goofoo2

hoofty

Just uploaded the updated version with slightly thicker ribs, rounded corners, and easier fit in the center hole. &nbsp;I designed these rings to fit the cardboard spools for Printbed filament. I got tired of the cardboard dust and wobble that you get from spools with dented edges. The ring snaps into the center of the spool and has 3 teeth that dig in and prevent it from slipping. I have tested it on 8 spools so far without issue. No more errors because the spool slipped and couldn't retract.Printed in Printbed black PLA on textured PEI plate. Original model was drawn in Fusion 360

Printbed filament spool adapter ring

Printbed

KlausKolbe007

Wera Lightbar LED

Wera

Terminatordeux

Made it because i am the biggest fan in the world. The event horizon is printed in seethrough pla, the jumper, the gate and the base in grey,you can just insert a led band inside the gap i made in the back of the evnt horizon.Please excuse the photo, i runed out of grey filament so the jumper have a marble grey nose.I'll repost a photo when i'll remake it.

Puddle Jumper through the stargate

Stargate

Logan Pfeifer

UPDATE: Added Version 2 with updated supports and fillets for improved structural stability.This simple wall mount will showcase your drone on any wall of your choosing. I've done several iterations of this design and this one seems to fit the odd angle and curves of the drone the best. <h3>Printing Instructions</h3>Printing with 0.15mm and 0.1 mm layer height seemed to give the best look. I've attached the .3mf file with modifiers for ironing on the flat section and supports on the curved section. I highly recommend using that file when printing. This print was completed on the MMU2S (multiple color support) but could easily be used on a printer that only has one color. I've attached both the individual STLs for multicolor and the single STL for single color.

DJI Drone Wall Mount

chiz_m

If you like to show appreciation for the effort that went into creating this model, pls hit that BOOST button!&nbsp;This a Batman figure modeled after Batman: The Animated Series with styling by Bruce Timm.&nbsp;Watching Batman: The Animated Series (BTAS) and Justice League Unlimited animated shows, back in the day, I was introduced to Bruce Timm&#39;s minimalist, angular outlines and I loved his designs ever since. I thought that with this simplified contours, I don&#39;t need to know anatomy and would be able to draw/sculpt his characters. I collected reference materials and studied this particular style in hopes that one day I will be able to draw characters in this style.&nbsp;Life happened and 30 years after, with the tools available today, I finally had the time and courage to learn digital sculpting. It was a dream come true being able to sculpt and 3D print Bruce Timm&#39;s version of Batman.&nbsp;Throughout the sculpting process, I made sure the overall minimalist styling, angular contours and the face sculpt are accurate to the animated version but reduced some of the exaggerated proportions to improve it further. Hope you like it!<h3>IMPORTANT</h3>Please adhere to the license I set for this model. This model is NOT FOR COMMERCIAL USE. I have not given anyone permission to sell both digital or physical copies of this model.<h3>PRINTING &amp; ASSEMBLY INSTRUCTIONS</h3><ol><li>Select between the available scales:<ol><li>1/12 (6in. tall, minus the base) - ideal if you want a bigger model for display and do not have a 0.2mm nozzle</li><li>1/18 (4in. tall, minus the base) - choose this scale if you want a smaller figure that could fit a small desk or display case (requires 0.2mm nozzle). <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139876/design/2024-01-15_df179fb2a4986.png"></li></ol></li><li>Print the parts as oriented in the profiles. Supports are required on some areas of the model. The profiles have all the supports set already. The eyes go in as one piece. They go into the eye sockets from the inside but not all the way through. Use a tweezer to get the eyes in. </li><li>Use glue/adhesive to attach the parts. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139876/design/2024-01-15_23c8734f34f18.jpg"> </li><li>BE CAREFUL removing the supports from the cowl as area especially the mask is thin and could detach along with the supports.</li></ol><h3>FILAMENTS USED</h3><ul><li>cowl, cape, boots: Polymaker Polyterra Charcoal Black</li><li>belt: Savannah Yellow</li><li>body: Matter Hackers Build PLA Silver</li><li>eyes: Inland PLA White</li><li>face: Inland PLA Pastel Pink</li></ul>

Batman Animated / Justice League Unlimited Figure

Batman

Ocular Dynamic

This is a fun and super simple print of a fidget style toy heart bumped up to versions of  9 or 12 hearts. Scaling shouldn't be too much of an issue to enlarge a little, but there isn't as much give for scaling down for obvious reason.

Fidget Heart

Valentine

Stefan_schmid91

Skadis Spool Holder with Wood 23mmPlatte 1 - right Platte 2 - leftPlatte 3 - 10x chop

Skadis - Filament Spool Holder - Wood 23mm

Skadis

DennisV

This is a 3 Color Silvester Stand for your shelf, desk or wathever :)The Foot is for clip in the 2 of 2024. One is enough :)&nbsp;Have Fun :)

Silvester Dwarf New Year 2024

New Years

waveman

*** Check out the <a target="_blank" href="https://makerworld.com/en/models/505390" rel="nofollow noopener">Customizable Textured</a> version of this model! ***&nbsp;Infinity cube with strong hinges that won&#39;t break easily. This cube is designed with a lot of slack, so that it moves freely.&nbsp;I designed this after having several fails with other models, where the hinges would break when trying to loosen them after printing. Hopefully, this design will print well for everyone!&nbsp;These models and openscad source file can also be downloaded from <a target="_blank" href="https://github.com/jhpieper/sturdy-infinity-cube" rel="nofollow noopener">https://github.com/jhpieper/sturdy-infinity-cube</a><h3>Post-Printing</h3>The hinges should bent quite easily after printing, with the hinges on the front and back side being more tight due to the orientation. Just work the cube a few times and everything should be quite loose.<h3>Cube Sizes</h3>It is best to not scale the model, as it messes with the spacing in the hinges.Instead, check out these other models optimized for their size:<ul><li><a target="_blank" href="https://makerworld.com/en/models/36109#profileId-33936" rel="nofollow noopener">16: S</a></li><li>20: M -- try this first! This is the most common size.</li><li><a target="_blank" href="https://makerworld.com/en/models/36113#profileId-33940" rel="nofollow noopener">24: L</a></li><li><a target="_blank" href="https://makerworld.com/en/models/36115#profileId-33943" rel="nofollow noopener">30: XL</a></li><li><a target="_blank" href="https://makerworld.com/en/models/36116#profileId-33945" rel="nofollow noopener">36: XXL</a></li></ul><h3>Other Versions</h3><a target="_blank" href="https://makerworld.com/en/models/505390" rel="nofollow noopener">Customizable Textured Infinity Cube</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000021188/design/2024-06-23_8e8ad03b44d33.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/41416#profileId-41687" rel="nofollow noopener">Halloween Sturdy Infinity Cube</a> (two color print with AMS)<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000021188/design/2023-10-15_f2f98325d3a09.jpg">&nbsp;<a target="_blank" href="https://makerworld.com/en/models/31328#profileId-27875" rel="nofollow noopener">Two-faced Sturdy Infinity Cube</a> (two color print with AMS)<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000021188/design/2023-10-15_599e03246b88.png">

Sturdy Infinity Cube

Random

MEAF designs

Easy to print and fun to make!Perfect for your candy table, coffee table or any corner of your house&nbsp;&nbsp;Specially designed to fit in the buildplate of any mid size printer.The base is one piece. and every letter and details are separated files so you can print it in different colors even without an AMS.&nbsp;Designed two styles for every “O”. so you can choose what you like.<ul><li>First "O": choose between santa claus or tree ornament</li><li>Second “O”: choose between snowman face or snowman body</li><li>Third “O”: choose between reindeer or christmas elf</li></ul><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/1795494732/draft/2023-09-02_n84evi4tipld.gif"></figure>&nbsp;split the "Details" file in to parts with your slicer and just print the details you like for each one and glue them on top!<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/1795494732/draft/2023-09-02_o1xtzxx4tz4i.png"></figure>&nbsp;&nbsp;&nbsp;Print SettingsMaterial: PLA / PETGLayer height: 0,28 mm for letters and base. --- 0.2 for detailsNozzle diameter: 0,4mm or 0,6mmInfill: 10 -12%Perimeters: 2Supports: no&nbsp;Printing Tipthe tolerances are a little tight, so you will need some glue depending on your printer and/or filament calibration&nbsp;&nbsp;&nbsp;

Christmas hohoho Sign

Christmas

Williams Industries

This is included in my Patreon below, which will have about 100 files in total for the Halloween themed drop. This is a layered print and this is meant to be printed on a Bambu with AMS or Multicolor printer. Makes for great wall art, or you can scale it down and add a magnet on the back for a magnet. If you would like to sell this, please join my patreon: <a target="_blank" href="https://www.patreon.com/WilliamsIndustries" rel="nofollow noopener">https://www.patreon.com/WilliamsIndustries</a>

Happy Halloween Sign 

Halloween

neil3dprints

Bambu Mate P1S ( AMS Version )&nbsp;Update 23/09/2023&nbsp;I have removed the original 3MF file and split the parts against four profile 3MF's. As this model requires more than four colours, as soon as the fifth colour is reached for printing, this has caused some people issues. Please print the four new profile 3MF's and refer to the images for assembly. Any problems please leave a comment and apologies for any inconvenience.&nbsp;Do you love your 3d printer so much, that you'd wish you could print a miniature caricature of it? Well…. you welcome. :-)Now, I should point out a number of the parts do take advantage of the AMS system. If you do not have a AMS, then, like… why not?And… YOU WILL NOT BE ABLE TO PRINT THIS!!!&nbsp;I printed all the parts at 0.16mm layer height.A number of the parts will require gluing together. Please refer to the images to see what order to attach the parts together.&nbsp;If anyone has any questions or queries, even if you might think it is a stupid question, seriously, just ask me. Send me a DM through MakerWorld and I will get back to you ASAP. I want people to be able to print this. So if anyone is having any problems, just reach out. I'll be happy to help where I can.If you want to stay up to date with anything I am working on and are perhaps interested in other projects I have in development, please check out my instagram or Twitter.<a target="_blank" href="https://www.instagram.com/neil3dprints/?hl=en" rel="nofollow noopener">https://www.instagram.com/neil3dprints/?hl=en</a><a target="_blank" href="https://twitter.com/NHengist" rel="nofollow noopener">https://twitter.com/NHengist</a>&nbsp;Happy printing everyone,

Bambu Mate P1S ( AMS Version )

Bambu

Sevro

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/707210016/draft/2023-08-14_24eoec9ay7zf.gif"></figure>OverviewFlexi model of buddy dog. You can take him wherever you go. Zap it to backpack or other items and he will guard it with your name on it's side.It has two version with smile and not smile. I couldn't decide which is better. Choose as you want :)Adding textYou can simple add text in Babmu Studio. Just click T on keyboard and make your own text.&nbsp;

Flexi Buddy

flexi.factory

This Flexi Panda is an articulated print-in-place model that needs NO supports. The stand is printed in 3 parts and easily snaps together with no need for glue Included are 7 files: -Panda -Bamboo stick (for panda to hold) -Stand Platform -Stand Base -Stand ladder -Painted Bambu AMS Panda -Painted Bambu AMS Stand Also Optimized for AMS, meaning if you are using a Bambu Printer with multiple colors, you should easily be able to use the fill tool for coloring. I have added a 3mf as well for convenience! Like with all my Flexi's, I went through many iterations to make sure it was strong, and easy to print without supports. ALL Flexi Factory designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent.To legally sell PRINTED models, you may obtain my permission through this link:<a target="_blank" href="https://www.patreon.com/FlexiFactory" rel="nofollow noopener">https://www.patreon.com/FlexiFactory</a> or www.myminifactory.com/users/FlexiFactoryPlease help support the creative work of each 3D artist and NEVER share or sell a digital file.<h2>3D PRINTING SETTINGS</h2>Easy Print. Can be scaled upNo Supports (adding supports will hinder functionality) Mostly Print-in-place (the stand snaps together) 15% infill I always like to use 3 walls PLA works great