hasufel

可以收纳e61和其官方线材的收纳盒。无需支撑打印，打印完成将两个部件用胶水粘在一起即可

SanDisk E61收纳storage

computers

Maker1O1

Originally made by Boxandloop and licensed under CC-BYModified for cheaper servos by 3dxav- download the DocumentationOptimized for fast printing on Bambulab P1 / X1 DOME01 and brow_side is cutted in half, for easier printing, those need to be glued together.&nbsp;Original author:Iron Man MK5 HelmetUpdate 2: Uploaded mk5_sketch_ADJUSTABLE code file. With this file you can adjust global and individual servo movement. Line 6-7 --> Adjust overall movement of small servos. Do not make large changes (over 25-50) because the servos will be taken pass their physical ranges and damage can happen. Lines 27-38 --> Adjust each servo. Do not make large changes for main servos (over 100) for same reasons.Update: Apologies, uploaded an older version of code. Uploaded the correct version - mk5_sketch_11-28-2021.inoFully articulated, Wearable, Chargable. Easy to print, harder to build. Step by step guides are here to help you.While download is broken, please find files and extras here: <a target="_blank" href="https://thangs.com/m/35449" rel="nofollow noopener">https://thangs.com/m/35449</a>Video Guide: <a target="_blank" href="https://youtu.be/0pcbx-TdSnw" rel="nofollow noopener">https://youtu.be/0pcbx-TdSnw</a> Helmet in Action: <a target="_blank" href="https://youtu.be/f6bQGWkdc1A" rel="nofollow noopener">https://youtu.be/f6bQGWkdc1A</a>What's included: 28 STL files 3 Guides (build, wiring, printing) 1 Code file 1 Parts listFeatures: 10 servos driving the action of 10 parts in the facemask. Single powerbank drives everything and can be recharged while still inside, no batteries needed. 2 power switches, one for Arduino, one for Servos. Trigger is located in the chin. Wire management.Enjoy this build! If you really enjoyed, consider buying me a coffee: <a target="_blank" href="https://www.buymeacoffee.com/BoxAndLoop" rel="nofollow noopener">https://www.buymeacoffee.com/BoxAndLoop</a>FAQ: Can I scale this helmet? No, nope, not a chance. How big is this helmet? Will it fit my head? There is a "cage" you can print to test for fit. Can I see through the eyes? Yes, but not in the dark. Can I dim the eyes down? Not in this version, maybe in the future. Why do all the servos buzz when the helmet is open? 9g servos are not strong enough to keep everything open without power. Keeping the power to servos creates buzz. How long does one charge last? Not sure, but it is in the hours, not in minutes. How long will it take to print everything? Depends on your printer and nozzle size. On my Ender 5Pro with a 0.6mm nozzle, total print time is about 48 hours. How much filament do I need? 1kg roll should cover it all.

Iron Man MK5 Helmet 10 servos detailed instruction, modified for easier printing, and cheaper servo

props

happyboard.company

The Version 2 of the swirled lamp shade I created.&nbsp;Its as easy to print, as the first version. Orient it upside down and hit print. Set the seam alignment to random for a better result.&nbsp;You'll also need the LED Hardware Kit 001 adapter and the hardware Kit 001 itself. You can find a print profile of of the adapter on this page, or you can download it from the official Bambu Labs account. I altered the bajonette adapter for a quite tight fit. You will need some force to get it into place, but it will fit tight and snug. &nbsp;I used Bambu Lab PLA Marble for this lamp. &nbsp;0.2 mm layer height3 walls22% gyroid infill

Swirled Lamp Shade V2 for LED Kit 001

Lamps

MakerVerse Designs

Fully 3d printed crocs shoes<ul><li>Printed with Overture TPU</li><li>PLA for the snap button</li></ul>Important notes:<ul><li>It is for EU shoe size number 42 (male), but you can scale every part (CrocsL1,CrocsR1,Holder,Mount1,Mount2) to your size (use uniform scaling)</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-19_0266f756a989a.png"></figure><ul><li>If the shoe is too big to fit to the printers height, use the “WithSupport”-Version, rotate in Y-Axis (green) and use the cut tool in Bambu Studio to create a new flat surface parallel to the print bed<ul><li>I uploaded an .stl file without cut on the bottom for better scaling</li></ul></li></ul>&nbsp;<ul><li>There are two ways to print this:</li></ul><ol><li>Use a textured PEI bed and print it standing up without support</li><li>Or use another not so sticky bed and print it standing up with support</li></ol><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-12_cc0523cbae068.png">&nbsp;If you can&#39;t get enough of printed shoes, check out my new model (Slide Shoes, Adilette):<a target="_blank" href="https://makerworld.com/en/models/488792#profileId-401842" rel="nofollow noopener">https://makerworld.com/en/models/488792#profileId-401842</a><img class="image_resized" style="width: 41.76%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-06-08_bb258037ea2a1.png">Have fun with it and leave a like or subscribe if you like it!If there are any suggestions for improvement, feel free to write a comment.

Crocs Shoes - Fully 3d-printed

apparel

cforms

Shower wiper / squeegee Printplate #1 with PLAPrintplate #2 with TPU&nbsp;Happy cleaning 🖖&nbsp;designed by cForms

Shower squeegee -wiper - Duschabzieher -abstreifer

bathroom

Kollin1198

It fits GoPro 10-12.  Model has been updated to allow better fitting of certain components. (batteries and regular lens). 03-11-2024

GOPRO CASE INSERT

gopro

keeeal

<h2>N-DOF: The Modular Robotic Arm</h2>This project uses connectors that are compatible with <a target="_blank" href="https://www.thingiverse.com/thing:2194278" rel="nofollow noopener">Modular Mounting System (MMS)</a> and GoPro to join motorized robotic modules.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/1192592401/draft/2023-08-05_d2d94ee93b48c8.gif"></figure><h2>Features</h2><ul><li>Modular: Ideal for flexible use and re-use. Try different arm designs without having to re-print parts. Disassemble and reassemble with ease.</li><li>Limitless: Print the same part multiple times and chain them together. N-DOF = "N Degrees Of Freedom".</li><li>Extensible: Have a motor or actuator you want to use in your own robot? Design a joint with GoPro mounts separated by 30 mm... Now it is N-DOF compatible!</li><li>Compatible: There are a huge number of mounts for various objects that are already compatible with N-DOF. Search for "Modular Mounting System" or "GoPro".</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/1192592401/draft/2023-08-05_9edab726400658.png"></figure><h2>Included Modules</h2><ul><li>The included modules use print-in-place joints to keep part count low. They require supports when printing and a little force to move for the first time.</li><li>Included modules use NEMA 17 stepping motors.</li><li>The only non-printed parts required are M3 bolts to mount the motors.</li></ul>If you are thinking of designing a module that is compatible with N-DOF, these features are not a requirement.<h3>Base</h3><figure class="image"><img src="https://i.imgur.com/xpi3DVH.png" alt=""></figure><ul><li>Gear ratio = 6:1</li><li>Support blockers when slicing may help support removal.</li><li>If greater stability is required, print some <a target="_blank" href="https://www.thingiverse.com/thing:2194278" rel="nofollow noopener">MMS arms</a> to spread the legs out further.</li><li>2 x M3 bolts required to mount NEMA 17.</li><li>6 x legs.</li><li>1 x motor gear (with 12 teeth).</li></ul><h3>Gear Joint</h3><figure class="image"><img src="https://i.imgur.com/qK0Ncev.png" alt=""></figure><ul><li>Gear ratio = 4:1</li><li>Support blockers when slicing may help support removal.</li><li>This joint has an asymmetric range of motion: -60 deg to 150 deg.</li><li>3 x M3 bolts required to mount NEMA 17.</li><li>1 x motor gear (with 12 teeth).</li></ul><h3>Swivel Joint</h3><figure class="image"><img src="https://i.imgur.com/99MTfZ6.png" alt=""></figure><ul><li>No gearing.</li><li>This could be improved using planetary gears.</li><li>4 x M3 bolts required to mount NEMA 17.</li></ul><h2>Notes</h2><ul><li>Regular PLA might not be strong enough for the M5 bolts. I used <a target="_blank" href="https://polymaker.com/product/polymax-pla/" rel="nofollow noopener">PolyMax PLA</a> and have had no issues.</li><li>If extending the arm to great lengths, be sure to attach the base to a desk with a clamp so it doesn't tip over.</li><li>OpenSCAD code can be found at <a target="_blank" href="https://github.com/keeeal/n-dof" rel="nofollow noopener">https://github.com/keeeal/n-dof</a></li></ul>

N-DOF: The Modular Robotic Arm

robotics

Lucky 13 Toys

<h3>Dummy 13 is now on a CC BY 4.0 license!</h3>This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on your product page:<figure class="table"><table><tbody><tr><td><a target="_blank" href="https://makerworld.com/en/models/183780#profileId-202639" rel="nofollow noopener">DUMMY 13 Printable Jointed Figure </a>© 2023 by <a target="_blank" href="https://www.lucky13toys.com/" rel="nofollow noopener">Lucky 13 Toys </a>is licensed under <a target="_blank" href="http://creativecommons.org/licenses/by/4.0/?ref=chooser-v1" rel="nofollow noopener">CC BY 4.0 </a></td></tr></tbody></table></figure>Please help me build my identity as a creator by referring to this design by its original name. Don't pass off my work as your own product. Too many people are doing that already!&nbsp;Want to support future projects with a one-time donation? <a target="_blank" href="https://www.paypal.com/donate/?business=65FUQ2SJMYDDS&no_recurring=0&item_name=Thanks+for+supporting+Lucky+13%21&currency_code=USD" rel="nofollow noopener">Make a PayPal donation here!</a>&nbsp;&nbsp;&nbsp;<a target="_blank" href="https://www.printables.com/@soozafone/activity/4153" rel="nofollow noopener">This is my own work, originally uploaded to Printables.</a>&nbsp;Yes, Dummy 13 is now on MakerWorld.&nbsp;<h3>Please read before printing:</h3>This is a work in progress. It has been collecting virtual dust while I work on other projects, so I've decided to release it now in a “beta” state. I don't have a timeline for when the final version will be finished, but the current files are fairly complete - just lacking some perfectionist polish. Please understand that there is some room for improvement here. I welcome your feedback to help make this design the best it can be.&nbsp;What's finished right now: Design of all parts, except for minor tweaks based on feedback. Basic instructions.&nbsp;What's not finished: Parts on runners for better adhesion without brims. More detailed instructions. Fusion 360 and STEP files for Printables Club members (please note that these will not be available until the design is finalized). Any updates based on feedback.&nbsp;Can I sell it? Yes, Dummy 13 is distributed under a CC BY 4.0 license that does allow commercial use, provided that you provide proper attribution.&nbsp;If you'd like to say thanks and help support future development, you can make a one-time donation <a target="_blank" href="https://www.paypal.com/donate/?business=65FUQ2SJMYDDS&no_recurring=0&item_name=Thanks+for+supporting+Lucky+13%21&currency_code=USD" rel="nofollow noopener">here</a> :)&nbsp;---&nbsp;<h3>Introducing Dummy 13!</h3>(…working title.)This is another variant on <a target="_blank" href="https://www.printables.com/model/148367-lucky-13-printable-jointed-figure" rel="nofollow noopener">Lucky 13</a>, and I actually started designing it before <a target="_blank" href="https://www.printables.com/model/422353-mini-13-printable-jointed-figure" rel="nofollow noopener">Mini 13</a> or <a target="_blank" href="https://www.printables.com/model/555170-easy-13-printable-jointed-figure" rel="nofollow noopener">Easy 13</a>. As you can probably tell, my goal here was to bring some more humanlike proportions to the figure, while also improving the way everything fits together.&nbsp;My hope is that this will be an easier print than the original Lucky 13, though still a step up from Mini and Easy.&nbsp;<h3>Printing</h3>As with the original, Dummy 13 is made up of an inner "frame" with a layer of “armor” over top. You can use the material of your choice for the armor, but you should print the frame with a strong and sturdy material like ABS, ASA, or PETG. I mostly use ASA.&nbsp;PLA is not recommended for the frame. If you print the frame in PLA and complain that it broke or went floppy, I'm going to be like, “yeah dude, I told you not to.”&nbsp;All parts print without supports and you should not need to reorient anything. Bed adhesion is the toughest part of this print. For better adhesion try slowing down your first layer, printing external perimeters first, and adding a brim if needed. Use 0.15mm layers (0.2mm first layer).&nbsp;You can use the included 3MF files with pre-plated parts, or arrange the individual parts yourself. If a part starts with “2x” or “4x,” print that many copies. There are also a couple extra bits (a simple staff accessory and an adapter for the <a target="_blank" href="https://www.printables.com/model/563861-lucky-13-display-base-20" rel="nofollow noopener">display base</a>) that are included separately.&nbsp;Recommended print settings (100% scale, 0.4mm nozzle)<figure class="table"><table><tbody><tr><td rowspan="2">Material</td><td>Frame parts</td><td>ABS, ASA, or PETG</td></tr><tr><td>Armor parts</td><td>Any</td></tr><tr><td rowspan="2">Layer height</td><td>First layer</td><td>0.2 mm</td></tr><tr><td>Other layers</td><td>0.15 mm</td></tr><tr><td colspan="2">Infill</td><td>20% rectilinear</td></tr><tr><td colspan="2">First layer speed</td><td>25% of default</td></tr><tr><td colspan="2">Elephant foot compensation</td><td>0.15 mm</td></tr><tr><td colspan="2">Supports</td><td>None</td></tr><tr><td colspan="2">Brim</td><td>As needed (depends on bed adhesion)</td></tr><tr><td colspan="2">Additional settings</td><td>☑ Print external perimeters first</td></tr></tbody></table></figure>&nbsp;<h3>Assembly</h3>Follow this video for assembly instructions. Pay attention - some parts look very similar!<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=Rwu3UP0cHZw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Rwu3UP0cHZw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;<h3>Customizing</h3>Dummy 13 should be compatible with most handheld accessories made for my other designs. Check out Lucky 13's <a target="_blank" href="https://www.printables.com/model/148367-lucky-13-printable-jointed-figure/remixes" rel="nofollow noopener">remixes page</a> for a good starting point!&nbsp;&nbsp;This design has already been stolen and stripped of attribution a hundred times over. Please don't add to that.

DUMMY 13 Printable Jointed Figure (beta files)

dummy13

Theodor

Bitcoin shaped cookie cutter.&nbsp;you can check my profile for more cookie cutters 🙂.

Bitcoin cookie cutter

kitchen

Litolunar

20% fill Without supports. &nbsp;And 100% fill in the logos.&nbsp;Tools needed:<ul><li>Welder</li><li>Tin</li><li>Screwdriver</li><li>Pliers</li><li>Lighter</li></ul><figure class="image image_resized" style="width:50.93%;"><img src="https://makerworld.bblmw.com/makerworld/draft/699266/2024-03-13_6adf9eb4af93f.jpg"></figure>&nbsp;Materials:<ul><li><a target="_blank" href="https://es.aliexpress.com/item/1005001411945792.html?spm=a2g0o.order_list.order_list_main.372.138b194d28Gq5c&gatewayAdapt=glo2esp" rel="nofollow noopener">High intensity LED</a></li><li><a target="_blank" href="https://es.aliexpress.com/item/32807032859.html?spm=a2g0o.order_list.order_list_main.380.138b194d28Gq5c&gatewayAdapt=glo2esp" rel="nofollow noopener">Battery</a></li><li><a target="_blank" href="https://es.aliexpress.com/item/32806159516.html?spm=a2g0o.order_list.order_list_main.467.138b194d28Gq5c&gatewayAdapt=glo2esp" rel="nofollow noopener">Battery holder</a></li><li><a target="_blank" href="https://es.aliexpress.com/item/1005005341202402.html?spm=a2g0o.order_list.order_list_main.386.138b194d28Gq5c&gatewayAdapt=glo2esp" rel="nofollow noopener">Usb c board</a></li><li><a target="_blank" href="https://es.aliexpress.com/item/1005006132144823.html?spm=a2g0o.productlist.main.7.595ft8PKt8PKfZ&algo_pvid=9937444f-0632-4cc7-a0e9-251359c48c22&algo_exp_id=9937444f-0632-4cc7-a0e9-251359c48c22-3&pdp_npi=4%40dis%21EUR%213.46%211.83%21%21%2126.55%2114.02%21%402103854617103473858987211eea8e%2112000035902824343%21sea%21ES%21197670400%21&curPageLogUid=erA4vf0EDvhZ&utparam-url=scene%3Asearch%7Cquery_from%3A" rel="nofollow noopener">Switch</a></li><li><a target="_blank" href="https://es.aliexpress.com/item/1005005911075741.html?spm=a2g0o.productlist.main.1.337c5f14Q6DWcP&algo_pvid=b20bbf03-bccb-4e5b-904d-adf050930eca&algo_exp_id=b20bbf03-bccb-4e5b-904d-adf050930eca-0&pdp_npi=4%40dis%21EUR%212.76%212.68%21%21%2121.13%2120.55%21%402103847a17103475050232872ea920%2112000034811093207%21sea%21ES%21197670400%21&curPageLogUid=o7KVlA7uBmIJ&utparam-url=scene%3Asearch%7Cquery_from%3A" rel="nofollow noopener">Heat shrink</a></li><li>6 x Screws (M6x25)</li><li>6 x brake nuts</li><li>1 x Resistance 10 ohms</li><li>1 x washer</li><li>Electric cables</li><li>Glue</li></ul>&nbsp;<figure class="image image_resized" style="width:61.8%;"><img src="https://makerworld.bblmw.com/makerworld/draft/699266/2024-03-13_e93506f46f363.jpg"></figure>&nbsp;&nbsp;&nbsp;&nbsp;Assembly instructions:&nbsp;&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/699266/2024-03-13_c1fd65dc9472f.png"></figure>&nbsp;<figure class="image image_resized" style="width:45.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/699266/2024-03-13_3b37f1ad28a58.jpg"></figure><figure class="image image_resized" style="width:44.13%;"><img src="https://makerworld.bblmw.com/makerworld/draft/699266/2024-03-13_33c21b9a3f631.jpg"></figure>&nbsp;<figure class="image image_resized" style="width:54.25%;"><img src="https://makerworld.bblmw.com/makerworld/draft/699266/2024-03-13_6776c7a6b3ae1.jpg"></figure>&nbsp;<a target="_blank" href="https://www.instagram.com/reel/C4axH8-NaaX/?igsh=N3BvZW16d3hwZTcy" rel="nofollow noopener">https://www.instagram.com/reel/C4axH8-NaaX/?igsh=N3BvZW16d3hwZTcy</a>&nbsp;&nbsp;

Batsignal with LED kit and battery

toys

UniversalMaker

Introducing the Plant Sign KitCard—a versatile and practical solution for labeling your plants with style. This kit includes customizable cards designed to add a touch of elegance to your garden or indoor plant collection.Just break out your needed signs! Pro tipp: Use your slicers emboss feature to add custom text&nbsp;Please Download ⬇ and Like ❤ to support my work. Thank you 🤗 Happy Printing!

Plant Sign KitCard

plants

Hart 3D Prints

Very Helpful and if you use a good color filament makes your desk look way better. You can print the drawers all as one or separate.You don’t need supports onInfill any higher than 15&nbsp;If you want to have a monkey pen holder next to it <a target="_blank" href="https://makerworld.com/en/models/249433?from=search" rel="nofollow noopener">click here</a><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000249384/design/2024-03-13_233f8de7761b9.webp">

Desk Organizer

organize

Fletch

The Saturn V rocket miniature model developed by NASA to take astronauts to the moon. Some details were omitted due to how small they were or poor results after slicing. Available in both multicolor and single color. The rocket can stand vertically without any support once assembled.&nbsp;This model should fit all Bambu printers. You will need to move the model to the corner on the A1 mini to fit both the model and prime tower.&nbsp;Update 3/14/24 - <a target="_blank" href="https://makerworld.com/en/models/254506" rel="nofollow noopener">Added a stand to display the Saturn V rocket that can be found here</a>.&nbsp;NotesThe antenna is pretty small, be careful when removing from the kit. When pushing the antenna through the third stage, you can cut the tip off if needed. Do not cut the side that prevents the antenna from going through the third stage (the side that has an extra extrusion closest to the Saturn V label). Once the antenna is through the third stage, you can give it light tug to secure it in place.&nbsp;Assembly<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_0c0b17411535b8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_88e6226af64dd8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_c99b1d1591bfb.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_c63a7fd7539ff8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_725c5a900205e8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_a0f5646572fbd8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_38eaf64fc600e.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_bf8c15a68b8df8.jpg">

NASA Saturn V Kit Card

kit card

al-bandit

I printed the frame with PLA-CF and it is very stable. All that remains is to press in the 2mm threaded inserts with a soldering iron. The spacer rings are used to create the correct distance between the frame and the copter. The threaded inserts should have the following dimensions: M2 x 4 (length) x 3.2mm (diameter)

BetaFPV pavp pico frame for 3s batteries with antenna holder for TBS receiver

drones

L.C.

The Powkiddy RGB30 is a retro handheld emulation game console that runs on Linux. It's design and shape allows for a case that be used on the front or back of the device, allowing the case to be used as a grip case or a protective case.&nbsp;There are two models of this case. This is a slim case. Both can be used as a grip or reversed for protection. I also suggest lining the clips with a 0.5mm adhesive felt pad for worry free slip on and off.<ul><li>Standard - A standard grip design</li><li>Ergo - A grip design that has a bit of an ergonomic touch to it</li><li>Split (See below)</li></ul>I used PLA+, 0.2mm height, 15% infill, and 2 perimeter. I also tried variable layer lines on the curved areas and they came out great. You may notice the top clip will need a long support going up to it since it is a straight 90 degree bend. For those having issues printing this, I also created another option, the “Split” option.&nbsp;For the split options, the top clip area is split off from the main body of the case for easier printing. In order to combine the two, I highly suggest sanding down the joining surfaces with something like 200-300 grit sandpaper to rough things up, then gluing with super glue. I used Loctite Professional as well as Gorilla Super Glue with much success.&nbsp;If you feel that the case is too tight to your liking, I suggest scaling in all directions in a tiny amount (100.1 or 100.2, etc).Check out my profile if you also have a Anbernic RG405M for similar cases. Happy gaming!

Powkiddy RGB30 Reversable Grip Case

consoles

3D Print Masters Hub

Utility Knife 178mm LG<ul><li>Good for general use, opening boxes, tape etc...</li><li>Scale as necessary</li><li>3MF configured with 4 walls and Gyroid infill.</li><li>Please like and subscribe! More to come!</li></ul>🔥🔥 Check out my PRO MODELS HERE! <a target="_blank" href="https://cults3d.com/en/users/FabulousFilaments/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/FabulousFilaments/3d-models</a> 🔥🔥&nbsp;&nbsp;&nbsp;&nbsp;

Utility Knife

tools

Large Poop Chute Bin for X1 or P1<ul><li>Two depth to choose from. Large capacity and narrow.</li><li>80mm (3&#34;) Deep, NARROW No Color Assignment</li><li>110mm (4.31&#34; Deep, LARGE, No Color Assignment</li><li>Slim walls</li><li>Simple print</li><li>🔥🔥See my must have 3D Printing tool collection! <a target="_blank" href="https://makerworld.com/@3DPrintMastersH/collections/593651" rel="nofollow noopener">https://makerworld.com/@3DPrintMastersH/collections/593651</a></li></ul>

Large Poop Chute Bin for X1 or P1 Printers

x1c upgrades

PZI 3D

Universal Valve CapUniversal Cap for schrader valve

Universal Valve Cap

automotive pieces

3D Prints This Week

IF YOU CHANGE THE SIZE, KEEP THE “Z” AT 100%. I CANNOT GUARANTEE QUALITY IF YOU CHANGE THE “Z”&nbsp;Load black and white into ams. If you don't have ams, see below&nbsp;Start with black and swap to white at layer 28.&nbsp;If you like the way it comes out, feel free to drop a tip in the link below.&nbsp;https://www.buymeacoffee.com/3dprintsth3

Nintendo Presents / Keychain / Mario / Pokemon / Zelda

keyring

TripleGWorkshop

Nothing special just a giant bottle.<figure class="image image_resized" style="width:88.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/71362/2023-10-07_liddmqj6romu.jpg"></figure>

Giant-sized Bottle Screw Top - No Support

(If you shrink the size, keep “z” at 100. It will be too thin if you don't)&nbsp;Load black, dark gray, lite gray, and white into ams.&nbsp;If you don't have ams, see below.&nbsp;&nbsp;Swap Instructions:Start with BlackAt layer #7 (0.64mm) swap to Dark GrayAt layer #12 (1.04mm) swap to Lite GrayAt layer #18 (1.52mm) swap to White for the rest.&nbsp;If you like the way it comes out, feel free to drop a tip in the link below.&nbsp;https://www.buymeacoffee.com/3dprintsth3

Mario DeathStar / StarWars / Nintendo / Wall Art / 2d art

hueforge

Load Yellow, Blue, Black, and White into AMS.&nbsp;If you like the way it comes out, feel free to drop a tip in the link below.&nbsp;https://www.buymeacoffee.com/3dprintsth3