about 16.5&#34; long. I would say each link adds about 1 1/8&#34; to give you an idea of how many you need. &nbsp;The gems are designed to pop in from the front.&nbsp;If you haven&#39;t seen the previous ones, the links are meant to be printed in flexible TPU ONLY and the gems are PLA. &nbsp;Previous Versions: &nbsp;Original Larger Hexagon: <a target="_blank" href="https://makerworld.com/en/models/85288#profileId-91178" rel="nofollow noopener">https://makerworld.com/en/models/85288#profileId-91178</a>matching Hexagon earrings: <a target="_blank" href="https://makerworld.com/en/models/91064#profileId-97412" rel="nofollow noopener">https://makerworld.com/en/models/91064#profileId-97412</a> Smaller Circular: <a target="_blank" href="https://makerworld.com/en/models/116973#profileId-125762" rel="nofollow noopener">https://makerworld.com/en/models/116973#profileId-125762</a>

Flexible Emerald Link Choker with Gems

Jewelry

Canadian Gamer

Legend of Zelda - Link Silhouette - 7 Colour  I Designed a friction Fit Frame that can be found here for 200x200 Hueforges <a target="_blank" href="https://makerworld.com/en/models/381229#profileId-281475" rel="nofollow noopener">https://makerworld.com/en/models/381229#profileId-281475</a>&nbsp;If you&#39;re looking for a commercial license to sell my prints, or to make a custom design request, please head over to my Patreon where those options are available: <a target="_blank" href="https://www.patreon.com/CanadianGamer3DPrintsEDM" rel="nofollow noopener">https://www.patreon.com/CanadianGamer3DPrintsEDM</a> NOTE: There are two print profiles - One is set up for a green / gold colour palette, and the other is set up with Blue / Gold to match my Zelda print at someone&#39;s request. The Layer height changes occur at different heights in each profile. Make sure you are using the layer height instructions for the colour you want to print.&nbsp;This is the first Nintendo Themed hueforge that I&#39;ve made, but ill add others to this collection as I make them:<a target="_blank" href="https://makerworld.com/@CanadianGamer/collections/835925" rel="nofollow noopener">https://makerworld.com/@CanadianGamer/collections/835925</a>&nbsp;I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display. This means that the layer heights listed below in my printing instructions will not match my print profile (they will be off by 3) but the mm heights will still match! Do not change the print profile to match or it will not look the same!&nbsp;If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position&nbsp;Please post a picture of your printed copy! I&#39;d love to see it!&nbsp;If you like my work and want to leave a tip to help with the costs of filament donations can be made here:<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=9BVH6Q453Y2K8" rel="nofollow noopener">https://www.paypal.com/donate/?hosted_button_id=9BVH6Q453Y2K8</a>&nbsp;— Printing Instructions---&nbsp;*****GREEN / GOLD*****&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0 PLA Generic Dark Green Transmission Distance: 2 PLA BambuLab Matte Pine Green Transmission Distance: 1 PLA Sunlu Green Transmission Distance: 6 PLA Bambu Basic Gold Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA Generic White Transmission Distance: 3Swap Instructions: Start with Black At layer #9 (0.72mm) swap to Dark Green At layer #11 (0.96mm) swap to Pine Green At layer #14 (1.2mm) swap to Green At layer #15 (1.28mm) swap to Gold At layer #19 (1.6mm) swap to Yellow At layer #23 (1.92mm) swap to White for the rest.&nbsp;&nbsp;&nbsp;*****BLUE &amp; GOLD***** Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA Sunlu Black Transmission Distance: 2.1 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Matte Marine Blue Transmission Distance: 3 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA Bambu Basic Gold Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA Generic White Transmission Distance: 3Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Dark Blue At layer #11 (0.96mm) swap to Marine Blue At layer #14 (1.2mm) swap to Ice Blue At layer #16 (1.36mm) swap to Gold At layer #20 (1.68mm) swap to Yellow At layer #23 (1.92mm) swap to White for the rest.&nbsp;&nbsp;

Legend of Zelda - Link Silhouette - 7 Colour

Zelda 

Brant

This is the five-petaled lily-like flower found in the Nier video game series.&nbsp;&nbsp;Highlights:<ul><li>Great for cosplay or home decor</li><li>The petals, stem, leaves, and base are all separate parts so you can use the petals for other things</li><li>The stamen of the flower makes use of your printer's purge lines</li><li>Prints well with glow in the dark filament for a glowing flower</li></ul>&nbsp;&nbsp;Filaments used:<ul><li>Petals (matte white): <a target="_blank" href="https://amzn.to/42BB9HM" rel="nofollow noopener">https://amzn.to/42BB9HM</a></li><li>Petals (GITD blue): <a target="_blank" href="https://amzn.to/3uDrQdH" rel="nofollow noopener">https://amzn.to/3uDrQdH</a></li><li>Stem, leaves, and base (green): <a target="_blank" href="https://us.store.bambulab.com/products/pla-tough?variant=41002792288392" rel="nofollow noopener">https://us.store.bambulab.com/products/pla-tough?variant=41002792288392</a></li></ul>&nbsp;&nbsp;Printing notes and assembly:<ul><li>This can be printed on one plate or four plates (for petals, stem, leaves, and base)</li><li>If making any changes, ensure the following:<ul><li>Petals and leaves have tree supports enabled</li><li>Petals and leaves have adaptive layer height enabled</li></ul></li><li>To get the color of the tip of the stem to match the petals, use an AMS or add a pause around height 152.20 to swap colors</li><li>From my testing, you may need a tiny bit of pressure to attach the petals to stem and stem to base but it should stay secure</li><li>BE CAREFUL WITH THE LEAVES — INSERT THEM INTO THE STEM AT AN ANGLE</li></ul><figure class="image image_resized" style="width:58.63%;"><img src="https://makerworld.bblmw.com/makerworld/draft/515452/2024-02-09_948b14f772224.png"></figure><ul><li>For the stamen (center hole at the top of the stem), I’ve tested it to have a snug fit with around 4-6 purge lines (only 1-2 lines needed if you're resourceful with your folding/cutting)<ul><li>Fold each purge line in half</li><li>Insert the folded line into the base until no more can fit</li><li>Cut the lines to your desired length</li><li>Use your finger to press down into the center hole and fan out the cut lines</li></ul></li></ul>

Lunar Tear

Flowers

Jamboodle

Just in time for St Pats Day. Four Color / Layer Shamrock Mandala. Layered multicolor print has little waste and is an easy print. Would make a great wall hanging for the holiday. &nbsp;Please give it a like and check out my other projects&nbsp;Thanks and Happy Printing!

Shamrock Mandala

St Patrick’s Day

TripleGWorkshop

No supports, scales up but probably not down. 5 Shapes to pick from. A fun fidget toy! Try out the quick "test patch"&nbsp;This seriously made my PC smoke with many millions of facets! I had to scale down the detail of the larger pieces to get them in. Please report any issues. Thanks and enjoy!<figure class="image image_resized" style="width:72.76%;"><img src="https://makerworld.bblmw.com/makerworld/draft/512508/2024-01-27_w1cyleffymtm.jpg"></figure><h2>Please Check out the whole collection!!  <a target="_blank" href="https://makerworld.com/en/u/2785986344/collections/517683" rel="nofollow noopener">https://makerworld.com/en/u/2785986344/collections/517683</a></h2><figure class="image image_resized" style="width:73.08%;"><img src="https://makerworld.bblmw.com/makerworld/draft/512508/2024-02-04_fe935871921a5.jpg"></figure>&nbsp;

Flexible Circle Fabric ⦿ 5 Sizes

Chainmail

mail.iou

Nichirin Samurai Sword miniThis is a telescopic sword inspired by the Nichirin sword in the Japanese manga "Demon Slayer: Kimetsu no Yaiba". This is a telescopic katana that is printed in parts and then assembled. You can choose to print different colors and strengths for different parts. The handle is capped to facilitate future maintenance and blade replacement. However, the disadvantage of this is that the printing time will increase. If you are sure that you can print an all-in-one print, you can refer to my previous telescopic knife work Reverse Blade Sword mini: <a target="_blank" href="https://makerworld.com/en/models/114630" rel="nofollow noopener">https://makerworld.com/en/models/114630</a>&nbsp;Notice It is recommended to use PLA+、PETG for printing. If your filament has insufficient strength, please increase the fill overlap to more than 40%.&nbsp;Assembly instructions: 1. Put the blades in order. 2. Close the handle cover.<img src="https://makerworld.bblmw.com/makerworld/draft/501755/2024-01-12_3dee38ac87bac.png"> 3. Push the fastener carefully.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/501755/2024-01-12_5fed3ee8af84b.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/501755/2024-01-12_9da5e647fb736.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/501755/2024-01-12_12ec4019f870e.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/501755/2024-01-12_947ac7f8b2c99.png"></figure></td></tr></tbody></table></figure>&nbsp;

Nichirin Samurai Sword

Props

Lox-3D

Deutsch&nbsp;Ich Empfehle vor jeden Druck das Filament für mindesten 6 Stunden bei 55° zu Trocknen um kleine Blässchen bildung im Druck zu vermeiden die durch feuchtigkeit entstehen.&nbsp;Die Druck Profiele sind perfekt für TPU abgestimmt es gibt eins für Transparentes TPU und eins für Normales TPU dazu muss nur das Testmodel gelöscht werden und seine eigene STL eigefügt werden.&nbsp;Das Model eignet sich super für ein Farbtest mit verschiedenen schichten von 0,2mm - 1mm dicke um die Transparents zu sehen.&nbsp;Ebendso ist ein kleiner Test dabei um zu sehen ob die Lochdiminsion passen.&nbsp;---------------------------------------------&nbsp;Englisch&nbsp;I recommend drying the filament for at least 6 hours at 55° before each print to avoid small bubbles in the print caused by moisture.&nbsp;The printing profiles are perfectly tailored for TPU - there is one for transparent TPU and one for normal TPU. All you have to do is delete the test model and add your own STL.&nbsp;The model is great for a color test with different layers of 0.2mm - 1mm thick to see the transparents.&nbsp;There is also a small test to see whether the hole dimensions are correct.

Perfect TPU printing Profile / Color Sample & hole test

Profiles

flelaurin

This is my attempt to make the health tracker for the board game HeroQuest.The original idea come from"Miniature Hobbyist'' youtube video :<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=ybWJUM5HIac&ab_channel=MiniatureHobbyist"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/ybWJUM5HIac" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>I remix this projects:<ul><li><a target="_blank" href="https://www.thingiverse.com/thing:6223657" rel="nofollow noopener">https://www.thingiverse.com/thing:6223657</a></li><li><a target="_blank" href="https://www.thingiverse.com/thing:4754753" rel="nofollow noopener">https://www.thingiverse.com/thing:4754753</a></li></ul>&nbsp;

Heroquest character tracker

HeroQuest 

Catherine Doucet

Everything that has to do with barbershops and the culture around them has always been something I'm passionate about. So why not combine this passion with 3D design to make a stunning barbershop lamp?&nbsp;Transform your space into a vibrant haven with the barbershop's lamp. Showcase it in various setups - whether on a table, on a wall or on an IKEA Skadis board.&nbsp;Extra parts needed :<ul><li><a target="_blank" href="https://ca.store.bambulab.com/products/led-lamp-kit-001" rel="nofollow noopener">LED Lamp Kit</a> from Bambu Lab</li><li>CA Glue *Do a dry fit before the final glued assembly</li></ul>&nbsp;If you choose to mount the light, please use the ‘’Mounted Lamp'' print profile as the clamp, mounting slides and different side columns are included. Take note that the wall mount is designed to be used with #8 screws.<figure class="table" style="width:98.58%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td>Smooth sides for the ‘’Table Version''</td><td>Sides with a notch to hold the clamp and arrows pointing up for help during assemble on the ‘’Mounted Version''</td></tr><tr><td><figure class="image image_resized" style="width:40.67%;"><img src="https://makerworld.bblmw.com/makerworld/draft/543861/2024-02-07_1d3111b6346b5.png"></figure></td><td><figure class="image image_resized" style="width:32.48%;"><img src="https://makerworld.bblmw.com/makerworld/draft/543861/2024-02-07_78ecd3160daf5.png"></figure></td></tr></tbody></table></figure> Features specific to 3D printing have been used in this project, notably the following ones :<ul><li>Flexibility of thin prints : the lamp shade is printed flat on the buildplate to minimize color changes. The flexible nature of thin 3D prints makes it so the lamp shad can be bent into the right shape for this project</li><li>Adaptive layer height in the slicer is used on the top piece, this ensures that there is a smooth finish throughout the print</li></ul>&nbsp;Printing tips :<ul><li>Print the ‘’Lamp Shade'' profile as well as either the ‘’Table Version'' or ‘’Mounted Version'' profile</li><li>Make sure your bed is clean and that bed adhesion is not a problem, especially for the lamp shade print - Don't hesitate to use glue</li><li>Make sure you let the lamp shade cool down properly before taking it off the bed</li><li>Make sure to use the provides print profiles as the settings have been precisely tuned</li></ul>&nbsp;Post processing before assembly (see <a target="_blank" href="https://youtu.be/_SX_UYGywwM" rel="nofollow noopener">Youtube Video HERE</a> for assembly instructions) :<ul><li>Remove the supports from the top and bottom pieces</li><li>If you chose the mounted version, remove the supports from the clamp</li><li>If you chose the IKEA Skadis mounting slide, cut the brim off of the pegs and remove the supports</li></ul>&nbsp;

Barbershop Lamp - For LED Lamp Kit 001

Lamp Kits

make3dtc

Shadowbox Paris Single layer to plug in Version 2 Update: In version 2 there are no longer 12 layers but only 6 the individual layers have been put together so that there are only 6 layers. This shadow box consists of 6 individual layers which are inserted into the shadow box one after the other.Finally, the back part is clicked into the shadow box with light force so that it snaps into place.The layers can be created according to your wishes and colors the pictures only serve as an example.&nbsp;In total, the shadow box consists of the following 8 parts:First layer frontSecond layerThird layerFourth layerFifth layerSixth layerBack partFrame&nbsp;&nbsp;&nbsp;Schattenbox Paris Einzelene Layer zum Stecken Version 2 Update: In der Version 2 sind es keine 12 Layer mehr sondern nur noch 6 die Einzelnen Layer wurden zusammen gefügt das es nur 6 Layer werden. Diese Schattenbox besteht aus 6 Einzelenen Layern diese nach einnander in die Schattenbox eingefügt werden.Zum Schluß kommt das Rückteil dran dieses wird mit Leichterkraft in die Schattenbox geklickt das diese dort einrastet.Die Layer können nach ihren Wünsche und Farben erstellt werden auf den Bilder dient es nur als Beispiel.&nbsp;Ingesamt besteht die Schattenbox aus den Folgenden 8 Teilen:Erste Layer VornZweite LayerDritter LayerVierter LayerFünfter LayerSechster LayerRückenteilRahmen

Shadowbox Paris Single Layer to plug in Version 2

Shadow Boxes

lithophanes

kad lab

Kadla B1.Series 1 of a collection. This vase stands out with its colorful minimal detail. By separating it into two parts, it is possible to print even sizes up to 400mm. No support needed, easy to print. 200mm, 300mm and 400mm available. Scaling might work. In the pictures you see a black vase made of GreenyHT black and a golden detail made of PLA Silk.&nbsp;I recommend printing the parts individually and orienting them as shown in the picture. Depending on which bottom part is desired (wall mounting or not), show and hide the parts

Vase Kadla B1 200 - 400mm with optional wall mount

vases

Mdesign

Larged easter egg with voronoi pattern for tea candle. No suppors needed. Enjoy !☺️🤌

Easter egg with voronoi for tea candle

Easter

PrintsByPerlas

<figure class="image image_resized" style="width:29.07%;"><img src="https://makerworld.bblmw.com/makerworld/draft/305870/2023-12-16_9c48264c6a24.jpg"></figure>Container Cover Dual Purpose Rack - Organizer and Dryer&nbsp;Printed with Bambu PETG Basic (Black)&nbsp;Designed to be a solution of keeping storage lid organized.&nbsp;<ol><li>Honeycomb to help keep with the air flow to dry quicker.</li><li>Drain holes in the bottom for water.</li><li>Measured to fit most cabinets.</li></ol><figure class="image image_resized" style="width:30.65%;"><img src="https://makerworld.bblmw.com/makerworld/draft/305870/2023-12-16_f4928a0b8299c8.jpg"></figure>Filament Used: <a target="_blank" href="https://amzn.to/477gj3L" rel="nofollow noopener">https://amzn.to/477gj3L</a>

Container Cover Dual Purpose Rack - Organizer and Dryer

For the House

M&T_Fujawa

T Rex Light Box

LightBoxes

JimmiboY - Youtube

Back with version 2 of the storage box system for ikea skadis. as you might have seen my first version that was stackable. this version fits side ways, and are stack able. and they come in diffrent sizes. Look for my other designs.&nbsp;<figure class="media"><div data-oembed-url="https://youtube.com/shorts/sCkYCk8ipaI?si=LPSb8c1VUgzuQoWe"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=sCkYCk8ipaI"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/sCkYCk8ipaI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>

Ikea skadis Singlebox V2

skadis stuff

rky.91

Here is a new design for my slinkies collection.Other models available here: <a target="_blank" href="https://makerworld.com/en/@rky.91/collections/510046" rel="nofollow noopener">https://makerworld.com/en/@rky.91/collections/510046</a>&nbsp;This is a cute heart-shaped slinky that&#39;s easy to print. No support required. The model is 10cm tall and I printed mine using Bambulab Silk PLA. Feel free to try more crazy colors!&nbsp;After printing, gently separate all the coils of the toy: It shouldn&#39;t be difficult to separate the first coil. You can start the process using the tip of a small knife by prying into one of the gaps between the coils.&nbsp;Please ignore the warning about the &#39;floating cantilever&#39; that appears before slicing: the model leaves small gaps by design.&nbsp;You can scale the template in the X or Y direction to make the heart shape bigger. I recommend keeping the height as it is.&nbsp;&nbsp;Below are some of the beautiful prints from the community&nbsp;<figure class="image image_resized" style="width:50.88%;"><img src="https://makerworld.bblmw.com/makerworld/draft/825642/2024-01-30_7ec7538deb44b.jpg"></figure><figure class="image image_resized" style="width:49.77%;"><img src="https://makerworld.bblmw.com/makerworld/draft/825642/2024-01-30_e6bdfd8ecc641.jpg"></figure><figure class="image image_resized" style="width:48.8%;"><img src="https://makerworld.bblmw.com/makerworld/draft/825642/2024-01-30_51fd7f4cddd1c.jpg"></figure><figure class="image image_resized" style="width:48.48%;"><img src="https://makerworld.bblmw.com/makerworld/draft/825642/2024-01-30_69552a529ea14.jpg"></figure>

Heart Slinky

valentines

sipura

Hello,UPDATE 26/1/2024:You can check you our new model, same like this one but XL bigger. Inner containers are compatible.<a target="_blank" href="https://makerworld.com/en/models/157759#profileId-173134" rel="nofollow noopener">https://makerworld.com/en/models/157759#profileId-173134</a> &nbsp;&nbsp;UPDATE 19/1/2024:You can check you our new model, same like this one but smaller. Inner containers are compatible.<a target="_blank" href="https://makerworld.com/en/models/146935#profileId-160286" rel="nofollow noopener">https://makerworld.com/en/models/146935#profileId-160286</a> &nbsp;My new model of the utility case.&nbsp;Simple print without supportAll parts are completely printed with PLA, only the gasket needs to be printed with TPU in order to close smooth and seal nicely.&nbsp;To assemble it, you need:6pcs M3 nuts2 pcs of screws M3x303pcs of screws M3x18&nbsp;Dimensions are in mm:&nbsp;<figure class="image image_resized" style="width:65.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-02-10_e25480cf53e6d.png"></figure><figure class="image image_resized" style="width:65.19%;"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-02-10_97292542d7a98.png"></figure>NEW:&nbsp;Now we made V2 model that has thicker hinges on each side by 1mm behind, and wall loops with 3pcs. For this model, instead of 3pcs M3x18mm screws, you now need 3pcs M3x20mm.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-01-13_6bc78c7c28bab.jpeg"></figure>&nbsp;Also, if you need some custom accessories for all our models, you can contact us on our patreon page which is in bio.&nbsp;Enjoy printing and using this useful case.

Utility OG case

Containers

Squish3D

Do NOT adjust the thickness (Z) in your slicer!! The layers will not come out right. You CAN adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.&nbsp;These were my settings and colors for my print that you see in the picture. Your results may vary depending on the filament you use and if you have your own HueForge profile saved with different settings.&nbsp;This is a long print without a Height Range Modifier (11.5ish hours). If your slicer has the capacity to do a height range modifier and you want to cut some time off, add one! The “Swap Instructions” below are for without a height modifier.&nbsp;Height Range Modifier Instructions (if your slicer is capable):You will want to add a height range modifier to the object of 0-1.44, with a layer height of 0.16 mm.The “Swap Instructions” listed below will not match up for the layer number listed, but the mm listed for each is still accurate and correct.&nbsp;Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm&nbsp;Nozzle: 0.4 Filaments Used: PLA Sunlu Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 5 PLA Sunlu Gold Transmission Distance: 5 PLA Sunlu White Transmission Distance: 5&nbsp;Swap Instructions: Start with Black At layer #44 (1.88mm) swap to Red At layer #48 (2.04mm) swap to Gold At layer #50 (2.12mm) swap to White for the rest

Dragon in a Jar - HueForge

cool stuff

CopyKnight

Many have tried it, but no one has realized it yet.Until today, when the big market launch begins. First of all, I would like to thank the entire team that has invested weeks and hours in the development of this project. It has been designed, engineered, constructed and tested. It was worth it, because it is a complete success.Furthermore, it is hereby expressly declared once again that remixes of this product design are completely prohibited.There are several reasons for this. The main one is that there is no reason to remix this design, as it is not without reason that no more phase or rounding than necessary has been included. There is also no need to add a logo or remove logos. Which is why there are 7 different downloads to choose from.One is the original:1: Air-Stream-Freezer (it was called that for a reason)2: Bambulab logo with lettering3: Bambulab logo single4: Bambulab logo single5: Bambulab P1S version6: Bambulab P1P version7: complete without frills, branding or logoSo there should be something for every taste, which is why, as already written, there is no sensible reason (except that people like to decorate themselves with other feathers to take credit) to remix this product.It's bad enough that it will surely only be a few weeks before it's offered for sale on a huge Asian sales platform, like many designs that are offered for free to all on platforms like this one.If anyone thinks something could be improved, they are welcome to write to me about it. We will try to realize it. We are also working hard on designing a version for the X1C and X1E.It is recommended to use the stored print profile. And of course to print it in ABS. Layer height should be 0.1 with a 0.4 nozzle.A normal support should be placed at the bottom for the ventilation ring. Everything above this ring, which must be supported, can be blocked with a large support blocker, thus reducing the printing time. The print runs normally from bottom to top. If the slicer recommends placing it at a 45 degree angle, do not do this, place it on the floor. After printing, insert a finger into the ring from above to push the support out from top to bottom. Done. Now just glue in the two magnets (4x2 and 3x2) and enjoy the real 360 degree ventilation for all further prints.Have fun&nbsp;&nbsp;Viele haben es probiert, doch niemand hat es bislang realisiert.Bis heute, heute beginnt die große Markteinführung.Zunächst einmal möchte ich mich bei dem gesamten Team bedanken, das seit Wochen, Stunden in die Entwicklung dieses Projektes investiert hat. Es wurde entworfen, designt, konstruiert und getestet. Es hat sich gelohnt, denn es ist ein voller Erfolg.Des Weiteren wird hiermit noch einmal ausdrücklich erklärt, das Remixe von diesem Produktdesign vollständig untersagt sind.Dafür gibt es mehrere Gründe. Der Entscheidende ist, es gibt keinen Grund, dieses Design zu remixen, da nicht ohne Grund keine Phase oder Abrundung mehr als diese nötig sind mit verbaut wurden. Es muss auch kein Logo raufgemacht werden oder Logos entfernt werden. Weshalb 7 verschiedene Downloads zur Auswahl stehen.Zum einen das Original:1: Air-Stream-Freezer (der wurde nicht ohne Grund so genannt)2: Bambulab Logo mit Schriftzug3: Bambulab Schriftzug einzeln4: Bambulab Logo einzeln5: Bambulab P1S Version6: Bambulab P1P Version7: komplett ohne Schnickschnack, Branding oder LogoEs sollte somit für jeden Geschmack etwas dabei sein, weshalb es wie schon geschrieben, es keinen vernünftigen Grund gibt (außer das sich gerne mit anderen Federn geschmückt wird um Lorbeeren einzusammeln), dieses Produkt zu remixen.Schlimm genug, dass es sicherlich nur wenige Wochen dauern wird, bis es auf einer riesigen asiatischen Verkaufsplattform zum Verkauf angeboten wird, so wie viele Designs die auf Plattformen wie diese hier kostenlos für alle angeboten wird.Falls jemand der Meinung ist, es könnte etwas verbessert werden, darf er mich deswegen gerne anschreiben. Wir werden versuchen es zu realisieren. Ebenso arbeiten wir mit Hochdruck daran, eine Version für den X1C und X1E zu entwerfen.Es wird empfohlen das hinterlegte Druckprofil zu verwenden. Ebenso es natürlich in ABS zu drucken. Schichthöhe sollte 0.1 mit einer 0.4er Nozzle betragen.Es sollte eine normal Stütze unten für den Lüftungsring platziert werden. Alles was oberhalb dieses Ringes der zwingend abgestützt werden muss, sich befindet, kann mit ruhigem Gewissen anhand eines großen Stützblockers blockiert werden. somit verringert sich die Zeit beim Drucken. Der Druck läuft normal von unten nach oben. Fall der Slicer empfehlen sollte es auf den 45 Grad winkel zu stellen, macht es nicht, stell es auf den Boden. Nach dem Druck sollte mit einem Finger von oben in den Ring hineingefahren werden um die Stütze von oben nach unten rauszudrücken. Fertig. Nun nur noch die zwei Magneten einkleben (4x2 und 3x2) und die echte 360 Grad Belüftung geniessen, bei allen weiteren Drucken.Viel Spaß&nbsp;

True 360-degree fan flow with toroidal channel Air-Stream-Freezer P1S

P1s Upgrades

Game Stuff

jarvizar

3d miniature of Chicago, Illinois!&nbsp;Model created in Blender using the <a target="_blank" href="https://github.com/vvoovv/blosm" rel="nofollow noopener">Blosm</a> addon.&nbsp;&nbsp;Check out my collection of other miniature cities: <a target="_blank" href="https://makerworld.com/en/u/1935755220/collections/146964" rel="nofollow noopener">https://makerworld.com/en/u/1935755220/collections/146964</a>&nbsp;Larger version of Chicago including Navy Pier: <a target="_blank" href="https://makerworld.com/en/models/168068#profileId-184500" rel="nofollow noopener">https://makerworld.com/en/models/168068#profileId-184500</a>&nbsp;<h3>Printing & Slicing Details</h3>&nbsp;This model was designed to be printed with a 0.4mm nozzle and 0.16mm layer heights.Try using a 0.2mm nozzle (0.08mm layer heights) or scaling up for even finer detail!&nbsp;Note: If roads or other small details disappear after slicing, try lowering the extrusion/line width of external perimeters (outer walls) closer to 0.4mm OR use Arachne walls (can also enable “Detect Thin Walls”).&nbsp;<h3>Framing Details</h3>&nbsp;This model measures almost exactly 6.7in by 4.7in (170.5mm X 119.5mm) and should fit most 5x7 frames (assuming frame lip/overlap is around a quarter inch). Feel free to change the scale/size of the model(s) to meet your needs.&nbsp;Personally I use these cheap frames from Amazon: <a target="_blank" href="https://www.amazon.com/dp/B0C8HY7YSQ" rel="nofollow noopener">https://www.amazon.com/dp/B0C8HY7YSQ</a>And blue printer paper: <a target="_blank" href="https://www.amazon.com/Astrobrights-491618-Multipurpose-8-5-Inch-11-Inch/dp/B00006IDQT" rel="nofollow noopener">https://www.amazon.com/dp/B00006IDQT</a>&nbsp;I also included a fully printable frame (including a 1mm thick water plate) designed to fit all my miniature cities.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/551626/2023-12-27_7536c6348b762.webp"><figcaption>Gif of the Printable Frame</figcaption></figure>&nbsp;A frame is not required! This model looks great by itself and can be displayed almost anywhere.&nbsp;See my <a target="_blank" href="http://patreon.com/jarvizar" rel="nofollow noopener">Patreon</a> for a commercial license, early downloads, polls towards future models, and more!&nbsp;

Chicago Illinois 3D Miniature

Models

Saber3D

Check all my models out at <a target="_blank" href="https://saber-3d.com/" rel="nofollow noopener">www.Saber-3D.com</a> &nbsp;New dragons, creatures, and more released every month to my patrons, thank you for supporting my work! &nbsp;Follow our socials to see new models! <a target="_blank" href="https://www.instagram.com/saber.3d" rel="nofollow noopener">Instagram</a><a target="_blank" href="https://www.tiktok.com/@saber3d" rel="nofollow noopener">TikTok</a>&nbsp;This flexi dragon was designed to take less time but still give you the awesome look of a large dragon as well as make custom designs as easy as possible! Every part of this dragon can be easily painted in your slicer of choice, just make sure edge detection is turned off 😉&nbsp;Want to sell prints or just enjoy the instant access to all my models? join our All Access tier on <a target="_blank" href="https://www.patreon.com/Saber3D" rel="nofollow noopener">Patreon</a>. &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Articulated Crystal Dragon by Saber3D

Articulated Models

Big-Daddy

wanted to add xtouch screen to p1s and hide the cable through riser the case for the xtouch was from YouTube Teaching tech <a target="_blank" href="https://www.printables.com/model/611634-xtouch-enclosure-for-bambu-lab-p1ps" rel="nofollow noopener">https://www.printables.com/model/611634-xtouch-enclosure-for-bambu-lab-p1ps</a>&nbsp;V2 clean look changed cable entry.&nbsp;Added P1P front dash with usb cable track&nbsp;11/19 Added Right dash for button badge insert &nbsp;Just uploaded a micro sd card button for the blv ams riser<a target="_blank" href="https://makerworld.com/en/models/62302#profileId-64849" rel="nofollow noopener">https://makerworld.com/en/models/62302#profileId-64849</a><img src="https://makerworld.bblmw.com/makerworld/draft/334869/2023-11-11_b61a8ee317b23.png">

p1s-front-dash-with-Xtouch-screen

Printer Accessories

Mimi home decoration

<figure class="media"><div data-oembed-url="https://youtube.com/shorts/Ul6C26SBHn8?si=JSDeIM7aAtplIOYq"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=Ul6C26SBHn8"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/Ul6C26SBHn8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;edit :changed the infill of the weightseasy to print in 0,2 layerscan be print on A1 miniNo ams needed Body need a change at layer 15 , heads need change at layer 7 . ballast need 100% infill .my others designs<a target="_blank" href="https://makerworld.com/fr/u/2044748376" rel="nofollow noopener">https://makerworld.com/fr/u/2044748376</a>&nbsp;Edit added a base here<a target="_blank" href="https://makerworld.com/fr/models/91942#profileId-98337" rel="nofollow noopener">https://makerworld.com/fr/models/91942#profileId-98337</a>&nbsp;<figure class="media"><div data-oembed-url="https://youtube.com/shorts/OWOLGJ58vL0?si=_Injlm852ZGbdvg8"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=OWOLGJ58vL0"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/OWOLGJ58vL0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;

Flying bird

Fun Stuff

rostap

<h3>Arm mounting system </h3>It is a universal set of holders and arms. You can use this system as a notebook holder, tablet holder, monitor holder, camera or any other device holder or you can have it as a shelf holder.If you print a pair, you can made various tables.You can attach more arms togehter. I made some connecting parts and other accessories. There are no limits to imagination. I made it with increased strength and durability. If you add few perimeters the holders/arms can hold pretty good weight. &nbsp;&nbsp;&nbsp;Small light versionHolders reduced x 0.6 and then adjusted (hole sizes, gaps, etc.)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_ygt4l1gyz0rx.jpg"></figure><h4>Základní informace</h4><figure class="table"><table><tbody><tr><td>&nbsp;<figure class="image image_resized image-style-align-left" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_1vuk35qftkm3.jpg"></figure>&nbsp;</td><td>&nbsp;You can adjust the angle in ten degrees. Screw and nut fit on both sides. &nbsp;&nbsp;&nbsp;</td></tr><tr><td>You can tight and loose from both sides no matter where the nut is. </td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_5bbkp2ve4kgr.jpg"></figure></td></tr><tr><td><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_l4f3cs4r4hsf.jpg"></figure></td><td>There are various nuts and screws. Of of them counts with the allen screw (hex bolt) M8x40&nbsp;</td></tr><tr><td>You can also print the crew which can be tight and loose without gear- with the printed hex bolt screw. </td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_7dyjbvq16pqm.jpg"></figure></td></tr><tr><td><img src="https://media.printables.com/media/prints/165239/rich_content/5d2096ce-0223-4834-ade9-1fd6b3aec194/resize_img_6432.jpg#%7B%22uuid%22%3A%2292583698-0623-4e34-94da-bb853c30ae47%22%2C%22w%22%3A2016%2C%22h%22%3A1512%7D"> <img src="https://media.printables.com/media/prints/165239/rich_content/4dd49cb0-b7a2-4690-8a96-9c03407d2c2e/resize_img_6427.jpg#%7B%22uuid%22%3A%225c571a00-83c6-45bf-a6bb-97f04a44ed33%22%2C%22w%22%3A2016%2C%22h%22%3A1512%7D"></td><td>The holes for key in the screw and two arms have the same size as the holders in Honeycomb storage wall (https://www.printables.com/cs/model/152592-honeycomb-storage-wall). That means that you can hang different accessories on the arms. </td></tr><tr><td>There are various of arms. </td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_bdrw6oh1oh1y.png"></figure></td></tr><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_u06b8t58ztlv.jpg"></figure></td><td>ClampI made 3 different types - <ol><li>for the screw M5/M6 mounting spacing for holders 30x30mm</li><li>for the screw M5/M6 mounting spacing for holders 40x40mm</li><li>for the screw M5 mounting spacing for holders 40x40mm</li></ol>&nbsp;</td></tr><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_t3u1ipn1agdd.jpg"></figure></td><td>VESA rotating holder - 75mm</td></tr><tr><td>Combination for possitioning along the axis Z<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_7m1sfrwcw20k.jpg"></figure>&nbsp;&nbsp;</td><td>System - high table for tablet holder <img src="https://media.printables.com/media/prints/165239/rich_content/228c6e5e-a2a4-41ce-a79e-962f4006c973/resize_img_6430.jpg#%7B%22uuid%22%3A%22da81a7de-4dd3-453e-96dc-6c179e6bc32e%22%2C%22w%22%3A1512%2C%22h%22%3A2016%7D"></td></tr><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_11nh0grq3czm.jpg"></figure></td><td>There are holders for three tablets. Bottom width<ol><li>196 mm</li><li>250 mm</li><li>305 mm</li></ol>screw spacing 30mm</td></tr></tbody></table></figure><h4>Basic arms</h4>The only difference is the grid<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_0qsfmal86eys.png"></figure>&nbsp;<h3>Holders</h3>A few basic handles<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_wjg38olir4sz.png"></figure>&nbsp;<h4> </h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_ej2zf1avpe73.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_2ujybj6hyhzb.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_3i0br0eesaay.png"></figure>&nbsp;I printed small parts on the Prusa Mini, the arms on the Ender 3.&nbsp;My printing settings<ul><li>material: PETG</li><li>perimeters: 8 and more</li><li>infill : 30% and more</li><li>layer height 0.3 (with nozzle 0.6 layer height 0.4) (screw and nuts only 0.2mm layer height) </li></ul>&nbsp;