Graham R

JustPie

This is a work in progress for a simple trellis system. Note, there is an issue with the STL as the top surface prints a bit wonky.

Trellis supports

Garden

RETIRED GUY 3D PRINTING

TODAY WAS CLEAN THE FRONT LOAD DRYER FILTER AND CHAMBER DAYBEING RETIRED I HAVE TO CAREFULLY SCHEDULE ALL THE HOME TASKS SO THAT I AM NOT ON OVERTIMESEARCHING THE HOUSE FOR THE WAND TO DO THIS, I TURNED UP EMPTY HANDEDOFF TO THE VAC STORE I HEAD, NONE IN STOCK, AFTER 1.5 HRS OF RUNNIN AROUND AND SOME COLORFUL METAPHORS, MY BRAIN REMEMBERED I HAVE A 3D PRINTER30 MIN IN TINKERCAD AND I HAVE THIS1HR AND 30 MIN TO PRINT OR 2.5 BEERS AND IT WAS DONE3MF FILE PRINTS WELL AND IS A TIGHT FIT TO PUT TOGETHER, I ALSO USED A DROP OF GLUE TO ENSURE ITS SOLIDITYDEPENDING ON YOUR PRINTER OR FILAMENT YOU MAY HAVE TO SCALE UP THE CONNECTORS 1%I USED SOME BAMBU PLA I HAD LAYING AROUND, YOU MAY CHOOSE TO USE PETGWORKS FOR ME, SO IT SHOULD WORK FOR YOUSHOULD FIT 99.9% OF THE VACUUM HANDLES OUT THERE, BUT EASILY SCALED IF NOTTOTAL COST WAS 96 CENTS IN FILAMENTP.S. RETIREMENT IS WAY BETTER THAN FOLKS THINK IT IS GOING TO BEHAPPY PRINTING

FRONT LOAD DRYER VACUUM WAND

home and tools

PedroKV

Two different moders here:<ol><li>sealant cartridges wall holder. Use PETG. If you need more in a row, use a joint. You need screws of 4mm diameter.</li><li>sealant cartridges shelf stacker, for infrequently used cartridges.</li></ol>Print with PETG.

Sealant cartridges wall holder and shelf stacker

Garage

NaraaPrints

Embrace modern elegance and functionality with a one-of-a-kind 3D printed calendar, meticulously crafted for both aesthetic appeal and practicality. Printed in eSun PLA+ Black, & "Marble Effect / Stone Effect"&nbsp;Adds a touch of sophistication to any space. 📅📆

Desk Calendar 

office

MikeGTP

I designed this little shelving system to hold rolls of filament.&nbsp;No Hardware Required! All 3d Printed Parts!&nbsp;**UPDATE 1/07/24! I added a Stability & Connection Package! It allows you to add stability and connect multiple towers togetherDownload it here <a target="_blank" href="https://makerworld.com/en/models/128634#profileId-139327" rel="nofollow noopener">https://makerworld.com/en/models/128634#profileId-139327</a><figure class="image image_resized" style="width:33.79%;"><img src="https://makerworld.bblmw.com/makerworld/draft/377559/2024-01-07_f4977caec05b9.jpg"></figure><img src="https://makerworld.bblmw.com/makerworld/draft/377559/2024-01-07_52fcdd3f6e021.jpg">&nbsp;**UPDATE 1/09/24! I added a Tool/Parts Tray that mount directly on top of the shelf system!Downloaded it here! <a target="_blank" href="https://makerworld.com/en/models/131452#profileId-142595" rel="nofollow noopener">https://makerworld.com/en/models/131452#profileId-142595</a>&nbsp;<figure class="image image_resized" style="width:37.07%;"><img src="https://makerworld.bblmw.com/makerworld/draft/377559/2024-01-09_09d133952de3e.jpg"></figure><figure class="image image_resized" style="width:36.14%;"><img src="https://makerworld.bblmw.com/makerworld/draft/377559/2024-01-09_ba5b7b4a038dd.jpg"></figure>&nbsp;&nbsp;Some people do not have floor space, or maybe they live in an apartment and cannot adhere things to the wall.This is nice if you have some table space, it would even work on the floor.It allows you to grab a roll from the middle of your pile without toppling, or having to hold the other rolls.Each roll has its own shelf.&nbsp;Not everybody has 150 rolls of filament and needs massive commercial shelving&nbsp;You can stack them one tower tall, or make as many smaller towers that you want&nbsp;&nbsp;&nbsp;There are only 4 individual parts.&nbsp;Easy Assembly!&nbsp;<ol><li>Start off with 4 FEET</li><li>1 SHELF</li><li>4 POSTS</li><li>1 SHELF</li><li>Repeat until you are satisfied with the height, and then you screw on 4 POST TOP CAPS</li></ol>DO NOT OVERTIGHTEN!!&nbsp;I printed all of this at .20 Layer Height 20% Gyroid, 6 side walls and 5 top and bottom&nbsp;ENJOY!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377559/2024-01-06_372ee89eca09c.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377559/2024-01-06_12e4c0c2f17c9.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377559/2024-01-06_44b2afd09109a.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377559/2024-01-06_8c11222cd85a7.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377559/2024-01-06_f676ba7b6233d.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377559/2024-01-06_24ea10bd1b6bc.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377559/2024-01-06_39e1cdd6fa1ca.jpg"></figure>

Filament Spool Shelf System Customizable! No Hardware Needed MB Micro

printer mods

fay3dlab

I saw πxel8ed version of the suspended millenium falcon and i was inspired to make my own version.. i thought making the ship facing front with the strings looking like the streaking of lightspeed.. the falcon model by aaskedall from thingerverse was already a great design so i just used his model as a remix.. i did have to slightly change the model so it will print for a smaller version for my suspended millenium falcon..&nbsp;UPDATE:I have uploaded a new version model V3 that can be color picked for multicolor printing.. just learned how to do it.. unfortunately i cant edit the old print profile.. so you'll have to add them manually&nbsp;UPDATE 2:I made a LED version of the suspended millennium falcon that is backlite using led strips.. it is an addon part that will connected to the suspended ship.. so you just have to print the addon LED parts only.. not the whole ship.. i've upload the file at <a target="_blank" href="https://makerworld.com/models/113145" rel="nofollow noopener">https://makerworld.com/models/113145</a> <img src="https://makerworld.bblmw.com/makerworld/draft/491035/2023-12-30_4312a40409637.gif">

Garden

home and tools

Garage

office

printer mods

kids