ginjasy

hectorri

A 20mm size cube to basic print test. I made a display stand to all layer heights variants: <a target="_blank" href="https://makerworld.com/en/models/48746" rel="nofollow noopener">https://makerworld.com/en/models/48746</a> <img src="https://makerworld.bblmw.com/makerworld/draft/116605/2023-10-24_986a5722bc89.jpg">

Calibration cube XYZ

Calibration Models

MakerVerse Designs

Fully 3d printed crocs shoes<ul><li>Printed with Overture TPU</li><li>PLA for the snap button</li></ul>Important notes:<ul><li>It is for EU shoe size number 42 (male), but you can scale every part (CrocsL1,CrocsR1,Holder,Mount1,Mount2) to your size (use uniform scaling)</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-19_0266f756a989a.png"></figure><ul><li>If the shoe is too big to fit to the printers height, use the “WithSupport”-Version, rotate in Y-Axis (green) and use the cut tool in Bambu Studio to create a new flat surface parallel to the print bed<ul><li>I uploaded an .stl file without cut on the bottom for better scaling</li></ul></li></ul>&nbsp;<ul><li>There are two ways to print this:</li></ul><ol><li>Use a textured PEI bed and print it standing up without support</li><li>Or use another not so sticky bed and print it standing up with support</li></ol><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-12_cc0523cbae068.png">&nbsp;If you can&#39;t get enough of printed shoes, check out my new model (Slide Shoes, Adilette):<a target="_blank" href="https://makerworld.com/en/models/488792#profileId-401842" rel="nofollow noopener">https://makerworld.com/en/models/488792#profileId-401842</a><img class="image_resized" style="width: 41.76%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-06-08_bb258037ea2a1.png">Have fun with it and leave a like or subscribe if you like it!If there are any suggestions for improvement, feel free to write a comment.

Crocs Shoes - Fully 3d-printed

Shoes

R3DPanda

I felt obligated to improve and redesign the model. This version fixes all the small problems that the first version had and makes pulling out the PTFE tubes super easy. Additions:+Slimmer. Doesn't collide with the other tubes. +No more slipping off after removing a tube. +Looser fit. Doesn't squeeze the tubes. +Better design with less sharp edges.

PTFE Tube Remover V2.1 for the A1

Printer Tools 

All Things STL

All Things STL wine bottle holder: Does require 2 small tree supports. There are two different models one for 200x200 plates and one for 220x220 plates.  If you have a Prusa (or this size printer) print the 200x200 If you have a larger printer then you can print the 220x220 See pics for tree support. Please message me if you have any questions or issues! Scale to 73% and that works perfectly!

Calibration Models

Shoes

Printer Tools

Art/Gifts