gopogotom

Create with Jake

Jeep Duck Hitch Cover

Car stuff

SmokieMcagee

Tree supports, 6 walls, and 15% infill. Easy click to paint

Detroit Lions Football Helmet

Sports

JabHook

Detroit Red Wings NHL hockey custom logo coaster

Detroit Red Wings NHL hockey custom logo coaster

Billrobland

Detroit Lions Oversized Logo to use with my chain.

Detroit Lions Oversized Logo Chain

Just Fun

Jendapce

Graduation Cake Topper 2024 Cap Grad Hat&nbsp;Celebrate graduation with these original cake topper designs.

Graduation Cake Topper 2024

Graduation

Models

primewelder

Brick Man Paper Towel Holder

Home

StarBuck

Store your Bambu Lab Scraper and AMS disconnect tool on your Multiboard with one print &nbsp;Print with whatever setting you like but the basic 2 walls and 15% infill is all that is needed.

Bambu Labs scraper and AMS tool holder for Multiboard 

Multiboard

Neebick

Update: I have added a <a target="_blank" href="https://makerworld.com/en/models/146363#profileId-159384" rel="nofollow noopener">scabbard</a> that is designed for this Master Sword.&nbsp;This one was a fun project to see if I could make a master sword that would could be all encompassing for its appearances in Tears of the Kingdom. The party trick being that the center jewel acts as a locking peg for which ever blade is inserted. It's modeled with a tight tolerance so that it will friction fit in. Just press the center of the jewel and the peg will slide out. This allows the blade to be removed. My idea was that this would be more convenient then printing and finishing 3 different hilts for each blade. Storage should be easier as well. Plus its just cool.&nbsp;Glue and supports will be necessary for some parts.&nbsp;I have kept tolerances tight on some parts to help with friction fitting. I've found the blades need a couple insertions before it becomes easier. I figured this was better then a wobbly blade.&nbsp;<h3>Parts</h3><ul><li>Blades - Each blade is designed to be printed upright on the plate. You will need 2 center portions to make a full length blade. I have included pegs which should be glued to join all the sections. I suggest thick walls. I print with 5 walls for good measure. Really helps with flex. Use supports for the peg holes. On the restored blade, I did not include a tip since it is the same as the original blade.</li><li>Cross guard - I have sliced this 2 ways: Sideways for more vertical printing. Excellent cooling is a must. I had very slight sagging towards the top of mine due to the sharp angles of the tips. Or sliced in half for a wider print but easier details if bed adhesion and warping isn't an issue. Supports are a must for both. Focus on the interior portions and tips.</li><li>Grip - Simple part. Print with flared portion on the plate. Make sure to glue it with the cutout portion facing forward. Important for the wrap to be aligned with the cross guard.</li><li>Wrap - This is was a trickier part for me since it kept coming loose from the bed. It doesn't have a very wide base so bed adhesion is critical. Supports and brims help. Has a built in peg to lock it into the proper orientation.</li><li>Jewels and Blade surrounds - Super easy print. Glue peg into jewel with inset on the back. Glue surrounds on cross guard.</li><li>Pommel - Two parts for nicer printing. Use grip to help align while gluing halves together. Can remain removable with future upgrades...</li></ul>&nbsp;<h3>Video Demonstration</h3><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=AtKNojgwpLE"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/AtKNojgwpLE" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Master Sword with interchangeable blades from Legend of Zelda Tears of the Kingdom 

Weapons

LD3d_lab

Skull

Anatomy

Zikmund.petr

EN:Battery holder for Ryobi ONE+ tools. The model was designed with an emphasis on simple and fast printing - the printing time does not take more than 3 hours. For fix use 2 wood screw with diameter 3.5 - 4 mm Printing without supports, 49grams of filaments.&nbsp;CZ:Držák baterie nářadí Ryobi ONE+. Model byl navržen s důrazem na jednoduchý a rychlý tisk - doba tisku nezabere více než 3hod. Pro montáž použijte 2x vrut do dřeva průměr 3,5 - 4mm. Tisk bez supportů, 49gramů filamentu.

Ryobi One + battery holder

Tools

toolmantim313

Simple rack to hold up to 10 build plates. Screws together with 3mmx14mm socket head cap screws. I included both 3mf and stl files with a multi color stand 3mf file, but it's not really necessary as it stands on it's own. Although since the stand does bolt onto the rack, you can use it to mount to the underside of a bench or shelf in the vertical position. I opted to use 3m tape and attached it to the side of the X1.&nbsp;And check out my Hex system adapter mounts so you can mount the rack to a hex wall!&nbsp;https://makerworld.com/en/models/28603#profileId-24991

10 pc Build Plate Rack - Bambu X1/P1

Bambu

m.cody.sims

Just a good Mando helmet!&nbsp;My profile doesn&#39;t have support on the inside of the helmet because I have found it didn&#39;t really help that much with the quality and it used a lot of filament. the very center of the inside will be rough because of this but it hasn&#39;t been an issue for me.&nbsp;For those wondering what I use for a face sheild I use a Hobart 770580 Face Shield Replacement Lens, Shaded from Amazon. I cut it to shape and use a little bit of hot glue along the front and near the temples. That seems to be enough. I would recommend getting air soft helmet padding for a custom fit and comfort.&nbsp;If you like my work, please consider supporting me by boosting my model or <a target="_blank" href="https://www.buymeacoffee.com/m.cody.sims" rel="nofollow noopener">buying me a coffee</a>!

Mandalorian Helmet One Piece

Costumes