Gottagetthat

Downloaded Goods

The PocketDriver is a sleek and practical EDC bit driver designed to hold up to 4 bits within its body. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000392803/design/2024-03-24_5225cf2ff542.jpg"></figure>&nbsp;It comes in 2 versions, a Large (can carry up to 4 bits) and a Medium (can carry up to 3 bits). Printing it is super easy, just make sure to have a brim and good bed adhesion so that the body doesn&#39;t fall mid-print.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000392803/design/2024-03-24_48cded1bffb47.jpg"></figure>&nbsp;At the base of the bit socket, there&#39;s room to affix a 6x2mm round magnet (a 5x1mm magnet also works). The model features 0.3mm tolerances for the bits, though depending on your printer and material, it may be slightly snug. If needed, using pliers to insert and remove bits a few times can help loosen the slot.&nbsp;<figure class="table"><table style="border:8px solid hsl(270, 75%, 60%);"><tbody><tr><td>If you would like to see more models like this, consider giving it a boost 🚀🚀🚀 . It helps me buy filament and material to prototype and test new models!</td></tr></tbody></table></figure>&nbsp;&nbsp;Happy printing! &nbsp;&nbsp;

PocketDriver - EDC Hex Bit Screwdriver w/ Storage

Tools

marpicio7

container for silica gel to put inside the bambulab reels. suitable both inside ams during printing and inside the bag for maintenancethe lid is marked, so you don't unscrew from the wrong side

silica gel container for bambulab spool

Bambu Tools

3D servis

The stand is able to tilt according to your needsEasy print without supports nor glueTested with PLA and PETG&nbsp;If you have problem with print of worm, you can print profile worm - 2 parts.  It's without glue, only connect together with nuts&nbsp;Added bottom part with lower “horns”<img src="https://media.printables.com/media/prints/734305/rich_content/d1cc0fb7-688a-4ff4-a083-0ce6453751c8/thumbs/cover/800x488/png/snimek-obrazovky-2024-02-21-v-155507.webp">&nbsp;Upload new version for ipad (tablet) <a target="_blank" href="https://makerworld.com/en/models/216325" rel="nofollow noopener">https://makerworld.com/en/models/216325</a><img src="https://makerworld.bblmw.com/makerworld/draft/615791/2024-03-01_48bd1d4c76084.jpeg">&nbsp;

Adjustable phone stand

Trevor Fun

JamesThePrinter

Set of trees and trunks that work interchangeably. The pieces thread together. The set includes 3 trunks and 5 trees:Trunks<ul><li>Short Trunk</li><li>Tall Trunk</li><li>Tall Trunk - Textured</li></ul>Trees<ul><li>Spiral Tree</li><li>Lattice Tree</li><li>Scalloped Tree</li><li>Wavy Tree</li><li>Diamond Tree</li></ul>Check out the rest of my Christmas models <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/69417" rel="nofollow noopener">here</a>!&nbsp;<h4>Print Settings</h4>Trunks need no special settings. While the trees do not require any special settings, I recommend the following:Spiral Tree<ul><li>25% infill in the base and center threaded area - this adds weight to the bottom and keeps the tree stable after a trunk is added</li><li>Manually move seams to the back side of each spiral. This will reduce curling of the leading edge.</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://media.printables.com/media/prints/614179/rich_content/5faa24f8-ced8-45b5-83ef-2f7ad102d1ec/spiral.png#%7B%22uuid%22%3A%22cf03bb2c-3622-43a3-87f6-ed5c101cf626%22%2C%22w%22%3A1600%2C%22h%22%3A1200%7D"></figure>Lattice Tree<ul><li>25% infill in the base and center threaded area - this adds weight to the bottom and keeps the tree stable after a trunk is added</li></ul>Scalloped Tree<ul><li>25% infill in the base and center threaded area - this adds weight to the bottom and keeps the tree stable after a trunk is added</li><li>0% infill for the rest of the tree</li></ul>Wavy Tree<ul><li>25% infill in the base and center threaded area - this adds weight to the bottom and keeps the tree stable after a trunk is added</li><li>0% infill for the rest of the tree</li><li>Use the Classic perimeter generator - Arachne leaves some unwanted edges</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://media.printables.com/media/prints/614179/rich_content/1d56fb74-827a-44e7-ac40-975484e4d77c/wavy.png#%7B%22uuid%22%3A%2228f92ead-6d9a-44c4-aaa3-8459b69435ff%22%2C%22w%22%3A1600%2C%22h%22%3A1200%7D"></figure>Diamond Tree<ul><li>25% infill in the base and center threaded area - this adds weight to the bottom and keeps the tree stable after a trunk is added</li><li>0% infill for the rest of the tree</li></ul>&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:Spiral Tree<ul><li>Bambu Lab Matte Latte Brown PLA</li><li>Prusament Simply Green PLA</li></ul>Lattice Tree<ul><li>Bambu Lab Matte Latte Brown PLA</li><li>Bambu Lab Matte Dark Green PLA</li></ul>Scalloped Tree<ul><li>Bambu Lab Matte Latte Brown PLA</li><li>Prusament Opal Green PLA</li></ul>Wavy Tree<ul><li>Bambu Lab Matte Latte Brown PLA</li><li>Inland Lutz Green PLA</li></ul>Diamond Tree<ul><li>Bambu Lab Matte Latte Brown PLA</li><li>Prusament Mystic Green PLA</li></ul>

Christmas Tree Set

Christmas

A rope spirals around to create a small bowl.All of my rope models can be found in collections on <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/12784" rel="nofollow noopener">MakerWorld</a> and <a target="_blank" href="https://www.printables.com/@JamesThePrinter/collections/326850" rel="nofollow noopener">Printables</a>.&nbsp;Print SettingsNo special settings needed&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:<ul><li>Polymaker PolyTerra Sapphire Blue</li><li>Polymaker PolyTerra Army Red</li><li>Polymaker PolyTerra Forest Green</li><li>Polymaker PolyTerra Pastel Banana</li></ul>

Rope Bowl

Household

MakeIt3D

<h2>Summary</h2>Tired of receipts, dust, and other debris clouding your workspace?This 3D Printable Mini Trashcan is the perfect tool for throwing away, storing, or disposing trash and other belongings.This print features a fully functioning built-in swing allowing you to store items inside without things accidently falling out.This item is easy to print featuring 2 main files<ul><li>LID STL</li><li>Bottom STL</li></ul>Total Size of the product is roughly 6 inches Height, 3.5 inches Width, 3.5 inches Length.Feel free to print out the designs and share photos of your results. I would love to see them. All MakeIt3D Designs are made and designed in-house. When you purchase any of these designs you do NOT have the rights to sell the digital files or printed models. 3D PRINTING SETTINGS Printer Used: Bambu Labs X1 Layer Height: 0.2 Infill: 10% - 15% Honeycomb Print Speed: Slow Speed on First Layers Material: PLA Wall Count: 2 Walls

3D Printable Mini Trash Can for Car and Office Use

9percent

Can be used for more than just avocados of course."Chair" needs support.=======================Hanger has been updated to version 2.The components have been divided to improve stability during printing.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/431972/2023-12-17_74ea36305e1c6.jpg"> ======================= 2023/12/30 “hanger” parts of Version2__.3mf file has been changed. (size of the parts changed from 100% to 120%) I found a my mistake in the 3mf. The size of the "hanger" part was small and the "chair" part will touch the ground.

Hanging chair for avocado

Kitchen

The Philosopher

Picture this: you&#39;re home by yourself, sitting on your porcelain throne, and you are ready to depart from your bathroom when you instinctively reach to the side. You reach for it again, but to your dismay, nothing is there, and you slowly look over. Could it be? Could you really have ran out of toilet paper? Now what??? Teepee ensures that this will never happen again. with a modular stacking system, the only limit to how many rolls you can store is your ceiling height. You can use teepee in two configurations, with a receptacle at the bottom that will hold the roll, or with a dispenser and rods for each roll that allows you to use it as a regular toilet paper holder which can “eject” the roll automatically when it is empty, allowing the next full one to automatically roll into the dispenser.&nbsp;This system should work with 99% of toilet paper rolls, however I have included the f3d file just in case, so the size can be increased. You could also just scale the model up, which should work just as well.&nbsp;&nbsp;Printing &amp; Assembly:&nbsp;Printing requires a very small amount of supports for the bottom of each straight piece, as well as supports for the curved portion if you choose to not split it.&nbsp;As for assembly, any strong glue should suffice, or as an alternative you could spot weld the pieces together. To attach the entire thing to your wall, I would recommend either tape or some sort of adhesive, to prevent making a hole in your wall.&nbsp;I have also included a test print, as this entire project is filament intensive, it is a good idea to make sure that each piece will fit together properly before printing the whole thing.  Notes:&nbsp;The dispenser with the ejection system is still quite hairy, and depends on the toilet paper roll. I am working on a more consistent version, but for now I would suggest printing both the receptacle and the dispenser to see which one works better for you. As always, feel free to modify the model as you need, I can provide any other files.&nbsp;To use the ejection system, you must print a rod for each roll you wish to use at any given time, and slide them into the holder. This ensures that each new roll is able to spin freely in the dispenser.&nbsp;Want More? Check out my modular dispensers! https://makerworld.com/en/models/412523

Teepee: Modular Bathroom Crisis Prevention System

Studio

Slowpoke's Workshop

made this beautiful butterfly holder for the contest on maker World

Butterfly pen holder

Kristin

Valeria Momo

Print in place articulated (5 joints) bunny, very satisfying as a fidget toy. I printed it in PLA scaled to 100% and 75% and it performs very well and it's strong. Have fun!ANIMATED GIF<figure class="image image_resized" style="width:31.99%;"><img src="https://makerworld.bblmw.com/makerworld/draft/722489/2024-03-17_57ec01647b11c.gif"></figure>I also tried to paint the object!<figure class="image image_resized" style="width:29.86%;"><img src="https://makerworld.bblmw.com/makerworld/draft/722489/2024-03-17_989277572b439.jpeg"></figure><h3>Check the "<a target="_blank" href="https://makerworld.com/en/models/378459#profileId-278424" rel="nofollow noopener">Extremely Fidgeting</a>" version! (11 joints)</h3><figure class="image image_resized" style="width:29.96%;"><img src="https://makerworld.bblmw.com/makerworld/draft/722489/2024-03-17_f71f9c894ccf5.jpg"></figure><h3>Commercial license</h3>Do you want to sell prints of this model? You can purchase commercial licensing for this model<a target="_blank" href="https://patreon.com/ValeriaMomo?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=creatorshare_creator&utm_content=join_link" rel="nofollow noopener"> by joining the Commercial License in my Patreon</a>.