朝天肚脐

WannaRun

盒子和盖板的固定孔位用剪刀剪8mm的1.75 耗材丝插入即可。There is no need to support the rotating storage box, and the hole between the upper lid and the box can be inserted with a 8mm 1.75 filament.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000491756/design/2024-06-11_f3c57dd68123c.jpg">

Storage box 旋转收纳盒 

日用品

Meshminds

Do NOT sell this design online (Etsy, Ebay, website…)Do NOT share/upload the files anywhere else-Want to make money 3d printing? Join my free group: <a target="_blank" href="https://www.skool.com/help-me-3d-printing-8252/about" rel="nofollow noopener">https://www.skool.com/help-me-3d-printing-8252/about</a>-Want to a commercial license to sell all of my products?Join my paid group: <a target="_blank" href="https://www.skool.com/make-money-3d-printing-1698/about" rel="nofollow noopener">https://www.skool.com/make-money-3d-printing-1698/about</a>

Gun charm for crocs

crosc

RemcoGoy

Inspired by the captivating ripples of a water droplet&#39;s impact, this 3D-printable catch-all tray brings a moment of tranquility to your space. A beautiful and functional way to organize your small treasures.

Water Drop Tray

艺术

SillySnax

<h3>A variety of Silly Streets for matchbox and hotwheels cars. </h3><h4>Compatible with hotwheels track and connectors.</h4><h4>Single Lane Version, A Dual Lane Version is also available on my profile.</h4>My son has been collecting hotwheels sets and needed a way to connect them to each other. The hotwheels city roads are not available in Australia so I wanted to print something similar to the matchbox roads I had as a child. I started out with a few basic single lane pieces, but that quickly escalated!&nbsp;I plan to continue adding to the collection of pieces.

Silly Streets - Hotwheels Track Pack - Single Lane

1：64

Lockwick

A simple cat toy, designed to print cleanly and you can put anything inside it :)

Cat Toy Ball with Paws

宠物

Plumbum

A buckle for 5cm or 2&#34; wide nylon webbing straps. Easy adjustable but with a firm grip on the straps. It is made so it can easily rotate to a certain degree.No supports needed.

Belt buckle snap lock 5cm 2"in strap short clasp

模拟五金配件

Eggy00

This is little organizer handling 2 different rolls of solder, 2 different chem-wik and 2 different jumper wire rolls. Compact version with extra pockets.

Electronics solder accessoires organisator

打印机配件

NxtGnPrtHub

English: We all have a 3DBenchy somewhere. But do you also have a flag for your benchy? No? Then it is not perfect.You can print the appropriate flag here. But be careful, it's not as trivial to print as it seems at first glance. The printing time is 8 minutes, no support is required. Your printer should already be properly calibrated so that it prints the flag cleanly. <img src="https://makerworld.bblmw.com/makerworld/draft/779838/2024-03-28_be4099f3a7d98.jpg"> Deutsch: Jeder on uns hat irgendwo ein 3DBenchy stehen. Aber haben Sie auch eine Fahne für ihr Benchy? Nein? Dann ist es nicht vollkommen. Hier können Sie die passende Fahne drucken. Aber passen Sie auf, es ist nicht so trivial zu drucken wie es auf den ersten Blick aussieht.Die Druckzeit beträgt 8 Minuten, es ist kein Support nötig.Ihr Drucker sollte schon sauber kalibriert sein damit dieser die Fahne sauber druckt.&nbsp;

3DBenchy Flag

模型

Quirkys3dprinting

cute little bee croc charm!&nbsp;These charms have pins on the back design for crocs that have 6mm holes in them if this doesn&#39;t fit your kids crocs you can cut the pin off in the slicer and download a croc jibbet - croc pin and glue it onto the croc charm.  You can also cut this pin off and print it separately and resize it and glue it as well.

Bee croc charm (kids crocs)

洞洞鞋配件

Joshua3D

Checkout my other keycap models here - <a target="_blank" href="https://makerworld.com/en/u/1173640213/collections/162965" rel="nofollow noopener">https://makerworld.com/en/u/1173640213/collections/162965</a>&nbsp;Adapted from my other model - <a target="_blank" href="https://makerworld.com/en/models/102342" rel="nofollow noopener">https://makerworld.com/en/models/102342</a>

Toy Block Keycap for Mechanical Keyboard

解压

Tshine

三无改造小米米家蓝牙温湿计2使用外置7号电池。无损，无支撑，无焊接。Using external AAA batteries for <a target="_blank" href="https://www.mi.com/pk/product/mi-temperature-and-humidity-monitor-2/" rel="nofollow noopener">Mi Temperature And Humidity Monitor 2</a>&nbsp;如果你需要 5 号电池版本请前往 <a target="_blank" href="https://makerworld.com/zh/models/376261#profileId-276224" rel="nofollow noopener">5号电池小米温湿度计2</a> 。If you need aa battery version，go <a target="_blank" href="https://makerworld.com/zh/models/376261#profileId-276224" rel="nofollow noopener">Xiaomi thermometer 2 with AA battery </a> 。<h2>准备 You will need</h2>1 . 两节7号电池盒（长52mm宽24mm高13mm），建议长度不超过52mm，高度不超过13mm。（如果你动手能力强的话也可以自己打印模型做）battery compartment that can hold two AAA batteries (52mm * 24mm * 13mm)&nbsp;2 . 打印 <a target="_blank" href="https://makerworld.com/zh/models/374191#profileId-274112" rel="nofollow noopener">Dummy CR2032 Battery</a> 确保可以正确组装到温湿度计上。Print the <a target="_blank" href="https://makerworld.com/zh/models/374191#profileId-274112" rel="nofollow noopener">Dummy CR2032 Battery</a> to ensure that it can be assembled correctly onto the thermometer.&nbsp;这是我使用的电池盒，供参考Here is what I used.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/765905/2024-03-16_9e5d6469def58.jpg"></figure><h2>打印说明</h2>1. 请务必先打印 <a target="_blank" href="https://makerworld.com/zh/models/374191#profileId-274112" rel="nofollow noopener">Dummy CR2032 Battery</a> 并将电池和温度计正确连接。由于可能会分开修改或优化，所以这里未提供CR2032 的打印配置。2. 在打印配置中，有两个版本，一个是1.6mm边框厚度的普通版本，看起来会更圆润一点，另一个是 0.8mm 边框厚度的 mini 版本。对比图如下：除了主体和后盖，其他部件都是可以通用的。<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/765905/2024-03-22_35ca1d28a1055.png"></figure><h2>安装指南 Instructions</h2>连接好 Dummy CR2032 Battery 后，基本没什么难度了&nbsp;1 . 先将温度计放入并卡好位置，注意温度计前面板有0.1毫米的边框用来遮挡边框和温度计之间的缝隙，不要破坏了。2 . 安装电视面板连接件。3 . 安装前面板装饰件。4 . 再从后面将电池盒放入。5 . 盖上后盖。6. （可选）将支架支架插入后盖。<h2>其他</h2>安装温度计时，可以在最后一点的时候倒扣到桌子上按压下去就可以对齐边框了。<h2>更新</h2>2024.3.221. 前面板温度计窗口增加0.1mm的边框，可以有效遮盖温度计和边框之间的空隙。

Xiaomi thermometer 2 with aaa battery| 7号电池小米温湿度计2

小米

RJ Design

The Design&nbsp;Here we here a Vortex made from Suspended filament. This looks great and shows off the capabilities of your Printer.&nbsp;After a couple of people have had bed adhesion issues, I&#39;ve added an updated Version with a thicker rim, which can be found here: &nbsp;<a target="_blank" href="https://makerworld.com/en/models/475325#profileId-386079" rel="nofollow noopener">https://makerworld.com/en/models/475325#profileId-386079</a>&nbsp;This version should work great! but if you experience any issue the Thicker Rim version should help&nbsp;The cylinder is approximately 100mm in diameter&nbsp;&nbsp;Printing&nbsp;Slice with the Arachne wall generator. ensure layer thickness is at 0.2mm &nbsp;Once printed let the build plate cool. The base is fragile - take extra care when remove from the build bed.&nbsp;Occasionally a filmament line may fail. I recommend careful plucking it out - it won&#39;t affect the overall look. &nbsp;&nbsp;&nbsp;My WorkAfter many years in Engineering, I&#39;ve just decided to try and follow my childhood dream of becoming of a Creative Designer.A Creative Designer of what? No idea! Right now I really like puzzles, mechanisms and kinetic sculptures so that&#39;s where I&#39;m going to focus my efforts.

Suspended Filament Vortex -Original

摆件

kurikoo

经常用咖啡豆自己制作咖啡的朋友，可能都会遇到一袋豆子喝到最后只剩了几克，不够做一次咖啡但是扔掉又觉得可惜。于是我就设计了这个咖啡杯造型的车载香薰，将剩余的咖啡豆装在里面，插在汽车的空调出风口上或挂在后视镜上，可以在开车时闻到咖啡的香气。&nbsp;安装方法：1.插在空调出风口上：打印咖啡杯、杯盖以及出风口夹（有三种大小可选），使用1颗M3螺丝（长度为 6~10mm）将咖啡杯和出风口夹组装在一起，最后将出风口夹插在空调出风口上即可。2.挂在后视镜上：只需要打印咖啡杯和杯盖，用一根绳子穿进挂绳孔（螺丝孔），打个结然后挂在后视镜上即可。&nbsp;如果觉得完整的咖啡豆香气不明显，可以打印模型文件中的研磨过筛器将咖啡豆稍微研磨一下，如果家中有粉锤可以只打印研磨过筛网来研磨，轻轻研磨几下之后筛掉细小的碎渣，将剩下的咖啡豆装入咖啡杯中即可。<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/846933/2024-04-12_2c86c811ab6f9.png"></figure>

咖啡杯车载香薰 丨 Coffee Cup Car Aromatherapy

车载用品

TheBasedDoge

4 Post Storage Lift for 1:36 Model Cars / RC Cars.

4 Post Storage Lift for 1:36 Model Cars / RC Cars

车模

WF3Dprinting

Print all pieces, assembly - Done ;D

Naruto Kunai

玩具

Love Prints

TransformersAutobot - LightboxFanart inspiredProvided in Black and White but easily recolourable We Recommend - UK COB LED strip: <a target="_blank" href="https://www.amazon.co.uk/dp/B09D7DH376?psc=1&ref=ppx_yo2ov_dt_b_product_details&_encoding=UTF8&tag=cariadprints-21&linkCode=ur2&linkId=e5f6db63799950a7b1ab1f32b3fa20c3&camp=1634&creative=6738" rel="nofollow noopener">COB LED's</a> Additional Files included:White Diffuser Hanging Rear Plate with CutoutRear PlateRear Plate with Cutout3.6mm Inserts Print Face Down on a Textured PEI Plate for best results<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/123505/2023-10-26_49c457cb7fe49.png"></figure>

Autobot Logo - Lightbox

变形金刚

KenPrint3D

This is logo sign kit card model for the events at the comicon in Montreal. I am also sharing the model on makerworld only. thank youLike And follow me for more :D https://makerworld.com/en/u/3490465018

Bathroom Sign Kit Card edition

贴牌

nicodeimos

Ring hole: 4.8mm.Model size: 23mm x 40mm x 3.2mm.Filaments: Bambu Lab Matte PLA (only 1 AMS needed).&nbsp;Please do not sell, copy, remix or distribute this model.<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=G5FK3QJJUSW8N" rel="nofollow noopener">Enjoying my models? Make a donation!</a><a target="_blank" href="https://makerworld.com/en/u/2495159158" rel="nofollow noopener">Want to sell my models? More info on my profile!</a>&nbsp;Likes, comments and prints help to support me and will be very much appreciated!Feel free to <a target="_blank" href="https://makerworld.com/en/u/2495159158" rel="nofollow noopener">contact me</a> for any information.&nbsp;This 3D model is a unique custom-made version inspired by the work of Nintendo and any brand/studio/production/trademark associated with it. I do not take credit for the original drawing.

Mario bullet keychain

钥匙扣

Mythmarco

I&#39;m thrilled to present my latest 3D printing project: a custom Deadpool Dummy 13 model! This unique remix combines the creative work of several talented designers, featuring a Dummy 13 base, Deadpool’s iconic weapons, and his signature mask. Here’s a detailed look at how I printed this model and the profile settings I used.&nbsp;Model Details:<ul><li>Base Model: Dummy 13 (Original Creator) <a target="_blank" href="https://makerworld.com/en/models/183780?from=search#profileId-202639" rel="nofollow noopener">https://makerworld.com/en/models/183780?from=search#profileId-202639</a></li><li>Head: Custom design (@Kaleb08) <a target="_blank" href="https://makerworld.com/en/models/187814?from=search#profileId-206932" rel="nofollow noopener">https://makerworld.com/en/models/187814?from=search#profileId-206932</a></li><li>Swords and Holster: Custom design (@Kaleb08) <a target="_blank" href="https://makerworld.com/en/models/67788?from=search#profileId-150040" rel="nofollow noopener">https://makerworld.com/en/models/67788?from=search#profileId-150040</a></li><li>Guns and Holster: Custom Design (Mici) <a target="_blank" href="https://makerworld.com/en/models/174737?from=search#profileId-350647" rel="nofollow noopener">https://makerworld.com/en/models/174737?from=search#profileId-350647</a></li></ul>Printing Process: For this project, I used my Bambu Lab X1C printer due to its larger volume, which allowed me to print Deadpool’s weapons and mask with great detail. Here’s the printing profile and settings I used:&nbsp;<ul><li>Printer: Bambu Lab X1C</li><li>Filament: PLA (Color: Red, Black and White for eyes)</li></ul>The profile has 5 plates,<ol><li>Print each plate with or without supports according to the plate title.</li><li>Plate with the calves and mask ensure you use brim and tree supports and carefully remove these from the calves, the calves are a challenge but can be done carefully.</li><li>Follow Original Dummy 13 video for guidance on assembly.</li></ol><figure class="media"></figure>Additional Notes:<ul><li>Post-Processing: After printing, I carefully removed the supports.</li></ul>This Wolverine Dummy 13 model was a labor of love, combining the creative efforts of multiple designers and the precise capabilities of my Bambu Lab printer. I’m thrilled with how it turned out and I hope you enjoy it as much as I enjoyed creating it!Feel free to download the STL files and use my printing profile to create your own Wolverine Dummy 13 model. Happy printing!&nbsp;Check out my Wolverine version here: <a target="_blank" href="https://makerworld.com/en/models/467865?from=search#profileId-376985" rel="nofollow noopener">https://makerworld.com/en/models/467865?from=search#profileId-376985</a>&nbsp;&nbsp;

Deadpool Dummy 13 Model - 3D Innovators Studio

机器人

NUKDDD

Legend says that some chickens and bunnies had babies and that's where these adorable little hole-y eggs came from. People would go hunt for these eggs every spring, thus came the holiday called Easter…I made that up, it's actual about a bunny waking up after a long nap and losing the race to the tortoise and became an egg.&nbsp;Please give a 👍 if you like it, even if you don’t download it, it’ll help others discover it 😊Commercial rights available for all my designs at <a target="_blank" href="https://www.patreon.com/NUKDDD" rel="nofollow noopener">https://www.patreon.com/NUKDDD</a>&nbsp;These eggs will look great day and night by themselves or next to other decors.&nbsp;<a target="_blank" href="https://shrsl.com/4gf88" rel="nofollow noopener">Designed to fit Bambu Lab's Lamp Kit, available in the online shop.</a>&nbsp;Printed with Bambu's <a target="_blank" href="https://shrsl.com/4gfvl" rel="nofollow noopener">Basic</a> and <a target="_blank" href="https://shrsl.com/4gfae" rel="nofollow noopener">Matte PLA</a>&nbsp;No support, easy assembly, big one compatible with Bambu Lamp Kit 001 and small one for tea lights up to 40mm in diameter. Standard setting, except for the bases, they all have fuzzy skin turned on, default setting. You can support me by using my affiliate link to purchase <a target="_blank" href="https://amzn.to/3PxD8HO" rel="nofollow noopener">the LED candle</a> I purchased in my video and photos. I may earn a small commission.&nbsp;All you need is to bring your own light, nothing else is needed, like most of my designs. Check them out in my profile!&nbsp;Disclaimer: This model is part of the Creator Program, When you purchase the Lamp Kit 001 or filament through the links provided, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)

日用品