hakanserce

ThreeD-Michael

<figure class="table" style="width:80%;"><table><tbody><tr><td style="vertical-align:top;width:50%;">News 2024-04-04:Upon request, I designed an<a target="_blank" href="https://makerworld.com/en/models/413220" rel="nofollow noopener"> XL version</a> of this scraper with 30% longer blades:<figure class="image"><a href="https://makerworld.com/en/models/413220" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/673497/2024-04-04_1745f08c588f7.png"></a></figure></td><td style="vertical-align:top;width:50%;">News 2024-03-10:Please also check out my new <a target="_blank" href="https://makerworld.com/en/models/242420" rel="nofollow noopener">Blade Dispenser</a> for this Bed Scraper:<figure class="image"><a href="https://makerworld.com/en/models/242420" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/673497/2024-04-04_7fcc902ba8562.png"></a></figure></td></tr></tbody></table></figure>Model Description:Since the cutting edges of plastic bed scrapers wear quickly, I was not happy with the existing designs. They simply required too much filament to print.&nbsp;That&#39;s why I developed this optimized bed scraper that holds replaceable blades. Each blade weighs just 1.2 grams - and since each blade has two cutting edges, only 0.6 grams of filament is required per cutting edge. It couldn&#39;t be more economical, and you can now replace the blades more often without feeling guilty.&nbsp;I recommend my print profiles for this design:<ol><li>As kit card Since this is a design for the Kit Card Design Contest, I created a Kit Card print profile.</li><li>As individual parts If you want to use the bed scraper right away, choose this print profile.</li><li>32 blades With this print profile, 32 blades can be printed at once. If you want to print fewer blades, simply delete the unnecessary ones from the print bed in the print profile.</li></ol>Print Settings:This design has been optimized for printing with a layer height of 0.2 mm, so please do not use a different value. The first layer should have a line width of at least 0.5 mm. In order to get the sharpest possible blade, you should choose a smooth printing surface if possible.&nbsp;Assembly:That is very easy. Simply slide the blade into the handle. But be careful - the blades are sharp, so don&#39;t push them in with your finger, but insert them loosely and then push them all the way by pressing the blade on a solid surface.

Optimized Bed Scraper

3D Printing Tools 

IK3Digital

Freshly designed a set of modern Planters; i hope you like them.You will have lots of hours of fun printing this models; even more if you use 2 or 3 different colors!Happy printing!&nbsp;-No supports-0-10% infill-Scale as you need

MODERN SET OF 16 PLANTERS AND VASES

gifts

DonMatis

One Piece wall art for decoration, can be painted with more colours after.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:<ul><li>PLA+ Sunlu Black</li><li>PLA+ Sunlu Gray</li><li>PLA Overture Light Gray</li><li>PLA Bambu Labs Basic White</li></ul>Swap Instructions:<ul><li>Black until layer #5 at 0.48mm</li><li>Gray until layer #10 at 0.88mm</li><li>Light Gray until layer #19 at 1.6mm</li><li>White for the rest.</li></ul>

One Piece (fanart) - Hueforge

Anime

Hueforge

12cm fume extractor to 13cm filter adapter