georgepresnell.georgep13

ceo51378

I figured it was time to move to the dark side for a bit and came up with this design - in hindsight, it looks like something Sauron would be wielding if he was a Sith Lord.This is my third modular saber, following <a target="_blank" href="https://makerworld.com/en/models/460247" rel="nofollow noopener">The Guardian</a>. I will be adding additional parts to this saber in the near future including spacers, hilts, emitter and shroud designs. And yes, I am working on a D-Loop and/or Covertec fastener.The emitter pieces and hilt grip are compatible with my other ‘modular sabers’, however, the pommel and mid sections of this saber are thinner and will not be compatible with the grips on <a target="_blank" href="https://makerworld.com/en/models/460247" rel="nofollow noopener">The Guardian</a> or <a target="_blank" href="https://makerworld.com/en/models/460258" rel="nofollow noopener">The Master</a>.Print Settings:Layer Height: 0.15mm for main parts, 0.1mm for emitter and buttons.Walls: 3 for the hilt pieces, 2 for the spacersInfill: 20% for the shroud, mid section, and pommel. 15% for the rest.NO SUPPORTS - NO BRIMS - NO GLUE!! :DFilament:<ul><li>Sunlu Silk PLA - Black</li><li>Ziro Silk PLA - Black Silver</li><li>Ziro Silk PLA - Red</li><li>Sunlu Silk PLA - Silver</li><li>Overature Matte Black PLA</li></ul>Assembly Notes:Look at the pics attached on assembly. The pommel end cap has a 4mm hex hole for an allen key. Note that there are optional indexing holes in the the pommel and button bezel - these are sized to use filament as the alignment pegs.&nbsp;As always, I hope you all enjoy printing this as much as I enjoyed designing it!

CEO's Modular Sabers - The Fallen

star wars

piersonnico

Un magnifique Aigle sur son rocher ailes déployées&nbsp;&nbsp;&nbsp;

Eagle

maybe's

DKprints

Mini Stanced Kei Truck Kit Card! Prints flat and press fits together after removal from the frame. Can either fasten together with an adhesive, or leave as a press fit model. Can cut the parts out with flush cutters or a hobby knife and assemble according to the numbers on the print. Some of the parts are self explanatory and are not numbered, but the majority are. Happy Printing!

Widebody Stanced Kei Truck Kit Card

Mini Kits

PrintForFunAndFunction

Wall hanger for CGC graded comic books. Print 2 per comic, one on top one on the bottom. &nbsp;Has screw holes, but back plate is large enough for the 3"x.75" command strips.&nbsp;Printed standing tall so weight from comics isn't trying to press layers apart.

star wars

maybe's

Mini Kits

comic stuff