轮回

rky.91

If you like the model or add it to a collection, please consider give it a Boost and hitting download to increase its visibility :)Thank you!&nbsp;Models available:<ul><li>3 slot bambulab plate holder for X1C, X1E, P1S, P1P, A1</li><li>5 slot bambulab plate holder for X1C, X1E, P1S, P1P, A1 - the original one</li><li>7 slot bambulab plate holder for X1C, X1E, P1S, P1P, A1</li></ul>The plate holder comes out really solid and stable. No problem at all printing it in PLA on textured PEI plate.&nbsp;&nbsp;Here are some of your prints&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000081006/design/2023-12-29_e72a02deb4f69.png"> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000081006/design/2023-12-29_cfd1cbcbb1ec6.webp"> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000081006/design/2023-12-29_ac8cdbf333ed5.webp">

Bambulab Plate Holder x3 x5 x7 slots

FlorinV

Please share your make and let me know your opinion about this model. Thank you and have a great week !&nbsp;Update 11.03.2024: Added “Skull" lid. There is an optional profile for printing this lid. <a target="_blank" href="https://makerworld.com/en/@timon1201" rel="nofollow noopener">@timon1201</a> did a similar lid and gave me this idea. thanks !&nbsp;Update 29.12.2023: Added “Pine cone” lid. You can find it in the Optional Lids profile. The lid has fine details, please be sure your printing plate is clean (no finger grease etc.).&nbsp;The Automatic Toothpick dispenser:<ul><li>All parts are 3d printed, all in one plate. No AMS needed.</li><li>Several Lids to choose from and a clean lid to customize it as you wish. “Voronoi” and “Yoda” lid are found in the model profile. Other optional lids will be added to the “Optional Lids” profile.</li><li>Each part easily fit together. Please check the short building video bellow. ( 1min 30sec minutes to build )</li><li>works with toothpicks of max 66mm and approx. 2mm diameter (normal toothpicks I've found ). Please shake the dispenser to arrange the toothpicks correctly and parallel. Throw away toothpicks that look too different than normal ones: damaged, askew.</li><li>The two arms that hold the big parts together have printed on them L and R, to be sure you set them correctly (left and right).</li><li>The 3d printed spring should be inserted like in the video, first on the back with the other end up, then the front.</li></ul><figure class="image image_resized" style="width:30.4%;"><img src="https://makerworld.bblmw.com/makerworld/draft/682841/2023-12-14_9977d673e0c9a.png"></figure><ul><li>Second spring is optional (the left one). After some use, it will work smoother, as the parts needs some time to slide easier one on each other. From my experience, the right spring is enough, but feel free to play around.</li><li>If some of the toothpicks are thrown, it means some of them are a bit too thin. You can dispense them better by releasing the push pad slower. :)</li><li>If at some moment it stops from giving toothpicks, it can happen that the feeding zone is blocked by two toothpicks (usually because some toothpicks are smaller/bigger, damaged, askew etc). It's easily fixed by shaking a bit the whole model and/or press harder on the push part.</li><li>The parts are finely designed to work together, so I suppose it's important to have a good filament and calibrated. Please use my tested profile.</li><li>You can choose from two different lids (in the main profile, more lids in a separate profile - Optional Lids). The “Yoda” lid is a separate plate as it's using AMS and 2 colors.  You can print it without AMS and leave empty space in the lid where letters and Yoda is (don't print the letters and Yoda).</li><li>I've added another profile (For Thinner Toothpick - only base part) containing only the base part for cases where your toothpicks are often flying out of the dispenser. This is usually a problem related too thin toothpicks. This part is only the base part which should handle such toothpicks.</li><li>Based on the review of eric.joschko (thank you!!), he scaled everything to 108% and everything works perfect for he's toothpicks which i understood they are 68mm length.</li><li>Based on review of Sven_fretz (thank you!!): “scaled everything up to 125% and it works fine with my 80mm toothpicks.”</li><li>For better spring action and to be sure they keep their power better in time, you can print only the springs with PETG.</li></ul>This is the building video (1min 30sec minutes ): <a target="_blank" href="https://youtu.be/BJucPYljE2o" rel="nofollow noopener">https://youtu.be/BJucPYljE2o</a><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=BJucPYljE2o"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/BJucPYljE2o" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;If you like this model, please check out my new Salt & Pepper dispensers: <a target="_blank" href="https://makerworld.com/en/models/228050#profileId-245632" rel="nofollow noopener">https://makerworld.com/en/models/228050#profileId-245632</a><figure class="image image_resized" style="width:56.68%;"><img src="https://makerworld.bblmw.com/makerworld/draft/682841/2024-03-06_0e2805d6f36fc.jpg"></figure>&nbsp;Or, my fun and easy to print, easy to use filament cutter: <a target="_blank" href="https://makerworld.com/en/models/137257#profileId-149353" rel="nofollow noopener">https://makerworld.com/en/models/137257#profileId-149353</a><figure class="image"><a href="https://makerworld.com/en/models/137257#profileId-149353" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/682841/2024-01-15_0a30aa152023c.png"></a></figure>&nbsp;Disclaimer: YOU ACKNOWLEDGE, BY YOUR USE OF MY MODELS, THAT YOUR USE OF THE MODELS IS AT YOUR SOLE RISK.<h2>LIMITATION OF LIABILITY</h2>UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL OR EQUITABLE THEORY, SHALL THE DESIGNER OF THE MODELS BE LIABLE TO YOU OR TO ANY OTHER PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL LOSSES OR DAMAGES OF ANY NATURE ARISING OUT OF OR IN CONNECTION WITH THE USE OF OR INABILITY TO USE THE MODELS OR 3D PRINTED MODELS.

Toothpick Dispenser - all parts printed

工具

GlennovitS 3D

<figure class="table"><table style="border: 4px solid rgb(77, 230, 77)"><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models, get access to exclusive models, and get commercial rights, to sell prints of my models. <a target="_blank" href="https://www.printables.com/@GlennovitS3D#join" rel="nofollow noopener">Join today - GlennovitS3D</a> - or check out my <a target="_blank" href="https://makerworld.com/en/@GlennovitS3D" rel="nofollow noopener">model collection</a> 🗂️ and my <a target="_blank" href="https://makerworld.com/en/@GlennovitS3D/collections/1401115" rel="nofollow noopener">popular models 🔥</a></td></tr></tbody></table></figure>Updates:<figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000466386/design/2024-06-13_68fab90b938e68.jpeg"></figure>13. June 2024 - New <a target="_blank" href="https://makerworld.com/en/models/494875#profileId-408895" rel="nofollow noopener">Minimals Savanna Pack</a> available! 🦓🦒🦏🐆&nbsp;Animals.. but mini… Minimals! Enjoy this first pack/collection of safari Minimals!<figure class="image image_resized image-style-align-right" style="width: 49.4%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000466386/design/4df051e6-ab54-4703-909d-fe9a831e343e.gif"></figure>Perfect for your desk or somewhere else, where they can sit and maybe bring a smile when you see them.This collection contains 4 animals - but are there more coming?..<h3>Overview</h3>Say hi to your 4 new buddies:<ul><li>Elly Elephant 🐘</li><li>Luke Lion 🦁</li><li>Maddy Monkey 🐵</li><li>Chris Crocodile 🐊</li></ul>All of them comes in multiple versions:<ul><li>Single file (fx. Elephant.stl)<ul><li>Can be printed in single color</li><li>..or split to parts in slicer and printed easily in multicolor with an AMS</li></ul></li><li>Multiple files (different parts, to print in different colors seperatly and glued together afterwards)</li></ul><figure class="table" style="height: 0px; width: 0px"><table style="border: 4px solid rgb(153, 230, 77)"><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">More Minimals or other fun models? I got you covered! Check out this <a target="_blank" href="https://makerworld.com/en/@GlennovitS3D/collections/1289189" rel="nofollow noopener">Minimals collection</a> - or this <a target="_blank" href="https://makerworld.com/en/@GlennovitS3D/collections/97409" rel="nofollow noopener">collection of fun models</a> - everything from toys, to puzzles and games.</td></tr></tbody></table></figure><h3>Assembly</h3><figure class="image image_resized image-style-align-right" style="width: 50.04%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000466386/design/202ca7b5-5c65-48e3-93b6-189be1b15386.webp"></figure>If you print the pieces seperatly (maybe to have multiple colors without an AMS), you need to glue things together. This requires a steady hand - they are small, and the pieces is really small. Now you are warned<h3>Multicolor prints</h3>This is optional - but looks nice! You can do like this (in Bambu Studio):<ol><li>Insert the single-file-version you want (fx. Elephant.stl)</li><li>Right click on the model and click on Split &gt; To parts</li><li>In the left pane Process click on Objects</li><li>Select individual parts of the model and choose filament for each.</li></ol><h3>Print instructions</h3>Here is a few ideas to get started:<ul><li>Supports: Yes - overhangs like ears requires supports. I have mine set to Automatic Organic Tree supports with a Threshold angle of 25. Worked just fine</li><li>Colors: paint in slicer</li><li>Orientation: Printing the single-file-versions - just as they come. But if printing the pieces seperatly, you need to rotate them to optimal position (and even lowering some a bit ‘below’ the printbed. This is done for you in the Bambu Studio project files!</li></ul>Happy printing!

Minimals Safari Pack (elephant lion monkey croc)

动物

blecheimer

This is a toy plane that is based on the famous Boeing Stearman Model 75 biplane. <a target="_blank" href="https://en.wikipedia.org/wiki/Boeing-Stearman_Model_75" rel="nofollow noopener">https://en.wikipedia.org/wiki/Boeing-Stearman_Model_75</a> The toy plane has a wingspan of 240mm and a length of 196mm. It can be completely assembled without using glue. All necessary clips and bolts are printed. I even included a small screwdriver.&nbsp;Use the following settings for the wings: 0,12 layer height, 4 walls, 4 bottoms, 8 tops, 16% gyroid infill The rest can be printed with 0,2 layers, 4 walls, 4 bottoms, 5 tops, 6% gyroid infill. I recommend a brim only for the bolts. See my 3mf for more details and how I positioned the parts on the build plates.&nbsp;Print the following parts with support:<ul><li>Fuselage (only for the cockpit)</li><li>Wings (only for th bottom of the threads)</li><li>Engine (not for the thread)</li><li>Bolts (only for the head)</li><li>Struts (use small tree support)</li><li>Supports (use small tree support)</li><li>Cockpit (only for the bottom of the thread)</li></ul>Do not use support on the threads.&nbsp;All parts will fit into a 200x200x200 build space.  A1 mini users need to split the wings into two parts (can be done with Bambu Studio) and glue them together after printing.&nbsp;For assembly follow these steps:<ul><li>put the front cover on the engine</li><li>screw the engine to the fuselage</li><li>insert the cockpit into the fuselage and secure it with a short bolt</li><li>insert the lower wing into the fuselage and secure it with a short bolt</li><li>insert the rear wing into the fuselage and secure it with a short bolt</li><li>this is now a bit tricky: insert the middle supports into the fuselage and put the top wing on the supports</li><li>now put one strut between the lower and top wing</li><li>insert a long bolt through the lower wing into the strut and screw it to the top wing</li><li>repeat for the other side</li><li>clip the propeller and the wheels with the pins to the plane</li><li>make funny engine noises and play with your new plane  </li></ul>Update 2023-12-11:Thanks to sgioja and CatWhisker I was able to correct two design flaws (cockpit + wings) and re-oriented the wing support in the print profile. The STLs and the print profile have been updated accordingly.&nbsp;Update 2024-02-17: User doppelt-05 made a very creative add-on to this model. He added a pinwheel propeller so that the propeller spins when the wind is blowing. You can find his model here on makerworld: <a href="https://makerworld.com/en/models/190364#profileId-210130" rel="nofollow"> https://makerworld.com/en/models/190364#profileId-210130</a>&nbsp;&nbsp;Disclaimer: This work by blecheimer is licensed under <a target="_blank" href="https://creativecommons.org/licenses/by-nc-nd/4.0/" rel="nofollow noopener">CC-BY-NC-ND 4.0</a>. You are not allowed to copy this model to other 3D printing websites without my permission.

Boeing Stearman 75 Toy Plane

玩具

Catherine Doucet

<h3>Filament Purge/Poop Shadow Box</h3>UPDATE 1 : New faceplates added (Butterfly, Mushroom, Dolphins, Palm Tree, Peacock, Mouse Ears, Weiner Dog)UPDATE 2 : <ul><li>New faceplates added (Dragon Ball Z, Motorcycle, Cat, Ghost, Magic Lamp, Ice Cream, Mandalorian)</li><li>Fusion 360 Design file, Print Profiles and RAW Files have all been modified to include a lip at the bottom of the box to help hold the faceplate and window. The Window_Thickness was not references in the sketch, it is now fixed and changing this parameter will modify the design.</li></ul>&nbsp;&nbsp;We all know multi-color printing with the Bambu printers produces a lot of waste, mostly in the form of filament poop. My design doesn&#39;t help reduce the waste produced but it does help with giving it a purpose. This shadow box with customizable size and face plates is a great way to display the colorful waste in a fun manner. It can be a great way to add a pop of color to your living room, your office or even your kid&#39;s room.&nbsp;For this design, you will need to purchase some small acrylic sheets such as these ones from <a target="_blank" href="https://www.amazon.ca/dp/B088LLCJBK?ref=ppx_yo2ov_dt_b_product_details&amp;th=1" rel="nofollow noopener">Amazon CA</a> or <a target="_blank" href="https://www.amazon.com/SimbaLux-Plexiglass-Transparent-Protective-Replacement/dp/B088LLCJBK/ref=sr_1_4?crid=22ER4N5UCMCUJ&amp;dib=eyJ2IjoiMSJ9.cdhOOX0nvijtRW_PjncZZO9dR0XJxrsNqs-evrSjIDHN_SiO4qta_my5eOF0M_pMk3Z97aFjZ6oJu9tWmE2HeKJ_8B9hq6tdb615aZra4T52WZ84XVRqd-o6pW_ElRcEcjQYYtgLlSl9tf6GsgJVYudqCmGdCqLdB3349Qk_ybm7FkDFap3QYkyu4-dkjX4CO7k12Vrb8RACnrhOzCy4q-zIef3bU9Y0gBr9gyP7UPw.ZNML7UenX66MZWG6reYkhF12HsjFSHDd9xPRDr88l_c&amp;dib_tag=se&amp;keywords=simbalux%2Bacrylic%2Bsheet%2Bclear%2Bcast%2Bplexiglass%2B5x7&amp;qid=1711399238&amp;sprefix=simbalux%2Bacrylic%2Bsheet%2Bclear%2Bcast%2Bplexiglass%2B5x7%2Caps%2C115&amp;sr=8-4&amp;th=1" rel="nofollow noopener">Amazon US</a>. Do not worry if you can&#39;t find these exact ones, as I have also included the Fusion 360 design file that is parametrized for you to customize the shadow box for yourself.&nbsp;As of right now, the face plates available in the print profile and RAW files are the following :*Note that I will be taking requests for face plates of the provided dimensions, but you can also customize one in your slicer or in Fusion 360<ul><li>Vertical Blank</li><li>Vertical Bambu Logo</li><li>Vertical Brick man</li><li>Vertical Sunflower</li><li>Horizontal Blank</li><li>Horizontal Excavator</li><li>Horizontal Golden Ratio</li><li>Horizontal Star Wars</li><li>Horizontal Brick Logo</li></ul>Assembly instructions :<ol><li>Slide the acrylic sheet and the face plate into the grove at the front of the box. I suggest having the face plate be the outermost item, that way you will be able to easily change it without making a mess</li><li>Add in the filament poop using the optional feeder funnel</li><li>Slide the cover on and you&#39;re done, it is an intentional tight fit so nothing comes out.<ol><li>An optional looser cover is provided in both of the boxes print profiles</li><li>For a 100% secure cover, use a bit of glue</li></ol></li></ol>&nbsp;How to make a custom face plate in the slicer :<ol><li>Right-Click on the blank face plate of your choice</li><li>Click on ‘’add negative part&#39;&#39; then select the ‘’load&#39;&#39; option</li><li>Select your intended file, scale it up or down and place it where you want it to be</li><li>When you slice the file, it should then cut out the loaded file from the blank face plate</li></ol>&nbsp;How to modify the Fusion 360 design fileHere are the parameters that you can change in the Fusion 360 file :<ul><li>Tolerance is used around the sliding cover and between the face plate/acrylic sheet and the walls of the shadow box. It is currently set as 0,2 mm and it worked perfectly for me.</li><li>Window_Thickness is for the thickness of the acrylic sheet. This will not affect the thickness of the face plate (1 mm)</li><li>Window_Horizontal is for the horizontal measurement of the acrylic sheet and face plate. Add the exact value without tolerance in mind.</li><li>Window_Vertical is for the vertical measurement of the acrylic sheet and face plate. Add the exact value without tolerance in mind.</li><li>Box_Depth is to adjust the depth of the shadow box as in making it more slim or thicker. This is the total outside measurement, I don&#39;t recommend you go under 30mm.</li></ul>To change these parameters, you will need to :<ol><li>in the ‘’Solid&#39;&#39; menu, expand the ‘’modify&#39;&#39; tab and select ‘’Change Parameters&#39;&#39;</li><li>You will then have this new window open up, simply change the parameter of your choice in the ‘’Expression&#39;&#39; column</li></ol><figure class="image image_resized" style="width: 66.51%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000408882/design/2024-04-01_52deddc4daa6d.png"></figure>&nbsp;Commercial License available on my <a target="_blank" href="https://cults3d.com/en/3d-model/art/filament-purge-poop-shadow-box" rel="nofollow noopener">Cults3D page</a>

p1s

工具

动物

玩具

摆件