hahaxihaha

lerouxmaxence_69

Faze4 robotic arm came to be when i made a working 3d printable cycloidal gearbox and saw some potential in it. After that i designed whole arm around it. It uses 6 stepper motors, so it is a 6 axis robot arm. While designing this arm i focused on low backlash and good design of arm. All wires are hidden and arm is really rigid even tho it is 3d printed. You will find the BOM list and the assembly instruction bellow

Faze 4 - Ultimate Robotic Arm - 3D print 

精品

大容量芦丁鸡喂食盒，可拆分，易清洗。实物图为初代实验品，但是已经拥有全部设计初衷，并且我在初代实验品上进行了几处优化。1、初代实验品太高太深，打印后表面有轻微形变。所以减少了高度和深度2、因为主体零件变形，底座无法安装需要美工刀裁切才能安装。底座添加了外框。&nbsp;个人建议用透明材料进行打印，方便观察饲料剩余量。

大容量芦丁鸡喂食盒

宠物

ostat

<h3>OpenSCAD project to create vacuum hose connectors.</h3>Intended for generating connections that would allow connecting vacuum hoses and tools of different diameters together.Parametric settings support a few connections types. The connections types can be used on ether end of the adapter.&nbsp;The project is actively maintained by myself. Please submit bugs and suggestions at the GitHub repo. <a target="_blank" href="https://github.com/ostat/vacuum-hose-adapter-openscad" rel="nofollow noopener">ostat/vacuum-hose-adapter-openscad</a>.<h2><img class="image_resized" style="width: 38.95%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000481868/design/009a8b5b-07b6-4bf0-8809-e2ad229be092.gif"></h2>&nbsp;Connector types<figure class="table" style="width: 100%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td> Hose connector  The hose connector is the most generic connector. Its intended to be pushed inside a hose or over an existing connector. We can enable a stop to prevent the adapter being pulled in to the hose, and barbs for soft style pipe.  Options<ul><li>Length<ul><li>The length of the connection end</li></ul></li><li>Diameter<ul><li>Internal or external diameter of the intended connector.</li></ul></li><li>Taper<ul><li> Tapered to allow for a tight push fit</li></ul></li><li>Barbs</li><li>Stop</li></ul>Official Documentation <a target="_blank" href="https://docs.ostat.com/docs/openscad/hose-adapter/connectors/hose" rel="nofollow noopener">docs.ostat.com/docs/openscad/hose-adapter/connectors/hose</a></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000481868/design/2024-06-01_ed350451c1e9a.gif"></figure></td></tr><tr><td>NozzleA configurable nozzleOptions<ul><li>Nozzle Shape<ul><li>square: a square tip, where you can control the width and depth of the tip, and the corner radius</li><li>circle: A round tip, where you can control the radius.</li></ul></li><li>Nozzle_Size<ul><li>Size of the nozzle tip, in the format of [width, depth, length]</li></ul></li><li>Wall Thickness</li><li>Nozzle_Radius   </li><li>Nozzle_Offset    </li><li>Nozzle_Chamfer_Percentage     </li><li>Nozzle_Chamfer_Angle</li></ul>Official Documentation<a target="_blank" href="https://docs.ostat.com/docs/openscad/hose-adapter/connectors/nozzle" rel="nofollow noopener">docs.ostat.com/docs/openscad/hose-adapter/connectors/nozzle</a></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000481868/design/2024-06-01_470047bc1b6da8.gif"></figure></td></tr><tr><td>FlangeCustomisable flange for attaching to boxes or wall.&nbsp;Options<ul><li>Flange_Width     <ul><li>Width of Flange added to the connector diameter</li></ul></li><li>Flange_Thickness  <ul><li>Thickness of the flange</li></ul></li><li>Flange_Screw_Position <ul><li>Position of the screws added to the connector diameter</li></ul></li><li>Flange_Screw_Border     <ul><li>Minimum amount of the material around the screws</li></ul></li><li>Flange_Screw_Count     <ul><li>Number of Screw holes flange</li></ul></li><li>Flange_Screw_Diameter</li></ul>Official Documentation<a target="_blank" href="https://docs.ostat.com/docs/openscad/hose-adapter/connectors/flange" rel="nofollow noopener">docs.ostat.com/docs/openscad/hose-adapter/connectors/flange</a></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000481868/design/2024-06-01_3772a84429e99.gif"></figure></td></tr><tr><td>Magnetic flange connectionIntended for creating a quick removable connection. Allowing the hose to be quickly moved form device to device. The magnets should be slightly recessed so that the two faces get a good seal, allow extra depth if you want to avoid supports.  Main setting:<ul><li>Flange diameter: Internal diameter of the flange connection.</li><li>Flange thickness: The overall thickness of the flange. Magnet thickness plus 4mm seem to work well.</li><li>Connector length: The length of the connector before the tapered section will start.</li><li>Magnet count: Number of magnets to be added to the flange.</li><li>Magnet diameter: Diameter of the magnets (add 0.5 to measurement).</li><li>Magnet border: The amount material around the magnet.</li><li>Magnet thickness: Thickness of the magnets (add 0.5 to measurement, 1.0 to avoid supports).</li><li>lip: If an alignment ring should be supported, can be recessed or protruding, suggest recessed.</li></ul></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000481868/design/2024-06-01_32584b3954dc8.gif"></figure></td></tr><tr><td>Fixed connectorsConnectors that are not configurable as they are designed to be compatible with an existing connector type.&nbsp;Options<ul><li>Dyson V6 connector<ul><li>Compatible with Dyson V6 vacuums. </li><li><a target="_blank" href="https://docs.ostat.com/docs/openscad/hose-adapter/connectors/dyson" rel="nofollow noopener">Doco</a></li></ul></li><li>CAMLOCK connector<ul><li>Compatible with PeterH&#39;s </li><li><a target="_blank" href="https://www.printables.com/model/461256-shopvac-50mm-camlock-connectors-with-magnetic-catc" rel="nofollow noopener">camlock connectors</a> <a target="_blank" href="https://docs.ostat.com/docs/openscad/hose-adapter/connector/camlock" rel="nofollow noopener">Doco</a></li></ul></li><li>Dewalt DW735x<ul><li>Dewalt DW735 Planer </li><li><a target="_blank" href="https://docs.ostat.com/docs/openscad/hose-adapter/connectors/dw735" rel="nofollow noopener">Doco</a></li></ul></li><li>Cen-Tec quick connect <ul><li>Cen-Tec Female</li><li>Cen-Tec Male</li><li><a target="_blank" href="https://docs.ostat.com/docs/openscad/hose-adapter/connectors/centec" rel="nofollow noopener">Doco</a></li></ul></li><li>Makita quick connect<ul><li>Makita quick connect compatible (not tested)</li></ul></li><li>osVAC<ul><li>osVAC M32<ul><li>Male connector compatible with Original osVAC</li></ul></li><li>osVAC Male<ul><li>Male connector compatible with Original osVACneo, support variable diameter</li></ul></li><li>osVAC F32<ul><li>Female connector compatible with Original osVAC</li></ul></li><li>osVAC Female<ul><li>Female connector compatible with Original osVACneo, support variable diameter</li></ul></li><li><a target="_blank" href="https://docs.ostat.com/docs/openscad/hose-adapter/connectors/osvac" rel="nofollow noopener">Doco</a></li></ul></li></ul></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000481868/design/2024-06-03_fc82126a83115.gif"></figure></td></tr></tbody></table></figure>&nbsp;TransitionsUsing the above listed connectors we have a few options of how to transition between the end1 and end2.<figure class="table" style="width: 100%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td>Options<ul><li>Transition_Style<ul><li> taper+bend: Taper then bend</li><li>bend+taper: Bend then taper</li><li>organicbend: fully tapered bend</li><li>hull: Hull for multiple end count</li><li>flat: basic flat transition.</li></ul></li><li>Transition_End2_Count<ul><li>one to many adapter</li></ul></li></ul>&nbsp;There are many other options available,Official Documentation<a target="_blank" href="https://docs.ostat.com/docs/openscad/hose-adapter/transition" rel="nofollow noopener">https://docs.ostat.com/docs/openscad/hose-adapter/transition</a></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000481868/design/2024-06-02_d89390625a92a8.gif"></figure></td></tr><tr><td>Support for three unique connectors&nbsp;Updated 2024 to add support for an adapter with three different connectors.When using the Hull transition. You have the option to add a center adapter. This third adapter can be, end1, end2 or end3. (previously it could only be end2)<ul><li>pink, end1</li><li>blue, end2, you can adjust the angle and count.</li><li>purple, can be end1, end2 or end3</li></ul>  &nbsp;&nbsp;</td><td><figure class="image image_resized" style="width: 97.2%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000481868/design/2024-06-06_602056cb886a38.png"></figure></td></tr></tbody></table></figure>  Related models, for pre-generated adapters. <a target="_blank" href="https://www.printables.com/social/210306-max/collections/357939" rel="nofollow noopener">Hose Fittings collection</a><ul><li><a target="_blank" href="https://www.printables.com/model/316283" rel="nofollow noopener">Vacuum nozzles for all common hose sizes</a></li><li><a target="_blank" href="https://www.printables.com/model/297912" rel="nofollow noopener">Vacuum hose flanges to connect to flat surfaces</a></li><li><a target="_blank" href="https://www.printables.com/model/303766" rel="nofollow noopener">Dyson V6 hose attachments</a></li><li>Vacuum hose adapters<ul><li><a target="_blank" href="https://www.printables.com/model/283238" rel="nofollow noopener">Straight hose adapters</a></li><li><a target="_blank" href="https://www.printables.com/model/325999" rel="nofollow noopener">Y connector / splitter for all common sizes</a></li><li><a target="_blank" href="https://www.printables.com/model/284701" rel="nofollow noopener">30° elbow hose adapters</a></li><li><a target="_blank" href="https://www.printables.com/model/284834" rel="nofollow noopener">30° tapered elbow hose adapters</a></li><li><a target="_blank" href="https://www.printables.com/model/284846" rel="nofollow noopener">45° elbow hose adapters</a></li><li><a target="_blank" href="https://www.printables.com/model/284877" rel="nofollow noopener">45° tapered elbow hose adapters</a></li><li><a target="_blank" href="https://www.printables.com/model/284879/" rel="nofollow noopener">90° elbow hose adapters</a></li><li><a target="_blank" href="https://www.printables.com/model/284929" rel="nofollow noopener">90° tapered elbow hose adapters</a></li></ul></li><li>Magnetic Hose connectors<ul><li><a target="_blank" href="https://www.printables.com/model/283250" rel="nofollow noopener">50mm magnetic hose connectors</a></li><li><a target="_blank" href="https://www.printables.com/model/283255" rel="nofollow noopener">100mm magnetic hose connectors</a></li></ul></li><li>Barbed tube connectors<ul><li><a target="_blank" href="https://www.printables.com/model/328572" rel="nofollow noopener">Tube Fittings 4mm-24mm</a></li><li><a target="_blank" href="https://www.printables.com/model/328599" rel="nofollow noopener">Vacuum hose to tubing adapters for all common sizes</a></li><li><a target="_blank" href="https://www.printables.com/model/328572" rel="nofollow noopener">Tube Y connector / splitter fittings 4mm-24mm</a></li></ul></li></ul>

Parametric vacuum hose connector

常用零件

Hatta_3d

***NEW UPDATE***After numerous requests received in recent weeks, i have inserted a new print profile dividing everything into single parts and adding 2 new print plates to split the black and white parts.IF YOU LIKE IT SUPPORT ME WITH A NICE BOOST.&nbsp;This is a replica of the famous Gundam RX78-2.I recommend printing it using the pre-set profile.Please follow the instructions in the attached manual.Instructions identical to the original model.

Gundam RX 78-2.  1/144 Entry Grade (test replica)

高达

Sairae

New Crossbow Version! <a target="_blank" href="https://makerworld.com/en/models/425727#profileId-329413" rel="nofollow noopener">https://makerworld.com/en/models/425727#profileId-329413</a>&nbsp;Introducing the Q-tip Shooter V2! Simply load a one-sided Q-tip, pull back the spring, pull the trigger, and launch.&nbsp;Improvements from V1:Faster print timeImproved frame to better fit handThickened Q-tip pocket for better strengthWider bow for better trigger clearanceImproved trigger mechanismLink to V1: <a target="_blank" href="https://makerworld.com/en/models/393963#profileId-295078" rel="nofollow noopener">https://makerworld.com/en/models/393963#profileId-295078</a>&nbsp;&nbsp;Thank you to @eclien for the great revisions made to the original model.&nbsp;&nbsp;

Q-Tip Shooter V2

玩具、模型

机设小猪

对于A1mini进料显示旋转小圆片进行改装，图案为参考某站的投b按钮

旋转投币（A1mini喷头小配件）

打印机小配件

Wcad00

UPDATE 9 - 25.03.2024<ul><li>updated profile REQUESTS - added plate 17 - user @gurthyy  wanted a new module to accomodate a mac mini on its side - added a new two space combo module for mac mini and keyboard/mouse</li><li>updated profile REQUESTS - added plate 18 - user @wmeringolo wanted a new module for miniature painting  - added a new combo module for cup + brushes</li></ul>&nbsp;UPDATE 8 - 16.03.2024<ul><li>updated profile REQUESTS - added plate 13 - user @bambibam  wanted a new combo 1x module for sd/ microsd/usbA/ usbC  - so there is a new combo module available</li><li>updated profile REQUESTS - added plate 14,15,16 - user @gurthyy wanted a way to angle the organizer after specific desktops - introducing Pizza Slices - angled 30degrees modules coming in two snap-on formats for now, but with room for much more customisation. Plate 14 has the universal pizza slice base + simple catch all top; plate 15 has an split/organized top, and plate 16 has a slide-on interchangable name plate - see photos in print profile. Everything was printed and tested for a perfect fit - check photos</li></ul>UPDATE 7 - 05.03.2024<ul><li>updated profile ACCENTS - user @Xanders_Builds noticed an issue i missed with the ‘’steps' accent brims not fitting corectly - too loose - now it is updated and fits fine</li><li>updated profile REQUESTS - added plate 10 -one new module  ASP @user_2207529250  and @bluebeansisradi requested a stand for a ps5 and xbox controller - new module that occupies two spaces and needs to be snapped into place - stand for ps5 and xbox controller - i tested a ps5 controller but i dont have a xbox, but it has some tollerance so it should fit fine - in case it does not, i made the module from two parts , so the stand can be exchanged - please let me know if that is the case</li><li>updated profile REQUESTS - added plate 11 -one new mod  for DRAWER MAX. user @Nerraw asked for a method of separating the drawer into smaller spaces - i made a very simple method of doing that - 4 interconnectible separators that can also be printed individually or by neccesity i guess</li><li>updated profile REQUESTS - added plate 12 -one new module User @zach13 asked for a method of organizing documents vertically so this is my take on it. The iddea was to make it sturdy because it is a little tall and not to waste too much material - it is made from 3 pieces - a base plate and to organizing stands that fit slightly different from each other so that the papers will stay a little cuved to maintain vertical position</li></ul>&nbsp;UPDATE 6 - 15.02.2024<ul><li>updated profile REQUESTS - added plate 7  - Reinforced top plate for the DM. @bosho.liviu requested a top plate so modules could be placed on top - Now you can do that, it is symetric and compatible in every direction</li><li>updated profile REQUESTS - added plate 8,9  - Two new modules . @bdwilson asked for two modules that have removable interior trays - plate 8 has a new 1space tray module and plate 9 has a new tilted marker combo with one large tray on the bottom. The front part of the removable tray is also slanted for easy removal</li></ul>&nbsp;UPDATE 5 - 11.02.2024<ul><li>updated profile REQUESTS - added plate 5  - Tough Plate for the DM. @Heimwerkerbienchen requested a tougher top plate so monitor could pe placed on top of the DrawerMax - has all the toughness required bells and whistles but i really cant guarantee how it will hold up in time - in my oppinion the entire assembly should be printed in a tougher filament, because altough the new plate has a support structure, the drawer modules themselfs are pretty thin so the weight of the monitor will be on the walls</li><li>updated profile REQUESTS - added plate 6  - Half Bow ties. @bdwilson had a very good ideea to close the holes on exterior modules so introducing half bow ties </li></ul>&nbsp;UPDATE 4 - 28.01.2024<ul><li>updated profile REQUESTS - added plate 4  - Steps + Tape dispenser combo unit. altough it was not a request, the plate has the name of the user that gave me the ideea - thank you for that @lilrepete</li><li>the new module is compatible with existing ACCENTS, plus the security wheel and the blade can be printed in other colours to keep things fresh</li><li>the blade slides into the module and is interchangable in case teeth break or you just want another colour. if you feel it fits too tight just trim the seam of it and it will slide more easily</li></ul>UPDATE 3 - 23.01.2024<ul><li>updated the printing order to outer/inner - not a big issue but some had problems - now all is well</li></ul>UPDATE 2 - 22.01.2024<ul><li>added a new print profile called ACCENTS</li></ul>In keepign with the modularity theme and ultra customizability i aim to develop, i made some mix or match brims to add an extra touch of colour to your organizer. everything fits in place without glue or force and same as everything else it is easily changable in case you want to switch up your look and keep it fresh.photos attached in the profile so please check them out. i know the colours i actually printed are not the best but it was all the filament i have till i get my new shipment&nbsp;UPDATE 1 - 19.01.2024<ul><li>added a new print profile called DRAWER MAX</li></ul>it is a drawer module that occupies 4 slots, is stackable and also highly customizablethe first tray for it, as you can see in the pictures is for the spare parts that come with the BambuLab printer + some extras. Fits the parts for two printers.make sure you follow the instructions in its profile to get perfect fits everywhere<ul><li>added a new print profile called REQUESTS</li></ul>this profile contains the user requests for modules. each plate will have the users name on it. this is going to be the profile i will update regularly, based on requests.&nbsp;&nbsp;I’ve been wanting to do this project since I made the first desktop organiser.The problem I wanted to address was, what if in a month you want or need something else, more, or less space, something specific, more room for usb, cards, crayons, etc, how do you keep a new look with minimal to no effort?&nbsp;I’ve seen there have been many attempts to do this but none really took of, so I asked myself why? I think the main reason was lack of interest derived from lack of support. If newer modules aren’t created, interest goes down, and it becomes the same thing as a normal organiser.Of course we have the gridfinity system witch is great honestly and other similar to it, but they all rely on the same premise, a base to keep everything together, so if you are full, you need another base, but does the base you need right away exist? or are you going to be left with extra slots.&nbsp;Maybe I didnt do my research right, and there are other options, all I tried to do was to make something universal, easy to print, elegant, very customisable, and most of all, something that doesn’t depend on screws, magnets and on a base to keep it all tied. I printed 10 bowties In less than 20 minutes on standard, and hold together 7 modules (the ones I use) and you can lift and move them as a whole, without having them fall or break&nbsp;The bow tie joint isn’t my ideea, it’s been used in woodworking for centuries. It is a robust way of holding things together and works quite well here too, especially printed the way I arranged it on the plates . All the modules can be connected in whatever orientation you want, except the laptop stand, because it needs room on the small sides for the length of the laptop/tablet. But that is it - I kind of made that specifically for me, because I use it as an end piece that fits under my P1S (like my first organiser)&nbsp;I am starting with 12 modules and will make a new one every other week, based on suggestions I hope, because I dont think I have enough creativity. I will put out my own ideas because I do have more, but everyone has diferent needs so if you think you can get on board with the ideea I welcome all input, and I will try to make whatever you want. Remix culture is strongly encouraged.&nbsp;Modules in the 3mf:&nbsp;PLATE 1<ul><li>Usbcombo1 (11 usb sticks + 5 full size memory cards + tray for usb caps)</li><li>Phone combo (fits iphone 15 promax + airpods pro)</li><li>Post-its (two full size stacks of postits)</li><li>Steps (4 equal holders - superglue, ties, hex set, mini uv lamp)</li></ul>PLATE 2<ul><li>12 bow tie joints - enough for about anything</li></ul>&nbsp;PLATE 3<ul><li>Hex single - roomie organizer - can be further split with the splitters on plate 8</li></ul>&nbsp;PLATE 4<ul><li>Laptop wedge - macbook pro + ipad pro 12.9 + apple microfiber slot - made to be wedged under the x1 or p1</li><li>Laptop standard - - macbook pro + ipad pro 12.9 + apple microfiber slot + additional slot</li></ul>PLATE 5<ul><li>Tilted marker combo - 12 thick markers + pens and other + paperclip 3 + misc tray</li></ul>PLATE 6<ul><li>apple watch dock double - 2 apple watch charger pucks - like the original - cable management + full size post it tray</li></ul>PLATE 7<ul><li>Hex double - double the size of the single - can be further split with the splitters on plate 8</li></ul>PLATE 8<ul><li>5 split plates for the hex series</li></ul>PLATE 9<ul><li>apple watch dock single - 1 apple watch charger puck - like the original - cable management</li></ul>PLATE 10<ul><li>Usbcombo A - 6 usb sticks + 5 full size memory cards + tray</li></ul>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

精品

宠物

常用零件

高达

玩具、模型

打印机小配件

收纳