geoffrey.bouedo

GuyH77

NOTICE: I have learnt a lot from this design. As a result I have created a new base ramp which is now released. This design is still valid and I will continue to maintain it. It serves it&#39;s purpose of the original designed goal. I designed this scoop to aid removal of larger debris that could interfere with the bed movement. My new design is an attempt to try and improve on the removal of very small bits of plastic. That is one criticism of this design. &nbsp;Alternative Design: Only tested by me so far: <a target="_blank" href="https://makerworld.com/en/models/507985#profileId-423740" rel="nofollow noopener">https://makerworld.com/en/models/507985#profileId-423740</a>&nbsp; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -&nbsp;A simple two part print that forms a ramp at the front of your Bambu Lab printer making it easier to scoop out any stray bits of plastic.&nbsp;I printed standing up with a brim. The reason for this orientation is to get a nice smooth wall and strong clips. Split the stl to objects.&nbsp;The two halves should slide together with a snug fit. The clips help locate the scoop in the base of your printer.

X1C P1P P1S base insert | Ramp for debris removal

Bambu

DonMatis

GrinchTree is here, carrying evil plans to takeover your home decoration for Xmas!!&nbsp;Can be used in the following combinations:<ul><li>Half Christmas tree with Grinch filament painting</li><li>Grinch filament painting only, as wall decoration</li><li>Join 2 half's of the Christmas tree model to make a full Christmas tree</li></ul>Added two colour choices Green (to combine with Green Tree) and Grayscale (my traditional style to combine with Silver, Black or White Tree).&nbsp;As usual, print the Filament Painting part with 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;<figure class="table" style="width:98.42%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/180301/2023-11-17_dffb8875f5848.jpg"></figure></td><td>Filaments Used:<ul><li> PLA Overture Black</li><li> PLA PolyTerra Charcoal Black</li><li> PLA Overture Cement Gray</li><li> PLA Ziro Dark Gray | or PLA Sunlu Gray</li><li> PLA BambuLab Basic Gray</li><li> PLA Ziro Light Gray | or Overture Light Gray</li><li> PLA Overture White</li></ul>Swap Instructions:<ul><li> Start with Black</li><li> At layer #7 (0.64mm) swap to Charcoal Black</li><li> At layer #9 (0.8mm) swap to Cement Gray</li><li> At layer #11 (0.96mm) swap to Dark Gray</li><li> At layer #14 (1.2mm) swap to Gray</li><li> At layer #20 (1.68mm) swap to Light Gray</li><li> At layer #22 (1.84mm) swap to White for the rest.</li></ul></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/180301/2023-11-17_066bf072866c7.jpg"></figure></td><td>Filaments Used:<ul><li> PLA Overture Black</li><li> PLA PolyTerra Charcoal Black</li><li> PLA Ziro Translucent Green</li><li> PLA Ziro Fluo Green</li><li> PLA+ Esum Green</li><li> PLA Overture White</li></ul>Swap Instructions:<ul><li> Start with Black</li><li> At layer #7 (0.64mm) swap to Charcoal Black</li><li> At layer #10 (0.88mm) swap to Translucent Green</li><li> At layer #21 (1.76mm) swap to Lime Green</li><li> At layer #26 (2.16mm) swap to Peak Green</li><li> At layer #28 (2.32mm) swap to White for the rest.</li></ul></td></tr></tbody></table></figure>&nbsp;Highly recommend to use the provided printing profiles for good results! Looking forward to see your prints!&nbsp;<blockquote>Enjoy my work? Support me by joining my club on <a target="_blank" href="https://www.printables.com/@DonMatis" rel="nofollow noopener">printables</a>. Tier 1 offers exclusive models, while Tier 2 allows you to sell my 3D printed artwork.</blockquote>&nbsp;&nbsp;

Bambu

noel